LPX200 datasheet

LPX200 datasheet
POWER
LPX200 Enclosure
Installation Notes LPX200 • Cover Enclosure Kit
LPX200 will fit the LPX20X-M and LPS36X-M power supplies.
Materials
ƒƒ 1 Base
ƒƒ 1 Cover
ƒƒ 4 M3x6mm Pan head screws with
spring washer
ƒƒ 4 M3x6mm countersunk screws
ƒƒ 1 M4 nut
ƒƒ 1 M4 star washer
ƒƒ 1 M4 spring washer
ƒƒ 1 Plastic insulator sheet
OUTPUT CONNECTOR
INPUT CONNECTOR
INSULATOR
GROUND STUD
(4X)STANDOFF
Installation Instructions and Notes
1
Place the insulator over the chassis as shown.
2
Place the power supply over the insulator as shown.
3
Align the power supply to the chassis standoff.
4
Secure 4 pan head screws with washer provided with in kit as shown.
5
Place the cover over the power supply as shown.
6
Align the cover to the U-bracket countersink holes.
7
Secure 4 countersink screws provided with in kit as shown.
8
Overall dimensions: 5.9” (150mm) x 3.85” (98mm) x 1.85” (46.9mm).
9
Base plate has three sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm) plus 2 key
ways. (See keyway detail)
b. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
10
Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and
clearances.
11
Ensure base is firmly connected to supply earth via the earth stud marked
12
When using this enclosure, ensure that relevant safety standards (e.g. EN60950) are
complied with, in respect to creepage and clearance distances, and distances through
insulation.
13
All dimensions are in inches (mm)
LPX200 Data Sheet
Mechanical Drawing
(2X)M3 INSERT
5.9
[150]
2.56
[65]
3.85
[98]
0.98
[25]
1.18
[30]
0.98
[25]
4.33
[110]
(2X)M3 INSERT
1.85
[46.9]
0.59
[15]
0.78
[19.9]
3.54
[90]
1.08
[27.6]
0.36
[9.3]
3.15
[80]
0.35
[9]
3.14
[80]
3.75
[70]
0.55
[14.0]
WORLDWIDE OFFICES
Americas
Europe (UK)
Asia (HK)
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other
names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners.
© 2014 Artesyn Embedded Technologies, Inc.
www.artesyn.com
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
LPX200 Rev. 10.15.14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising