• Integrated Fixed Camera/Lens Module • Innovative 3-pivot Camera Adjustment System for a Full 180° of Movement • Prewired for Quick and Easy Installation • Variety of Camera and Lens Options Available including Day/Night • Concealed Camera w/ Minimal f-stop Loss Fixed Dome Camera 0.40 10.15 0.60 15.2 Hole Ø 1.06 26.9 6.5 165.1 9.3 236 IND6 Series 5.38 137 n m 9.00 228.6 6.30 160 The Aigis IND6 Series features indoor recessed and indoor/outdoor pendant housings that include an integrated fixed camera/lens module. All versions are prewired to the top of the housing, making installation a breeze. Additionally, these units include a masked dome with a viewing window that conceals the camera/lens with minimal light reduction. Choose from a variety of camera and lens options including day/night cameras that create hi-resolution color images during the day with with high sensitivity B/W images at night. In the night mode, low light performance of 0.04 lux is achieved at f1.2/30IRE, ideal for 24 hour surveillance. The IND6 indoor recessed can be easily mounted in both sheet rock and standard drop ceilings using a quick-latch mechanism. The backbox is constructed from durable aluminum with conduit access and accommodations for safety cables making it ideal for use in plenum ceiling applications. The IND6 indoor/outdoor pendant mounted variations can be easily adapted to most environments and are available in several mounting options including pole and parapet mounts, corner, pipe and wall mounts. O R D E R I N G G U I D E E X AM P LE : I N D61RC H38N category power mounting color/day night lens range video out option IND6 1 R CH 38 N - Integrated Dome 6-inch 0 - No Voltage* R - Recessed P - Pendant 1 - 24V/50Hz PO - Outdoor 2 - 24V/60Hz Pendant Day/Night F - Fiber 213 - 2.7-13.5mm lens 75 - 7.5-50mm lens category power mounting option IND6 1 R - No Camera Versions S CH - Color High Res CS - Color Std Res DN - Day/Night 212 - 2.8-12mm lens 38 - 3-8mm lens N - Network 55 - 5-50mm lens UTP Dome 6-inch R - Recessed P - Pendant PO - Outdoor Pendant 0 - No Voltage 1 - 24V/50Hz 2 - 24V/60Hz MI - Manual Iris W - Wall Mount (Pendant only) W - Wall Mount (Pendant only) P E C I F I C A T I O N S M E C H A N I C A L S P E C I F I C AT I O N S Construction Housing Finish recessed indoor indoor pendant outdoor pendant Aluminum plenum housing, lightly tinted acrylic dome.The lower capsule has a silk-screened window with a clear viewing window. Aluminum plenum housing and a polycarbonate dome bubble Aluminum plenum housing and sunshield with a polycarbonate dome bubble Charcoal trim ring. Weight White 5.5lbs (2.5kg) dome unit w/out mounting brackets 3.8 lb (1.7 kg) 7.1lbs (3.2kg) dome unit w/out mounting brackets Flying leads w/Push Wire Connectors Cable Entry Mounting Recessed Mount Pendant, Corner, Parapet and Pole options available recessed indoor indoor pendant outdoor pendant 32ºF to 104ºF (0ºC to 40ºC) -40ºF to 140ºF (-40ºC to 60ºC) E N V I R O N M E N TA L Operating 14ºF to 122ºF (-10ºC to 50ºC) Storage -4ºF to 122ºF (-20ºC to 50ºC) Temperature -4ºF to 140ºF (-20ºC to 60ºC) 0% to 90% relative, non-condensing. Humidity 0% to 95% relative, non-condensing Enclosure Protection IP66 IP66 IP66 Fan & Heater N/A N/A Fan works continously; heater auto starts recessed indoor indoor pendant outdoor pendant 1 12-24 VAC or 12-36 VDC 50 Hz 2 12-24 VAC or 12-36 VDC 60 Hz 24VAC ±10% (60Hz ± 1%) or 12VDC ±10% Voltage Range L E N S S P E C I F I C AT I O N S OPTION Focal Range 212 38 55 213 75 2.8-12mm 3-8mm 5-50mm Iris Range f/1.4 f/1.0 f/1.4 f/1.3 f/1.3 2.7-13.5mm (5x) 7.5-50mm - 360 360 185 360 360 Iris/Shutter Format DC Auto Iris (MI - Manual Iris optional) 1/3-inch DC Auto Iris DC Auto Iris 1/3-inch 1/3-inch C A M E R A S P E C I F I C AT I O N S color OPTION Horizontal Resolution day/night -CS -CH DN 330 TVL 480 TVL 480 TVL Minimum Illumination 1.6 lux @ f/1.2/50 IRE 0.08 lux @ f1.2/50 IRE / 0.04lux @ f1.2/30 IRE 1/4-inch Image Format; Interline Transfer CCD 1/3-inch CCD Interline PAL N/A NTSC NTSC 48dB More than 50dB 1/50 (1/60 EIA) to 1/100,000 1/60 Fixed or 1/60 - 1000,000 seconds linear Selectable On/Off Control On/Off with highlight slicing White Balance Automatic Sensing through the Lens (TTL System): +2700 K to 9000 K. Auto tracking white balance (ATW) built-in component of the DSP Video Output Composite; 1.0 Vp-p, 75ohm Composite; 1.0 Vp-p, 75ohm Imager 1 2 System Signal to Noise Electronic Shutter Backlight Compensation AC Line-lock: (AC supplied) DC Crystal-lock: (DC supplied or LineLock off) Synchronization Phase Adjust Line Lock Internal (Manual Switch) 0º to 330º 0º to 180º Video BNC BNC Power Screw Terminal 1 Power input: 2 Pin screwless terminal Controls Line lock on/off; ATW/AWB hold; BLC on/off Phase Adjustment, BLC, Linelock on/off Options Includes unshielded twisted pair transmitter compatible with NVT receivers. Permits video transmission of up to 1000 ft when passive receiver is used & 3000 ft when active receiver is used. Includes unshielded twisted pair transmitter compatible with NVT receivers. Permits video transmission of up to 1000 ft when passive receiver is used & 3000 ft when active receiver is used. Connector Video Out N IND6 R ECESSED I NDOOR DIMENSIONAL OUTLINE 0.40 10.15 0.60 15.2 6.5 165.1 Hole Ø 1.06 26.9 5.38 137 in mm 9.00 228.6 6.30 160 IND6 S ERIES PENDANT MOUNT FLANGE MOUNTING OPTION IND6 S ERIES PENDANT MOUNT DIMENSIONAL OUTLINE IND6 S ERIES PENDANT WALL MOUNT DIMENSIONAL OUTLINE Mounting Hole Wire Entry Hole 3.31 84.0 2.36 60.0 3.50 88.9 3.50 88.9 1.77 45.0 1.18 30.0 Outdoor Wall Mount 4.33 110.0 5.51 140.0 1-1/2 inch 14 NPSM Threads 6.30 160.0 0.96 24.4 1.77 45.0 Ceiling Flange 7.87 200.0 11.81 300.0 10.63 270.0 Ø 8.58 218.0 9.35 237.5 12.05 306 9.3 236 Indoor Pendant 0.39 10.0 8.86 225.0 Outdoor Pendant Indoor Wall Mount MT-PTZP Pipe Mount Kit w/Flange Ø 8.58 218.0 IND6 S ERIES MOUNTNG OPTIONS 6.00 [152.4 ] 90º 46.88 [1190.6 ] 40.88 [1038.2 ] MT-PTZC Corner Mount Adapter 22.89 [581.4 ] 38.43 [ 976.1] 40.25 [1022.4 ] MT-PTZL Pole Mount Adapter MT-PTZR Parapet Mount A 3.56 [ 90.4 ] C C E S S O R I E S IND6MK: Mounting kit with support rails for suspended ceiling applications. ©2006 Aigis Mechtronics 1124 Louise Road, Winston-Salem, NC 27107-5450 Tel: 336.785.7740 Fax: 336.785.7744 w w w. a i g i s m e c h . c o m Data subject to change without notice Prelim. Draft 02/07 rev_02 Printed in U.S.A.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project