Fiche signalétique indicateur GSE350

Fiche signalétique indicateur GSE350
T E C H N I C A L S P E C I F I C AT I O N
Model 350 I.S. and Model 355 I.S.
Intrinsically Safe Indicators
355 I.S.
350 I.S.
SPECIFICATIONS
ELECTRICAL
Power Requirement: Input (J14): 5.1 VDC – 12 VDC
Excitation Voltage: 5 VDC
Excitation Current: 57 mA max (5V EXC)
(4) 350 Ohm weight sensors
Signal Input Sensitivity: 0.1 mV/V min – 10mV/V max
Signal Connection: 4 or 6 lead with sense leads
PERFORMANCE
Full Scale (F.S.): Selectable 0 to 999,990
A/D Conversion : 60 Hz
Resolution: 20 bit A/D converter, 100,000d displayed,
1,000,000 internal
Zero Track Aperture: Off – 10d
Zero Range: Selectable, 0.01-100% Full Scale
Non–Linearity: 0.005% Full Scale, Load Cell dependent
Operating Temperature: -10° C to +40° C
Units of Measure: lb, kg, grams, lb-oz, oz
KEYPAD
Model 350 IS: Durable elastomeric rubber,
5 key (Zero, Print, Units, Tare, Select)
Model 355 IS: Durable elastomeric rubber, 22 key
(On/Target, Off, Zero, Tare, Print, Select, STOP, START,
Select, Units, Sample/Enter, Clear and Full Numeric)
DISPLAY
LED: 6 digit weight display, 0.8” (22mm) height
12 LED annunciators for operational status
LCD: 6 digit weight display, 1” (25mm) height
12 LCD annunciators for operational status
Includes LCD checkweigh / sort bar
with or without backlight
COMMUNICATIONS
Comm 1: RS232 with Hardware Handshaking (CTS/RTS)
Comm 2: TTL Port for optional Fiber Optic Module
PROCESS CONTROL
Remote Input: 2 momentary contact programmable
to perform TARE, PRINT, ZERO
SPECIFICATIONS CONTINUE ON NEXT PAGE
Model 350 I.S. and Model 355 I.S. Intrinsically Safe Indicators
T E C H N I C A L S P E C I F I C AT I O N
SPECIFICATIONS CONTINUED FROM PREVIOUS PAGE
ENCLOSURE
Stainless Steel: NEMA 4X, IP6X
Mounting: 2 Swivel brackets are available for battery or
AC operation
Shipping Weight: 7 lb. (indicator only)
APPROVALS
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Factory Mutual
ATEX
OIML R76/1992-GB1-09.05
EC UK2855
NTEP COC 98-092
Canadian WM AM 5257
Canadian WM AM 5518
CE
OPTIONS
SAFE AREA OPTIONS
Battery Charger: Charges completely discharged
battery option in approximately 3.5 hours. Universal
AC input 85-265 VAC, 50/60 Hz
HAZARDOUS AREA OPTIONS
Battery: Stainless steel enclosure, mounts to indicator
swivel bracket. 200 hours continuous use with LCD
display and one load cell. 100 hours continuous use
with LED display and one load cell.
AC/DC Power Supply: Stainless steel enclosure. Powers
up to 2 indicators (2 indicators can only be powered
in Groups C-G hazardous area) Wall mount. Universal
AC input 90-250VAC, 50/60 Hz.
Power Extension Cable: Allows the AC/DC power
supply to be mounted away from the indicator 25
feet or 50 feet lengths available.
Model 350 I.S. and Model 355 I.S. Intrinsically Safe Indicators
T E C H N I C A L S P E C I F I C AT I O N
DIMENSIONS
350 I.S.
350 I.S.
with battery option
DIMENSIONS CONTINUE ON NEXT PAGE
Model 350 I.S. and Model 355 I.S. Intrinsically Safe Indicators
T E C H N I C A L S P E C I F I C AT I O N
DIMENSIONS CONTINUED FROM PREVIOUS PAGE
355 I.S.
355 I.S.
with battery option
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2014 Illinois Tool Works. All rights reserved.
This publication is issued to provide outline information only and may not be regarded as a representation relating to the products or services concerned.
This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves the right to alter without notice the specification, design,
price or conditions of supply of any product or service at any time.
3/2014 350IS_spec_500348.indd
AWT35-500374
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising