DIY Dead Drop Devices to Hide and Pass Messages

DIY Dead Drop Devices to Hide and Pass Messages
DIY Dead Drop Devices to Hide and Pass Messages
Creating your Dead Drop
Imagine with me for a few seconds and picture some places that you think could work for both covert
and overt dead drop locations. Keep in mind that these locations must be somewhere that doesn’t
cause suspicion when being left or retrieved. Perhaps a public bathroom? Walking the dog and tying
your shoe?
While you can get creative and make your dead drops ahead of time, it’s much better if you know where
and how you’re going to leave your message and mold your device with those things in mind.
Materials Needed
One item I’ve found tremendously beneficial when creating dead drops is a contact lens case. These are
about a dollar and you get a right and left container that can be broken in half, creating two dead drops.
Another thing I’ll mention is magnets, which can be both a blessing and a curse. A dead drop that I didn’t
show is one of those magnetic key hider boxes.
These are great until you go to hide your drop and realize the location you just knew would be metal
that a magnet would stick to (ferrous), turns out to be aluminum and it falls off. Luckily, I had a
contingency plan and a second dead drop ready to go when this happened! The last thing I’ll mention is
Velcro strips or adhesive strips, both work great on the back of a dead drop to quickly leave them
underneath something like a sink in that public bathroom we talked about.
Here’s a break down of everything I used for the dead drops pictured in this article:
Brut Deodorant Stick
Contact Lens Case
Green Floral Foam
Sewing Pin Cases
EZ Dose Pill Pouches (zip locks)
Floral Moss
Craft Paint (2 shades of grey)
Sponge Brush
Modeling Clay
X-Acto Knife and Blades
Velcro Strips
Pocket Knife
Hot Glue Gun
The old Dead Drop in the Deodorant Trick
The first drop I made was something I just wanted to attempt and thought would not only make a good
dead drop, but also a great hiding place. As I was searching for useful items at Wal-Mart I stumbled
upon the Deodorant and had a lightbulb go off in my head when I saw the Brut canister.
To create this drop, I simply pushed the deodorant all the way up until it broke free of the push-pop like
canister. I then cut off about 1/4 of the deodorant stick using a knife. Wanting to store a contact lens
case half inside, I knew that simply dropping it in and putting the deodorant stick back down would
leave it totally obvious and unusable if anyone ever looked inside.
If that was my goal, I’d just completely remove the deodorant and have a large storage area and replace
the cap. The problem with this is that when creating an overt dead drop, like in this case, you want to
ensure it remains as true to it’s original purpose if it’s ever discovered. If anyone stumbled upon the Brut
in question, they’d never suspect that it wasn’t regular deodorant (well maybe after reading this they
Fake Rocks and Grass Mounds
These next two drops are a bit harder to construct but are still relatively easy. The core of these rely on
that green floral foam, while the floral foam I show in the images is square, these two drops used halfcircle shaped floral foam that was found right next to the square stuff in the floral area.
What’s great about floral foam is its ability to be shaped into whatever you need. With the grass mound
drop I didn’t do too much shaping, just hot glued on some floral moss and sticks I could find outside. If I
had more time I would have gathered foliage that would match the area I planned to leave the drop.
Floral moss works well and will blend in with most grassy areas provided it’s not dead grass. On the
bottom of the grass mound drop, hollowed out and shoved a contact lens case in that fit snugly but
could still be removed. Again, a benefit of the foam is how easy it is to shape.
The fake rock was something that definitely took me a long time to sculpt. I started using my fingers to
create the angular areas of the rock until I was satisfied that it looked like a rock. I then used two
different shades of grey craft paint to dab on the color using a sponge brush. A single color just wouldn’t
have looked good and I feel the lighter shade of grey really adds to the realism.
For the last step and while the paint was still wet, I grabbed some sandy dirt from outside and sprinkled
it over the fake rock. After drying the sand stuck much better than I’d hoped and again added to the
Hopefully this article’s made your imagination run wild, thinking of all the things you can create your
own dead drops for. They don’t even have to be purpose built for dead drops, your projects can even be
hiding places for your valuables that hide in plain sight. The problem with all those overt containers you
see, like the hollowed out books or cans is that it’s the first place someone with any knowledge on the
subject is going to look.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF