DMT152 Datasheet

DMT152 Datasheet
www.vaisala.com
DMT152 Dewpoint Transmitter for Low
Dew Point Measurement in OEM Applications
The small and powerful DMT152 measures dew point down to -80 °C.
Features/Benefits
▪
▪
▪
Compact
▪
Measures dew point down
to -80 °C (-112 °F )
▪
Reduced maintenance costs
due to long calibration
interval
▪
▪
▪
▪
Fast response time
Accurate
Vaisala DRYCAP® technology
with a polymer sensor
Withstands condensation
NIST traceable
Applications: compressed air,
plastics drying, dry chambers,
pure gases, and high-voltage
circuit breakers
The Vaisala DRYCAP® Dewpoint
Transmitter DMT152 is designed for
measuring low dew point in OEM
applications, even down to -80°C .
The excellent long-term stability and
reliability of its performance is based
on the latest DRYCAP® polymer
sensor technology.
Applications
Low Maintenance
The DMT152 measures accurately
and reliably also in the challenging
combination of low humidity and
hot air, which is typical in plastics
drying.
The DMT152 mechanics have been
designed for harsh environments
requiring protection against dust,
dirt, and splashed water.
The DRYCAP® technology has a low
maintenance need due to its excellent
long-term stability and durability
against condensation.
The DMT152 is an ideal choice for
industrial applications where it
is necessary to control very low
humidity. Most typical areas of
use are air and plastics dryers, dry
chambers, pure gases, and
highvoltage circuit breakers.
Technical Data
General
Measured Variables
Sensor
-80 ... -10 °C (-112 ... +14 °F)Td
±2 °C (3.6 °F) Td
±3 °C (5.4 °F) Td
-100 ... -80 °C, -10 ... +20 °C Td
(-148 ... -112 °F, +14 ... +68 °F Td)
Dewpoint temperature (°C)
Analog output scalings
option 1
-80 ... +20 °C (-112 ... +68 °F) Td
option 2
-100 ... 0 °C (-148 ... +32 °F) Td
option 3
user-specified output scaling
when dew point is below 0 °C (32 °F) the transmitter outputs
frost point
Accuracy over temperature range
30
20
10
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-40
Not recommended
Accuracy not specified
Accuracy ±3 °C Td
Accuracy ±2 °C Td
Accuracy not specified
-30
-20
-10
0
10
20
30
40
50
60
70
Temperature of measured gas (°C)
Response time 63 % [90 %] at a gas temperature of +20 °C (+68 °F)
and pressure of 1 bar
-10 ... -80 °CTd
0.5 min [7.5 min]
-80 ... -10 °CTd
2 s [5 s]
Typical long-term stability
better than 2 °C (3.6 °F) /year
PPM VOLUME CONCENTRATION
Measurement range (typical)
Accuracy at +20 °C (+68 °F),
1013 mbar
0 ... 500 ppm
±(0.2 ppm + 20 % of reading)
Operating Environment
Temperature
Relative humidity
Pressure
Measured gases
Sample flow rate
-40 ... +70 °C (-40 ... +158 °F)
0 ... 100 %RH (up to + 20 °C/68 °F)
0 ... 50 bar (725 psia)
non-corrosive gases
no effect on measurement accuracy
Vaisala DRYCAP® 180U
Thin-film capacitive polymer sensor
Recommended calibration interval
2 years
Operating voltage with
RS485 output
11* ... 28 VDC
voltage output
15* ... 28 VDC
current output
21 ... 28 VDC
*For extended temp. down to -40 °C (-40 °F) or pressure up to
50 bar (725 psia), the supply voltage is 21 ... 28 VDC.
Supply current
normal measurement
20 mA + load current
during self-diagnostics
max. 220 mA pulsed
Supply voltage fluctuation
max. 0.3 V
External load for
voltage output
min. 10 kOhm
current output
max. 500 Ohm
Housing material (wetted parts)
AISI316L
Stainless steel mesh filter
Filter body AISI303, mesh
AISI316L, grade 18 μm
ISO G½”, NPT ½", UNF 3/4”- 16”
Mechanical connections
Housing classification
IP65 (NEMA 4)
Storage temperature range
-40 ... +80 °C (-40 ... +176 °F)
Weight (ISO G½”)
190 g (6.70 oz)
Complies with EMC standard EN61326-1, Electrical equipment for
measurement control and laboratory use - EMC requirements;
Industrial environment
Accessories
Connection cable for MI70 hand-held indicator
USB cable for pc connection
Sampling cells (available for ISO G½”)
basic sampling cell
with Swagelok 1/4” male connectors
with a quick connector and leak screw
two-pressure sampling cell
NW40 flange
Outputs
Two analog outputs (scalable)
4 ... 20 mA, 0 ... 20 mA (3 wire)
0 ... 5 V, 0 ... 10 V
Accuracy of analog outputs
± 0.01 V / ±0.01 mA
Digital output
RS485 (2-wire)
Alarm-level indication by analog signal
user selectable
Purge information
5 V, 10 V, 20 mA or LED
2.99
76
DMT242SC
DMT242SC2
DSC74
DSC74B
225220SP
1.3 3
Ø3
1.28
32.5
1.18
AW 30
G 1/2" ISO 228-1
Please contact us at
www.vaisala.com/requestinfo
www.vaisala.com
4.74
120.5
219980
219690
0.47
Ø 12
Measurement range
Accuracy
-80 ... -40 °C (-112 ... -40 °F)
-40 ... -20 °C (-40 ... -4 °F)
Non-calibrated range
1.16
Ø 29.5
DEW POINT TEMPERATURE
Ref. B210750EN-G ©Vaisala 2015
Scan the code for
more information
This material is subject to copyright protection, with all
copyrights retained by Vaisala and its individual partners. All
rights reserved. Any logos and/or product names are trademarks
of Vaisala or its individual partners. The reproduction, transfer,
distribution or storage of information contained in this brochure
in any form without the prior written consent of Vaisala is strictly
prohibited. All specifications — technical included — are subject
to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement