Twisted Pair Transmitter
TP-590TXR Quick Start Guide
This guide helps you install and use your product for the first time. For more detailed information,
go to http://www.kramerav.com/manual/TP-590TXR to download the latest manual or scan the QR
code on the left.
Step 1: Check what’s in the box
TP-590TXR HDMI Line Transmitter
8 Rubber feet
Power adapter (48V DC)
Quick Start guide
Step 2: Install the TP-590TXR
Mount the device in a rack (using the optional rack adapters available for purchase) or stick
the feet to the underside and place it on a shelf.
Step 3: Connect the inputs and outputs
Laptop
IR
Emitter
Projector
Controller
Laptop
1 2 3 4
TP
1 2 3 4
IR Sensor
IR Remote
Control
Always switch off the power to each
device before connecting it to your
transmitter/receiver.
Amplified
Speakers
Projector
Computer
Mouse
For optimum range and performance use Kramer's BC-DGKat623 and BC-DGKat7a23 DGKat, and BC-HDKat6a
HDBaseT cables.
Step 4: Set the DIP-switches
A DIP-switch that is down is on, up is off (default)
#
Feature
Function
DIP-switch
1
Extended Range
Enables extended range when used with either
the TP-590RXR or other receivers that support
extended range
On—Disable
Off—Enable
2
Audio Source
Priority
Sets which audio signal takes priority
On—Analog audio
Off—Embedded audio
3
EDID Lock
Locks the current EDID and prevents automatic
EDID acquisition
On—Lock EDID
Off—Automatic EDID
acquisition
4
Audio Mode
Selection
Sets the audio selection mode, (see table below)
On—Manual
Off—Auto
Step 5: Connect the power
Connect the power adapter to the TP-590TXR and plug the adapter into the mains electricity.
TP-590TXR Quick Start (P/N: 2900-300510QS REV 1)
P/N: 2 9 0 0 - 3 0 0 5 1 0 QS
Rev:
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising