cB-OBS411 iAP Firmware - Bluetooth Serial Port Adapter

cB-OBS411 iAP Firmware - Bluetooth Serial Port Adapter
cB-OBS411 iAP Firmware - Bluetooth Serial Port Adapter - Confluence
6/03/12 3:54 PM
cB-OBS411 iAP Firmware
Added by Publisher, last edited by Publisher on Feb 28, 2012
Document Revision
Document number: 8486941
Release: Feb 28, 2012 15:39
Document version: 2
This document has sections that require an Apple MFi membership
If you have a connectBlue MFi member login please login with your user name
and password by clicking the login/logout button available in the menu next to
the search field at the top of this page.
If you are an MFi member but do not have have a connectBlue MFi member
login please contact support@connectblue.com to gain access.
For information on how to become an Apple MFi member please visit
https://developer.apple.com/programs/mfi/
You are currently not logged in as MFI member and some sections are thus
hidden
General
Bluetooth Serial Port Adapter™ firmware, cB-2119, with Wireless Multidrop™ and
Extended Data Mode support (up to 3 simultaneous Bluetooth connections). It also
contains built in support for the Apple iAccessory protocol and authentication with a coprocessor.
Please note that due to licensing requirements by Apple there are a number of terms
and conditions that must be fulfilled to be able to buy a module with this firmware. See
"cB-OBS414 Terms and Conditions" document for details.
The firmware is valid for the following Serial Port Adapter™ models:
http://support.connectblue.com/display/PRODBTSPA/cB-OBS411+iAP+Firmware
Page 1 of 2
cB-OBS411 iAP Firmware - Bluetooth Serial Port Adapter - Confluence
6/03/12 3:54 PM
OBS411i-iz, OBS411x-iz, where z is 4 or 6.
OBS414 (both PCB cB-0943-01 and cB-0951-01)
This firmware supports connections to iPod touch / iPhone / iPad
To download and/or use this firmware an active Apple MFi approval is
required. Please login with your connectBlue MFi member login to get access
to the firmware.
If you do not require support for connections to iPod touch / iPhone / iPad
please use the cB-OBS411 firmware cB-2145 instead (no MFi approval or login
required).
If you experience problems with your Serial Port Adapter™ please fill out an anomaly
report and email it to support@connectblue.com.
Version 4.0.1
Labels
obs411 obs414
http://support.connectblue.com/display/PRODBTSPA/cB-OBS411+iAP+Firmware
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising