09_199-214_Vents_and_Trim
VENTMATE VENT COVERS
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
H
VENTS & TRIM
Side Vents
Trim/Molding
Gutter Extensions
67311
Silver
LETS FRESH
AIR CIRCULATE,
KEEPS WEATHER
OUT!
67310
White
67312
Champagne
67313
Black
67314
Smoke
VENTMATE VENT SYSTEM
• Increased Air Flow
• Aerodynamic Design
• 5 Year Warranty
• Easy Installation, Hardware Included
• Available in various colors.
Matches both White and Smoke vent lids
from VentMate or CP Products for Jensen,
Elixir or Ventline.
VENTMATE
INCLUDES
UNIVERSAL RUBBER
ROOF KIT #65213
Ventmate Vent System, Each:
LS
Black #67313 5
Champagne #67312 5
Silver #67311 5
Smoke #67314 5
White #67310 5
67313
67312
67311
67314
67310
65213
65681
VENTMATE
RUBBER ROOF MOUNTING KIT
VENTMATE
DRILLING JIG
Make installation of Ventmate vent hoods even faster
and easier with the drilling jig. Simply place the jig over
the vent and drill holes using the heat-treated guides
on the jig. Fits most major brands of 14" x 14" vents.
The zinc chromate plating provides durable, longlasting protection against rust.
Mounts to the side of most popular 14" x 14" roof
vents. Eliminates the need to remove existing
vent mounting screws while also eliminating the
need to drill holes in the roof. Works with all
VentMate vent hoods.
65681 LS Drilling Jig #65681
65213 New Style Rubber Roof Mounting Kit,
1
Bulk #65213
6
= Std. Carton Qty.
5
199
H
VENTMATE REPLACEMENT LIDS
VENTS
VENTS &
& TRIM
TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
VENTMATE REPLACEMENT VENT LIDS
Fit 14" x 14" plastic frame vents. Sold and packaged two ways: individually in a box with
graphics or bagged with a header card.
Denotes Limited Supply
61630,
63111
61628, 63110
REPLACEMENT LIDS FOR
PRE-1995 JENSEN STYLE VENTS
Standard Lid for Jensen Style Vents
61629,
63112
Jensen Pre-1995
Style hinge,
plastic
Color
Box/1
Bag/1
White
61628
63110
Smoke
61629
63112
61630
63111
Amber
Price
Lifetime Warranty Lid
65487
White
Jensen
1995+ Style
hinge, plastic
65487 Lifetime
REPLACEMENT LIDS FOR HENG’s
& 1995+ JENSEN STYLE VENTS
Standard Lid for Heng’s &
95+ Jensen Style Vents
69282, 69284
Color
Box/1
Bag/1
White
69284
69282
Note when replacing Heng’s smoke vent lids:
Ventmate Smoke lids will fit Heng’s vents but
the colors are not
an exact match.
Price
69283
Smoke
Lifetime Warranty Lid
White
69283
69285
69285 Lifetime
Boxed
Vent Lids
65489 Lifetime
61635,
63118
61634,
63116
LIDS FOR OLD-STYLE (PRE-’95) ELIXIR VENTS
Lid for Pre-95 Elixir Vents
61636,
63117
Denotes Limited Supply
200
Pre-95
Elixir
hinge style
Color
Box/1
Bag/1
White
61634
63116
Smoke
61635
63118
Amber
61636
63117
Price
Lifetime Warranty Lid
65489
White
◆
Not UPS-able;
▲
Hazmat terms apply; LS Limited Supply
VENTMATE REPLACEMENT LIDS
Roof Ventilation
In Section H:
Refrigerator Vents
Plumbing Vents
Registers & Grilles
H
VENTS & TRIM
Side Vents
Trim/Molding
Gutter Extensions
VENTMATE REPLACEMENT VENT LIDS
Fit 14" x 14" plastic frame vents. Sold and packaged two ways: individually in a box with
graphics or bagged with a header card.
LOW PROFILE REPLACEMENT LIDS FOR
VENTLINE, 1995+ ELIXIR AND
HENG’s UNIVERSAL VENTS
Low profile lid. Note: for Ventline vents with a 12
volt fan, use one of the Standard Profile Replacement Lids (middle of the page) to fit over over the
large fan.
Low Profile Lid for Ventline, 1995+ Elixir
and Heng’s Universal Vents
Color
Box/1
Bag/1
White
61255
63113
Smoke
63115
Amber
63114
61255, 63113
63115
Price
63114
Lifetime Warranty Lid
White
Denotes Limited Supply
69281
STANDARD PROFILE REPLACEMENT LIDS
FOR VENTLINE, 1995+ ELIXIR AND
HENG’s UNIVERSAL VENTS
Boxed
Vent Lids
Metal hinge for
Ventline &
1995+ Style Elixir,
Heng’s Universal
Standard profile lid; fits over large fan.
Standard Profile Lid for Ventline,
1995+ Elixir and Heng’s Universal Vents
Color
Box/1
Bag/1
White
69280
69278
69279
Price
Note that Standard Replacement Lids:
Fit Elixir and Heng’s models with 12V fan
69279
Smoke
Lifetime Warranty Lid
White
65479
69280, 69278
Standard Profile
65479 Lifetime
VENTMATE
LIFETIME WARRANTY REPLACEMENT VENT LIDS
Never buy another vent lid! Impact resistant and UV stabilized.
Works on 14" x 14" power vents with 12V fans.
Lifetime Warranty Ventlid, White:
Fits Old (Pre-1995) Jensen-Style #65487 12
Fits Heng’s & 1995+ Jensen-Style #69285 500
Fits Pre ‘95 Elixir #65489 12
Fits Ventline/ ‘95+ Elixir (Fits over large fan) #65479
Fits Ventline/ ‘95+ Elixir Low Profile #69281 500
65487
69285
65489
65479
69281
6
= Std. Carton Qty.
12
201
H
MAXXAIR VENTS
VENTS & TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
• America’s first choice for RV Ventilation
• Protects your RV’s interior from rain
• Constant airflow prevents heat build-up, lets musty air,
smoke and cooking odors escape
• Proven, super-tough one piece design
• Mounts to all standard roof vents
• 6-year warranty, best
in the industry*
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
• Twice as much vent area as our original vent cover
• Solid one-piece, sleek aerodynamic design
• Hinged hardware included for easy opening and cleaning
• 6-year warranty, best in
the industry*
The Original mounts on most popular 14” x 14” standard roof
vents, and features our exclusive Zero-Leak Mounting System
that eliminates the need to drill any holes in your RV’s roof
surface. Six-year Limited Warranty. 19.5”L x 18.5”W x 9”H.
*Warranty limited to repair or replacement, see vendor’s website for details.
Stainless steel snap lock
pins remove for easy
access. Hinged brackets
provide full access for cleaning and
inspection of roof vent seal.
Now the new MaxxAir II, available in four popular colors,
with twice the vent area and with hinged hardware included,
is an even better value. Six-year Limited Warranty.
22.125” Length x 20.25” Wide x 9.5” Height.
Shell White
(Almond)
64643
64644
64645
65772
White
Black
White #00-933066 10
Smoke #00-933067 5
Shell White (Almond) #00-933068
Black #00-933069 5
*Warranty limited to repair or replacement, see vendor’s website for details.
Smoke
67277
67278
67279
67280
5
White #00-933072 5
Smoke #00-933073 5
Shell White (Almond) #00-933074
Black #00-933075 5
5
RAIN COVER FOR HIGH-POWERED CEILING FANS
New louvers with protective galvanized screen provide superior rain
protection and the new Fan/Mate for 2011 now includes hinged opening
mounting brackets to allow for cleaning and servicing of your fan.
The Fan/Mate 950 includes the same features as the Model 850 but is
colored BLACK to accent custom painted RVs. Fan/Mate® is designed
for use with high-powered ceiling fans such as Fan-Tastic TM, Comfort
AirTM, or Northern BreezeTM. The Fan/Mate® completely encloses your
ceiling fan/vent allowing your fan/vent
to open for ventilation, providing
excellent rain protection for your
RV interior. Both models feature a
high-strength polyethylene cover with
UV inhibitors, designed for years of
service. Three-year Limited Warranty.
32.5” L x 20.5” x 9.93”H.
202
• Model 850 (White) and Model 950 (Black) feature a
20 % larger vent area for better fan performance
• Both models have protective exhaust screen
and louvers
• Both models feature hinge opening mounting brackets
that provide easy access for cleaning and service
69251 Model 950 Black #00-945004
69252 Model 850 White #00-945003
◆
Not UPS-able;
▲
1
1
Hazmat terms apply; LS Limited Supply
MAXXAIR VENTS
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
H
VENTS & TRIM
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
Both models
are available as
Manual Opening or
Remote Control
Opening
• Remote control models now include backup controls at ceiling
- A MaxxFan Exclusive!
• Fan runs with lid closed to circulate air (Ceiling Fan Mode)
• Lid Available in White or Smoke
• Flush mounted, easy to clean Keypad, controls fan speed, thermostat,
air intake and exhaust
• Features a powerful 10-speed fan motor
• Provides over 900 Cubic feet of air per minute to keep you cool and comfortable
• Installs into all standard 14" x 14" RV roof openings
• 2-YEAR Limited WARRANTY with
Deluxe Models
Lifetime Limited WARRANTY on lid.
Standard Models
69857 White Lid, Manual Opening #00-04000K 1
69858 Smoke Lid, Remote Opening #00-04500K 1
69203
69232
69204
69233
White Lid, Manual Opening #00-05100K 1
Smoke Lid, Manual Opening #00-06200K 1
White Lid, Remote Opening #00-07000K 1
Smoke Lid, Remote Opening #00-07500K 1
All Weather RV
Ventilator Fan
NEW! • Features hinge opening mounting
brackets that provide easy access for
cleaning and service
• Control console at ceiling
provides 3 speed fan motor
operation with intake and
exhaust functions
• Thermostat model provides automatic operation
• Large 12” diameter, 10-blade fan prevents heat build-up, odors and musty air
• 2-year Limited warranty
• Powerful 12-volt, 4-amp motor provides more than 900 CFM on highest speed
MaxxAir’s Turbo/Maxx® provides maximum ventilation even when it rains. Remove musty air, smoke and
cooking odors while preventing heat build-up. The Model 1200T WITH THERMOSTAT allows the fan to
cycle on and off when you’re gone. Simply adjust the thermostat to your desired temperature.
The Turbo/Maxx® attaches directly to your existing 14” x 14” standard roof vent.
Both models feature a white, high density polyethylene rain cover with UV inhibitors.
Two-year Limited Warranty.
61895 1200T With Thermostat #00-965001
64920 3550 No Thermostat #00-965007 1
1
Louvered Window Vent
• Provides refreshing cross
ventilation • Ideal ventilation for pets
• Mounts to left or right hand sliders
up to 33" tall • Window fully opens
and closes as before.
61497 Window/Maxx
#00-455000 6
ZERO LEAK KIT. Original Hardware
Kit for re-installation of the original MaxxAir Vent Cover. Mounts to
the vent side wall to avoid drilling holes
in your roof. Stainless steel and aluminum. Not to be used for Fan/Mate,
Turbo/Maxx or MaxxAir II.
65252 Zero Leak Kit
#00-225000
5
MaxxAir products are protected by U.S. Patent Nos. 7,004,832; 5,309,972; 5,672,101; 5,897,435; D.376,007; D.330,415; D.320,267; D.391,632; D463,541 S and other Patents Pending. Fan-Tastic VentTM is a registered trademark of Fantastic Vent Corp.
Coleman is a registered trademark of the Coleman Co., Inc. Comfort Air is a registered trademark of SHURflo, LLC Northern Breeze is a registered trademark of Ventline, Divn. of Philips Products, Inc.
6
= Std. Carton Qty.
203
H
ROOF VENTILATION
VENTS & TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
MODEL 8000
CREATE-A-BREEZE
Three fan blade
speeds (low,
medium, high),
and a manual
dome lifting knob.
Model 8000
C-A-B by Fan-Tastic Vent is
an entry level best-in-class
fan that is great for bathrooms or any 14” x 14”
opening in your RV.
1 year limited warranty
(all parts).
62316
66374
FAN-TASTIC VENT WITH 12V FAN
Technical Information:
• Durable, proven longevity. • Quiet, 12-volt
ceiling vent with 3 speeds. • ASA Dome /
1 year warranty. • Removable screen for easy
cleaning. • Low AMP draw insures full-time use.
Specifications: • Rooftop weight: 8 lbs.
• Outside dimensions: 16.5” x 16.5” x 4.5”.
• Performance SCFM/Amps/Decibels:
High - 920/3.00/40; Medium 653/2.29/39;
Low - 478/1.86/39.
66607 12V Create-A-Breeze Ceiling Fan
#8000
4
* See also
12V Power Converter
(Coast#10002 on p71)
12-VOLT
“ENDLESS
BREEZE” FAN *
Fan-Tastic Vent is an investment in comfort. It
provides immediate air exchanges with minimum
12-volt power usage. It’s one of the most used
appliances in any rig. Fresh, clean, outside air
can be yours without generators, air conditioners or engines operating. All models fit standard
14” x 14” opening; and are 16.5" x 16.5" x 4.5".
All have removable screen for easy cleaning.
Choose fan blade direction (OUT for exhaust or
IN for air intake). CSA certified; UL listed.
Model 6600R with Hand Remote:
Fresh air in the palm of your hand™!
No need to run wires down the wall...or bring a
chair to reach the high ceiling! This air exchange
system for the RV includes a hand held radio frequency remote that makes operation as simple
as sitting in your easy chair and pushing a button. A convenient wall cradle lets you choose an
easily accessible location, install the lightweight
cradle, and operate the fan from the cradle, or
remove the remote and operate from anywhere
inside or outside your coach. 14 speed fan
including reverse, Rain Sensor, automatic variable speed (Thermostat actuated) mode.
Model 6000RBTA
Just select your speed from this 3-speed model.
Features Automatic Dome Opener with built-in
Rain Sensor. Flip a switch and the dome opens
or closes. Or when the sensor gets wet, the
dome automatically closes; opens again when
sensor is dry. Built-in thermostat helps keep the
interior cool.
A manual opening, 3-speed vent with reverse
and thermostat. Hand crank open the dome, pick
IN or OUT and your fan blade speed, set the
Endless Breeze is a high volume 12-volt fan
with a 12" blade and operates at three speeds.
Air movement of up to 1000-CMF (cubic feet per
minute) is a major breakthrough in 12-volt
portable fans. Standing only 14" H on retractable
legs, and less than 3" thick, it travels and stores
easily. Weights under 5 lbs. Endless Breeze can
be powered by any 12-volt power source such as
automobile lighter outlets or by connecting
jumpers to any 12-volt battery. Maximum draw
is less than 3 amps/hour. Comes with a
6' cord. Operates efficiently up to 14' from
its power source.
12931 12-V Box Fan #1100WH
204
1
thermostat and the blades will start and stop
according to the chosen temperature. Perfect for
when you leave pets behind or while sleeping.
Model 4000R
A manual opening, 3-speed vent with reverse.
Hand crank open the dome, choose IN or OUT
and your fan speed. Fan blade is activated when
dome is opened approximately 2”.
Rain Sensor models have fully automatic opening and closing dome. When the rain stops, the
dome re-opens.
Fan-Tastic Vent:
66374 Model 6600R 14-Speed 12V Fan
Model 5000RBT
A new
practical
application
for your favorite pet!
inside view
of 62316
with Reverse, Cradle, Thermostat, Automatic
Opening Dome, Rain Sensor, Remote & Cradle
#6600R-417 4WH 4
62316 Model 6000RBT 3-Speed 12V Fan
with Reverse, Thermostat, Automatic
Opening Dome, & Rain Sensor
#6000RBT-BRIGHT WHITE 4
62467 Model 5000 RBT 3-Speed 12V Fan with
Reverse & Thermostat, Manual Opening
#5000RBT-BRIGHT WHITE 1
62466 Model 4000R 3-Speed 12V Fan
with Reverse, Manual Opening
#4000R-BRIGHT WHITE 1
FAN-TASTIC
POP’N LOCK SCREEN
We are happy to introduce the new Pop ‘N Lock
Screens, allowing pop-in screen installation and
replacement. The clip-on feature
eliminates having multiple screws to install,
making maintenance and cleaning a snap.
The Pop ‘N Lock screens are made of
high-impact polystyrene and will replace
all existing screens, covering up old screw holes
and giving an attractive, sealed fit.
Pop'n Lock Screen, Bx/2:
67321 Off-White #K2035-80
67322 White #K2035-81 15
Pop’N Lock fits any
Fan-Tastic Vents!
2
◆
Not UPS-able;
▲
67322
Hazmat terms apply; LS Limited Supply
ROOF VENTILATION
Roof Ventilation
In Section H:
Refrigerator Vents
Plumbing Vents
VENTLINE
VENTADOME
14" x 14" VENT
WITH RADIUS CORNERS
H
VENTS & TRIM
Registers & Grilles
Powered, 14" x 14"
Ventadome has
a 100cfm fan for
extra circulation.
Side Vents
Trim/Molding
Gutter Extensions
Another product improvement by Ventline
that makes cleaning a snap!
After 40+ years of the same look,
Ventline has revolutionized
the 14” x 14” roof vent!
65560
69540
Phase I: Ventline’s new aerodynamically shaped
dome has 4X the impact strength of other
polypropylene covers on the market. The
improved lift mechanism provides a smooth
operation and eliminates chatter. The slide
mechanism has more surface area contact,
making the guide bar stronger and allowing
better distribution of stress.
Phase II: Snap-out screen easily detaches for
cleaning. The ceiling garnish and crank handle
remain in place no screws to lose.
Non-Powered New Style Ventadome:
67545 Birchwhite #V2092SP-25 1
67552 Bright White #V2092SP-28 1
67551 Smoke #V2092SP-27 1
Powered New Style Ventadome:
67553 White, 12V #V2094SP-28 1
69540 Fan Blade for standard unit
#BVD0215-00 1
WEDGE SHAPE R REPLACEMENT DOME
FOR VENTLINE NEW STYLE VENT
67542 White #BVD0449-A01 12
VENTLINE SCREEN*
FOR STANDARD VENTADOMES
Simply detach the screen by pinching the tabs
located around the perimeter. There is no need
to remove the ceiling garnish or the handle!
The new frame with removable screen replaces
the old style single piece screen.
REPL.. FRAME WITH REMOVABLE SCREEN
66591
Operating Knob
VENTADOME 14" x 14" VENT
WITH RADIUS CORNERS
Non-powered Ventadome roof vents with tough
plastic translucent covers provide maximum
light and air capabilities. Steel constructed;
easy-open operation, heavy-duty screens and
superior weather seals. Rough-in opening is
14-1/4" square. Sun-resistant domes are
high-impact polypropylene plastic. Molded-in
color, plus a special UV ray inhibitor keeps color
vibrant year after year.
(Not shown) #V2128-511-00
5
Corner Roof Vents, White
#VA0445-26 48
KNOB OPERATOR
Ventline Standard Height Cover
69278 White, Bag/1 #69278 5
69279 Smoke, Bag/1 #69279 500
VENTADOME REPLACEMENT PARTS
69749 12V Repl. Motor Kit; Included in the kit
is the VD0218 motor, motor lead wires, screws,
instruction sheet and a drill template to retro-fit
theVD0218 motor to the brackets used with the
older motors (screw hole spacing is different)
#BVD0218-00
1
65015 Repl. Operator w/crank handle and
screw #BV0115-04 W/SCREW
20
66591 Ventadome Knob Only
#BVD0421-15
15
65017 Repl. Operator with extension, crank
handle and screw #BV0115-02
20
64924 Fan Blade f/12-V roof Ventadome.
6-Blade CCW; fits .125 dia. round shaft with
knurl; 6" dia.; White #BVC0466-00 1
46596 Vent Crank only (with bolt)
#H710
1
64365 Vinyl Seal, 51" #BVD0455-01 60
66030 Push Button Switch f/Vanair Vent
#BV0199-04 1
6
= Std. Carton Qty.
REMOVABLE SCREEN
Removable Screen Portion only:
68801 Birch White #BVD0434-31
68785 Polar White #BVD0434-41
1
1
• Please note that the pocket of the new screen is
slightly different than the old screen. Customers
may require a different length ceiling garnish.
61113 White, 110-V, without Garnish
65566 2-1/8" Plastic Garnish for Radius
VENTLINE STANDARD
HEIGHT REPLACEMENT
LID FOR VENTLINE VENTS
Birch White Frame w/remov. screen (2 pces):
68788 For Standard 12V Powered Roof
Ventadomes, Comes with rocker switch and
wires, For models V2094, V2193 and V2394
#BVC0573-31R 40
68787 For Standard Non-Power Ventadomes
#BVC0573-31 40
Ventadomes now feature a knob operator,
replacing the traditional L-shaped crank
handle. The round knob (66591) provides an
easier grip and allows for a smoother operation
of the lift assembly. The knob also detaches
easily, permitting faster screen removal and
cleaning. The knob is interchangeable with the
L-shaped crank, so you can also use it on older
vents.
NEW 2 PIECE SCREEN
GARNISH INSTALLED
(VC0573TAB) VS
MODEL#
WITH... OLD SINGLE PIECE SCREEN
(VA0444TAB)
3” to 3-15/16”
VA0445-27
V2092
2-7/8” to 4”
2” to 2-15/16”
V2094
VA0445-26
1-7/8” to 3”
1” to 1-15/16”
V2110
VA0445-25
7/8” to 2”
New Style
Old Style
METAL COVER VENTADOME
Non-Powered 14" x 14" Ventadome with
Metal Cover, Radius Corner Screen Frame and
Ceiling Garnish:
65560 Metal Cover Vent, Radius Corner
#V2110SP-23 1
60759 Replacement Metal Dome
#BV0534-00 20
65565 1-1/8" Plastic Garnish for Radius
Corner Roof Ventadomes, White
#VA0445-25 1
Garnish only
62320 31/8 " Plastic Garnish for radius corner
roof ventadomes, Birch White
#VAO445-27 34
SEE PAGE 201 FOR REPLACEMENT LIDS
FOR VENTLINE VENTS SHOWN
ON THIS PAGE
205
H
ROOF VENTILATION
VENTS & TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
Garnish
sold
separately
60750,
60751,
60752
HENG’S INDUSTRIES
STANDARD MOUNT PAINTED
METAL BASE VENTS
Features: • Self-Centering Device eliminates
installation guesswork and assures perfect alignment in roof opening. • Attractive radius
corners are standard. • Screen allows air
through while keeping insects out. • Positive-seal
weather-stripping is leak-resistant and water
tight. • One-piece seamless frame with a deep
drawn painted metal base. • Hinge: Heng’s and
1995+ Jensen style without hinge pin.
Advantages: • Acrylic UV-Resistant translucent
lid conforms to Federal Motor Vehicle Safety
Standard (FMVSS; No.205 glazing materials).
• Injection molded telescoping garnish accomodates a variety of roof thicknesses. • Hand crank
to open and close lid securely.
COLONIAL WHITE METAL BASE
Non-powered (Screen Frame Is Pure White)
60750 Bronze #V773401-C1G1 10
60751 Smoke #V774401-C1G1
60752 White #V771401-C1G1
10
10
With 12V Fan Only:
HENG’S INDUSTRIES
ESCAPE HATCH / EXIT VENTS
Features: • Fresh air ventilation: A turn of the
crank provides a large vent area. Lets air
through, keeps insects out. • Includes opaque
white plastic lid. • Sturdy frame installs easily
and is made of heavy aluminum extrusion to
assure secure mounting. • Dependable operation featuring leak-resistant lid and weather-tight
frame. • White garnish included.
Advantages: • Instant exit. Screen opens
quickly to assure fast exit through opening.
• Largest selection: 13" x 20" to 26" x 26".
• A strong fine mesh screen.
ESCAPE HATCH / EXIT VENT W/WHITE LID
60255 15" x 22" Escape Hatch, with 4 pc.,
2" White Metal Garnish; Cutout: 17-1/2" x
24-1/2" #58621-C2 5
61631 17" x 24" Escape Hatch, with 4 pc.,
2" White Metal Garnish (RVIA); Cutout: 19-1/4"
x 26-1/4" #48621-C2 1
60372 26" x 26" Escape Hatch, with 4 pc.,
2" White Metal Garnish (RVIA); Cutout 25-7/8" x
25-7/8" #68631-C2 1
REPLACEMENT DOME
60749 Vent with Smoke Lid, 12V Fan, Colonial
White Metal Base #V774402-C1G1
HENG’S
INDUSTRIES
STANDARD MOUNT
UNIVERSAL VENTS
10
Replacement Late-Model Lid, no pins required,
for Heng’s vents shown above:
62007 LS Amber Lid #J7291BZ-CR 10
62008 LS Smoke Lid #J7291SM-CR 10
69282 White Lid, Bag/1 #69282 500
69284 White Lid, Box/1 #69284 500
Additional Replacement Parts for above vents:
61974 Deep Garnish for 14" x 14" Vents,
(fits ceilings 2 1/2 " – 4 1/8 " thick, measures
3 3/8 " from top to bottom), White
#JRP1120B 40
Lid Size #90007-C1
See pages 200-201 for additional
replacement lids for above vents.
1
60256 For 15" x 22" Vent, 18-1/2" x 25"
REPLACEMENT PARTS FOR ABOVE VENTS
Lid Size #90008-C1
White Garnish, 1-1/4" Wide Mounting Flange:
69636 1-1/8" Vertical Leg #90090B 10
69638 3" Vertical Leg #90092B 20
69639 4" Vertical Leg #90094B 20
69749 12V Repl. Motor Kit; Included in the kit is
1
61624 For 17" x 24" Vent, 19-3/4" x 26-1/2"
Lid Size #90088-C1
1
The 60371 style dome has a 1-5/8" H hinge
plate, and one track down the middle. Fits vents
made 1995 to date. 26" x 26". Opaque.
60371 For 26" x 26" Vent, 26-1/2" x 26-1/2" Lid
Size #90014-C1
1
#90014OS-1
1
65390 Screen Frame, White. Garnish
telescopes inside screen frame
#90106-C1 60
65484 Jensen, 1/8" D Bore, CW, CD/1
1
#65484
65012 Operator
1
REPLACEMENT PARTS FOR DISCONTINUED
JENSEN ASTRO-ROOF VENT
Parts for the Astro-Roof vent with instant
escape release hatch. Vent no longer available.
Replacement Parts Only:
60174 22" x 22" Dome
#J294X22WH
the VD0218 motor, motor lead wires, screws,
instruction sheet and a drill template to retro-fit
theVD0218 motor to the brackets used with the
older motors (screw hole spacing is different)
#BVD0218-00
OLD STYLE REPLACEMENT DOME
60882 Old Style Replacement Lid
206
Galvanized Base, Non-powered
(Screen Frame is Pure White):
69633 Amber #73111-C1G1 10
69635 Flat Galvanized #75111-C1G1 10
69634 Smoke #74111-C1G1 10
69632 White #71111-C1G1 10
Replacement lids for above plus Elixir vents
1995 and newer (universal) & Ventline vents:
61345 Metal f/69635 #90114-C1 10
61334 White f/69632 #90110-CR 10
60272 For Old-Style 13" x 20" Vent, 15" x 22"
The old style dome has a 2-1/4" H hinge plate,
and one track down the middle. Opaque white.
26" x 26".
SEE PAGE 200 FOR ADDITIONAL
REPLACEMENT LIDS FOR
HENG’S VENTS SHOWN ABOVE
Features: • Self centering
metal base w/radius corners.
• Interior garnish w/wider 1-1/4"
flange and radius corner. • Available in standard, 12-volt, CSA and UL approved 110-volt.
• Designed to withstand excessive wind and
weather. • Hinge: Crimp sheet metal.
Advantages: • Universal, fits all rough openings. • Flange covers all screws holes.
• One piece metal frame, deep drawn metal
base. • Covers all interior stains left by previous
garnishes. • Positive-Seal weather stripping is
leak resistant and water tight. • Interchangeable
with existing Elixir and Ventline products.
1
◆
for 14" Elixir &
Jensen Vents,
w/o Crank Handle,
6" Arm Length,
1/Bag #JRP1000R-C 5
41361 Replacement Operator, 6" Arm Length
w/Crank Handle, (same as #65012) CD/1
10
#814CK
60178 Crank Handle for replacement operator,
Metal, 3/Card #JRP2160R-C 5
Not UPS-able;
▲
Hazmat terms apply; LS Limited Supply
ROOF VENTILATION
Roof Ventilation
In Section H:
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Trim/Molding
Gutter Extensions
69641
STANDARD MOUNT PLASTIC BASE
JENSEN-STYLE VENT by
HENG’S INDUSTRIES
Features: • Exclusive Self-Centering Device
eliminates installation guesswork, assures
perfect alignment in roof opening. • Attractive
radius corners are standard. • Screen allows air
through, keeps bugs out. • Positive-seal weather
stripping is leak-resistant and weather-tight.
• Hinge: Jensen-style slotted.
Advantages: • Acrylic UV-Resistant translucent
lid conforms to Federal Motor Vehicle Safety
Standard (FMVSS). • Hand crank opens and
closes lid securely. • 14" x 14" vents with
1-1/2" (vertical leg) white garnish and white
screen. • Individually boxed.
WHITE BASE, NON-POWERED
60101 Amber #V073101-C1G1 10
60102 Smoke #V074101-C1G1 10
60100 White #V071101-C1G1 10
WHITE BASE, WITH 12-V FAN
60012 12V, White
Saves installation time!
Remote switch included in
#61450 Power Lift Roof Vent
WHITE BASE, WITH 12-V FAN & LIGHT
Vent with integral 12-volt light has a translucent
plastic lens and four 3-watt low-voltage lights.
62430 Lighted Vent, White with 12-V Fan
#V071112-C1G1 10
69631 Replacement Lens for Jensen
V071112 or V071142 #JRP1161R-C 5
WHITE BASE, 12V FAN, LIGHT & POWER LIFT
Vent with power lid-lift uses 12-volt DC motor
operated by a convenient remote switch.
61450 Vent with White Plastic Lid, 12-V Fan
and 12-V Lights for 1"-2-9/16" Roof Thickness
#V071142-C1G1 10
SEE PAGE 200 FOR
REPLACEMENT LIDS
FOR HENG’S VENTS
SHOWN ABOVE
10
#V971201-C1G1
#V971202-C1G1
60763 Replacement Dome (Lid) for
V2047-01 Exit Vent, white; nominal overall
flange size 24" x 24"; rough opening of
22” x 22”; #BV0586-04 1
65020 Replacement Operator with
Guide Roller, Crank Handle and Screw
#BVA0179-00 W/SCREW 1
10
ROOF VENT
OPERATOR
This convenient 9" x9" lightweight vent is ideal
for providing fresh air in small places such as
bathrooms, passageways, galleys, etc.
This mini vent is weatherproof due to the quality
high-impact plastic used in its construction.
60267 Colonial white opaque 9” roof vent
with 7/8" plastic garnish, Boxed
High RV Ceiling Vents
Are Now Within Reach!
VENT
OPERATOR KIT
No more foot stools or ladders. The VentStick
makes it easy to open and close any RV vent in
seconds and lets you do it with both feet firmly on
the ground. The special knob installs in minutes.
1/card, with screws.
Roof Vent Operator, CD/1:
10
Vent Operator Kit: :
41066 5" Arm Length #806CK
41361 6" Arm Length #814CK
10
THE VENT STICK
10
10
10
SEE PAGE 200
FOR REPLACEMENT
LIDS FOR
HENG’S VENTS
SHOWN ABOVE
9" X 9" “
MINI ROOF VENT”
#17511-C1G
= Std. Carton Qty.
Features: • Self-Centering Device eliminates
installation guesswork and assures perfect alignment in roof opening. • Exclusive four-screw
inside flange mount feature for attaching base
garnish to lid mount. Saves labor on installation.
• Screen allows air through while keeping insects
out. • Attractive radius corners are standard.
• Positive-seal weather-stripping is leak-resistant
and water tight. • One-piece seamless frame
with a deep drawn painted metal base. • Unique
integral hinge system on lid. Advantages:
• Acrylic UV-Resistant translucent lid conforms
to Federal Motor Vehicle Safety Standard
(FMVSS; No.205 glazing materials). • Injection
molded telescoping garnish accomodates a
variety of roof thicknesses. • Hand crank to open
and close lid securely. • Hinge: Heng’s & 1995+
Jensen style without hinge pin.
69641 Vent with 12V Fan, White
Parts for the discontinued model #V2047
(22" x 22", pictured above) and for the
discontinued model #V2052 (15 1/2 " x 22 1/2 ").
44100 4" Arm #794CK
44108 5" Arm #898CK
41067 7" Arm #807CK
HENG’S
INDUSTRIES
CLAMP STYLE
PAINTED
METAL
BASE VENTS
PURE WHITE BASE SCREEN FRAME
69640 Non-Powered, White
REPLACEMENT
PARTS
FOR VENTLINE
EXIT DOMES
6
Side Vents
62430 or
61450
60100,
60101, 60102
#V071102-C1G1
H
VENTS & TRIM
10
10
66081 VentStik with1 Knob #29070
66080 Knob 2-Pack with rings
#29103
1
1
207
H
ROOF VENTILATION • FANS
VENTS & TRIM
Roof Ventilation
In Section H:
Refrigerator Vents
Plumbing Vents
Registers & Grilles
65483 Ventline, 1/8" Round Bore,
CCW, CD/1 #65483
67252 Ceiling Fan with Wall Switch
12-V Powered Vent Fan Blade:
Don’t just move air, create a VORTEX!
Update your old, inefficent powered vent easily
without replacing the entire vent or compromising the rooftop seal. Just replace your existing
screen with the Vortex upgrade kit. Make your
outdated vent more powerful without buying a
whole new and expensive vent.
Replacement is easy and only a Phillips
screwdriver is needed. Tampering with the
rooftop seal is NOT necessary. The Vortex vent
works with Ventline, Jensen and Elixir powered
U.S. vents. Nonpowered vents can be converted
with some additional wiring.
69150 Vortex Fan Replacement Kit
#90043-CR
1
65484 Jensen, 1/8" D Bore,
HENG’S INDUSTRIES
VORTEX FAN REPLACEMENT KIT
8
65012
60178
67249
Gutter Extensions
Experience the comfort, style and convenience
of a ceiling fan in your recreational vehicle.
This 4 blade, 42” designer hugger, 12 volt ceiling
fan features four speeds plus reverse, a mounted
wall switch, and a low profile (6” off ceiling).
Contemporary white design matches most
decors. Individually boxed. Easy to install.
Low 1.18 amp draw.
REPLACEMENT 6 FAN BLADES
“6” fan blades for 12-v powered roof vents and
range hoods. White, impact-resistant plastic.
Direction of spin is determined by looking down
through the motor, at the top of the blade.
... to this!
Trim/Molding
LASALLE
BRISTOL
12V
CEILING FAN
VENTMATE FAN BLADES
From this...
Side Vents
#410RV42WH
CW, CD/1 #65484 1
65485 Ventline & Pre ‘95 Jensen, 1/8"
D Bore, CCW, CD/1 #65485 1
65491 Current Ventline, 3/32" Round Bore,
CCW, CD/1 #65491 1
12-V Powered Range Hood Fan Blade:
65484 ‘95-Present Jensen, 1/8" D Bore,
CW, CD/1 #65484 1
65485 Pre ‘95 Jensen, 1/8" D Bore,
CCW, CD/1 #65485 1
1
NEW!
JR PRODUCTS
METAL VENT CRANK
Replacement Metal Vent Crank will fit most
applications. Made of die cast steel for long
lasting use. Replacement screw included.
45179 Metal Vent Crank, Packaged
#20305
ADCO
VENT COVER
Vent Cover insulates
and blocks sunlight, moonlight
or street lights
from your RV’s
interior. Installs and removes easily in seconds
using supplied Velcro. Rugged, durable vinyl
with reflective silver finish on one side provides
better insulation and blocks heat. 18" x 18"
overall size to cover virtually any 14" x 14" roof
vent. White/Silver color. 3-yr. mfr. warranty.
86045 Vent Cover #7172
24
RV DESIGNER
VENT CRANK
Fits Jensen, Elixir &
Ventline vents. 2" crank with 3/4" shaft.
Metal. Bolt included, Pk/1.
46596 Vent Crank #H710
1
1
JR PRODUCTS VENT
INSTALLATION KIT
JENSEN VENT REPLACEMENT
PARTS by HENG’S INDUSTRIES
Motor for 12-volt power vents,
fits Elixir, Heng’s, Jensen & Ventline.
RV DESIGNER VENT/
ACCESSORY MOUNTING KIT
67249 12-V Motor, with D Shaft
#90037-C1
5
65012 Operator for 14" Elixir & Jensen Vents, w/o
Crank Handle, 6" Arm #JRP1000R-C
5
60178 Vent Crank Handle; Metal, CD/3
#JRP2160R-C
208
5
Use to seal and attach vent or any accessory
mounted to the outside of an RV. Includes 8'
of white, 3/4" putty tape & 24 #8 screws.
65373 Vent Mounting Kit #E451
Vent installation kits have
everything you need to
replace your existing vent
or install a new one.
Comes complete with
36 screws and 8' of
putty tape. Packaged in
convenient, resealable
clamshell.
65051 Vent Installation Kit #04162
67502 Butyl Vent Installation Kit
#04182
12
◆
Not UPS-able;
▲
12
18
Hazmat terms apply; LS Limited Supply
VENT ACCESSORIES • CEILING FANS
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
H
VENTS & TRIM
Side Vents
Trim/Molding
Gutter Extensions
60393
VENTLINE
CEILING
EXHAUST FAN
Powered ceiling or bath fan,
very efficient for smaller
areas. Consists of the
following parts: • Cap
and roof flange assembly
(sold separately). • Power
unit (motor, fan, and pipe
assembly). Inside grille is 10" dia. Self-closing
foam damper opens and closes. Dynamically
balanced polypropylene blade will not bend out
of shape. 8" dia. rough-in opening required
With a pull strap
for easy removal!
VENTMATE
VENT CUSHION
WITH PULL
STRAP
• Simply push the
3" thick R-4 insulated insert into any
standard 14” roof vent and save energy.
• Prevents heat loss during cold nights.
• Increases A/C efficiency during hot days.
• Pull strap for easy removal. • Inserts easily into
vent. • Great for summer or winter.
• Keeps light out.
61128 7" Fan w/o Cap & Flange, 115V, 50CFM
#V2262-50
1
61121 Fan Blade only for 7" insert fans and
sidewall fans; 3 blade CW; fits .214 dia. round
shaft with knurl; 6 1/2" dia; white
#BVA0312-00 1
CAMCO NEW!
FLYING
INSECT SCREENS
FOR REFRIGERATOR
Wasps, mud dauber, birds and
rodents pose a serious threat
to your RV water heater, furnace and stove. They can
enter through vents and openings and cause serious damage by building nests that
interfere with air flow.
Protect your valuable investment by purchasing
and installing Camco’s Flying Insect Screens.
These easy-to-install screens will help ensure
that your vents stay free from costly invasion
by unwanted pests.
60395
60395 installed
67304 Vent Cushion with Pull Strap
#67304
8
VENTLINE
VANAIR ROOF
BLOWER
HENG’S
INDUSTRIES
THERMAL PANE
ROOF VENT CAP
This vent cap was designed to extend the
camping season for the part time camper and a
must for full timers. The cap is one piece, has no
seams or welds, with an air space between two
layers. This design gives you a thermal break
increasing the r-value and decreasing condensation.The cap stops condensation from forming
on the inside, and running down the fascia into
the attic, and rotting the roof! This could save
staining on the Luan board, or possibly save the
cost of replacing a whole roof! Stops molding
and therefore helps with health issues.It also
keeps the heat in/out and the A/C in/out.
The benefit to the customer is savings on the
heat bill, and having the recreational vehicle
looking new longer.
68648 Thermal Pane Roof Vent Cap
#90110-C1DL
24
#BVAO502-03
NEW!
1
45063
45064
JR PRODUCTS
REFRIGERATOR VENT LATCHES
CAMCO
RV DUAL
VENT
COVER
Twist lock latch most often used in refrigerator
exterior doors but can also be used for many
interior converter doors.
Block sun and
prevent interior
fading, while
enjoying great air circulation. Easy to install: holding
clips fit existing screw
holes.
45063 For Thin Panel Walls (up to .057”),
Pk/2 #00235
24
45064 For Thick Panel Walls (up to .162”),
Pk/2 #00245
24
6
RV DESIGNER
LATCHES
Insulated vent cover reduces heat loss in winter and
reflects sunlight and heat in summer. Easy installation and
removal with hook & loop fasteners (included). Attaches to
vent frame or ceiling for a quick peel-and-stick installation.
= Std. Carton Qty.
60393 RS500 Fits RV Refrigerator Vents
Except Dometic #42148 6
60395 RS600 Fits Dometic RV
Refrigerator Vents #42149 6
65734 Roof Blower #VP-543 12
62321 Replacement cover only
CAMCO REFLECTIVE
VENT QUICK COVER
67467 Quick Cover, 14” x 14” #45191
60393
An efficient blower that
comes with a 12 VDC motor, drawing 1.5 amps. High-impact plastic dome and
body needs only a 6-1/4" opening. Trim ring
telescopes to adjust to roof thickness from 11/2" to 2-1/2". Leak-proof. Interior color is polar
white; comes complete with cane-mesh screen.
Easy 1-hand opening/closing for ease of operation. Blue/grey smoke covered exterior color.
60096 Vent Cover, White #45651
6
60395
4
REFRIGERATOR/
CONVERTER VENT LATCH
Latch commonly used on exterior access
door for fridge vent, inverter door, etc.
43977 Fridge/Converter Vent Latch
#E377
12
209
H
REFRIGERATOR VENTS
VENTS & TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
62765
61750
Norcold
65532
VENTS FOR
NORCOLD REFRIGERATORS
Dometic
New Style
65532
ROOF VENT
65528
Low profile plastic roof vent for use with all models.
Complete set includes cap and base (order
separately). Installation cutouts 5-1/4" H x 24".
65532 Vent Cap Only, Polar White
#65532
65309
1
65309 Base Only #616319BWH
12
SIDE VENTS
65529
Plastic Side Vent. 13-3/4" H x 21-1/2" W
cut-out size; 16-1/2" H x 24-1/4" W overall size:
61750 Polar White #621156PW
Dometic
Old Style
62765 Latch only #617772
61880
12
1
Upper Side Vent For Models 322, 422/3,
452/3, 652/3. 7-1/4" H x 20-7/8" W:
61880 Polar White #617485PW
65598
61889 Polar White #617484PW
VENTMATE
REFRIGERATOR VENT
LIDS
1
Lower Side Vent For Models 322, 422/3,
452/3, 652/3. 9-9/16" H x 19-1/8" W:
61889
1
VENTLINE METAL
REFRIGERATOR ROOF VENTS
61124
CUTOUT: 5" X 18"
Made of high impact plastic. UV stabilized.
65528, 65529, 65597 and 65598 are direct
replacement lids for Dometic refrigerator vents.
65532 is a direct replacement lid for Norcold
refrigerator vents.
White prefinished metal, streamlined design cover.
With bug screen. Order cap and base separately.
61124 Vent Cap, overall size , 101/2" x 18 11/16 " x
61131
Refrigerator Vent Lid, Polar White, Fits:
65532 Norcold #65532 1
65528 Dometic N/S #65528
65529 Dometic O/S #65529
20
71/2" x 20 13/32 " #V0504-00
10
Cap
1
20
CUTOUT: 5" X 20"
65690 Vent Cap, overall size, 119/16" x 20 3/4 " x 3",
White #V0432-03
20
61958 Base with screen, overall size
Refrigerator Vent Lid, Colonial White, Fits:
65597 Dometic N/S #65597
65598 Dometic O/S #65598
215/16", White #V0157-03
61131 Base with screen, overall size
71/2" x 22 13/32 " #V0565-00
1
20
CUTOUT: 5" X 24"
1
65689 Vent Cap, overall size, 111/2" x 24 3/4 " x 3",
White #V0203-03
Base
20
61132 Base with screen, overall size
71/2" x 26 13/32 " #V0523-00
JR PRODUCTS
HORSESHOE
VENT
Made of durable long lasting plastic that won’t
fade or discolour. Perfect for replacing existing
vents or to install a side vent.
67303 Horseshoe Vent, Polar White
#298-01-A-PW-A
210
20
JR PRODUCTS HATCH INSTALLATION KIT
Installation kit with everything you need to replace
or install a hatch. Includes premium butyl tape and
screws for a proper seal.
Hatch Installation Kit:
65439 Small (25" butyl tape and 12 screws)
#04205
36
65440 Large (36" butyl tape and 10 screws)
#04195
36
1
◆
Not UPS-able;
▲
Hazmat terms apply; LS Limited Supply
PLUMBING VENTS • REGISTERS
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
H
VENTS & TRIM
Side Vents
Trim/Molding
Gutter Extensions
65735
CAMCO
FLYING
INSECT
SCREENS
NEW!
62334
FOR PLUMBING VENT
Wasps, mud dauber,
birds and rodents pose a
serious threat to your RV
water heater, furnace
and stove. They can
enter through vents
and openings and cause
serious damage by building nests that interfere with air
flow. Protect your valuable investment by purchasing and instal-ling Camco’s Flying Insect
Screens. These easy-to-install screens will
help ensure that your vents stay free from
costly invasion by unwanted pests.
60388 RV Plumbing Vent #42152
ULTRA-FAB
PRODUCTS
MINI SOLAR
PLUMBING VENT
VENTLINE
PLUMBING VENTS
• Automatically removes RV plumbing odors
and moisture. • Silent and reliable ventilation.
• Aerodynamic for less drag co-efficiency.
• Durable powder coated finish. • Installs easily
on roof top. • No wiring required. • Universal
design replaces most RV plumbing caps.
• Solar powered start and stop. • 3-yr. warranty.
65735 Plumbing Vent w/Cap #V2084
Plumbing Vent:
60026 Colonial White #V2049-03
62334 White #V2049-01 100
#53-945001
Use the power of the wind to draw holding tank
odors out of your RV. Even a gentle breeze works
with the dynamically engineered shape of the
Cyclone™ to create a powerful vortex that pulls
odors up and away. Attaches easily to any RV
plumbing vent. Patent Pending.
100
20
67231
6
CAMCO CYCLONE PLUMBING VENT
1
PLASTIC: Plastic vent fits pipes 1 1⁄2 ".
69847 Mini Solar Plumbing Vent
SUNFORCE
SOLAR VENT
WITH LIGHT
69253 Sewer Vent Cover #40595
GALVANIZED STEEL: Made of galvanized steel
for 11/2" pipe. Removable cap.
Powered by
sunlight.
Easy installation, no wires
required. Silent
secure ventilation.
No running costs. Helps reduce humidity.
Can be mounted in polycarbonate, glass, wood,
metal and more. Dim.: 9.5" L x 9.5" W x 3.5" H
(24 x 24 x 8.89 cm).
14843 Solar Stainless Steel Vent
#81300
CAMCO REPLACE-ALL
PLUMBING VENT
CAP ONLY
Separate cap fits up to a
67232
2" pipe. Features spring
tension attachment, which eliminates
the need to replace the entire vent
just because of a lost cap top. Patented.
Replace-All Plumbing Vent Cap Only:
67232 Beige #40134 6
67231 Polar White #40034
6
6
65593
65591
5" METAL PLUMBING VENT
Vent pipe is 5 1/16" i.d. for
5" nominal duct size.
Stands 4 1⁄8 " above
flange. For flat roof.
3
68666
61125 5" Metal Vent #V2005-00
JR PRODUCTS
ACCESS/DECK PLATE
Used by many RV Manufacturers for cord and
fresh water access to your RV compartments.
They are constructed of durable ABS for long
life and will replace most units used in today's
markets. Easily installed anywhere easy
access is needed.
Access/Deck Plate, Packaged:
4” Black #31015 16
4” Polar White #31005 16
5” Black #31035 16
5” Polar White #31025 16
45228
45227
45230
45229
6
= Std. Carton Qty.
26
HENG’S
PLUMBING VENT
Made of tough exterior
plastic with a weather
resistant finish. They feature a unique cap which
can be locked on or removed with a twist of the
wrist without the need of tools. These vents are
made to fit pipes up to 2” in diameter with a
2-1/2” projection above the roof.
Plumbing Vent:
61404 Colonial White #10002-C
69642 Polar White #10001-C 25
25
BRD
ROTAIRE REGISTER
Rotaire register is molded from durable ABS
plastic in a variety of colors. The damper mechanism can be easily opened and closed and may
be completely removed for full flow. Grill rotates
a full 360° to direct air flow where desired. 4" dia.
mounting collar; overall 5" dia. by 2-1/4" D.
Rotaire Register:
Beige, 4" #16511
65591
65593
65592
65596
68666
1
Black, 4" #16611
60
Walnut, 4" #16411
White, 4" #16711
1
1
White Provent, 5” (fits 4”
opening) #16812 50
211
H
REGISTERS • GRILLES • SIDE VENTS
VENTS & TRIM
In Section H:
Roof Ventilation
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
RV DESIGNER
FLOOR REGISTER
WITH DAMPER
D & W INC. PRODUCTS
SPACEPORT OUTLET
VENT FOR DUCTED
A/C SYSTEMS
Designed as an upgrade
replacement of the popular Aireport vents
used in the ceilings of
most RVs. The Spaceport both opens and
closes, and rotates for
the ultimate in comfort
control. Easy to install; just
remove screws of old vent and replace with the
Spaceport. 6-7⁄16" overall dia.; 4-5⁄8" hole size.
61452 Outlet Vent #8840WH
Gutter Extensions
1
AP PRODUCTS FLOOR REGISTER
Sturdy metal construction with extra-deep
flange. Easy, fast installation. Narrow spaced
fins and wide flange are important home owner
features. Adjustable. 1" Deep.
NOTE: size shown is the hole size.
4" Wide Register (5-1/4” Outside), Brown:
• OD 12” x 3-1/2”, Cut-out 10” x 2-3/8” x 1”.
• Clamshell of 15” W x 7” H x 2” D. • Plastic.
Floor Register with damper, Plastic:
69297 White #H850 12
69298 Tan #H860 12
68646 8" L #013-626 48
68641 10" L #013-628 48
68644 12" L #013-630 48
JR PRODUCTS
PLASTIC REGISTER
4" Wide Register (5-1/4” Outside), White:
AIREPORT GRILLE
A louvered version of the
Aireport Diffuser lets
you direct the air
exactly where you wish.
Easily installed and efficient in operation. All Aireports are interchangeable after installation.
7" overall dia; 4-1⁄4" hole size. White.
61451 Aireport Grille #6840WH
1
AIREPORT DIFFUSER
The adjustable
Aireport Diffuser
for ducted air
conditioners offers 360° air maximum comfort
and efficiency, plus a unique design feature that
eliminates condensation. Partially closeable.
6.5" overall dia; 4-1⁄4" hole size. White.
61449 Diffuser #5840WH
1
68647 8" L #013-625 48
68643 10" L #013-627 24
68645 12" L #013-629 24
61604-5
61198-9
METALINE
FLOOR
REGISTERS
AND RETURN AIR FLOOR GRILLES
Durable brown finish. Easy to open and close.
Dampered Register:
62353 Polar White #288-86-AB-PW-A
78843 Tan #288-86-AB-TN-A 2
HENG’S
EXHAUST
SYSTEM
• Replaces air ventilation
registers. • Requires a
5-1/4” opening and 4 mounting screws.
• Direct OEM replacement. • Won’t fade, discolor, rust, or peel. • UL 94 C-O & approved for
use w/Dometic air conditioners. • Dimensions:
Cut Out Dim. 5" and Outside Dim. 6-1/2".
27806 Polar White, Undampered, packaged
#GRILL2-A
20
27808 Polar White, Dampered, packaged
#GRILL2D-A
212
20
12
Return Air Grille without Dampers:
61199 53/8" x 9 1/4" Return,
EXTERIOR
VENTS FOR
VENTLINE
DUCTED
RANGE
HOODS
12
For 4" x 10" Opening #10F2511R
N
12
Double Shutter Register:
For 4" x 8" Opening #10F2509
JR PRODUCTS
CEILING VENTS
Undampered Register:
62350 Polar Wht #288-86-A-PW-A
78842 Tan #288-86-A-TN-A 2
61605 4" x 8" #12509 48
61604 4" x 10" #12511 48
61198 53/8" x 113/4" Return,
EW!
These registers meet
and exceed
H.U.D. and
R.V.I.A. specifications. They are
made of molded thermoplastic and will not rust. Corners are rounded so
there are no sharp edges. Easy to install, easy
to open and close. The color is solid throughout
the register, so it cannot scratch or peel away.
Overall size 12" x 4 1⁄4 "; cutout size 10" x 2 3⁄8 ".
48
62810
This unit consists
of an attractive exterior vent
cover designed to keep rain and dust out
of your vehicle with an outside manual
release damper. Once the outside manual
release damper is unsecured, the damper automatically opens when the range hood fan is
activated to allow cooking odors and smoke to
be exhausted. The damper automatically closes
to prohibit insects and dust from entering when
the range hood is not in operation. The manual
release damper must be secured before travelling. Dim.:4.62 x10.88". Cutout: 4" x 10.86".
Weatherproof Outside Vent features a lockable
damper, heavy styrene construction and a 1-3/4"
inlet flange. Rough opening is 3-3/4" x 10-1/2".
Overall size 11-5/8" x 5-9/32".
Horizontal Outside Vent:
64357 Colonial White #V2111-11
61898 Polar White #V2111-13 24
Louvered design.
1-3/4" inlet size;
cutout: 10-1/2" x
3-3/4"; overall:
12-1/8" x 5-1/4".
Constructed of durable injection molded plastic.
Durable Standard Vent Cover with Damper:
Vent, Outside Louver:
66289 Bright White #J116AWH-C
62810 Almond #J116AOW-C 60
61126 Colonial White #V2018-02
66630 Polar White #V2018-01 70
60
◆
24
Not UPS-able;
▲
70
Hazmat terms apply; LS Limited Supply
SIDE VENT • INSERT TRIMS • GUTTER EXTENSIONS
Roof Ventilation
In Section H:
Refrigerator Vents
Plumbing Vents
Registers & Grilles
H
VENTS & TRIM
Side Vents
Trim/Molding
Gutter Extensions
BRD
FLEXIBLE DUCT
65683
4" x 25' flex hose;
clamps not included.
65594 Flex Duct, 4" x 25' #16815
VENTLINE SIDEWALL
EXHAUST VENT
61111
Graceful styling covers total efficiency and performance, all moving parts are weather protected. Fan starts when outside cover opens,
stops when closed. Fits 2" -3" wall thickness.
Outside door insulated. 110-V. Cut-out size:
9.5" x 9.5", U.L. Listed; CSA approved.
Complete unit consists of vent/fan plus grille.
65683 Complete Sidewall Vent/Fan with Grille,
White Cover #V2215-21
1
REPLACEMENT PARTS
61121 Fan Blade for 7" insert fans and sidewall
fans; 3 blade CW; fits .214 dia. round shaft with
knurl; 6 1/2 dia; white #BVA0312-00 1
61111 Plastic Momentary Switch
#BV0140-03 1
Philips
Style
SCREW
COVERS
6
Elixir
Style
HEHR
Style
Give your louver-type doors and windows
a smooth, finished look with these plastic
screw covers. Dealer packs of 10 only.
Elixir Style, Pk/10 Screw Covers, 8' L:
48308 Black #011-355-10 1
45413 Colonial White #011-354-10 1
45416 Polar White #011-357-10 1
Hehr Style, Pk/10 Screw Covers, 8' L:
45412 Colonial White #011-362-10 1
45415 Polar White #011-365-10 1
Philips Style, Pk/10 Screw Covers, 8' L:
45411 Colonial White #011-358-10 1
45414 Polar White #011-361-10 1
PREMIUM
VINYL
INSERT
Our premium
vinyl insert is
preformed to
fit more securely into your screw cover trim.
Made of the same thick vinyl used by many of
the original manufacturers, this insert is perfect for replacing worn, damaged, or weathered trim. An inexpensive way to spruce up the
exterior of your RV and simple to install.
Flat interior is 3/4” wide; overall width is 1”.
RV DESIGNER INSERT TRIM
Narrow Insert Trim - a few RV manufacturers
use this narrow channel.
3/4" wide x 25’ roll,, Narrow:
46105 Colonial White #E331
48093 White #E330 1
1
Standard Insert Trim - This is the standard,
1" trim used by most RV manufacturers.
Cut with scissors. Easy to install.
JR Products Premium Vinyl Insert,
25 ft. Roll, Blister Pack:
46923 Black #10015 18
46922 Brown #10055 18
46924 Colonial White #10035 18
46925 Designer Beige #10045 18
48799 White #10025 18
JR Products Premium Vinyl Insert,
50ft. Roll, Shrink Wrapped:
47825 Black #10061 1
47829 Back by popular demand!
Brown #10101 1
47827 Colonial White #10081 1
47828 Back by popular demand!
Designer Beige #10091 1
47826 White #10071 1
JR Products Premium Vinyl Insert,
100ft. Roll, Shrink Wrapped:
45073 Black #10111 12
48656 NEW! Brown #10151 12
45075 Colonial White #10131 12
48655 NEW! Designer Beige
#10141
12
45074 White #10121 12
AP Products Vinyl Insert, 1000 ft. Roll:
45501 Black #011-312 1
45503 Colonial White #011-313 1
45502 White #011-311 1
1" wide x 25’ roll, Standard:
Beige #E325 1
Black #E329 1
Brown #E327 1
Colonial White #E323
White #E321 1
46102
46104
46103
46101
46100
1
Heavy Duty Insert Trim - Thicker material lasts
longer than standard trim. Longer wings grip the
track better. Fits standard 1" molding.
1" wide x 25’ Roll, Heavy Duty:
46967 Black #E369 1
46964 Colonial White #E363
46963 White #E361 1
60
1" wide x 100’ Roll, Heavy Duty:
47563 Black #E469 12
47560 Colonial White #E463
47559 White #E461 12
12
FLAT INSERT TRIM
Flat insert trim. (Sold only in tube of 10 pieces, 20 ft. long.) Uses vinyl insert.
Flat Insert Trim. (Sold only in tube of 10 pieces, 20 ft. long):
49944 Arctic White #CDS-49944 ◆ 1
41137 Colonial White #CDS-41137 ◆ 1
41121 Mill Finish #CDS-41121 ◆ 1
CAMCO GUTTER EXTENSIONS
End Caps, Bag/10:
End Caps
49946 Arctic White #CDS-49946 1
41135 Colonial White #CDS-41135
41134 Mill Finish #CDS-41134 1
Insert
Trrim
1
Helps prevent black streaks from forming by
directing rain water runoff away from the sides of
your RV. Extenders clip onto your RV gutters.
48315 Gutter Extensions, Pk/4
#42123
6
= Std. Carton Qty.
4
213
H
VENTS & TRIM
In Section H:
Roof Ventilation
MOLDINGS • DRIP RAILS • GUTTER EXTENSIONS
Refrigerator Vents
Plumbing Vents
Registers & Grilles
Side Vents
Trim/Molding
Gutter Extensions
Long Lip
DRIP CAP
46849
Mill-finish aluminum drip caps divert rain and
melting snow from doors and windows. Used to
protect door and window openings of all types
including mobile homes, RVs, horse trailers,
portable toilet enclosures, etc. With formed ends
and punched screw holes. Note: Measure
lengths from inside the curve, as illustrated.
The overall length equals Dimension “A” + 3.5".
61250
61247
61415
61416
60526
60527
60528
60640
60529
60641
60530
61248
60531
61249
60532
60533
61419
60534
60642
61420
61251
60643
9" L Drip Cap #300900 5
14" L Drip Cap #301400 5
16" L Drip Cap #301600 5
18" L Drip Cap #301800 5
19" L Drip Cap #301900 5
21" L Drip Cap #302100 5
24" L Drip Cap #302400 25
27" L Drip Cap #302700 25
30" L Drip Cap #303000 25
32" L Drip Cap #303200 25
34" L Drip Cap #303400 25
36" L Drip Cap #303600 25
40" L Drip Cap #304000 25
42" L Drip Cap #304200 5
44" L Drip Cap #304400 1
46" L Drip Cap #304600 5
49 1/2" L Drip Cap #304912 1
52 1/2" L Drip Cap #305212 1
56" L Drip Cap #305600 1
59 1/2" L Drip Cap #305912 1
64 1/2" L Drip Cap #306412 1
73 1/2" L Drip Cap #307312 1
46851
Short Lip
End Caps
CORNER
MOLDING
(Sold only
in tube of
10 pieces.)
46850
LONG LIP CORNER MOLDING
Corner Insert Trim
(Sold only in tube of 10 pieces, 20 ft. long):
49943 Arctic White #CDS-49943 ◆ 1
41122 Colonial White
#CDS-41122 ◆ 1
41119 Mill Finish #CDS-41119 ◆ 1
EDGE MOLDING,
DRILLED &
COUNTERSUNK
FOR #8 SCREWS
Edge Molding, DC #8, Arctic White, Tube/10:
46849 8' #CDS-46849
SHORT LIP CORNER MOLDING
Standard side insert extruded trim.
(Sold only in tube of 10 pieces, 16 ft. long):
49942 Arctic White #CDS-49942 ◆ 1
41625 Colonial White
#CDS-41625 ◆ 1
41624 Mill Finish #CDS-41624 ◆ 1
46850 12' #CDS-46850 ◆ 1
EDGE
MOLDING
END CAPS FOR ALL CORNER MOLDING
Ends Caps, Bag/10:
49946 Arctic White #CDS-49946 1
41135 Colonial White #CDS-41135
41134 Mill Finish #CDS-41134 1
1
46851 10' #CDS-46851 ◆ 1
Standard edge
molding.
Sold only in
tube of
10 pieces,
16 ft. long.
1
41636 Tube/10 Edge Molding, Mill
Finish #CDS-41636 ◆
1
DRIP RAIL
Standard drip rail.
(Sold only in tube of
10 pieces, 16 ft. long.)
40202 Tube/10 Drip Rail, Arctic
White #CDS-40202 ◆
1
DRIP RAIL
(Sold only in tube of
10 pieces, 16 ft. long.)
Insert Drip Rail, Tube/10, 16ft. L:
45051 Tube/10 Insert Drip Rail, Arctic White
#CDS-45051 ◆ 1
214
JR PRODUCTS
RV GUTTER SPOUT
JR PRODUCTS
EXTENDED
RAIN GUTTER SPOUTS
These one-piece extended rain gutter spouts are
the longest on the market and will keep your
RV free of black streaks by directing the water
away from the sidewalls. The eye pleasing
design moves the water volume faster and
further away than any other rain gutters spouts.
Made of durable plastic with UV inhibitors for
years of use. Spouts have a one-piece design
so you don't have to use clip-ons. They attach to
your RV under the existing aluminum track and
never need to be removed.
Extended Rain Gutter Spouts:
28439 Rigid, Pk/2 #655-PW-A
28442 Flexible, Pk/2
#655-FLEX-PW-A
Gutter spouts easily install to sidewall rain
channel ends to eliminate dirty streaks from the
side of your RV unit. Fits all manufacturers’ rain
channels including awning inserts, J-channels.
Drip Spout, Bag/4:
1
49500 Colonial White #389CW-A
49781 Polar White #389PW-A
28
◆
Not UPS-able;
▲
1
1
Hazmat terms apply; LS Limited Supply
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising