Section 6: Specifications & Capacities RC(M)5615 & RC(M)6615 Series 2 Model Numbers

Section 6: Specifications & Capacities RC(M)5615 & RC(M)6615 Series 2 Model Numbers
Section 6: Specifications & Capacities
Section 6: Specifications & Capacities
RC(M)5615 & RC(M)6615 Series 2
Specifications & Capacities
Model Numbers
RC5615 & RCM5615
Horsepower Range
RC6615 & RCM6615
50 to 250
250 HP Splitter
210 HP Center & Wing
(Blade spindle gearboxes are built heavier)
Gear Box Lubrication
Gear Lube 80-90W EP
5.5 Pints: Divider Gearbox
Gearbox Oil Capacity
10 Pints: Center deck, LH deck & RH deck spindle gearboxes
Cutting Capacity
4"
4 1/2"
Tongue Weight
1,860 lbs.
Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch
Machine Weight
5,446 lbs.
5,660 lbs.
Blade Tip Speed
At 540 RPM
Center Blades = 16,300 FPM
Wing Blades = 16,300 FPM
At 1000 RPM
Center Blades = 16,300 FPM
Wing Blades = 16,000 FPM
Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Hitch Types
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack
Standard (7,000 lbs.)
Cutting Width
15' - 0"
Overall Width
15' - 8"
Normal Transport Width
9'-1"
Minimum Transport Width
7'-6" With transport locks & deflectors removed and cylinders fully retracted
Overall Length
16' - 0"
Deck Height
12"
Cutting Height
2" to 14"
Lift Hydraulics
3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics
3" x 8" hydraulic cylinders, hoses & fittings
Wing Transport Protection
Wing transport lock pins
Deck Material
10 gauge top deck and 7 gauge bottom deck
Side Skirt Material
Bolt-on replaceable 1/4" steel
Skid Shoes
Wing Deck Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
Center Deck Replaceable: 2 skid shoes
Blades - 6 (2 per Carrier)
1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift
Blade Overlap
6"
Blade Bolt
Keyed with hardened flat washer & lock nut
3/16" Thick round dish-shaped pan, reinforced
Stump Jumper / Blade Holder
with 1" x 5" blade bar; or optional Shredder Kit
Deck Ring
Optional 1/2" x 3" fully welded
Front & Rear Guards
Optional rubber, single chain, double chain, or double chain with cable
Input Driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate Driveline
Category 5 star profile with slip-clutch
Category 4 star profile with slip-clutch or
Category 5 star profile
Wing Drivelines
optional Cat. 5 w/slip clutch
with slip-clutch
6" x 21" Laminated tires, 25.5" new tire with or without foam fill,
Tire Options
29" x 16 ply used aircraft tires without foam filling.
6 - Wheel option: 4 on transport axle and one on each wing axle
Number of Wheels
8 - Wheel option: 4 on transport axle and two on each wing axle
Transport Axle
Spring-cushioned on trailing arms
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Colors
Standard color: Beige; Optional colors: Red, Green, Orange, or Yellow
Gearbox Horsepower
250 HP Splitter
210 HP Center & Wing
58 RC5615, RC6615, RCM5615, & RCM6615 Series 2 S/N 944730+ Rotary Cutters 330-323M
12/17/15
Section 6: Specifications & Capacities
9' - 1"
6' - 1" minimum
6' - 1" minimum
7' - 6"
Transport Width
With Transport Locks &
Deflectors Removed And
Cylinders Fully Retracted
Transport Width
Without Special Adjustments.
Cylinders Are Fully Retracted.
16' - 0"
15' - 8"
26670
Dimensions shown are with center hydraulic cylinder fully extended and 24 x 7.75 aircraft tires
12/17/15
RC5615, RC6615, RCM5615, & RCM6615 Series 2 S/N 944730+ Rotary Cutters 330-323M
59
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising