AIS Class B VHF Antenna Splitter

AIS Class B VHF Antenna Splitter
AIS Class B Antenna Splitter
Easy Installation - Better Coverage
AIS Class B Antenna Splitter
The AIS Class B Antenna splitter will make your AIS installation much easier as well as save cost on additional
antennas and cables. Normally it is not possible to have
two antennas in the same frequency band at the top of
a mast on a sailingboat. The Class B Antenna splitter
solves the problem and you can optimize the coverage
on all your VHF radio equiment by being able to put the
antenna at the highest position for all the equiments.
Having optimal coverage will provide higher safety since
you can be detected in time and at the longest possible
distance in case of distress. The VHF Antenna splitter is
the first to work with two active units like a VHF and AIS
Transponder.
Multifunction
The Class B VHF Antenna splitter connects easy with the VHF antenna already installed and
provides the signal to both the VHF radio and the AIS Transponder. Your FM radio can also be
connected with the splitter. The product is recommended especially for sailboats.
GPS ANTENNA
AIX CTRX CARBON
ANTENNA
VHF SPLITTER
VHF
POWER 12-24 V DC
FM-RADIO
Technical specifications
The VHF splitter is an active splitter that blockes
the reception during transmission of any connected VHF transmitter with a maximum output power
of 25 W.
Electrical
Power supply range: 12 - 24 Volts DC (10.6 - 32)
Current draw:
<100mA cont.
VHF and AIS Antenna grounds isolated
Receiver
Frequency range:
156.000-163.425 MHz
Insertion loss:
3.8 dB
Max transmitter power: 25 W (VHF)
Max transmitter power: 25 W (AIS)
Physical
L x W x H:
120 x 120 x 60 (mm)
Mounting:
145 x 120 x 60 (mm)
Weight:
380 g
UHF (F) socket for VHF antenna connection
UHF (F) plug on flying lead for VHF radio connection
BNC (F) for FM radio connection
BNC (F) for AIS connection
2 pin circular LTW connector for power
Supplied with
• 0.5 m flying lead to VHF voice radio antenna
connector
• 1 m RF cable for AIS connection (BNC to BNC)
• 1 m power cable
• Installation and user guide on CD
YOUR SAFETY OUR CONCERN
Our mission is simple – to enhance your safety on the water. All our products are developed
and manufactured to exacting standards producing reliable, long service products with excellent functionality. Straight forward, attractive designs make your life onboard easier, safer and
therefore more comfortable in all conditions.
True Heading Dealer
www.trueheading.se
2010-03-25
Vendevägen 90
182 32 Danderyd
SWEDEN
Phone +46 8 6222660
Fax +46 8 54593910
info@trueheading.se
This document is True Heading AB copyright. The True Heading policy is that of continous research and development and is reserved to alter specification without prior notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising