Index
Index
1. Introduction ………………………….....................… 1
2. Installation of USB to Serial Converter
Under Windows 98SE………………………………... 2
3. Installation of USB to Serial Converter
Under Windows ME…………………………..……….. 6
4. Installation of USB to Serial Converter
Under Windows 2000...……………..……………….. 10
5. Installation of USB to Serial Converter
Under Windows XP..………………..……………….. 13
6. Installation of USB to Serial Converter
Under Windows Vista..…………..………………….. 16
7. Installation of USB to Serial Converter
Under Mac..………………………..………………….. 19
Introduction
Thank you for ordering the USB-to Serial Converter. The USB-RS232 Converter is an
intelligent, stackable expansion module that connects to a PC or server via the Universal
Serial Bus (USB) port, providing one high-speed RS-232 serial port. The USB-RS232
features easy connectivity for traditional serial, and others USB devices.
System Requirements
★
★
★
Pentium-class CPU with USB port PC.
1 available USB type A (downstream) port.
Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows Vista
Mac 8.6 ~ 10.3.x.
Special Note:
Follow your USB to Serial Converter installation instructions to add the device. Please
make sure your device has installed successfully and it can work on your computer.
1. Setup for Standard USB to Serial Converter /Serial Mouse Connecting your standard
device into USB to Serial Converter after installation completed. The re-plugging the
upstream port (USB Type A) of USB to Serial Converter.
★ You have to re-plugging the upstream port (USB Type A) of USB to Serial Converter
when you re-plug or change the serial devices / Serial Mouse.
2. Setup for serial modem
When prompted to select the port, choose the Serial USB (COM x), where x is the COM
port number assigned by your operating.
1
Installation of USB to Serial Converter under Windows 98SE
Note:
Do not plug the USB to Serial Converter into the system before finished the driver
installation.
„ Software Installation
Step1.
Please insert the driver CD into the CD-ROM. Setup will begin automatically.
Step2.
Click “ Next “ to continue.
Step3.
Click “ Next “ to continue.
2
Step4.
1)
2)
Select “ Yes, I want to restart my computer. “
Click “ Finish “ to complete setup.
Congratulations!! You have finished installing the USB to Serial Converter.
3
„ Verifying devices are installed successfully
1. Please move the cursor to “ My computer “. Click the mouse right button. It will
show a dialog, then click “ Control Panel “ “ System “ “ Hardware “ “ Device
Manager “. Double click “ Ports[COM&LPT] “ , it will show a new direction “ Serial
on USB [COM3] “
2. Under the same window, double click “ Universal Serial Bus controller “ , it will
Show a new direction “ USB to Serial Interface Controller “.
4
„ Un-installation
If you want to remove the USB to Serial Converter driver, please click “ Start “ →
“ Control Panel “ → “ Add Remove Programs “ , then follow the procedure:
Step1.
Select “ U232 P9/P25 V7.2.98 “ then click “ Add/Remove “ to continue.
Step2.
Click “ OK “ to continue.
Step3.
Click “ Finish “ to restart your computer and complete removing the USB to Serial
Converter driver.
5
Installation of USB to Serial Converter under Windows Me
Note:
Do not plug the USB to Serial Converter into the system before the driver is finished
installing.
„ Software Installation
Step1.
Please insert the driver CD into the CD-ROM. Setup will begin automatically.
Step2.
Click “ Next “ to continue.
Step3.
Click “ Next “ to continue.
6
Step4.
1)
2)
Select “ Yes, I want to restart my computer. “
Click “ Finish “ to complete setup.
Congratulations!! You have finished installing the USB to Serial Converter.
7
„ Verifying devices are installed successfully
1. Please move the cursor to “ My computer “. Click the mouse right button. It will
show a dialog, then click “ Control Panel “ → “ System “→
“ Hardware “ →
“ Device Manager “. Double click “ Ports[COM&LPT] “ , it will show a new
direction “ Serial on USB [COM3] “
2. Under the same window, double click “ Universal Serial Bus controller “ , it will
Show a new direction “ USB to Serial Interface Controller “.
8
„ Un-installation
If you want to remove the USB to Serial Converter driver, please click “ Start “ →
“ Control Panel “ → “ Add Remove Programs “ , then follow the procedure:
Step1.
Select “ U232 P9/P25 V7.2.98 “ then click “ Add/Remove “ to continue.
Step2.
Click “ OK “ to continue.
Step3.
Click “ Finish “ to restart your computer and complete removing the USB to Serial
Converter driver.
9
Installation of USB to Serial Converter under Windows 2000
Note:
Do not plug the USB to Serial Converter into the system before the driver is finished
installing.
„ Software Installation
Step1.
Please insert the driver CD into the CD-ROM. Setup will begin automatically.
Step2.
Click “ Next “ to continue.
Step3.
Click “ Next “ to continue.
10
Step4.
1)
2)
Select “ Yes, I want to restart my computer. “
Click “ Finish “ to complete setup.
Congratulations!! You have finished installing the USB to Serial Converter.
„ Verifying devices are installed successfully
Please move the cursor to “ My computer “. Click the mouse right button. It will show a
dialog, then click “ Control Panel “→ “ System “ → “ Hardware “ → “ Device
Manager “. Double click “ Ports[COM&LPT] “ , it will show a new direction “ Serial on
USB [COM3] “
11
„ Un-installation
If you want to remove the USB to Serial Converter driver, please click “ Start “→
“ Control Panel “→ “ Add Remove Programs “ , then follow the procedure:
Step1.
Select “ U232 P9/P25 V7.2.98 “ then click “ Remove “ to continue.
Step2.
Click “ OK “ to continue.
Step3.
Click “ Finish “ to restart your computer and complete removing the USB to Serial
Converter driver.
12
Installation of USB to Serial Converter under Windows XP
Note:
Do not plug the USB to Serial Converter into the system before the driver is finished
installing.
„ Software Installation
Step1.
Please insert the driver CD into the CD-ROM. Setup will begin automatically.
Step2.
Click “ Next “ to continue.
Step3.
Click “ Next “ to continue.
13
Step4.
1)
2)
Select “ Yes, I want to restart my computer. “
Click “ Finish “ to complete setup.
Congratulations!! You have finished installing the USB to Serial Converter.
„ Verifying devices are installed successfully
Please move the cursor to “ My computer “. Click the mouse right button. It will show a
dialog, then click “ Control Panel “→ “ System “ → “ Hardware “ → “ Device
Manager “. Double click “ Ports[COM&LPT] “ , it will show a new direction “ Serial on
USB [COM3] “
14
„ Un-installation
If you want to remove the USB to Serial Converter driver, please click “ Start “→
“ Control Panel “→ “ Add Remove Programs “ , then follow the procedure:
Step1.
Select “ U232 P9/P25 V7.2.98 “ then click “ Remove “ to continue.
Step2.
Click “ OK “ to continue.
Step3.
Click “ Finish “ to restart your computer and complete removing the USB to Serial
Converter driver.
15
Installation of USB to Serial Converter under Windows Vista
Note:
Do not plug the USB to Serial Converter into the system before the driver is finished
installing.
„ Software Installation
Step1.
Please insert the driver CD into the CD-ROM. Setup will begin automatically.
Step2.
Click “ Next “ to continue.
Step3.
Click “ Next “ to continue.
16
Step4.
1)
2)
Select “ Yes, I want to restart my computer. “
Click “ Finish “ to complete setup.
Congratulations!! You have finished installing the USB to Serial Converter.
„ Verifying devices are installed successfully
Please move the cursor to “ My computer “. Click the mouse right button. It will show a
dialog, then click “ Control Panel “→ “ Device Manager “ → “ Programs and
Features “. Double click “ Ports[COM&LPT] “ , it will show a new direction “ Serial on
USB [COM3] “
17
„ Un-installation
If you want to remove the USB to Serial Converter driver, please click “ Start “→
“ Control Panel “→ “ Programs and Features “ , then follow the procedure:
Step1.
Select “ U232 P9/P25 V7.2.98 “ then click “ Uninstall “ to continue.
Step2.
Click “ OK “ to continue.
Step3.
Click “ Finish “ to restart your computer and complete removing the USB to Serial
Converter driver.
18
Installation of USB to Serial Converter under Mac
Note :
1. Please install USB-RS232 Converter and follow the procedure as below.
2. Plug the USB-RS232 Converter into the USB port of your computer.
Step 1:
(A) Please insert the driver disk into your computer.
(B) Double click “USB Serial Support” to continue.
Step 2:
Click “Install” to continue.
Step 3:
Click “Quit” to complete setup.
19
◆ To make sure the USB to Serial Converter has installed successfully
Please move the cursor to “Hard Disk”
→
“System Folder” →
“Extensions”. It
will create new direction “Serial Shim Lib” and “USB RS232 Support”.
(A)
(B)
20
◆ Un-installation
If you want to remove the driver of USB RS232 Converter, please move the cursor to
“Hard Disk” → “System Folder” → “Extensions” then move the “Serial Shim Lib”
and “USB RS232 Support” to trash.
(A)
(B)
21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising