Philips 13MT143S User manual

Philips 13MT143S User manual
Need help fast?
28
27
30
29
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX.
You’ve selected one of the best-built, bestbacked products available today.We’ll do everything in our power to keep you happy with
your purchase for many years to come.
As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the
most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll
receive all the information and special offers for
which you qualify, plus easy access to accessories from our convenient home shopping
network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome-and
thanks for investing in a MAGNAVOX product.
32
31
PANEL INDEX
Front AV (Audio/Video) Input Connections
ó VOLUME +
CHANNEL
POWER
AUDIO
ó VOLUME +
POWER
CHANNEL
3
2
1
ANTENNA
IN
OUT
OUT
ANTENNA
OUT
VIDEO
AUDIO
VCR, Camcorder,
DVD
Player, etc. with
Audio and
Video Out jacks
CHANNEL
3
Red and White
Audio cables
OUT
IN
L
IN
3
5
VCR,
Camcorder,
DVD
Player, etc.
with
Audio and
Video Out jacks
HOW TO AUTOMATICALLY PROGRAM TV
8
3
3
4
5
6
CH
7
8
9
CH
A/CH
0
CC
VOL
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
POWER
VOL
STATUS
EXIT
2
4
1
Install
Language
Tuner Mode
Auto Program
Channel Edit
MENU
MUTE
SLEEP
2
4
SURF
SMART
PICTURE
SOUND
3
5
Auto Program
Channel
Auto Program
Channel
12
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
Model No. ________________________
Serial No. ________________________
Auto Program
Channel
POWER
ó VOLUME +
POWER
CHANNEL
Remote
Sensors
(point
remote
here)
Connect an accessory device to the
AUDIO/VIDEO IN
jacks.
5
Description of Remote Control Buttons
2
1
4
3
1
A/CH Button
(Alternate Channel)
Press to switch between the last channel
and the present channel.
Details are on panel 26.
2
3
Basic Cable TV Connection
1
1
2
CABLE
IN
TO
TV/VCR
AUDIO IN
DVD-D OUT
IR
R
AUDIO OUT
USB
TV
PASSCARD
SPDIF
IN
VIDEO
OUT
L
S-VIDEO
Y
Pb
Pr
OPTICAL
SPDIF
Jack Panel Back of Cable Box
3
75Ω
75Ω
Round 75Ω
Coaxial Cable
Jack Panel Back of TV
Connect the Cable TV cable
directly to the 75Ω jack on the
TV.
75Ω
GROUND CLAMP
ANTENNA LEAD IN WIRE
(NEC SECTION 810-20)
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Rear of TV
Cable TV Signal
Helpful Hints
If no Video Signal is present, the TV
will shut itself off in about 10 minutes. If the TV is tuned to the AV
channel and there is no Video Signal
present, the screen will remain black.
Helpful Hints
RF Coaxial
Cable 75Ω
GROUNDING CONDUCTORS
Description of Remote Control Buttons (Cont’d)
6
1
POWER
2
3
POWER
4
5
6
CH
4
5
6
CH
7
8
9
CH
7
8
9
CH
A/CH
0
CC
VOL
A/CH
0
CC
VOL
VOL
STATUS
VOL
STATUS
EXIT
STATUS/EXIT Button
Press to see the current channel number.
Press to remove a menu.
Remote sensor on
remote control
Helpful Hints
The current channel number will
appear briefly when you first turn on
the TV or when you change channels.
Press STATUS/EXIT to see the current channel number.
1
2
3
4
5
6
13
14
HELPFUL HINT
When CABLE is selected, channels
1-125 are available.
When ANTENNA is selected,
channels 2-69 are available.
When AUTO is selected, the TV
will automatically set itself to the
correct mode based on the type of
signal it detects when the AUTO
PROGRAM feature is activated.
Round Cable 75Ω
Cable TV signal into your home is a
Itofsingle
cable (75 ohm) the connection
the TV is easy.
Example of Antenna Grounding
as per NEC - National Electric Code
ANTENNA DISCHARGE UNIT
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
EXIT
MENU
MENU
POW
CH+
8
7
CH–
9
+
VOL
CC
–
VOL
0
A/CH
TUS
STA
MUTE
SLEEP
SURF
SLEEP Button
Press to set the TV to turn itself off within a certain time. Details are on panel 22.
ER
6
5
CC Button
Press to activate Closed Captioning.
Details are on panel 21.
U
MEN
SURF
SMART
PICTURE
MUTE
SLEEP
SOUND
SMART
PICTURE
SOUND
7
8
9
E
MUT
EP
SLE
SMART
SUR
SOUN
F
PICT
SmartSurf
If your TV model has SmartSurf, press this
button to move through the channels you
have set. Details are on panel 25.
D
URE
Battery Installation
Use Auto Program as described on
panel 9 to set up channels that are
available in your area. Use the CH +/–
buttons to scan available channels.
If no Video Signal is present, the TV
will shut itself off in about 10 minutes.
If the TV is tuned to the AV channel
and there is no Video Signal present,
the screen will remain black.
75Ω
How to Use the Language Control
7
or our Spanish speaking TV owners
an on-screen LANGUAGE option is
present. With the LANGUAGE control
you can set the TV’s on-screen menu to
be shown in either English or Spanish.
Press the MENU button on
the remote to show the onscreen menu.
Press the CURSOR UP 8
or DOWN
buttons to
scroll through the on-screen
menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT
button to display the
INSTALL menu features.
Press CURSOR UP 8 or
DOWN
buttons to scroll
the Install features until the
word LANGUAGE is highlighted.
Press the CURSOR RIGHT
button repeatedly to
select ENGLISH or
ESPAÑOL (Spanish).
When finished, press the
STATUS /EXIT button to
remove the menu from the
TV’s screen.
CH(annel) +/– Buttons
Press to scan memorized channels.
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
MENU Button
Press to see the menu. Press
repeatedly to return to previous
menus or remove the menus.
Arrow 2 3 5 Buttons
Press to select or adjust items in
the menu.
MUTE Button
Press to eliminate or restore the TV
sound. MUTE will appear on the TV
when the sound is muted.
SMART SOUND Button
Press to choose a sound setting.
Details are on panel 24.
1
2
3
4
5
MAGNAVOX
NOTE:
For model 13MT1533
Audio sound is only
available via the
headphone
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP 8 or
DOWN buttons to scroll
through the on-screen menu until the
word INSTALL is highlighted.
Press the CURSOR RIGHT 3
button to display the INSTALL menu
features.
Press the CURSOR UP 8 or
DOWN buttons to scroll the
Install features until the words
CHANNEL EDIT are highlighted.
11 HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
Press the CURSOR RIGHT 3
button to display the CHANNEL
EDIT options.
With the CHANNEL EDIT
options displayed, and CHANNEL
NO. highlighted; you can use the cursor buttons to scroll through all available channels that you wish to add
(Skipped OFF), or delete (Skipped
ON) from the TV’s memory. You can
also use the NUMBERED buttons
to go directly to a specific numbered channel that you wish to
add or skip. Or, you can also use the
CH + or CH - to quickly scan the
channels that have not been skipped.
9
2
4
2
4
7
1
2
3
4
5
6
POWER
CH
7
8
9
CH
A/CH
0
CC
VOL
VOL
STATUS
EXIT
MENU
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
6
8
Install
Language
Tuner Mode
Auto Program
Channel Edit
Channel No.
Skipped
1
SURF
SMART
PICTURE
SOUND
3
5
8
Channel Edit
Channel No.
Skipped
12
MAGNAVOX
Channel Edit
Channel No.
Skipped
Channel Edit
Channel No.
Skipped
On
Brightness: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
until the darkest parts of the picture
are as bright as you prefer.
2
3
Color: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
to add or eliminate color.
4
5
6
Sharpness: Press the CURSOR
RIGHT 3 or LEFT 2 buttons to
improve detail in the picture.
Off
7
Using the CURSOR DOWN
button, scroll the menu to highlight
the word SKIPPED.
Now use the CURSOR RIGHT 3
button to toggle between ON or
OFF.
If ON is selected the channel is
skipped when scrolling channels
with the CH + or – buttons. If
OFF is selected the channel is not
skipped when scrolling channels
with the CH + or – buttons.
1
HELPFUL HINT
An “X” appearing in front of any channel
will indicate that channel has skip on. When
the CH + or CH - buttons are used, those
channels will be skipped.
In order to get to the external input channel AV, you must use the CURSOR Right 3
or CURSOR LEFT 2 buttons.
Tint: Press the CURSOR RIGHT
3 or LEFT 2 buttons to obtain
natural skin tones.
Color Temp: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
to select NORMAL, COOL, or
WARM picture preferences. (NORMAL will keep the whites, white;
COOL will make the whites, bluish;
and WARM will make the whites,
reddish.)
Contrast +: Press the CURSOR
RIGHT 3 or LEFT 2 buttons to
toggle the control On or OFF. The
Contrast + control helps to “sharpen” the picture quality. The black
portions of the picture become richer in darkness and the whites
become brighter.
OW TO
USE THE SOUND CONTROLS (20MS233S ONLY)
50
1
Treble Boost: Press the 3 or 2
buttons to turn the control On or
Off. When On, the control will
enhance the high frequency sounds.
2
Bass Boost: Press the 3 or 2
buttons to turn the control On or
Off. When On, the control will
enhance the low frequency sounds.
On
Balance: Press the 3 or 2 buttons to adjust the level of sound coming from the left and right speakers.
Brightness
65
Color
50
Picture
50
Sharpness
50
Tint
Color Temp.
Contrast +
0
Normal
Warm
or
Cool
On
Off
3
4
AVL: (Auto Volume Leveler) Press
the 3 or 2 buttons to turn the
control On or Off. When On, AVL
will level out the sound being heard
when sudden changes in volume
occur during commercial breaks or
channel changes.
5
Sound: Press the 3 or 2 buttons
to select between Stereo or Mono
settings. Note: If Stereo is not present on a selected show and the TV is
placed in the Stereo mode, the
sound coming from the TV will
remain in the Mono mode.
Treble Boost
Bass Boost
Balance
AVL
Sound
L
5
6
CH
7
8
3
9
CH
A/CH
0
CC
VOL
POWER
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
1
VOL
EXIT
MENU
OR
MUTE
SLEEP
SURF
3
5
SMART
PICTURE
SOUND
1
2
3
4
Instalar
Idioma
Sintonia
Auto Programa
Editar Canal
MAGNAVOX
5
Main
Picture
Sound
Features
Install
6
Brightness
Color
Picture
Sharpness
Tint
More...
1
2
4
5
6
CH
7
8
3
9
CH
A/CH
0
CC
VOL
Language
Tuner Mode
Auto Program
Channel Edit
POWER
VOL
STATUS
Main
Picture
Sound
Features
Install
EXIT
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
Antenna
1
MENU
2
4
OR
MUTE
SLEEP
SURF
SMART
PICTURE
SOUND
3
5
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
Cable
MAGNAVOX
OR
Install
Language
Tuner Mode
Auto Program
Channel Edit
English
Auto
6
HELPFUL HINT
13
HOW TO USE THE FORMAT CONTROL (EXPAND 4:3)
any times while watching movies from
a DVD player the image is shown in
“letter box” format. This is the format that is
shown in movie theaters. When shown on a
TV screen, the image will have areas of
black on top and bottom of the screen.
Press the MENU button on the
remote to display the on-screen
menu.
Press the CURSOR DOWN
button until the word FEATURES is highlighted.
Press the CURSOR RIGHT 3
button to display the FEATURES
menu options (SmartLock or
Format).
Press the CURSOR DOWN
button until the word FORMAT
is highlighted.
Press the CURSOR RIGHT 3
or CURSOR LEFT 2 buttons
to select one of the two options 4:3
or Expand 4:3.
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture
to fill out the entire screen area,
eliminating the “letter box” effect.
When finished, press the STATUS/EXIT button to remove the
menu from the TV’s screen.
Note: The Expand 4:3 format can also
be activated using the CURSOR UP 8
or DOWN
buttons when the
onscreen menu is not being displayed.
Pressing these buttons will toggle the
standard 4:3 format and the Expand 4:3
format.
M
Sound
Treble Boost
Bass Boost
Balance
AVL
Sound
2
4
Language
Tuner Mode
Auto Program
Channel Edit
It does not change the other onscreen text features such as Closed
Caption (CC) TV shows.
T
Picture
Brightness
Color
Picture
Sharpness
Tint
Color Temp.
Picture: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
until lightest parts of the picture
show good detail.
MUTE
SLEEP
VOL
NOTE: For model 13MT1533
Audio sound is only available
via the headphone
o adjust your TV sound, select and use the
Sound Menu Controls listed below.
o adjust your TV picture controls, select a
channel and use the Picture Menu Controls
listed below:
Brightness
Color
Picture
Sharpness
Tint
More...
12 H
1
Main
Picture
Sound
Features
Install
The Language control only makes
the TV’s on-screen MENU items
appear in English or Spanish text.
Continued on Next Panel
T
Main
Picture
Sound
Features
Install
6
MAGNAVOX
Brightness
Color
Picture
Sharpness
Tint
More...
STATUS
2
4
HOW TO USE THE TUNER MODE CONTROL
he TUNER MODE control allows you
to change the TV’s signal input to
either ANTENNA, CABLE, or AUTO
mode. It’s important for the TV to know
what type of signal that is connected.
(From a Cable TV signal or a normal
Antenna signal.) In the AUTO mode,
when the AUTO PROGRAM feature is
activated, the TV will automatically
choose the correct mode.
Press the MENU button on
the remote to show the onscreen menu.
Press the CURSOR UP 8 or
DOWN buttons to scroll
through the on-screen menu until
the word INSTALL is highlighted.
Press the CURSOR RIGHT
button to display the
INSTALL menu features.
Press CURSOR UP 8 or
DOWN buttons to scroll
the Install features until the
words TUNER MODE is highlighted.
Press the CURSOR RIGHT
button to select either
ANTENNA, CABLE, or
AUTO mode.
When finished, press the
STATUS /EXIT button to
remove the on-screen menu
from the TV’s screen.
T
Main
Picture
Sound
Features
Install
6
8
6
SMART PICTURE Button
Press to choose a picture setting.
Details are on panel 23.
HOW TO ADD OR DELETE CHANNELS
When finished, press the STATUS /EXIT button to remove the
menu from the TV’s screen.
POWER button
Press to turn the TV on or off.
EXIT
3
MAGNAVOX
5
6
CHANNEL
Stereo models (red and
white AUDIO IN jacks)
To load the supplied batteries into
the remote:
Remove the battery compartment lid on the back of the
remote.
Place the batteries (two AA)
in the remote. Be sure the (+)
and (-) ends of the batteries line up
correctly (as marked inside the
remote).
Reattach the battery lid.
8
4
6
2
AUDIO
Non-Stereo
models (white
AUDIO IN jack)
C
Brightness
Color
Picture
Sharpness
Tint
More...
1
ó VOLUME +
MENU
VIDEO
hannel Edit makes it easy for you to ADD
or DELETE channels from the list of channels stored in the TV’s memory.
Main
Picture
Sound
Features
Install
AUDIO
8
1
2
MENU
VIDEO
Point the remote control toward
the remote sensor on the front of
the TV when operating the TV.
10
Y
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PROGRAM
is activated.
Press the MENU button
on the remote to show the
on-screen menu.
Press the CURSOR UP 8
or DOWN
buttons to
scroll through the on-screen
menu until the word
INSTALL is highlighted.
Press the CURSOR
RIGHT
button to display the INSTALL menu
features.
Press CURSOR UP 8 or
DOWN
buttons to
scroll the Install features until
the words AUTO PROGRAM are highlighted.
Press the CURSOR
RIGHT 3 button to start
the Auto Program scanning
of channels. Auto
Programming will store all
available channels in the TV’s
memory then tune to the
lowest available channel
when done.
When finished, press the
STATUS/EXIT button to
remove the menu from the
TV’s screen.
4
ANTENNA
IN
ANTENNA
OUT
NOTE: For model 13MT1533
Audio sound is only available
via the headphone
our TV can automatically set itself
for local area (or Cable TV) channels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+) or (–)
buttons are pressed.
For Customer Use
NUMBER Buttons
Press the Number buttons to select TV
channels or to enter values in the menu.
For single-digit channels, press the
Number button for the channel you
want. The TV will pause briefly before
going to the chosen channel.
Connect
headphones
(not supplied) to the
; jack.
1
2
POWER
2
R AUDIO
16.
75Ω
1
2
3
Cable Signal IN
from the Cable
Company
8
8
1
OUT
15.
22.
Rear of TV
Twin Lead
Wire
2
F
Press POWER to turn on the
TV.
Press VOLUME + to increase
the sound level. Press VOLUME
– to lower the sound level.
Press both buttons at the
same time to display the TV’s
on-screen menu. Once in the
menu, use these buttons to make
menu adjustments or selections.
Press CHANNEL ;8 or 9 to
select TV channels.
Battery Installation
Front Jack panel of TV
VIDEO
Basic TV and Remote Control Illustrations
Remote Control
MENU
Yellow
Video
cable
14.
75Ω
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Company
supplied cable to the signal
IN(put) plug on the back of the
Cable Box.
Using a separate round coaxial
cable, connect one end to the
OUT(put) (TO TV) plug on
the back of the Cable Box.
Connect the other end of the
round coaxial cable to the 75Ω
input on the back of the television.
Screw it down finger tight.
NOTE: If applicable, set the OUTPUT
CHANNEL SWITCH on the back of the
cable box to CH 3 or 4. Tune the TV to
the same channel and change channels
at the cable box. In some cases, the
cable box will automatically tune to
either channel 3 or 4, change channels
until the picture appears.
8
3
5
IN
ó VOLUME +
Press the PLAY
button on
the accessory device to view
playback, or to access the accessory device (camera, gaming unit,
etc.).
13.
21.
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
8
Press the CH+ or CH- button on the remote control to
tune the TV to the front input
jacks. “AV” will appear on the TV
screen.
s
11.
12.
1
8
3
White
Audio cable
Stereo Devices:
Turn the TV and the accessory
device ON.
9
AUDIO
MENU
VIDEO
IN
5
4
Front Jack panel of TV
Yellow
Video
cable
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Visit our World Wide Web Site at http://www.magnavox.com
MENU
VIDEO
For Mono Devices: Connect
one end of the audio cable from
the Audio Out jack on the device
to the Audio In (white) jack on
the FRONT of the television.
“bolt of lightning” indicates uninsut This
lated material within your unit may
20.
I
A
IB8470E001
1
2
For Stereo Devices: Connect
one end of the audio cables from
the Audio Out jacks on the
device to the Audio In (red and
white) jacks on the FRONT of
the television.
3
4
P.S. Remember, to get the most from
your MAGNAVOX product, you must
return your Warranty Registration Card
within 10 days. So please mail it to us
right now!
8
2
while with your product.
10.
19.
Television
A
1
www.magnavox.com
or
call 1-800-705-2000
SmartPictureTM, SmartSoundTM, and SmartLockTM are registered trademarks of Philips Consumer Electronics North
America. Copyright © 2003 Magnavox. All rights reserved.
udio and Video Front Inputs are avail- Mono Devices
able for a quick connection of a VCR,
to playback video from a camera, or
attach a gaming device. Use the AV button on the remote control to tune these
inputs.
Connect the video (yellow)
cable from the Video output on
the Camera (or accessory device)
to the Video (yellow) Input located on the FRONT of the TV.
Read your User Manual first for quick tips that make using
your Magnavox product more enjoyable. If you have read
your instructions and still need assistance you may access our
online help at
8
3
Subject
Panel No.
Picture Menu Controls . . . . . . . . . . . . . .11
Remote Batteries . . . . . . . . . . . . . . . . . . . .4
Remote Control Button Descriptions .5-6
Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . .22
SmartLock™ Controls
Access Code . . . . . . . . . . . . . . . . . . . . .15
Block Channels . . . . . . . . . . . . . . . . . . .16
Blocking/Clearing All Channels . . . . . . .17
Movie Ratings . . . . . . . . . . . . . . . . . . . .18
Other Blocking Options . . . . . . . . . . . .20
TV Ratings . . . . . . . . . . . . . . . . . . . . . . .19
Understanding SmartLock™ . . . . . . . .14
SmartPicture™ Control . . . . . . . . . . . . .23
SmartSound™ Control . . . . . . . . . . . . . .24
SmartSurf . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . .27
9.
18.
Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
Power Lines - An outdoor antenna should be located away from
power lines.
Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.
Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
8
Subject
Panel No.
Alternate Channel . . . . . . . . . . . . . . . . . .26
Antenna Basic Connection . . . . . . . . . . . .1
Front Audio/Video Input Jacks . . . . . . . . .3
Automatically Program TV . . . . . . . . . . . .9
Basic Cable Connection . . . . . . . . . . . . . .1
Basic Remote Operation . . . . . . . . . . . . . .4
Basic Television Operation . . . . . . . . . . . .4
Cable Box Connection . . . . . . . . . . . . .1-2
Cable TV Control (Tuner Mode) . . . . . . .8
Care and Cleaning . . . . . . . . . . . . . . . . . .28
Channel Edit . . . . . . . . . . . . . . . . . . . . . .10
Closed Caption Control . . . . . . . . . . . . .21
Factory Service Locations . . . . . . . . .30-31
Format Control . . . . . . . . . . . . . . . . . . . .13
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .29
Language Control . . . . . . . . . . . . . . . . . . .7
Limited Warranty . . . . . . . . . . . . . . . . . .32
safetysymbols
ry!
Hur
D
26
25
PANEL PANEL PANEL PANEL PANEL PANEL
8.
Know these
ATION
EEDED W
24
23
R
ST
N
22
Returning your Warranty
Registration Card right away
guarantees you’ll receive all
the information and special
offers which you qualify for
as the owner of your model.
Congratulations on your
purchase, and welcome to
the “family!”
Thank you for choosing Magnavox.
PANEL PANEL PANEL PANEL
Your completed Warranty
Registration Card serves as
verification of ownership in
the event of product theft or
loss.
I
20
19
18
17
PANEL PANEL
21
PANEL PANEL
PANEL PANEL
16
15
14
13
Registering your product
within 10 days confirms your
right to maximum protection
under the terms and conditions of your MAGNAVOX
warranty.
S REG
PANEL PANEL
Side 2
12
11
Model
Registration
HIN 10
10
9
Owner
Confirmation
17.
f you cable signal uses a cable box or
decoder, follow the easy steps below to
complete the connection.
On
or Off
On
or Off
R
On
or Off
Mono
or Stereo
1
2
3
4
5
6
Brightness
Color
Picture
Sharpness
Tint
More...
1
2
4
5
6
CH
7
8
3
9
CH
A/CH
0
CC
VOL
VOL
STATUS
5
Main
Picture
Sound
Features
Install
SmartLock
Format
Features
SmartLock
Format
POWER
EXIT
2
4
4:3
1
MENU
OR
MUTE
SLEEP
VOL
SURF
SMART
PICTURE
SOUND
3
5
Features
SmartLock
Format
Expand 4:3
MAGNAVOX
6
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
14
UNDERSTANDING THE SMARTLOCK™ CONTROLS
he SmartLock™ feature is an integrated circuit that receives and processes data sent by
broadcasters, or other program providers, that
contain program content advisories. When programmed by the viewer, a TV with SmartLock™
can respond to the content advisories and block
program content that may be found objectionable (such as offensive language, violence, sexual
situations, etc.). This is a great feature to censor
the type of viewing children may watch.
SmartLock™ offers various BLOCKING controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
Clear All - Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
Block All - Allows you to block ALL channels and A/V inputs at one time.
Movie Ratings - Certain blocking options
exist which will block programming based on
ratings patterned by the Motion Pictures
Association of America.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
T
Main
Picture
Sound
Features
Install
8
PANEL PANEL PANEL PANEL PANEL PANEL
Warranty
Verification
AY
13MT143S
13MT1532
13MT1533
20MT133S
20MS233S
8
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or
the Electronic Industries Alliance: www.eiae.org
Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A.
The power supply cord or the plug has been damaged; or
B.
Objects have fallen, or liquid has been spilled into the appliance; or
C.
The appliance has been exposed to rain; or
D.
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E.
The appliance has been dropped, or the enclosure damaged.
Cable Box Connections
2
Basic Antenna Connection
combination antenna receives normal
broadcast channels (VHF 2-13 and
UHF 14-69). Your connection is easy
since there is only one 75Ω (ohm)
antenna plug on the back of your TV and that’s where the antenna goes.
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the
TV. Go to step 2.
If your antenna has flat twinlead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter (not supplied with
TV).
Push the round end of the
adapter or antenna cable onto
the 75Ω jack on the rear of the
TV. If the round end of the
antenna cable is threaded, screw
it down tight.
8
6
5
1.
2.
3.
4.
5.
6.
7.
1
8
PANEL PANEL PANEL PANEL
4
3
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a
MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Color Television
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
8
2
1
Side 1
PANEL PANEL
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
USER MANUAL
PANEL
SAFETY PANEL
INFO
MODEL
REGISTRATION
INFORMATION
IT
PANEL LAYOUT
Panel
Sequence COVER
and
Panel Index
4:3
Expand 4:3
MOVIE RATINGS
G: General Audience - All ages admitted.
Most parents would find this program suitable for all ages.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
MOVIE RATINGS Continued
R: Restricted - This is programming is specifically designed for adults. Anyone under the
age of 17 should only view this programming
with an accompanying parent or adult guardian.
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
TV-Y7 -- It may be appropriate for children
age 7 and above who have acquired the development skills needed to distinguish between
make-believe and reality.
TV-G -- Suitable for most audiences, this type
of programming contains little or no violence,
no strong language, and little or no sexual dialogue or situations.
TV-PG -- This program contains material
that parents may find unsuitable for younger
children. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
TV-14 -- This program contains some material that many parents would find unsuitable for
children under 14 years of age. This type of
programming contains one or more of the following: intense violence (V), intense sexual situations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
TV-MA -- This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17. This
type of programming contains one or more of
the following: graphic violence (V), explicit sexual situations (S), or crude indecent language
(L).
Features
SmartLock
Format
Access Code
----
Access Code
XXXX
5
Features
SmartLock
Format
Features
SmartLock
Format
Access Code
XXXX
Incorrect
5
Features
SmartLock
Format
1
6
7
1
New Code
----
2
4
3
6
5
4
CH
2
4
7
8
9
CH
0
CC
VOL
VOL
MUTE
SLEEP
SURF
2
4
Press the CH + or CH – button
to select other channels you wish
to block. Repeat step 2 to block
the new channel.
1
When finished, press the STATUS/EXIT button to remove the
menu from the screen.
2
4
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
3
5
6
CH
7
8
9
CH
0
CC
SMART
PICTURE
SOUND
VOL
22
Y
3
EXIT
MENU
MUTE
SLEEP
SURF
SMART
PICTURE
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
2
2
CC Off
1
3
2
3
4
5
6
CH
7
8
9
CH
A/CH
0
CC
CC Off
POWER
CC1
CC2
VOL
EXIT
MENU
MUTE
SLEEP
SURF
1
2
If BLOCK ALL is selected,
press the CURSOR RIGHT 3
button to turn the control ON or
OFF. When ON is selected, ALL
available channels will be blocked
from viewing.
Off
Block All
3
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
23
W
2
3
4
5
6
Press the SLEEP button on the
remote control and the SLEEP
timer display will appear on the
screen.
Sleep 15
Press the SLEEP button repeatedly to pick the amount of time
(15, 30, 45, 60, 90, 120, 180, or 240
minutes) before the TV will turn
itself off.
NOTE: An on-screen count down will
appear during the last minute before the
TV shuts itself off. If any button is
pressed during the last minute of the
countdown, the Sleeptimer setting will
be cancelled.
Sleep 15
1
4
1
2
CC Mute
2
3
6
5
POWER
CH
7
8
9
CH
A/CH
0
CC
VOL
VOL
STATUS
EXIT
7
8
9
CH
A/CH
0
CC
VOL
1
VOL
Sleep 45
Sleep 60
Sleep 90
2
Press the SMART PICTURE
button repeatedly to select either
PERSONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTIMEDIA
picture settings.
MUTE
SLEEP
SMART
PICTURE
G
PG
PG-13
R
NC-17
X
Movie Rating
G
PG
PG-13
R
NC-17
X
Press the CURSOR UP 5 or
DOWN
buttons to highlight any
of the Movie Rating options. When
highlighted, all these options can be
turned ON (which will allow blocking)
or OFF (which will allow viewing).
Use the CURSOR RIGHT 3 button on the remote to turn the rating
option ON or OFF.
1
2
3
Off
G
On
1
2
3
4
5
6
CH
7
8
9
CH
A/CH
0
CC
VOL
1
3
VOL
STATUS
EXIT
MUTE
SURF
SMART
PICTURE
2
SOUND
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
1
3
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
MUTE
SLEEP
SURF
2
4
SMART
PICTURE
SOUND
he Smart Sound feature allows the listener to select between four different
factory set sound options.
Press the SMART SOUND button on the remote control. The current Smart Sound setting will appear
in the middle of the screen.
2
Press the SMART SOUND button repeatedly to toggle between
the four settings. (PERSONAL,
VOICE, MUSIC, or THEATRE)
Personal
1
NOTE: The way you choose to set the
Picture Menu Controls will become your
PERSONAL setting.
2
3
6
Movies
POWER
4
5
7
8
9
CH
A/CH
0
CC
VOL
CH
Sports
Weak Signal
1
2
3
4
5
6
POWER
Theatre
CH
7
8
9
CH
A/CH
0
CC
VOL
Music
Voice
VOL
STATUS
EXIT
Multimedia
EXIT
MENU
MUTE
SLEEP
Sleep 240
Personal
VOL
STATUS
Sleep 180
NOTE: The way you choose to set the
Sound Menu Controls will become your
PERSONAL setting.
SURF
SMART
1
2
MENU
1
2
MUTE
SLEEP
PICTURE
SURF
SMART
PICTURE
Block All, V, S, L, D
Block All, V, S, L, D
Block All, V, S, L
TV-MA
1
2
3
1
3
5
POWER
4
5
6
CH
7
8
9
CH
25
A/CH
0
CC
VOL
VOL
STATUS
2
4
6
EXIT
MENU
MUTE
SLEEP
SURF
SMART
PICTURE
SOUND
USING THE SMARTSURF™ CONTROL
10
Surf
10
Add
Surf List Empty
10
Surf
10
1
4
2
3
6
5
HELPFUL HINT
MAGNAVOX
Not all TV programs and product commercials are made with
Closed Caption (CC) information
included. Neither are all Closed
Caption modes (CC1, or CC2) necessarily being used during the transmission of a closed caption program.
Refer to your area's TV program listings for the stations and times of
Closed Caption shows.
During the last minute
of a Sleeptimer setting,
an on-screen count
down will be displayed.
Pressing any button during the last minute will
cancel the Sleeptimer.
MAGNAVOX
9
CH
CC
VOL
Good Bye
9 Sec
45 Sec
TROUBLESHOOTING
Remote Does Not Work
•Check the batteries. If necessary, replace
them with 2 AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote
control sensor window on the TV.
•Check the TV power cord. Unplug the
TV, wait 10 seconds, then reinsert the
plug into the outlet and push the POWER
button again.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•Check to be sure the TV outlet is not on
a wall switch.
TV Displays Wrong Channel or No
Channels Above 13
•Repeat channel selection.
•Add the desired channel numbers (using
the CHANNEL EDIT control) into the
TV’s memory.
•Check to be sure the TUNER MODES are
set to the CABLE option and run the Auto
Program feature to find all available channels.
28
CARE AND CLEANING
WARNING Concerning Stationary
Images on the TV Screen:
Do not leave stationary or letterbox
images on screen for extended periods of time. This can cause uneven
picture-tube aging.
Normal use of the TV should involve the
showing of pictures that contain constantly
moving and changing images that fill the
screen. Be careful not to leave nonmoving
images on screen for extended periods of
time, or to display the same images on
screen too frequently, because subtle
ghost images can be left on the picture
tubes. Sources of stationary images may
be DVD disks, laser disks, video games,
CD-i disks, videotapes, digital television
boxes, broadcast channels, cable channels,
satellite channels, and others. Here are
some examples of stationary images
(this is not an all-inclusive list; you
may encounter others in your viewing):
• DVD menus—listings of DVD disk
content
• Letterbox black bars—shown at the
top and bottom of the TV screen when
a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect
ratio.
• Video-game images and scoreboards
• Television station logos—present a
problem if they are bright and stationary; moving or low-contrast graphics
are less likely to cause uneven aging of
the picture tube
• Stock-market tickers—presented at
the bottom of the TV screen
• Shopping channel logos and pricing displays—bright and shown constantly or repeatedly in the same location on the TV screen.
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where temperatures can become excessively hot;
for example, in direct sunlight or near a
heating appliance.
• Be sure to allow a free flow of air to
and from the perforated back cover of
the set.
CLEANING
• To avoid possible shock hazard, be sure
the TV is unplugged from the electrical
outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to keep the TV clean.
• When cleaning the TV, take care not to
scratch or damage the screen surface.
Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front screen with a clean
cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a
clean cloth or sponge dampened in a
solution of cool, clear water and a mild
soap or detergent. Use a clean, dry
cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation
holes or slots in the back cover of the
set.
• Never use thinners, insecticide sprays,
or other chemicals on or near the cabinet, as they might cause permanent
marring of the cabinet finish.
29
MOVIES - Preset picture
options for watching
Video Tapes, or DVDs.
SPORTS - Preset picture options for watching
sporting events.
WEAK SIGNAL Preset picture options for
watching programs where
the reception is not at its
best.
MULTIMEDIA - Preset
picture options for use
with video gaming.
GLOSSARY
Auto Programming • The procedure of
adding or deleting channel numbers into
the Television’s memory circuits. In this
format the Television “remembers’’ only
the locally available or desired channel
numbers and skips over any unwanted
channel numbers.
Coaxial Cable • A single solid antenna
wire normally matched with a metal plug
(F-type) end connector that screws (or
pushes) directly onto a 75 Ohm input
found on the Television or VCR.
Closed Caption • Broadcast standard
which allows you to read the voice content of television programs on the TV
screen. Designed to help the hearing
impaired this feature uses on-screen "text
boxes" to show dialogue and conversations while the TV program is in progress.
Side Audio/Video Inputs • Located on
the side of the TV these connectors
(phono type plug) are used for the input
of audio and video signals. Designed for
easy use with VCRs or cameras.
On Screen Displays (OSD) • Refers to
the wording or messages generated by the
television (or VCR) to help the user with
specific feature controls (color adjustment,
programming, etc.).
Remote Sensor Window •
or opening found on the Television control panel through which infrared remote
control command signals are received.
THEATRE - Preset
sound options for watching movies.
MUSIC - Preset sound
options for musical programming where there is
little or no dialogue.
VOICE - Preset sound
options for programming
where heavy dialogue is
30
MAGNA
A
X
L
WARRANTY
Days
a
ay
,
the
against
p,
y
Status/Exit • Allows the user to quickly
confirm what channel number is currently
being viewed. Status can also be used to
clear the Television of on screen displays
or information (rather than waiting for the
displays to “time out” or automatically disappear from the screen).
or
by these
or
eceipt
Surf • The action of scanning specific
channel in a limited channel list.
is determined to be defec-
o-
for
yys
will
Twin Lead Wire • The more commonly
used name for the two strand 300 Ohm
antenna wire used with many indoor and
outdoor antenna systems. In many cases
this type of antenna wire requires an additional adapter (or balun) in order to connect to the 75 Ohm Input terminals
designed into the more recent Televisions
and VCRs.
S.
…
Tuner Mode • Feature control settings
made by the TV. Designed for first time
set up and use. Settings for signal connections (antenna or cable TV), plus channel
program memory are held in the TV's
memory (even if the set is unplugged and
moved to a new location.)
the
Menu • An on-screen listing of feature
controls shown on the Television screen
that are made available for user adjustments.
SER
R
IN
((French Speaking)
g)
Speaking)
or
y,
warranty
,
an
not
you
to
P.O.
33152
(402) 536-4171
3
4
No Rating
On
1
2
4
5
6
CH
7
8
VOL
STATUS
9
CH
A/CH
0
CC
VOL
1
3
MENU
12
SURF
SMART
PICTURE
SOUND
Press the A/CH button on the
remote control. The channels will
toggle between the current channel
and the last viewed channel.
2
3
6
5
POWER
CH
7
8
9
CH
A/CH
0
CC
VOL
VOL
STATUS
EXIT
MENU
MUTE
SLEEP
SMART
PICTURE
12
Surf
10
12
4
Add
MAGNAVOX
Press SURF repeatedly
during TV viewing to scan
through the channels in
the SURF list.
Delete
MUTE
SURF
SMART
PICTURE
ALTERNATE CHANNEL
SURF
MUTE
VOL
MAGNAVOX
1
1
3
MENU
SLEEP
When highlighted, each feature can
be turned ON or OFF using the
CURSOR RIGHT 3 or LEFT
2 buttons on the remote.
POWER
EXIT
EXIT
SLEEP
3
STATUS
4
Press the CURSOR UP 5 or
DOWN
buttons to highlight
the desired feature.
our remote control has an Alternate
Channel button that allows you to toggle
between the current and previous channel.
For instance, if you are watching two games
on TV, you can enter the channel numbers
once and flip between the two channels
with the touch of only one button.
After entering the two channels numbers,
so that one is the last viewed channel and
the other is the current channel, follow the
step below.
1
MAGNAVOX
MAGNAVOX
On
On
4
POWER
8
0
SOUND
During the last 10
seconds of a
Sleeptimer setting,
an on-screen display will read
GOOD BYE.
Blocking
Unrated
UNRATED: ALL unrated programs
based on the Movie Ratings or Parental
(TV) Guidelines can be blocked if this feature is set to ON and the BLOCKING
feature is set to OFF.
Delete
CH
7
A/CH
12
Surf
10
12
4
SOUND
SOUND
BLOCKING: Might be called the “master switch” for SmartLock™. When ON,
ALL blocking/censoring will take place.
When OFF, ALL blocking is disabled.
Y
Press CH +/– or the Number
buttons to select a channel to add
to the SURF list.
Press 3 or 2 to add the channel to the SURF list or delete
it from the list. An on-screen
message will indicate whether you
are adding or deleting the channel.
Repeat steps 1 through 3 to add
additional channels (up to eight) to
the SURF list.
Press the CURSOR RIGHT 3
button to display the Blocking
Options (BLOCKING, UNRATED, or NO RATING) menu.
26
S
Press SURF while the channel
number appears.
2
SmartLock
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Block Options
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
martSurf lets you set up to eight channels in a quick viewing list. Then, you
can use the SURF button on the remote
control to switch between different TV programs that currently interest you.
1
2
3
Press the CURSOR UP 5 or
DOWN
buttons until the
words BLOCKING OPTIONS
are highlighted.
NO RATING: ALL programming with
NO content advisory data can be
blocked if set to ON and the BLOCKING feature is set to OFF.
MAGNAVOX
SOUND
Sleep off
TV-PG
TV-14
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
1
Off
TV-G
6
24 USING THE SMARTSOUND™ CONTROL(20MS233S ONLY)
T
1
On
Block All, FV
TV-Y7
1
3
5
OTHER SMARTLOCK™ BLOCKING OPTIONS
martLock™ offers the viewer other
blocking features as well. With these
Blocking Options, the censoring can be
turned ON or OFF.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
Off
TV-Y
5
MENU
MENU
20
S
TV Rating
T V-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
4
POWER
EXIT
SLEEP
Sleep 120
MENU
SURF
Sleep 30
Press the SMART PICTURE
button on the remote control. The
current Smart Picture setting will be
displayed on the screen.
Press the CURSOR RIGHT 3
button to display the MOVIE RATING options (G, PG, PG-13, R,
NC17, or X).
When a rating level is chosen to be
blocked, any higher level rating will also be
blocked from viewing. (i.e.: If “R” is selected to be blocked, NC-17 and X will automatically be blocked.)
USING THE SMARTPICTURE™ CONTROL
1
2
BLOCKING PROGRAMS BASED ON TV RATINGS
T
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
POWER
CH
STATUS
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
1
Press the CURSOR UP 5 or
DOWN
buttons to highlight the
words MOVIE RATING.
4
On
When finished, press the STATUS/EXIT button to remove the
menu from the screen.
1
3
hether you’re watching a movie or a
sporting event, your TV has automatic video control settings matched for your
current program source or content.
SMART
PICTURE
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
1
SETTING THE SLEEPTIMER CONTROL
VOL
STATUS
If CLEAR ALL is selected,
press the CURSOR RIGHT 3
button to clear all blocked channels. All channels will be viewable.
Cleared
Clear All
SOUND
our TV can be set to automatically turn
itself off at a given amount of time.
1
2
3
VOL
STATUS
1
1
Press the CURSOR UP 5or
DOWN
buttons to select
either CLEAR ALL or BLOCK ALL.
Clear ?Stop Time
Channel
Activate
Display
19
he SmartLock™ feature can block programming based on the TV Industry ratings.
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
Press the CURSOR UP 5 or
DOWN
buttons to highlight the
words TV RATING.
Press the CURSOR RIGHT 3
button to display the TV RATING
options (TV-Y, TV-Y7, TV-G, TVPG, TV-14, or TV-MA).
Press the CURSOR UP 5 or
DOWN buttons to highlight any
of the TV Rating options. When highlighted, all these options can be turned
ON (which will allow blocking) or OFF
(which will allow viewing).
NOTE: Some TV RATING options also
have sub-ratings. The ratings of TV-Y7, TVPG, TV-14, TV-MA can be customized to
block V (violence), FV (fantasy violence), S
(sexual situations), L (coarse language), or D
(suggestive dialogue).
Press the CURSOR RIGHT 3
button on the remote to turn the TVY or TV-G rating ON or OFF. Or,
press the CURSOR RIGHT 3
button to enter the sub-menus for the
TV-Y7, TV-PG, TV-14 or TV-MA ratings.
If the TV-Y7, TV-PG, TV-14 or TV-MA
sub-menu is accessed, press the
CURSOR UP 5 or DOWN
buttons to select one of the options
(Block All, V, S, L, D, or FV).
Press the CURSOR RIGHT 3
button on the remote to turn the
option ON or OFF.
T
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
POWER
4
1
fter blocking specific channels there
may come a time when you want to
block or clear all the channels at the same
time.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
On
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
----
3
5
MAGNAVOX
Press the CC button repeatedly
to choose from the four Closed
Caption options (CC Off, CC1,
CC2, or CC Mute). CC Mute will
activate Closed Captioning when the
MUTE button is pressed.
•Check the VOLUME buttons.
•Check the MUTE button on the remote
control.
•If you’re attempting to hook up auxiliary
equipment, check the audio jack connections located on the front of the TV.
OffStop Time
Channel
Activate
Display
MENU
HOW TO USE THE CLOSED CAPTION CONTROLS
No Power
•Check the TV power cord. Unplug the TV,
wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button
again.
•Check that the outlet is not on a wall
switch.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
No Picture
•Check antenna connections. Are they
properly secured to the TV's ANT 75Ω
plug?
•Check the TUNER MODE control for the
correct tuner setting.
•Try running the Auto Program feature to
find all available channels.
•Press the CH+ or CH- buttons on the
remote to make sure the correct signal
source is selected (FRONT or Current
Channel).
No Sound
(For model 13MT1533, connect up the
headphone before checking)
Press the CURSOR RIGHT 3
button to turn blocking ON or
OFF for that channel. When ON is
selected the channel will be
blocked.
A/CH
EXIT
Press the CC button on the
remote to display the current Closed
Caption setting.
27
Press the CURSOR UP 5or
DOWN
buttons until the
words BLOCK CHANNELS are
highlighted.
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
C
3
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
POWER
A/CH
STATUS
2
OffStop Time
Channel
Activate
Display
losed Captioning (CC) allows you to
read the voice content of television programs on the TV screen. Designed to help
the hearing impaired, this feature uses onscreen “text boxes” to show dialogue and
conversations while the TV program is in
progress.
When finished, press the STATUS /EXIT button to remove the
menu from the TV’s screen.
1
3
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Confirm Code
XXXX
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
1
2
A
Block Channel
7
21
fter your personal access code has been
set (see previous page), you are now
ready to select the channels or the A/V
Inputs you want to block out or censor.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
he SmartLock™ feature can block programming based on the Movie Industry ratings.
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
5
Features
SmartLock
Format
Timer
Start Time
Stop Time
Channel
Activate
Display
18
5
Features
SmartLock
Format
SmartLock
Format
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
5
1
2
3
4
5
6
Main
Picture
Sound
Features
Install
5
O
17
A
5
ver the next few panels you’ll learn how
to block channels and get a better
understanding of the rating terms for certain
programming.
First, let’s start by learning how to set a personal access code:
Press the MENU button on the
remote to show the on-screen
menu.
Press the CURSOR UP 5 or
DOWN buttons until the word
FEATURES is highlighted.
Press the CURSOR RIGHT 3
button to display the FEATURES
menu options.
Press the CURSOR UP 5 or
DOWN buttons until the
words SmartLock™ are highlighted.
Press the CURSOR RIGHT 3
button. The screen will read,
“ACCESS CODE - - - - .”
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX”
appears on the Access Code screen
as you press the numbered buttons.
“INCORRECT CODE” will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
The screen will ask you to enter a
“New Code.” Enter a “new” 4
digit code using the NUMBERED buttons. The screen will
then ask you to CONFIRM the code
you just entered. Enter your new
code again. “XXXX” will appear
when you enter your new code and
then display the SmartLock™ menu
options.
Proceed to the next panel to learn more...
HOW TO BLOCK CHANNELS
16
5
UP A SMARTLOCK™ ACCESS CODE
5
ETTING
5
15
SOUND
SOUND
2
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement