MIDS-LVT(1) Mobile System Datasheet

MIDS-LVT(1) Mobile System Datasheet
MIDS-LVT(1) Mobile System
MIDS Support Equipment
RUGGED, TRANSPORTABLE, READY-TO-USE
Stowage Drawer
(Suitable for
PC Laptop or Cables)
Wheels Stow in Cover
Front View
Rear View
The MIDS-LVT(1) Mobile System is a transportable, ruggedized case unit
for the MIDS-LVT(1) terminal and its variants. Outfitted with all of the
support equipment required to fully operate a MIDS-LVT(1) Terminal,
this mobile system offers a convenient way to transport and integrate
your Link 16 system. This full-complement system for the MIDS-LVT(1)
alleviates all of the hardware challenges normally associated with
getting your MIDS-LVT(1) Terminal integrated with your Link 16 host
and operational in the network. The system can be used in any number
of venues including operational, training, demonstrations and testing.
This mobile system features support functions including differential DC
power that is switched through the Integrated Control Unit (ICU),
45 CFM forced air cooling, terminal control, associated system cabling,
RF Attenuator and RF Terminator.
The Host interfaces that are supported through the Integrated Control
Unit (ICU) are MIL-STD-1553B (dual redundant channels), 10BaseT
Ethernet and 10BaseT Support Port. The ICU provides RPS input DC
Voltage control and indicator, Terminal ON-OFF-STANDBY state
control, four-bit FAIL DECODE status display, 10BaseT Ethernet and
Support Port TX/RX data activity indicators, 50 Ohm External Time
Reference (ETR) Terminal input port, Long Term Transmit Inhibit (LTTI)
and CV Zeroize control. The MIDS-LVT(1) Mobile System provides easily
accessible front panel connectors for Ethernet and Support Port
(RJ-45), ETR (isolated BNC) and MIL-STD-1553 (dual BJ-77 trilug twin
ax jack). The ICU has embedded, dual AUIs for the Terminal 10BaseT
data conversion and two NorthHills three-port MIL-STD-1553 stub
couplers. The system employs a master power switch for improved
safety and centralized AC power control.
Transporting the system is easy, thanks to five-inch wheels that can be
removed and stored in one of the two case covers for shipment.
The system is completely self-contained and only needs 115V 60 Hz,
15 amp single phase power to operate. A 230V 50 Hz version is
available upon request. Count on the MIDS-LVT(1) Mobile System to
quickly and easily bring Link 16 networking, training, and testing to
a variety of venues.
FEATURES
»» Master Power On/Off Switch provides power to all
components.
»» Integrated Control Unit provides RPS Power On/Off
switch and standard terminal controls.
»» Integrated Cooling Tray provides 45 CFM of air to the
Main Terminal and the RPS.
»» Two integrated power supplies provide ± 140 V DC input
to the MIDS Remote Power Supply (RPS).
»» Includes a latchable 2U stowage drawer for cables or
PC laptop.
»» 30 dBm 150 watt RF Attenuator is embedded in the
drawer and connects to Antenna A.
»» Includes all required cables and an RF Terminator
for the unused antenna.
»» Five-inch wheels allow easy movement of the unit.
Wheels are removable and can be stowed in
one of the case covers for shipment.
»» MIDS-LVT(1) Voice Control Unit
with headset or microphone
can be included (optional).
»» Terminal and RPS sold separately.
OR
SPECIFICATIONS
»» Input Power 115V AC 60 Hz, 15 amp
»» Dimensions (with covers) 27 x 28 x 39 in
»» Dimensions (without covers) 27 x 28 x 28 in
Weight with MIDS Terminal
and RPS 227 lb
ORDERING INFORMATION MIDS-LVT(1) Mobile System
Type
ViaSat PN
MIDS-LVT(1) Mobile System without Voice
1076447
MIDS-LVT(1) Mobile System with Voice (mic)
1077892
MIDS-LVT(1) Mobile System with Voice (headset) 1112945
CONTACT
VIASAT, INC., 6155 EL CAMINO REAL, CARLSBAD, CA 92009
US SALES TEL 760.795.6334 EMAIL MIDS.US@VIASAT.COM
TECHNICAL SUPPORT
TEL 866.MIDSLVT FAX 760.795.1045
INTERNATIONAL SALES
TEL +1.760.476.2675
EMAIL MIDS.INTERNATIONAL@VIASAT.COM
EMAIL MIDS@VIASAT.COM
WEB WWW.VIASAT.COM/MIDS
Copyright © 2009-2011 ViaSat, Inc. All rights reserved. ViaSat and the ViaSat logo are registered trademarks of ViaSat, Inc. All other trademarks mentioned are the sole property of their respective companies. Specifications and product
availability are subject to change without notice. 110802-009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising