PT 572
PT-572+
HDMI over Twisted Pair Receiver
The PT−572+ is a DGKat™ twisted pair
receiver for HDMI signals. The PT−571
converts an HDMI signal to a single twisted
pair signal and the PT−572+ converts the
twisted pair signal back to an HDMI signal.
FEATURES
Max. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP Compliant.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
HDMI Support - HDMI (V.1.4 with 3D, Deep Color, x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD,
DTS−HD).
3D Pass-Through.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer's
BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
EDID PassThru - Passes EDID signals between the source and display.
Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when
both an active input and output are attached.
Power Connect™ System - A single connection to the transmitter or the receiver powers the system when the
devices are within 270ft (90m) of each other.
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side−by−side in a 1U rack space with the optional
RK−4PT rack adapter.
PT-572+
TECHNICAL SPECIFICATIONS
INPUTS:
1 RJ−45 connector.
OUTPUTS:
1 HDMI connector.
BANDWIDTH:
Supports up to 1.65Gbps bandwidth per graphic channel.
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
POWER SOURCE:
12V DC, 250mA.
DIMENSIONS:
6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
WEIGHT:
0.14kg (0.3lbs).
ACCESSORIES:
Power supply.
OPTIONS:
RK−4PT 19” rack adapter.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising