SM84_SPECS_rev1
SPECIFICATIONS SM84
FEATURES
• High output, two-way stage-monitor system
• 4x 8-in LF, vented
• 3-in voice coil/1.4-in exit neodymium HF (40° x 90°
coverage pattern)
• Angles up 53°
DESCRIPTION
The SM84 is a truly unique high-output two-way stage monitor. In addition to a revolutionary 4x 8-in low frequency driver configuration and split baffle design, the SM84 employs a
1.4-in exit neodymium compression driver on a unique 40°H
x 90°V angled-front horn. It is capable of 139dB SPL peak output.
APPLICATION
Applications include:
•Concert Tours
•Corporate Events
•Major Televised Events •Cathedrals
•Large Houses of Worship •Live Music Clubs
PERFORMANCE
Frequency Response (Hz)
±3 dB 60 Hz to 17 kHz
-10 dB 45 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 99
HF 110
Impedance (Ohms)
LF 4
HF 8
Power Handling (Watts, Continuous)
LF 1000
HF 200
Recommended High-Pass Frequency
24 dB/Octave 50 Hz
Calculated Maximum Output (dB SPL)
LF Peak 135.0
HF Peak 139.0
LF Long Term 129.0
HF Long term 133.0
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal 40
Vertical 90
PHYSICAL
LF Subsystem 4x 8-in, vented
HF Subsystem 3-in voice coil/1.4-in exit
neodymium compression driver
on constant directivity horn
System Configuration Full range floor monitor
Powering Mode Bi-amplified
Cabinet Type (shape) Stage monitor
Enclosure Materials Baltic birch plywood
Finish Wear-resistant textured black
paint
Connectors 4x Neutrik NL4 Speakon (2 per
side)
Grille Powder coated perforated steel
Dimensions
Inches
Millimeters
Height 12.5
318
Width 29.8
756
Depth 15.9
404
Weights
Pounds
Kilograms
Net Weight 79.50
36.20
Shipping Weight 84.50
38.40
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
SM84/2 pp
info@eaw.com
October 2001
www.eaw.com
Printed in USA
SPECIFICATIONS SM84
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
The two-way full range loudspeaker system shall incorporate a
four 8-in LF transducers and a 3-in voice coil/1.4-in exit
neodymium compression driver. Powering mode is bi-amplified.
The LF drivers shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on a constant directivity horn with a nominal coverage
pattern of 40° (h) x 90° (v).
TOP
System frequency response shall vary no more than ±3 dB from
60 Hz to 17 kHz measured on axis. The LF shall produce a
Sound Pressure Level (SPL) of 99 dB SPL on axis at 1 meter
with a power input of 1 Watt, and the HF shall be capable of
producing an output of 110 SPL on axis at 1 meter. The LF
shall handle 1000 Watts of amplifier power (continuous) and
have a nominal impedance of 4 Ohms. The HF shall handle 200
Watts of amplifier power and have a nominal impedance of 8
Ohms.
29.75
GRILLE PARTIALLY SHOWN
The loudspeaker enclosure shall be irregularly triangular in
shape with its baffle angled up 53°. It shall be constructed of
multi-ply, void-free cross-grain-laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be
finished in wear-resistant textured black paint. Input connectors shall be 4x Neutrik NL4 Speakon (2 per side). The front of
the loudspeaker shall be covered with a powder coated perforated steel grille backed with open cell foam to protect
against dust.
FRONT
The two-way full range loudspeaker shall be the EAW model
SM84.
12.50
BACK
R 13.00
.59
2X INPUT
3.00
.73
8.61
6.96
4.00
4.00
509067(A)
8/31/00
.59
15.90
SIDES
Manufacturing tolerances are +/- 0.13 and +/- 1°
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251
SM84/2 pp
info@eaw.com
October 2001
www.eaw.com
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising