How To Setup ASUS Wireless with PMII In Network Mode

How To Setup ASUS Wireless with PMII In Network Mode
Q R S P N O m a t i o n I I - H o w To . . .
Setup ASUS Wireless for PMII in Network Mode
PNOmation II
Wireless
Computer
or
Smart Phone
or
Tablet PC
ASUS or Other
Wireless Access Point
ASUS set as Ethernet Adapter
...or directly connect
PMII to Internet
PMII gets its IP address
from the server
Internet Modem
Disconnect the Ethernet cable from the PMII unit.
Using the QRS Remote Control: Press SOURCE then PROGRAM then 9 9 1.
Wait for the Network light on the PLx box to turn Yellow.
Power
System
Network
Mode
MIDI
AMI
Unplug the two cables and remove the ASUS wireless device from the piano.
Connect one end of an Ethernet cable into the ASUS Wireless.
Connect the other end of the Ethernet cable into your computer.
Connect the ASUS to the computer’s USB port for power. A USB to power plug cable is provided with our system.
Confirm that the ASUS “power” LED is ON.
Press and hold the “reset” button until the “power” LED flashes several times, then release the button.
Wait until the “power” button stops flashing. [“Reset” is the small recessed button next to the power jack]
If unsuccessful disconnect and then reconnect power to ASUS
Enter 192.168.1.220 in the address window of your computer’s web browser
The “Authentication Required” dialog box should appear.
Enter admin in the User Name and Password fields
Click OK
The ASUS programming window opens.
Click on the Adapter tab.
In the Available Network List , click on the radio button next to the SSID device
that you want to connect to.
In our case we want to connect to ASUS QRS AP, or the Access Point connected to PNOmation II.
Click the Connect button.
Click OK
The ASUS will save and restart with the new settings.
Close the browser window when this blue box closes.
Disconnect the Ethernet cable from your computer and plug the ASUS into the PNOmation II Ethernet port.
Disconnect the ASUS from power and then reconnect.
Enter QRSPNO in your Internet web browser.
You may need to discover the IP address by using the QRS remote and the PLx box. See page 2.
QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
1
Q R S P N O m a t i o n I I - H o w To . . .
Discover the Network’s IP Address
Follow the steps below if you can’t log into the QRS user interface using the QRSPNO host name.
Discover IP Address Use the chart below to note address
SOURCE then PROGRAM then 955 [_ __ . _ _ _ ] _ _ _ . _ _ _
SOURCE then PROGRAM then 954
_ _ _ . _ _ _ [_ _ _ . _ _ _]
Once you know the IP address you can enter it into your internet browser to access PMII.
We strongly suggest using Google Chrome as your internet browser
Enter as http://xxx.xxx.xxx.xxx/qrs
QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising