Power-Pole Remote Control Installation Instruction / Warranty

Power-Pole Remote Control Installation Instruction / Warranty
IMPORTANT!
REGISTER YOUR NEW WIRELESS REMOTE CONTROL
This warranty registration card must be completed and mailed to JL Marine Systems, Inc. to
validate your warranty. Or you can save postage by registering online at www.power-pole.com.
Name __________________________________________________________________________________
Address ________________________________________________________________________________
City ___________________________________________ State ___________ Zip ________________
Email address __________________________________________________________________________
Date of purchase _________________________________________________ Age ________________
Place of purchase _______________________________________________________________________
Type of boat __________________________________________________ Length ________________
I have read and understand the warranty of this product.
Signature _______________________________________________________________________________
One (1) year warranty
Conditions of warranty
A wireless remote control manufactured by JL Marine Systems Inc. is warranted against defects
in material and workmanship in the transmitters and the receiver box, to the original owner
according to the following stipulations.
1. Wireless Remote Control warranty is activated on the date of purchase by JL Marine
Systems, Inc. You may also register your wireless remote control on our web site or
send in the registration card. Please retain your sales receipt as proof of purchase.
2. Install Genuine Power-Pole Merchandise ONLY. This warranty is void if any non
authorized parts are used or installed.
3. This warranty is void if the Power-Pole® Wireless remote control is used commercially
structurally altered or subject to stress beyond the physical limits of the manufactured
material. This Warranty is void if the Power-Pole® Wireless Remote Control is exposed
to excessive water or submersion.
1. Parts which prove defective within (90) days from the date of purchase, JL Marine
Systems, Inc. will pay for the replacement product shipping and handling fees to and
from the JL Marine Systems, Inc. manufacturing plant or some other place which JL
Marine Systems, Inc. might designate. Warranty shipping procedures only apply in the
continental USA.
2. Parts which prove defective after (90) days but before (12) months from the date of
purchase will also be repaired or replaced free of charge, but there may be a shipping
charge to JL Marine Systems, Inc. manufacturing plant or some other place which JL
Marine Systems, Inc. might designate. Warranty shipping procedures only apply in the
continental USA.
THE WARRANTY CONTAINED HEREIN IS THE EXCLUSIVE WARRANTY MADE BY JL
Marine Systems, Inc. AND THERE ARE NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR OF
MERCHANTABILITY MADE WITH RESPECT TO SUCH ANCHORS. JL MARINE SYSTEMS,
INC. IS NOT LIABLE FOR ANY INJURY OR MISHAPS SUSTAINED IN THE USE OF THIS
PRODUCT. THE USER OF THIS PRODUCT ACKNOWLEDGES ASSUMED RISKS AND
WAIVES ANY AND ALL CLAIMS AGAINST JL Marine Systems, Inc. AND ANY OF IT’S
AGENTS.
This warranty applies under conditions of normal use. The warranty does not cover:
1) defects caused by improper assembly or disassembly; 2) defects occurring after
purchase due to product modification, intentional damage, accident, misuse, abuse,
negligence or exposure to corrosive elements; 3) cosmetic damage and 4) labor or
assembly costs.
Except as provided herein, JL Marine Systems, Inc. makes no express warranties, and any
implied warranty, including without limitation any implied warranty of merchantability
or fitness for a particular purpose, is limited in its duration to the duration of the written
limited warranty set forth herein.
Except as provided herein, JL Marine Systems, Inc. shall have no liability or responsibility
to the purchaser or any other person or entity with respect to any liability, loss or damage
caused or alleged to be caused directly or indirectly by use of the product, including,
but not limited to, any incidental or consequential damages. Some states do not allow
limitation on how long an implied warranty lasts or the exclusion of limitation of incidental
or consequential damages, so the above limitation and exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary
from state to state.
___________________________________
Place
First-Class
Postage
___________________________________
___________________________________
Post office will not
deliver without
proper postage.
9010 Palm River Road
Tampa, FL 33619
Installation and programming Instructions
Wireless Remote Control
Featuring
Technology
Congratulations! Enclosed is your new JL Marine Systems Remote Control
unit featuring state-of-the-art Mag-Sync™ Technology. This package
includes your new receiver box and two pre-programmed transmitters.
Installation Instructions:
1) Mount the receiver box in an area not susceptible to submersion or
constant drenching. The receiver box should also be mounted in the
same general area as the pump and reversing relay. Mount the receiver
so that the wires are coming out from under the box on a vertical or
horizontal surface. Do not mount the receiver box upside down.
2) Attach the black ground wire directly to the -12v side of the main battery
(the same battery the Power-Pole is connected to).
3) Locate the black male/female plugs on the Reversing relay and console
switch wiring harness, coat with a small amount of dielectric grease
and connect to the mating plugs on the Remote Control box. Note: For
best results apply dielectric grease to both male and female electrical
connection. Dielectric grease included with every remote control unit.
NOTE: The two transmitters and the receiver box in this package
are matched and pre-programmed prior to shipping. The following
instructions are for any additional transmitters purchased.
Additional Transmitter Programming Instructions:
After the receiver box has been installed and attached to the
appropriate plugs:
1) Place the new transmitter on the Mag-Sync logo on the receiver box until
the red programming LED is lit. Only a current Mag-Sync transmitter
with internal magnet can be programmed using this process.
2) Push the up button on the transmitter three consecutive times at one
second intervals.
3) The receiver and transmitter are now programmed to match and are
ready for use.
Repeat these steps for additional transmitters, a maximum of five
transmitters can be programmed to a receiver box.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising