AN1072 - Setting up the Net2 software
Net2
AN1072
Setting up the Net2 software
The following guide provides an overview of the
steps required to configure a Net2 installation listed
in the best order in which they should be performed.
Detailed application notes are also provided.
Doors
The first section to configure when setting up a new
Net2 system is Doors. Readers must be configured
before areas, access levels, and other sections can be
set up.
AN1046 - Configuring readers and keypads
Areas
'Areas' is a feature of Net2 Professional. If anti-passback or roll call reporting is to be used, areas and area
group need to be set up. If not, skip to creating Timezones.
AN1023 - Configuring areas and area groups
Timezones
Timezones are different times of the day and week when access will be permitted. These should be
created/edited before access levels can be fully utilised.
AN1038 - Using Access Levels and Timezones
1
Net2
AN1072
Access levels
Access levels control where in a building a user is allowed and during what times.
AN1038 - Using Access Levels and Timezones
Departments
Departments allow users to be grouped together enabling quick reporting and viewing of users.
AN1041 - Using Departments
Users
'Users' are people that use the access control system. Users are identified to the system by a card, token
or PIN (or a combination of any of these). Once a user has been identified to the system, a decision can be
made on whether they are permitted or denied access.
AN1039 - Adding a new user
Operators
'Operators' are users that require access to the Net2 software.
AN1073 - Net2 operators - Adding / Assign privileges
Fire Alarm Integration
Fire alarm integration is a feature of Net2 Professional only.
AN1031 - Integrating Net2 with a fire alarm system
2
Net2
AN1072
Roll call and muster reporting
Roll call and muster reporting is a feature of Net2 Professional and can be used in conjunction with
the fire door unlock feature.
AN1032 - Using roll call and muster reports
Anti-passback
Anti-passback is a feature of Net2 Professional that enhances the security of a site.
AN1063 - Configuring anti-passback
Intruder alarm integration
Net2 can be integrated with an intruder alarm to arm and disarm the system using the access control
readers.
AN1035 - Integrating Net2 with an intruder alarm system
I/O Boards
Relay 1
Red
Relay 3
COM
N.C.
N.O.
COM
N.C.
Relay 2
N.O.
COM
N.C.
N.O.
COM
N.O.
N.C.
I/O boards can be added to a Net2 system and used for any number of different applications. The
boards need to be configured and can then be used is conjunction with Triggers and Actions.
Relay 4
AN1066 - Installing an I/O board
Brown
Orange
Yellow
Reader 1
Green
Blue
Triggers and Actions
Power
Mauve
Black
+12V
0V
Input 1
Red
0V
Brown
Blue
Inputs
0V
3V
5V
OK
Mauve
Black
Input 3
AN1067 - Using Triggers Input
and4 Actions
10/100
0V
Ethernet AN1079 - Lighting control using
Triggers and Actions
100 M
Link
Data
Yellow
Reader 2
'Triggers and
Actions' is a powerful feature, used in conjunction
with I/O boards, allowing Net2 to
Input 2
Orange
0V
automatically
Green control various systems around a building.
AN1080 - Economic control of air conditioning using Triggers and Actions
3
Net2
AN1072
Site Graphics
Site Graphics provide a visual representation of the site, allowing operators to monitor events around
the site at a glance.
AN1064 - Using Site Graphics
Cameras
'Cameras' is a feature that allows you to view live images from IP addressable cameras from within Net2.
AN1052 - Integrating IP Cameras with Net2
Camera Images integrated with Net2 Events
Net2 allows integration with camera software to provide digital images to be associated with an
event. The camera software needs to be configured before integration with Net2 can take place.
AN1053 - Integrating Net2 with Milestone software
AN1083 - Integrating Net2 with OnSSI software
AN1084 - Integrating Net2 with the JVC NVR
AN1093 - Integrating Net2 with Dedicated Micros software
AN1108 - Integrating Net2 with Pelco software
Timesheet
Net2 can provide basic time and attendance reporting when used with the Net2 Events table. Users,
Departments and Operators will automatically appear in the Timesheet programs.
AN1029 - Using Net2 Timesheet
AN1098 - Using Net2 Timeline
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising