pter not to s
For use with Digi One TS, Portserver TS 2/4/8/16, and Multi-Port Serial Cards with RJ45 connectors
Digi TS, RJ-45 to DB-25 Console Adapter
RTS
Ground
TxD
RxD
SG
CTS
DTR
2
3
4
5
6
7
8
Direction
6
8
DCD
4
7
2
3
Shell
5
20
To DB25
DSR
RTS
SG
TxD
RxD
Ground
CTS
DTR
Signal
Female DB-25
Pin 1
90000608_A
Digi TS DB25F Console Adapter (4-pack)
e-mail: info@direktronik.se
tel: 08-52 400 700 fax: 08-520 18121
All RJ45 cable adapters are 8-pin.
Altpin should be turned on when using this cable adapter so that DTR will drive DCD (standard usage).
If altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This alternative can be used if
DCD is not required, and DSR is needed instead.
This cable adapter utilizes the RTS signal of the serial device for hardware flow control (RTS/CTS).
Cable Adapter not to scale
Female RJ-45 8-pin
Pin 1
* Arrows indicate which direction the signal is flowing
DCD
1
Digi Part Number 76000699
ƒ
ƒ
ƒ
ƒ
Notes:
Signal
From
RJ-45
Digi Cable Adapters allow you to connect your serial devices using commercially available CAT 5 cable of any length. Simply plug standard CAT 5
cable into your Digi Product, connect a Cable Adapter to the other end and plug the adapter into your device.
Cable Adapters
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising