HX-32 & HX-42 Security LED-Backlit Display

HX-32 & HX-42 Security LED-Backlit Display
HX-32 & HX-42 Security LED-Backlit Display
Table of Contents
3
Table of Contents
Safety warnings and precautions........................ 5
Important safety instructions ............................... 7
Notes on the LCD panel of this display........................ 7
Safety notice for remote control ................................... 8
Battery safety notice .................................................... 8
Package contents ............................................. 10
Optional accessory .................................................... 10
Setting up the display........................................ 11
Mounting the display .................................................. 11
Parts of the display and their functions ............. 13
Front/Rear panel .......................................................
Input/output terminals ................................................
Remote control ..........................................................
Using the remote control............................................
13
15
17
18
Connection........................................................ 19
Connecting audio/video signals ................................. 19
Connecting power ...................................................... 25
Basic operations ............................................... 26
Turning the display on or off ......................................
Locking/unlocking the controls...................................
Switching input signals ..............................................
Adjusting audio volume level .....................................
26
26
26
26
Network connection .......................................... 27
Connecting to a LAN.................................................. 27
Controlling the display ............................................... 27
The OSD (On-Screen Display) menu ............... 28
OSD menu overview ..................................................
Operations in the OSD menu.....................................
Picture menu ............................................................
Sound menu..............................................................
Screen menu.............................................................
Setting menu.............................................................
28
30
31
32
33
36
Product information........................................... 39
4
Table of Contents
Specifications .............................................................
Dimensions ................................................................
Supported input signal resolution...............................
Supported PAP input signal combination ...................
39
40
42
44
Troubleshooting ................................................ 45
Safety warnings and precautions
5
Safety warnings and precautions
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
THIS EQUIPMENT MUST BE
GROUNDED
To ensure safe operation, the threepin plug must be inserted only into
a standard three-pin power outlet
which is effectively grounded
through normal household wiring.
Extension cords used with the
equipment must have three cores
and be correctly wired to provide
connection to the ground. Wrongly
wired extension cords are a major
cause of fatalities.
The fact that the equipment
operates satisfactorily does not
imply that the power outlet is
grounded or that the installation is
completely safe. For your safety, if
you are in any doubt about the
effective grounding of the power
outlet, please consult a qualified
electrician.
• The mains plug of the power supply cord shall remain readily operable. The AC
receptacle (mains socket outlet) shall be installed near the equipment and shall
be easily accessible. To completely disconnect this equipment from the AC
mains, disconnect the power cord plug from the AC receptacle.
• Do not place this display on an uneven, sloping or unstable surface (such as a
trolley) where it may fall and cause damage to itself or others.
• Do not place this display near water, like a spa or pool, or in a position which will
allow the splashing or spraying of water onto the display, like in front of an open
window where rain water may enter.
• Do not install this display in a confined space without proper ventilation and air
circulation, such as in a closed cabinet. Allow proper space around the display
for dissipating heat inside. Do not block any openings and vents on the display.
Overheating may result in hazards and electric shock.
• Installation of this display should only be performed by a qualified technician.
Failure to install this display properly may cause injuries and damages to the
personnels and the display itself. Check the installation regularly and maintain
the display periodically to ensure the best working condition.
• Use only the accessories approved or recommended by the manufacturer to
mount this display. Using wrong or unsuitable accessories may cause the
display to fall and result in serious personal injuries. Make sure that the surface
and fixing points are strong enough to sustain the weight of the display.
• To reduce the risk of electric shock, do not remove covers. No user serviceable
parts inside. Refer servicing to qualified service personnel.
6
Safety warnings and precautions
• To prevent personal injuries, mounting the display or installing desktop stands is
required before use.
Important safety instructions
7
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Notes on the LCD panel of this display
• The Liquid Crystal Display (LCD) panel of this display has a very thin protective
layer of glass which is liable to marking or scratching, and cracking if struck or
pressured. The liquid crystal substrate is also liable to damage under excessive
force or extreme temperatures. Please handle with care.
• The response time and brightness of the LCD panel may vary with the ambient
temperature.
• Avoid placing the display in direct sun or where direct sun or spot lighting will
shine onto the LCD panel, as the heat may damage the panel and the external
casing of the display, and the bright light will make viewing the display more
difficult than necessary.
• The LCD panel consists of individual pixels to display images and is
manufactured according to the design specifications. While 99.9% of these
pixels work normally, 0.01% of the pixels may remain constantly lit (in red, blue
8
Important safety instructions
or green) or unlit. This is a technical limitation of the LCD technology and is not a
defect.
• LCD screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube)
screens, are also susceptible to 'screen burn-in' or 'image retention' which can
be found on the screen as visible fixed lines and shades. To avoid such damage
to the screen, avoid displaying still images (like On-Screen Display menus, TV
station logos, fixed/inactive text or icons) for more than two hours. Change the
aspect ratio from time to time. Fill the entire screen with the image and eliminate
the black bars whenever possible. Avoid displaying images in 4:3 aspect ratio
over a long period of time, otherwise there may be visible burn marks on the
screen as two vertical lines.
• Note: Under certain circumstances, condensation may occur on the inner side of
the cover glass, it's a natural phenomenon and will not affect the operation of the
display. This condensation will usually disappear after around 2 hours of normal
operation.
Safety notice for remote control
• Do not put the remote control in the direct heat, humidity, and avoid fire.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture. Failure to do so could
result in malfunction.
• Confirm there is no object between the remote control and the remote sensor of
the product.
• When the remote control will not be used for an extended period, remove the
batteries.
Battery safety notice
The use of the wrong type of batteries may cause chemical leaks or explosion.
Please note the following:
• Always ensure that the batteries are inserted with the positive and negative
terminals in the correct direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different
types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten
battery life or cause chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical
matter seeps out of the batteries, wipe it up immediately using a dry cloth, and
replace the batteries as soon as possible.
• Due to varying storage conditions, the battery life for the batteries included with
your product may be shortened. Replace them within 3 months or as soon as
you can after initial use.
Important safety instructions
9
• There may be local restrictions on the disposal or recycling of batteries. Consult
your local regulations or waste disposal provider.
10
Package contents
Package contents
Open the sales package and check the contents. If any item is missing or
damaged, please contact your dealer immediately.
LCD display
Power cord
AAA batteries
CD
D-Sub (15-pin)
cable
Remote control
• The type of power cord supplied may differ from that illustrated depending on your
region of purchase.
• Before discarding the package, check that you haven't left any accessories inside the
box.
• Dispose of packaging materials wisely. You can recycle the cardboard carton. Consider
storing the package (if possible) for future transport of the display.
• Do not leave plastic bags within reach of young children or babies.
Optional accessory
In addition to the items that come with the standard package, the following
optional accessory is also available separately:
STD-02 (Stand for HX-32) STD-03 (Stand for HX-42)
Desktop stand
Setting up the display
11
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting
bracket or on a horizontal surface with the optional desktop stands. Please pay
attention to the following notes during installation:
• This display should be installed by at least two adult persons. Attempting to
install this display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause
the display to fall or malfunction.
Installing the display on a wall
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting
*Screw type: M6
400mm
screw holes on the back of
the display as shown in the
illustration.
200mm
5. Install the wall mounting
bracket on the display and
attach the display to the wall
according to the mounting
bracket’s instructions. The
length of the screw should
exceed the thickness of the
wall mounting bracket by at
least 10 mm. Make sure that
all screws are tightened and
secured properly.
(Recommended torque: 470 635N•cm). The mounting
means should be strong
enough to bear the weight of
the display.
Thickness of the
wall mounting
bracket
LCD display
10 mm
(0.39")
12
Setting up the display
• To maintain proper ventilation, keep at least 10 mm
of clear space from the back cover of the display to
the wall.
• Please consult a professional technician for wall
mount installations. The manufacturer accepts no
liability for installations not performed by a
professional technician.
10mm
(0.39")
• The AC IN/OUT socket should be on top of
connectors when rotating your display.
Installing the optional desktop stands
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Place the desktop stands on the
(HX-32)
display as illustrated.
4. Use the screws and a suitable
screwdriver to secure the stands
on the display.
(HX-42)
Screw Type: M4
Screw Length: 10 mm
Torque: 10
Parts of the display and their functions
13
Parts of the display and their functions
Front/Rear panel
2
3
4
5
6
7
1
No.
Name
Description
• Receives command signals from the remote control.
1
Remote control sensor • Detects ambient lighting conditions around the display
/ Ambient light sensor / and adjusts screen brightness automatically when the
Power indicator
Ambient Light Sensor function is activated.
2
ENTER/VIDEO
SOURCE
• Indicates the operating status of the display:
- Lights up green when the power is turned on.
- Lights up red when the display is turned off.
- Lights up red when the display is in Power Save
High mode.
- Flashes red when the display is in Power Save
Low mode.
- Off when the main power is turned off.
• Selects a video source.
3
MENU
• Confirms your selection or enters a submenu in the OnScreen Display (OSD) menu.
Opens or closes the OSD menu.
4
///
• Scrolls through settings and options in the OSD menu.
Power button
•  / : Hot keys for audio volume adjustment.
Turns the display on or off.
5
14
6
Parts of the display and their functions
Power indicator
Indicates the power status of the display:
- Lights up green when the power is turned on.
- Lights up red when the display is turned off.
- Lights up red when the display is in Power Save
High mode.
- Flashes red when the display is in Power Save
Low mode.
- Off when the main power is turned off.
Parts of the display and their functions
15
Input/output terminals
20
RS-232C-OUT
RS-232C-IN
1
2
No
.
3
4
5
Name
6
7 8
9 10 11 12
13
14 15
16
17
18
19
20
Description
1
RJ-45
Connects to the RJ-45 port on your Ethernet or router.
2
RS232C IN/OUT
For external control and multi-display operation.
• RS232C IN: receives control signals from a computer or
another display.
3
DISPLAY PORT
• RS232C OUT: outputs control signals from the RS232C IN
input to another display.
Connects to a DisplayPort compatible device.
4
DVI-OUT
Outputs DVI signals from the DVI-IN to another display.
5
DVI-IN
6
HDMI-1/HDMI-2
7
VIDEO IN (YPbPr)
Receives DVI signals from an external device (such as a
computer).
Receives HDMI signals from an external device (such as a
Blu-ray disc player).
Receives component video (YPbPr) signals from an external
device (such as a DVD player, HDTV device or Laser disc
player).
Receives S-Video signals from an external device (such as a
VCR or DVD player).
Outputs composite video signals from the AV IN input to
another display.
Receives composite video signals from an external device
(such as a VCR or DVD player).
Outputs analog RGB signals from the VGA IN input to
another display.
Receives analog RGB signals from an external device (such
as a computer).
9
VIDEO IN (SVIDEO)
AV OUT
10
AV IN
11
VGA OUT
12
VGA IN
8
16
Parts of the display and their functions
15
AUDIO IN
(AUDIO1)
AUDIO IN
(AUDIO2)
AUDIO OUT (R/L)
Receives audio signals from an external device (such as a
computer).
Receives audio signals from an external device (such as a
VCR or DVD player).
Outputs audio signals to an external device.
16
SPEAKERS (R/L)
Outputs audio signals to external speakers.
Turns on or off the main power.
18
AC SWITCH ON/
OFF
AC IN
19
AC OUT
Relays the AC power from the AC IN jack to another display.
20
SDI-in/SDI-out
Connects SDI cables for SDI input/output signal.
13
14
17
Connects to a power outlet via the supplied power cord.
Parts of the display and their functions
Remote control
6
17
INFO
Shows the current input source and resolution.
1
2
6
7
3
7 Numeric buttons (1-9) /Input source
buttons
• Performs as numeric buttons when the OSD
menu is on.
• Performs as input source buttons when the
OSD menu is off.
SDI and MULTI-MEDIA functions are not available
with this display.
8
9
8
4
10
9
5
MENU
Opens or closes the OSD menu.
Numeric button (0)/MUTE
• Performs as a numeric button when the OSD
menu is on.
11
• Turns on or off the mute function.
10 /
Scrolls through settings and options in the
OSD menu.
11
1
ON/OFF
Turns the display on or off.
2
INPUT
Selects an input source.
3
EXIT
Returns to a previous menu or closes
the OSD menu.
4
/ VOL- // VOL+
• Scrolls through settings and options
in the OSD menu.
• Turns down/up the volume.
5
ENTER
Confirms your selection or save
changes.
MULTI-MEDIA buttons
These functions are not available with the
display.
18
Parts of the display and their functions
Using the remote control
Installing remote control batteries
1. Open the remote control battery compartment
cover.
2. Insert the supplied batteries ensuring that the
positive and negative marked battery terminals
match the (+) and (-) marks in the battery
compartment.
The supplied batteries are provided for your convenience
so that you can operate the display straight away. You
should replace them as soon as possible.
3. Refit the battery compartment cover.
Remote control usage tips
• Point and aim the top front of the remote control directly at the display’s remote
control sensor window when you press the buttons.
• Do not let the remote control become wet or place it in humid environments (like
bathrooms).
• If the display’s remote control sensor window is exposed to direct sunlight or
strong light, the remote control may not operate properly. In this situation,
change the light source, readjust the angle of the display or operate the remote
control from a location closer to display’s remote control sensor window.
Max. 10 m
(32.8 feet)
Connection
19
Connection
Connecting audio/video signals
Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices
you want to use. Be aware that incorrect connections may adversely affect
picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp
and pull the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1. Connect the VGA IN jack on the display to the VGA output jack on a computer
using a D-Sub (15-pin) cable.
2. Connect the computer’s audio output jack to the AUDIO IN (AUDIO1) jack on
the display using a suitable audio cable.
3. To view images from this input, press the VGA button on the remote control.
RS-232C-OUT
RS-232C-IN
D-Sub (15-pin) cable
Audio cable
Computer
The audio cable is not supplied and should be purchased separately.
20
Connection
Connecting the digital input
1. Connect the DVI-IN/DISPLAY PORT/HDMI-1/HDMI-2/SDI jack on the display
to the DVI-D/DisplayPort/HDMI output jack on a computer or equipment using
a DVI-D/DisplayPort/HDMI/SDI or a DVI-D to HDMI conversion cable.
2. If needed, connect the computer’s audio output jack to the AUDIO IN
(AUDIO1) jack on the display using a suitable audio cable.
3. To view video image from this input, press the DVI or DP/HDMI-1/HDMI-2
button on the remote control.
RS-232C-OUT
RS-232C-IN
DisplayPort
cable
SDI cable
HDMI
cable
Audio cable
DVI-D cable
Computer
DVI-D to HDMI
conversion cable
The cables are not supplied and should be purchased separately.
SDI device
Connection
21
Connecting the YPbPr component video input
1. Connect the VIDEO IN (YPbPr) jacks on the display to the component output
jacks on an A/V device (such as a VCR or DVD player) using a component
video cable.
2. Connect the DVD player’s audio output jacks to the AUDIO IN (AUDIO2)
jacks on the display using a suitable audio cable.
3. To view video image from this input, press the YPbPr button on the remote
control.
RS-232C-OUT
RS-232C-IN
Component video cable
Audio cable
DVD player / VCR
The cables are not supplied and should be purchased separately.
22
Connection
Connecting the AV and S-Video inputs
1. Connect the VIDEO IN (S-VIDEO) or AV IN jack on the display to the output
jack on an A/V device (such as a VCR) using an appropriate video cable.
2. Connect the VCR’s audio output jacks to the AUDIO IN jacks on the display
using a suitable audio cable.
3. To view video image from this input, press the AV button on the remote
control for the AV signal, or press the INPUT button repeatedly for the SVideo signal.
RS-232C-OUT
RS-232C-IN
S-Video cable
AV cable
Audio cable
DVD player / VCR
The cables are not supplied and should be purchased separately.
Connection
23
Connecting external speakers
The built-in amplifier on the display allows you to output audio signals through
external speakers. Connect external speakers to the SPEAKERS (R/L) jacks on
the display.
RS-232C-OUT
RS-232C-IN
External speakers
You can use the remote control or the control panel on the display to adjust the volume.
24
Connection
Connecting multiple displays
You can connect multiple displays serially (daisy chain) to a computer for
management. The number of displays you can connect serially depends on the
resolution of the input signal you use.
Additional display
RS-232C-OUT
RS-232C-IN
RS-232C
cable
DVI
cable
AV
cable
D-Sub (15pin) cable
SDI
cable
RS-232C-OUT
RS-232C-IN
The first display
• This RS-232C daisy chain application requires an RS-232C port equipped computer.
• Avoid using HDCP source for daisy chain application.
Connection
25
Connecting power
1. Plug one end of the power cord into the AC IN jack on the display and the
other end into an appropriate power outlet (if the outlet is switched, turn on the
switch).
2. Press the power switch to turn on the main power.
2
1
• The supplied power cord is suitable for use with 110-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which
appears damaged or frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power
boards.
• There are no user serviceable parts in this display. Never unscrew or remove any
covers. There are dangerous voltages inside the display. Turn off the power and unplug
the power cord if you intend to move the display.
26
Basic operations
Basic operations
Turning the display on or off
To turn on or off the display, press the power button on
the display’s control panel or on the remote control.
• The display’s standby mode still consumes power. To completely cut off power supply,
disconnect the power cord from the power outlet.
• The display follows the VESA approved DPM Power Management function. The power
management function is an energy saving feature that automatically reduces the
display’s power consumption when the keyboard or the mouse has not been used for a
fixed period.
Locking/unlocking the controls
You can lock/unlock the control panel to prevent unwanted or accidental
operations.
• Control panel buttons
To lock/unlock the control panel buttons, press and hold  and  simultaneously
for 5 seconds. Once locked, the control panel buttons do not function unless
unlocked.
• Remote control functions
To lock/unlock the remote control functions, press and hold MENU and  for 5
seconds. Once locked, the display does not respond to any remote control
operations unless unlocked.
Switching input signals
Press the INPUT button or those signal selection buttons on the remote control or
the INPUT button on the control panel to select an input signal.
Adjusting audio volume level
Press / on the control panel or VOL+/VOL- on the remote control to adjust
the volume.
Network connection
27
Network connection
Connecting to a LAN
To set the display to connect to a local area network:
1. Connect a RJ45 cable to the corresponding ports on the display and your LAN
switch or router.
2. Enter the OSD menu Setting > Control Setting. Select LAN.
3. Enter the next OSD menu Setting > Network Settings.
If you are in a DHCP environment, select DHCP > Execute and press
ENTER. Once done, the IP Address, Subnet mask, Default gateway,
Primary DNS, and Secondary DNS settings will be displayed.
If you are not in a DHCP environment, select Manual > Execute and press
ENTER. Contact your ITS administrator for information on the IP Address,
Subnet mask, Default gateway, Primary DNS, and Secondary DNS
settings and enter it accordingly.
4. To save the settings and return to the previous menu, highlight Execute and
press ENTER on the remote control.
Controlling the display
Once you have the correct IP address for your display and the display is on or in
standby mode, you can use any computer that is on the same local area network
to control the display.
• You cannot control the display via the RS-232C connector when LAN control is in use.
• It is recommended that you use Internet Explorer versions 7.0 or higher browser.
1. Enter the IP address of the display in the address bar of your browser and
press Enter.
2. The setting page appears.
• Information: Shows information of the display. It is for information only. There
are no items that can be set.
• Picture & Sound: Provides options for picture and sound adjustments.
• Screen: Provides options related to display adjustments.
• Setting: Provides options for advanced display adjustments.
• Mail Report: Provides options for setting up email accounts to receive status or
error reports sent from the display.
• Network: Provides options for manually setting the display’s IP address or
obtaining an IP address from a DHCP server. Provides options for setting or
changing the user name and password to secure this network control system.
Make sure the Setting > Control Setting menu is set to LAN if you would like to turn on
the display from a web page.
28
The OSD (On-Screen Display) menu
The OSD (On-Screen Display) menu
OSD menu overview
Menu name
Options/functions
See
page
• Picture Mode
• Backlight
• Contrast
• Brightness
• Chroma
Picture
• Phase
31
• Sharpness
• Color Temp.
• Noise Reduction
• Film Mode
• Reset
• Sound Mode
• Treble
• Bass
Sound
• Balance
• Surround
32
• Speaker
• Audio Source
• Reset
• PAP Setting
• Display Wall
Screen
• Aspect
• Adjust Screen
• Freeze
33
The OSD (On-Screen Display) menu
• Language
• Schedule
• Power Save
• Control Setting
Setting
• Network Settings
• Set Monitor ID
36
• HDMI Control
• Advanced
• Information
• All Reset
Some options are only available when a certain input signal source is selected.
29
30
The OSD (On-Screen Display) menu
Operations in the OSD menu
Using the control panel buttons
1. Press MENU to open the OSD
menu.
Using the remote control
1. Press MENU to open the OSD
menu.
ENTER
VIDEO
SOURCE
2. In the OSD menu, press  or  to
select an item.
2. Press  or  to select an item.
ENTER
VIDEO
SOURCE
3. Press ENTER/VIDEO SOURCE to
confirm selections.
3. Press ENTER to confirm selections.
ENTER
TER
VIDEO
SOURCE
4. Press  or  to select a feature
and press  or  to adjust settings.
Press ENTER/VIDEO SOURCE to
save changes.
4. Press  and  to select a feature
and press  or  to adjust settings.
Press ENTER to confirm changes.
ENTER
TER
VIDEO
SOURCE
5. Press MENU to close the OSD
menu.
ENTER
VIDEO
SOURCE
5. Press MENU to close the OSD
menu.
The OSD (On-Screen Display) menu
31
Picture menu
Picture
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Noise Reduction
Film Mode
Reset
:Move
Name
Picture Mode
Backlight
Standard
100
50
50
25
25
10
Cool
Mid
Auto
ENTER :Enter
EXIT :Exit
Description
Sets the display mode.
Adjusts the backlight intensity for the screen.
This feature is not available if the Ambient Light Sensor or AC function is set
to On.
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Noise
Reduction
Film Mode
Adjusts the image contrast.
Adjusts the image brightness.
Adjusts the color intensity of the image.
Adjusts the color tint of the image.
Adjusts the image sharpness.
Adjusts the color temperature.
Reduces electrical image noise caused by different media players.
Optimizes the screen display automatically by detecting picture
content and applying a reverse 3-2 or 2-2 pull-down process. The
picture will be clearer and more natural.
• This function is not available when displaying Picture and Picture (PAP).
• This function may not be correctly processed depending on the input signal.
Reset
Resets all settings in the Picture menu.
32
The OSD (On-Screen Display) menu
Sound menu
Sound
Sound Mode
Treble
Bass
Balance
Surround
Speaker
Audio Source
Reset
:Move
Standard
0
0
Center
Off
Internal
Audio-in
ENTER :Enter
Name
EXIT :Exit
Description
Sound Mode Adjusts the sound output from the speakers.
Dynamic: Enhances treble and bass.
Standard: Flat settings.
Custom: Recalls the customized settings.
Treble
Adjusts the audio treble.
Bass
Adjusts the audio bass.
Balance
Adjusts the audio balance.
Surround
Turns the surround mode on or off.
Speaker
Sets the audio source.
Line-Out: Selects the audio output source from AUDIO OUT (R/L) on
the rear connector panel.
External: Selects the audio output source from SPEAKERS (R/L) on
the rear connector panel.
Internal: Select the audio output source from the internal speakers.
Audio
Sets the audio input source.
Source
DisplayPort
Reset
HDMI 1
HDMI 2
Resets all settings in the Sound menu.
Audio 1 Audio 2
SDI
The OSD (On-Screen Display) menu
33
Screen menu
Screen
PAP Setting
Display Wall
Aspect
Adjust Screen
Freeze
:Move
Name
PAP Setting
(Picture and
Picture)
Full
Off
ENTER :Enter
EXIT :Exit
Description
• PAP: Turns on or off the PIP (Picture in Picture) and PBP (Picture
by Picture) functions.
• Active Picture: For the PIP, selects the main or sub picture to
operate. For the PBP, selects the left or right picture to operate.
Swaps the main/ sub or left/right pictures.
• Picture Size: (PIP only) Changes the size of the sub picture.
• Picture Position: (PIP only) Changes the position of the sub
picture.
• This feature is not available for Video and S-Video inputs.
• PAP is not available for all signal source combinations. See "Supported PAP
input signal combination" on page 44 for more information on supported
combinations.
• In PAP mode, only sound from the active picture will be available.
Display Wall
• H. Monitors/V. Monitors: Sets the number of displays used in the
horizontal/vertical direction.
• H. Position/V. Position: Sets the horizontal/vertical position of the
display wall matrix.
• Frame Comp.: Adjusts images near the display edges for optimal
demonstration across the display wall.
• LED: Turns the power indicator on the display on or off.
• Power On Delay: Choose to enable or disable a sequence in
turning on the screen matrix. If enabled, the display will turn on one
horizontal matrix starting from the top row.
34
The OSD (On-Screen Display) menu
Aspect
Sets the picture’s aspect ratio.
• Wide Zoom: Enlarges to fill screen with minimum distortion.
• Zoom: Enlarges the picture, keeping the same aspect ratio.
• Full: Enlarges the picture horizontally to fill the screen when the
picture source is 4:3 (Standard definition). When the picture source
is 16:9 (High definition), it displays in the same 16:9 aspect ratio.
• 4:3: Displays all picture source in 4:3 aspect ratio.
• Full 1: Enlarges the picture to fill the screen in the vertical
direction, keeping the same aspect ratio. A black frame may
appear around the picture.
• Full 2: Enlarges the picture to fill the screen.
• Real: Displays the picture in its original number of dots.
For video signal inputs
4:3 original source
16:9 Original source
Wide Zoom
Wide Zoom
Zoom
Zoom
Full
Full
4:3
4:3
The OSD (On-Screen Display) menu
Aspect
(continued)
Adjust Screen
For PC signal input
Real
Full 1
35
Full 2
• Auto Adjustment: Sets whether to optimize image display for
each VGA input.
• Phase: Adjusts the phase of the VGA input image.
• Clock Frequency: Adjusts the clock frequency of the VGA input
image.
• H. Position: Adjusts the horizontal position of the VGA input
image.
Freeze
• V. Position: Adjusts the vertical position of the VGA input image.
Freezes the displayed image.
36
The OSD (On-Screen Display) menu
Setting menu
Setting
Language
Schedule
Power Save
Control Setting
Network Settings
Set Monitor ID
HDMI Control
Advanced
Information
All Reset
:Move
Name
Language
Schedule
ENTER :Enter
English
High
RS-232C
01
Off
EXIT :Exit
Description
Sets your preferred language for the OSD menu.
• Date and Time: Sets the current date and time.
• Clock Display: Sets whether to show the current time which was set.
• On/Off Timer: Sets when to turn on or off the display.
• Set the current time before you set the On/Off Timer.
• When schedule settings overlap, the Everyday setting takes priority over other
weekly settings.
Power
Save
Sets the display to enter the power saving mode when there is no signal
detected.
• Low: All source can enter the power saving mode and wake up the
display.
• High: All source can enter the power saving mode, but only a VGA
signal can wake up the display or you have to press the power button to
wake up the display when other source is connected.
• Off: If no source is detected, the backlight will continue on.
• Serial can bring any mode out of the power saving status.
• LAN can bring Low mode out of the power saving status.
The OSD (On-Screen Display) menu
Control
Setting
37
• RS-232C/LAN: Sets a terminal to control the display.
• IR Passthrough: Select it when multiple displays are connected via
RS-232C cables.
- Primary: Designate the display as the primary unit for remote
control operation. Only this display will be operated by the remote
control.
- Secondary: Designate the display as the secondary unit. The
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS-232
connection.
See "Network connection" on page 27 for details.
Network
Settings
Set Monitor Assigns an ID number for the current display when multiple displays are
ID
connected.
For use when under the RS-232C control mode.
HDMI
Control
Uses the HDMI CEC (Consumer Electronics Control) industry standard
protocol to share functionality between connected devices and the
display. To transfer system commands, you need to use an HDMI cable
to connect the display to a device equipped with HDMI CEC. Select On in
this menu and you can operate the main functionalities on your display
and the connected device with one remote control.
38
The OSD (On-Screen Display) menu
Advanced
• Auto Search: Automatically detects available input sources.
• Auto Adjustment: Automatically optimizes image display for the VGA
input.
• Overscan: Turns the overscan function on or off.
• RGB Signal: Sets the type of signal for a piece of video equipment or
PC connected to the HDMI of the display
• Anti-Burn-In: Turns Anti-Burn-In function on or off. When turned on,
you can select a mode to perform and a time interval to activate the
function.
- Mode A (ps: frame): Executes fast.
- Mode B (ps: line): Slower but more precise than mode A.
- Mode C (ps: dot): Slowest but the most precise mode.
• OSD Rotation: Adjusts the OSD rotation.
See product specifications for models recommended for portrait orientation.
Landscape only models operated in portrait mode may result in premature failure
and will not be covered under the warranty.
• OSD Info Box: When turned On, switching signal inputs, or changing
timing, the display will show the current input source and resolution
onscreen. Select Off to show the information box onscreen only when
you press INFO on the remote control.
• AC: Turns the AC function on or off. This feature enhances image
contrast for dark scenes.
This feature is not available if the Ambient Light Sensor function is set to On.
• Ambient Light Sensor: When turned On, the image brightness will
adjust automatically as the ambient lighting conditions change.
Information Displays the following information of your display.
• Date
• Model Name
• Serial Number
• Operating Time
• Software Version
• LAN Version
All Reset
• IP Address
Returns all settings to factory default values.
Product information
39
Product information
Specifications
Item
Active area (H x V mm)
Pixel pitch (mm)
Native resolution
(pixels)
LCD panel
Brightness (cd/m2)
(typical)
Contrast (typical)
Adaptive contrast
Response time (ms)
(typical)
Computer
Video
Input
Audio
Control
Computer
Video
Output
Speaker
Audio
Control
SDI
Supply
Consumption Max.
Consumption Standby
Operating Temperature
Operating Humidity
Environment Storage Temperature
Storage Humidity
Display Orientation
Power
Weight (lbs/kg)
Mechanical
Dimensions
(W x H x D) (inch/mm)
Specifications
HX-32
HX-42
698.4 x 392.85
0.3637 x 0.3637
927.94 x 521.96
0.4833 x 0.4833
1920 x 1080
500
400
3000:1
40000:1
1000:1
33500:1
8
9
VGA (D-Sub 15-pin)
DVI (DVI-D), Composite Video (BNC jack), S-Video,
YPbPr (RCA jacks), HDMI x 2, DisplayPort, SDI
(BNC)
L/R (RCA jacks), Line-in (3.5 mm jack)
RS-232 (D-Sub 9-pin),
RJ45 (Jack RJ45 W/LED I)
VGA (D-Sub 15-pin)
DVI (DVI-D), Composite Video (BNC jack), SDI
(BNC)
External speaker jack
External speaker jack
(10W+10W, 8 Ohms)
(12W+12W, 8 Ohms)
L/R (RCA jacks)
RS-232 (D-Sub 9-pin)
3G-SDI (SMPTE 424M) 1080p @50/60fps
720p @24/25/30/50/60fps
HD-SDI (SMPTE 292M) 1080p @24/25/30fps
1080i @50/60fps
SD-SDI (SMPTE 259M) 525i (NTSC)/ 625i (PAL)
100 - 240V AC, 50/60 Hz
< 115 W
< 150 W
< 0.5 W
0 - 40oC, 32 - 104oF
10 - 90% (without condensation)
-20 - 60oC, 4 - 140oF
10 - 90% (without condensation)
Landscape/Portrait
36.38/15.2
55.66/25.7 (Approximately)
(Approximately)
29.8 x 17.8 x 2.73/
756.6 x 451.1 x 94.8
38.6 x 22.6 x 4.8/
980 x 574 x 124.8
Specifications and functions are subject to change without notice.
40
Product information
Dimensions
• HX-32
451.1
756.6
94.8
Unit: mm
41
Product information
• HX-42
194.3
980
932
194.3
526
574
124.8
67
433
569.8
Unit: mm
42
Product information
Supported input signal resolution
Input source
Resolution
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
720 x 400 @ 70Hz
800 x 600 @ 60Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 75Hz
1280 x 768 @ 60Hz
1280 x 800 @ 60Hz RB
1280 x 800 @ 60Hz
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1360 x 768 @ 60Hz
1366 x 768 @ 60Hz
1400 x 1050 @ 60Hz
1600 x 1200 @ 60Hz
1680 x 1050 @ 60Hz
RB
1600 x 1050 @ 60Hz
1920 x 1080 @ 60Hz
NTSC-M
NTSC-J
PAL-BDGHI
480i (60Hz)
480p (60Hz)
525i (NTSC)
576i (50Hz)
576p (50Hz)
625i (PAL)
720p (25Hz)
AV
S-Video YPbPr VGA
HDMI
DVI
Display
Port
SDI
Product information
43
Input source
Resolution
AV
720p (30Hz)
720p (50Hz)
720p (60Hz)
1080i (50Hz)
1080i (60Hz)
1080p (24Hz)
1080p (25Hz)
1080p (30Hz)
1080p (50Hz)
1080p (60Hz)
•
: supported
• Blank: not supported
S-Video YPbPr VGA
HDMI
DVI
Display
Port
SDI
44
Product information
Supported PAP input signal combination
Main/Left picture signal source
AV
AV
S-Video
Sub/
Right
picture
signal
source
YPbPr
VGA
DVI
HDMI
SDI
Display
Port
S-Video YPbPr
VGA
DVI
HDMI
SDI
Display
Port
Troubleshooting
Troubleshooting
Problem
No picture
Solution
Check the following:
• Is the display turned on? Check the power indicator
of the display.
• Is the signal source device turned on? Turn on the
device and try again.
• Are there any loose cable connections? Make sure
that all cables are connected firmly.
• Have you chosen an unsupported output resolution
on the computer? Refer to "Supported input signal
resolution" on page 42 to select a supported
resolution and try again.
No sound
• Have you chosen an unsupported output resolution
on the DVD or Blu-ray disc player? Refer to
"Supported input signal resolution" on page 42 to
select a supported resolution and try again.
Check the following:
• Have you turned on the mute function on the display
or the input source device? Turn off the mute function
or increase the audio volume level and try again.
The computer input
image looks strange
• Are there any loose cable connections? Make sure
that all cables are connected firmly.
• Have you chosen an unsupported output resolution
on the computer? Refer to "Supported input signal
resolution" on page 42 to select a supported
resolution and try again.
• Use the Auto Adjustment function (Refer to "Adjust
Screen" on page 35) to let the display automatically
optimize the display of computer image.
The control panel
buttons do not work
• If the result of the Auto Adjustment function is not
satisfactory, use the Clock Frequency, Phase, H.
Position and V. Position functions to manually
adjust the image.
Have you locked the control panel buttons? Unlock the
buttons and try again.
45
46
Troubleshooting
The remote control
does not work
• Have you locked the remote control function? Unlock
the function and try again.
• Check for incorrect battery orientation.
• Check for dead batteries.
• Check your distance and angle from the display.
• Check whether remote control is properly being
pointed at the display’s remote control sensor
window.
• Check for any obstacle between the remote control
and the remote control sensor window.
• Check that the remote control sensor window is not
under strong fluorescent lighting, or in direct sunlight.
• Check for any devices (computer or personal digital
assistant, PDA) nearby that transmit infrared signals
which may cause interference to signal transmission
between the remote control and the display. Turn off
the infrared function of these devices.
Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising