dpwe-02

dpwe-02
Switching amplifier
DIGIPOW
with AND - function
Digitronic Automationsanlagen GmbH
Steinbeisstraße 3 • D - 72636 Frickenhausen • Tel. (+49)7022/40590-0 • Fax -10
Auf der Langwies 1 • D - 65510 Hünstetten-Wallbach • Tel.(+49)6126/9453-0 • Fax -42
Internet: http://www.digitronic.com • E-Mail: mail@digitronic.com
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
Digitronic
Automationsanlagen GmbH
Switching amplifier
DIGIPOW - DP/DC2P
Notification
This handbook corresponds with the unit version of 11.10.1999. The company Digitronic
Automationsanlagen GmbH reserves the right to implement changes that result in an improvement of
the quality and the functions of the device at any time and without any announcements.
This instructions manual was created with a maximum of care, but mistakes are not out of the
question. We are thankful for any comments, regarding possible mistakes in the instruction manual.
UP-date
You can also obtain this instruction manual on the Internet at http://www.digitronic.com in the latest
version as PDF file.
Qualified personal only
Commissioning and operation of the device may only be carried out by qualified personal. Qualified
personal are persons, authorized with commissioning, grounding and labeling devices, systems and
electrical circuits according to the applicable standards of security
Liability
(1) The salesperson is liable for any damages for which he or the rightful owner is responsible up to
the amount of the actual salesprice. Liability concerning missed profits, failed-to-appear savings,
indirect damages and consequential damage is excluded.
(2) The liability restrictions above are not valid concerning assured characteristics and damages, which
are caused by intention or coarse negligence.
Protection
The device DIGIPOW and this instruction manual are protected by copyright. All rights are reserved.
Neither the device DIGIPOW nor this document may be copied as a whole or partially, photocopied,
reproduced, translated or transferred to electronic media of any kind or into machine readable format
without prior written permission by the company Digitronic Automationsanlagen GmbH.
Note:
The products of Digitronic are so well constructed that they will not be effected by the
millenium.
Note:
This device fulfills the following norms according to electromagneticalcompatibility:
EN 55011, EN 55022, EN 55024 Teil 2, EN 50082 Teil 2, ENV 50140, VDE 0843
Teil 2, VDE 0843 Teil 4, VDE 0871, VDE 0875 Teil 3 ("N"), VDE 0875 Teil 11,
VDE 0877 Teil 2, IEC 801 Teil 3, IEC 801 Teil 2, IEC 801 Teil 4, IEC 801 Teil 5.
(c) Copyright 1992 - 2004 / Datei: DPW_E.DOC
Digitronic Automationsanlagen GmbH
Auf der Langwies 1
D-65510 Hünstetten - Wallbach
Tel. (+49)6126/9453-0 Fax. (+49)6126/9453-42
Internet: http://www.digitronic.com / E-Mail: mail@digitronic.com
Version: 11.08.04
page: 2
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
Digitronic
Automationsanlagen GmbH
Switching amplifier
DIGIPOW - DP/DC2P
Table of contents
1. Introduction .......................................................................................................................................... 3
2. Features............................................................................................................................................... 3
3. Freewheel function............................................................................................................................... 3
4. Logic..................................................................................................................................................... 3
5. Connection allocation........................................................................................................................... 4
6. Dimensions .......................................................................................................................................... 4
7. Technical data...................................................................................................................................... 5
1. Introduction
Controllings of modern industry standard have to deal with immense challenges and increasing
requirements for performance, flexibilty and speed. DIGIPOW is a switching amplifier with AND
function for two outputs that strengthens logics and accelerates switching processes. If for excample a
fast camswitch shalll be linked with a PLC-controlling, without having the effect that the slower cycle
time of the PLC slows down the switching process, the logic linkage has to be done externally.
DIGIPOW combines the advatages of and switching accelerator/perfomance booster and a logic AND
linkage in one case.
2. Features
*
proper for switching devices up to 2 x 24 watt i.e. 2 x 108 watt for type DP/DC2P/4AMP
*
dual - channel version
*
low time delay.
*
AND function for the tow outputs by ever 2 inputs.
*
high freewheel voltage of -24V DC for fast deactivation of magnetic switching devices
*
galvanic separation of the inputs
*
30mm narrow encasement made out of Thermoplast - plastic
*
encasement with convenient clip - on assembly
*
several encasements can be put in line easily
*
short - circuit - proof.
3. Freewheel function
During the switching off of magnetic switching devices, free wheeling diods cause a slower break down
of magnetic fields.them. As a consequence, the switching of time rises. Digipow accelerates the break
down of the magnetic field through a freewheel circuit of -24V DC and causes a reduction of the
deactivation time.
4. Logic
Input 1A
Input 1B
Input 2A
Input 2B
Output 1
Output 2
Version: 11.08.04
page: 3
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
Digitronic
Automationsanlagen GmbH
Switching amplifier
DIGIPOW - DP/DC2P
5. Connection allocation
Clamp
Clamp
Clamp
Clamp
Clamp
Clamp
Clamp
Clamp
Clamp
Clamp
1
2
3
4
5
6
7
8
9
10
=
=
=
=
=
=
=
=
=
=
Input 1A
Input 1B
Input 2A
Input 2B
0V for Inputs
0V for Power supply
Output 1
Output 2
+24 VDC +/-20% Power supply
+24 VDC +/-20% Power supply
6. Dimensions
Version: 11.08.04
page: 4
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
Digitronic
Automationsanlagen GmbH
Switching amplifier
DIGIPOW - DP/DC2P
7. Technical data
Supply voltage........................... 24V DC ±20%
Number of inputs....................... 4 Input, galvanically separated, every input is assigned to two inputs,
these are AND linked.
Input voltage.............................. active 16 - 30 VDC, passive 0 - 3 VDC
Input resistance......................... 2.2k Ohm
Number of outputs .................... 2
Output voltage........................... 24V
Output current ........................... 2A permanent current per output
Freewheel voltage..................... -24V DC
Delay time ................................. up to 60µs
Cabinet...................................... hardly flammable Thermoplast plastic; temperature up to 100°C
Conductor connections ............. five screw pins up to 2.5mm² in the grid measure of 5.08mm on both
sides; including label
Assembly................................... comfortable clip-on assembly on symmetrical carrier rail by EN 50 022,
leave at least a gap of 1cm for air to circulate
Disassembly.............................. by pulling back the orange colored clip catch
Dimesions ................................. see chapter 9. Dimensions
Cover type................................. cabinet corresponds with IP 40, connection pins with IP 20
Operating temperature.............. 0...+55°C
Weigth....................................... about 150g
Version: 11.08.04
page: 5
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising