Synthetic Compressor Lubricant

Synthetic Compressor Lubricant
DSL“ - 100
MATERIAL SAFETY DATA SHEET
Print date:
14-Jan-2013
Revision Numb er: 2
Revision date: 14-Jan-2013
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product Name:
DSL“- 100
Article Code:
Synonyms:
Chemical characterisation:
050002
No information available
No data is available on the product itself.
Supplier:
Summit Industrial Products
9010 County Road 2120
Tyler, Texas 75707
Phone: (903) 534-8021
Fax: (903) 581-4376
Emergency telephone number
CHEMTREC: 1-800-424-9300, International: (703) 527-3887
2. COMPOSITION/INFORMATION ON INGREDIENTS
Components
1,2 Benzenedicarboxylic acid di-c9-c11
branched alkyl ester
CAS-No
68515-49-1
ACGIH (TWA mg/m 3 ):
None
OSHA (TWA mg/m 3 ):
None
Note for Non-Hazardous Components Components not precisely identified above are non-hazardous as defined by
applicable laws.
3. HAZARDS IDENTIFICATION
Properties affecting health:
None.
Principle routes of exposure:
None.
Skin contact:
Substance does not generally irritate and is only mildly irritating to the skin.
Eye contact:
Avoid contact with eyes. May cause slight irritation.
Inhalation:
May cause irritation of respiratory tract.
Ingestion:
Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea
4. FIRST AID MEASURES
General advice:
Consult a physician
Skin contact:
Remove and wash contaminated clothing before re-use. Wash off immediately with
soap and plenty of water.
Product nam e: DSL“ - 100
1 of 5
Eye contact:
Flush eye with water for 15 minutes. If symptoms persist, call a physician.
Inhalation:
If breathing is difficult, give oxygen. Consult a physician. Move to fresh air.
Ingestion:
Drink 1 or 2 glasses of water. Do not induce vomiting. Consult a physician if necessary.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
Carbon dioxide (CO2), Dry chemical, Water spray mist or foam
Extinguishing media which must not be used for safety reasons:
No information available.
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires.
Specific hazards:
Unusual hazards:
Specific methods:
Burning produces irritant fumes
No hazards to be especially mentioned
In the event of fire, cool tanks with water spray
Flash point:
Autoignition temperature:
>450 (°F)
780 (°F).
Flammability Limits in Air:
Lower
Upper
No information available
No information available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Contaminated surfaces will be extremely slippery. Wear personal protective equipment.
Environmental precautions:
Should not be released into the environment.
Methods for cleaning up:
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste
container.
7. HANDLING AND STORAGE
Handling
Technical measures/precautions:
Safe handling advice:
Storage
Technical measures/storage conditions:
Incompatible products:
No special technical protective measures required.
Always replace cap after use. Handle in accordance with good
industrial hygiene and safety practice.
Keep containers dry and tightly closed to avoid moisture
absorption and contamination.
No special restrictions on storage with other products
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
Ensure adequate ventilation, especially in confined areas.
Personal Protective Equipment
Respiratory protection:
Hand protection:
Skin and body protection:
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection
and protective suit.
Impervious gloves.
Usual safety precautions while handling the product will provide adequate protection
against this potential effect.
2 of 5
Eye protection:
Hygiene measures:
Safety glasses
Avoid contact with skin, eyes and clothing.. Wash off with soap and water..
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State:
Color:
Specific gravity:
Evaporation rate:
Vapor pressure:
Liquid
Clear
<1.0
Not determined
Not determined
Appearance:
Odor:
Boiling point/range
Vapor density:
Solubility:
Liquid
Mild
>600 (°F)
Not determined
Insoluble.
10. STABILITY AND REACTIVITY
Stability:
Polymerization:
Hazardous decomposition products:
Materials to avoid:
Conditions to avoid:
Stable
Hazardous polymerisation does not occur.
Smoke, Carbon oxides
Strong oxidising agents.
Stable at normal conditions
11. TOXICOLOGICAL INFORMATION
Acute toxicity:
No data available
12. ECOLOGICAL INFORMATION
Mobility:
No information available.
Bioaccumulative potential:
No information available.
Ecotoxicity effects:
No data available.
Aquatic toxicity:
No information available
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused
products:
In accordance with local and national regulations.
Contaminated packaging:
Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT
Proper shipping name:
Not Regulated
TDG (Canada)
Proper shipping name:
Not Regulated
IMO / IMDG
Proper shipping name:
Not Regulated
3 of 5
14. TRANSPORT INFORMATION
ICAO
Proper shipping name:
Not Regulated
Proper shipping name:
Not Regulated
IATA
15. REGULATORY INFORMATION
International Inventories
PICCS: This product complies w ith phil:
TSCA: Listed in TSCA
DSL: All of the components in this product are listed in DSL
ENCS: This product does not comply w ith JPENCS
CHINA: This product complies w ith china:
AICS: All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
KECL: This product complies w ith korea:
EINECS/ELINCS This product complies w ith EINECS/ELINCS
U.S. Regulations:
1,2 Benzenedicarboxylic acid di-c9-c11 branched alkyl ester
California Proposition 65 - Listed.
PARTK: Listed.
ILRTK: Listed.
CTRTK: Listed.
Sara (311, 312) hazard class:
Canada
WHMIS hazard class:
Non-controlled
16. OTHER INFORMATION
NFPA
Health:
1
Flammability: 1
Instability:
0
HMIG
Health:
1
Flammability: 1
Reactivity:
0
NFPA symbol:
Reason for revision:
Prepared by:
Not applicable
Health & Safety
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date
of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates
only to the specific material designated and may not be valid for such material used in combination with any other materials
or in any process, unless specified in the text.
4 of 5
5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising