Night Trek

NIGHT VISION

SPOTTING SCOPE

u s e r ` s g u i d e

Important Export Restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S. Government and they fall under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce. It is unlawful and strictly prohibited to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction. Diversion contrary to U.S. law is prohibited.

F1:1.2, f50mm front lens system

IR illuminator

IR illuminator power Power switch

Battery housing

5 Diopter

FEATurEs

• Powerful 5x magnification

• High resolution Gen 1+,Image intensifier tube

• Built in Flood infrared illuminator

• Lightweight

• Water and fog resistant

• Limited Lifetime warranty

sPEcIFIcATIoNs

Total Darkness Technology ............Standard

Magnification ............................................ 5X

Intensifier Tube ..............High Res. 1st Gen +

Detection Range .......................150 m/yards

Recognition Range....................100 m/yards

Lens System .......................... F1:1.2, 50 mm

FOV ......................................................... 10°

Diopter Adjustment ................................... ±4

Resolution ......................................40 lp/mm

Power Supply .........Two 1.5 Volt Battery(AA)

Range Of Focus ....................1.5 m to Infinity

Battery Life ................................10-20 Hours

Operating Temperature ........ -25°C to +40°C

Dimensions ........ 240 mm X 60 mm X 80 mm

............................................10” X 2.3” X 3.2”

Weight ......................................0.52Kg/18Oz

APPLIcATIoN

The Night Trek has the highest magnification of a

1st generation monocular available. An amazing

5x power combined with a compact, ergonomic design makes the Night Trek an excellent unit for your night vision needs.

A 5x magnification all glass lens system combined with a high quality 1st generation + light intensifier tube gives you a bright and sharp image in any dark situation you may find yourself in. A free long-range infrared illuminator is also included to let you see even in total darkness.

Do not let darkness impair your vision for a moment longer. Whether you are camping, boating, observing wildlife or surveying your property for intruders the Hight Trek night vision device lets you see what goes bump in the night.

The Hight Trek Night Vision Monocular is a complex opticoelectronic system for individual use.

The device consists of an objective lens assembly, eyepiece and a body. The body contains 1st Gen.+ image intensifier tube assembly with an integrated high voltage power source and the three volt battery housing. When installing the battery one should keep in mind that the battery polarity should coincide with the diagram on the body next to the battery housing cap.

Objective lens protective cover is intended to protect objective lens from dust and scratches.

It also will act as a daylight filter, allowing you to test the scope in daylight or other bright light situations. The pinhole in the center of the protective cover allows a user to check an operation ability of the device in daylight conditions.

NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for more than ten (10) minutes.

The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

©2006 ATN Corp. All right reserved.

oPErATIoN

• Take the monocular out of the case.

• Put power switch and IR illuminator power switch in OFF-position.

• Install the batteries into the housing with the polarity order as shown on the scope. Battery

Type: 1.5 Volt , AA .

• Turn on the devise by turning the power switch into the ON-position. The greenish-lit screen of the image tube (when looking through the eyepiece) means that the image tube is powered.

Do not turn the unit on in the daytime without the protective lens cap on. You should see green glow in the eyepiece.

• Observe the scene and adjust the diopter for optimal image clarity.

• Turn lens to obtain a sharp image of viewed objects.

• You may now enter a dark environment or simply shut the lights off in order to darken the room.

• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus. You should not have to readjust the diopter.

NOTE: We suggest that you focus the diopter during daylight with the filter on.

NOTE: The front lens should be readjusted as you view objects at different distances.

• Avoid contact with dust, steam, and gas.

• The Night Trek is not harmful to the user or the environment.

• Do not disassemble except to clean the front lens and the eyepiece: it will void your warranty.

• Evaluate the scopes function by looking through it in a lit environment with the daylight filter lens cap on. Never use in daylight without the daylight filter lens cap on. Do not surpass ten minutes of testing.

• Never point the Night Trek at a bright light

source. If the scope shuts off automatically after directing it at a bright light source, turn the unit off and wait 1 - 2 minutes before turning the unit back on.

• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light (moon or starlight) may diminish the effective viewing distance. All technical data for this unit was compiled in a controlled environment.

• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. If you develop any symptoms, consult a doctor immediately.

INFrA-rED ILLuMINATor

Infra-red (IR) illuminators, are common to night vision. The IR light greatly enhances the performance of the Hight Trek while remaining almost totally invisible to the naked eye. The IR illuminator on the Hight Trek is located next to the front lens.

Slide the switch to turn on or off the IR illuminator.

It is important to remember that the IR illuminator is simply an infra red light source, and like any light source, it may loose its effectiveness over a great distance.

TroubLE shouTINg

Q: Flashes, flickers or clicking occur while operating

S: If it occurs within the first five minutes of inserting new batteries, it is normal and the device will resume normal operation soon thereafter. If it occurs for more than 10 minutes, contact for service instructions.

Q: Dark spots on screen.

S: These are either cosme tic blemishes in the intensifier tube or dust particles.

Q: Screen becomes darker than at previous use.

S: Replace batteries. If problem persists, contact your dealer or other authorized service representative for service instructions.

Q: Image not clear.

S: Adjust objective lens, and/or the eyepiece. such implied warranties are hereby and expressly disclaimed.

WArNINgs AND cAuTIoNs

• Always remember to turn off the Night Trek when it is not in use. If you do not plan on using your unit for a period of more than 10 days, you should remove the batteries.

• Keep lens cap/daylight filter on when not in use.

2

ATN LIMITED LIFETIME

WArrANTy

ATN Limited Lifetime Warranty is limited to the product being free of manufacturer defects in materials and workmanship. In regards to night vision products the image intensifier tube is warranted to be free from manufacturer defects for a period of 2 years (defects do not include minor black spots or blemishes in viewing area). ATN will repair or replace said products or part thereof which upon inspection by ATN are found to be defective in materials or workmanship.

As a condition to the obligation of ATN to repair or replace said product, the product must be returned to

ATN together with proof-of-purchase satisfactory to

ATN. This warranty does not cover damages caused by misuse or improper handling. This warranty is null and void if modification or maintenance is provided by parties other than ATN Corp. In the event a defect that is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse; (c) subjected to alterations, modifications or repairs by the Customer of by any party other than ATN without prior written consent of ATN; (d) special order or “close-out” merchandise or merchandise sold “as-is” by either ATN or the ATN dealer; or (e) merchandise that has been discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of ATN. ATN shall not be responsible for any defects or damage that in ATN’s opinion is a result from the mishandling, abuse, misuse, improper storage or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer.

CUSTOMER IS HEREBY NOTIFIED THAT OPERA-

TION OF THE EQUIPMENT DURING DAYLIGHT

HOURS OR UNDER ANY EXCESSIVE LIGHT CON-

DITIONS MAY PERMANENTLY DAMAGE THE IN-

TERNAL COMPONENTS OF THE UNIT AND SAID

DAMAGE WILL NOT BE COVERED UNDER THIS

WARRANTY. This warranty is extended only to the original purchaser. Any breach of this warranty shall be waived unless the customer notifies ATN at the address noted below within the applicable warranty period.

The customer understands and agrees that except for the foregoing warranty, no other warranties written or oral, statutory, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose, shall apply to the product. All such implied warranties are hereby and expressly disclaimed.

LIMITATIoN oF LIAbILITy

ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or liabilities arising out of the use of this product. Operation and use of the product are the sole responsibility of the Customer. ATN’s sole undertaking is limited to providing the products and services outlined herein in accordance with the terms and conditions of this

Agreement. The provision of products sold and services performed by ATN to the Customer shall not be interpreted, construed or regarded, either expressly or implied, as being for the benefit of or creating any obligation toward any third party of legal entity outside ATN and the Customer; ATN’s obligations under this Agreement extend solely to the Customer. ATN’s liability hereunder for damages, regardless of the form or action, shall not exceed the fees or other charges paid to ATN by the customer or customer’s dealer. ATN shall not, in any event, be liable for special, indirect, incidental or consequential damages, including, but not limited to, lost income, lost revenue or lost profit, whether such damages were foreseeable or not at the time of purchase, and whether or not such damages arise out of a breach of warranty, a breach of agreement, negligence, strict liability or any other theory of liability.

ProDucT WArrANTy rEgIsTrATIoN

In order to validate the warranty on your product, ATN must receive a completed Product Warranty Registration Card for each unit. Please complete the form below and immediately mail it to our Service Center:

ATN Corporation, 1341 San Mateo Avenue, South

San Francisco CA 94080. Products qualifying for warranty repair will be either repaired or replaced within 10 business days of receipt of merchandise unless the customer is notified otherwise.

obTAININg WArrANTy sErvIcE

To obtain warranty service on your unit, take or send the product, postage paid, with a copy of your sales receipt to our service center, ATN Corporation at the address noted above. All merchandise must be fully insured with the correct postage; ATN will not be responsible for improper postage or, missing or damaged merchandise during shipment.

For customer service and technical support, please contact

American Technologies Network Corp.

North American Office

1341 San Mateo Avenue

South San Francisco, CA 94080

Toll Free Phone: 800-910-2862

Phone: 650-875-0130; fax: 650-875-0129

European Office phone: 44(0)870-0111286, fax: 44(0) 845-

3349142

The following countries can use our toll free number 00 800 9102-8620

Austria, France, Germany, Holland, Italy, Spain,

Sweden, Switzerland www.atncorp.com