B Y R N E
Sheet 1 of 2
B Y R N E
I N S TA L L AT I O N I N S T R U C T I O N S F O R D B 1 5 H D V G A .
STEP 1:
Remove the cable from packaging.
Locate screws and nuts zip-tied to
end of cable.
STEP 2:
Pull the female end of the cable
through an open window in your
desk-height accessory.
320 Byrne Industrial Dr.,
Rockford, Michigan 49341
2009 Byrne Electrical Specialists, Inc. All Rights Reserved.
06/09/09
Phone (616) 866-3461
Fax (616) 866-3449
IS80084
Sheet 2 of 2
B Y R N E
I N S TA L L AT I O N I N S T R U C T I O N S F O R D B 1 5 H D V G A .
STEP 3:
Attach the female end of the cable
to the “HH” adapter found on the
provided Voice/Data Adapter Kit.
(see Voice/Data Adapter Kit
installation instructions for further
information)
STEP 4:
Pull the excess cable back
through the accessory and
snap the “HH” adapter into
place.
320 Byrne Industrial Dr.,
Rockford, Michigan 49341
2009 Byrne Electrical Specialists, Inc. All Rights Reserved.
06/09/09
Phone (616) 866-3461
Fax (616) 866-3449
IS80084
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising