To be Discon VB SERIES 2 POLE—5 A POWER RELAY
POWER RELAY
2 POLE—5 A (MEDIUM LOAD CONTROL)
VB SERIES
RoHS compliant
n FEATURES
UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated
l
Working class: C
l
UL class B (130°C) insulation
l
Type of service: continuous duty
l
Heavy duty miniature slim type power relay
l
High isolation in small package
—Insulation distance: 8 mm
—Dielectric strength: 5,000 VAC (between coil and contacts)
—Surge strength: 10,000 V
l
Standard and high sensitivity types available
l
Flux free type and plastic sealed type available
l
Lead Free since date code: 0438B9, 0434R - Please see
page 8 for more information
l
To
be
Di
n ORDERING INFORMATION
[Example]
sc
VB – 12 S M B U – 5
(a) (*) (b) (c) (d) (e) (f) (*) (g)
on
ti
(a)
Series Name
VB:VB Series
(b)
Nominal Voltage
Refer to the COIL DATA CHART
(c)
Coil Type
Nil: Standard type (700-750 mW)
S : High sensitive type (530 mW)
(d)
Contact Arrangement
M : 2 form A (DPST-NO)
T : 2 form C (DPDT)
(e)
Enclosure
B : Flux free type
C : Plastic sealed type (with tape)
K : Plastic sealed type
(f)
Standard
Nil: TV-rating
U : General (non TV-rating)
(g)
Contact Material
N :
Nil:
5 :
Nil:
E :
nu
ed
Silver alloy
Silver cadmium oxide (TV-3 rating)
Silver cadmium oxide (non TV-rating)
Gold overlay silver-nickel (non TV-rating)
Silver-nickel (non TV-rating)
Actual marking omits the hyphen (–) of (*)
1
VB SERIES
n COIL DATA CHART
TV-3 RatingStandardNominal Coil resistanceMust operate Must releaseNominal
voltage
(10%)
voltage
5A
voltage
power
VB- 3M( )
VB- 3 ( ) ( ) U-( )
3 V DC
12.5 Ω
2.1 VDC
0.3 VDC
0.72 W
VB- 5M( )
VB- 5( ) ( ) U-( )
5 V DC
36 Ω
3.5 VDC
0.5 VDC
0.70 W
VB- 6M( )
VB- 6( ) ( ) U-( )
6 V DC
50 Ω
4.2 VDC
0.6 VDC
0.72 W
VB- 9M( )
VB- 9( ) ( ) U-( )
9 V DC
115 Ω
6.3 VDC
0.9 VDC
0.70 W
VB- 12M( )
VB- 12( ) ( ) U-( )
12 V DC
200 Ω
8.4 VDC
1.2 VDC
0.72 W
VB- 14M( )
VB- 14( ) ( ) U-( )
14 V DC
280 Ω
9.8 VDC
1.4 VDC
0.70 W
VB- 18( ) ( ) U-( )
18 V DC
460 Ω
12.6 VDC
1.8 VDC
0.70 W
VB- 24( ) ( ) U-( )
24 V DC
820 Ω
16.8 VDC
2.4 VDC
0.70 W
VB- 36( ) ( ) U-( )
Di
36 V DC
1,850 Ω
25.2 VDC
3.6 VDC
0.70 W
VB- 48( ) ( ) U-( )
48 V DC
3,300 Ω
33.6 VDC
4.8 VDC
0.70 W
VB- 60( ) ( ) U-( )
60 V DC
5,100 Ω
42.0 VDC
6.0 VDC
0.70 W
100 V DC
13,400 Ω
70.0 VDC
10.0 VDC
0.75 W
3 V DC
17 Ω
2.1 VDC
0.3 VDC
0.53 W
47 Ω
3.5 VDC
0.5 VDC
0.53 W
6 V DC
68 Ω
4.2 VDC
0.6 VDC
0.53 W
155 Ω
6.3 VDC
0.9 VDC
0.53 W
8.4 VDC
1.2 VDC
0.53 W
9.8 VDC
1.4 VDC
0.53 W
12.6 VDC
1.8 VDC
0.53 W
16.8 VDC
2.4 VDC
0.53 W
25.2 VDC
3.6 VDC
0.53 W
Standard Type
To
VB- 18M( )
VB- 24M( )
VB- 36M( )
be
VB- 48M( )
VB- 60M( )
VB-100M( )
VB- 3S( ) ( ) U-( )
VB- 5S( ) ( ) U-( )
VB- 6S( ) ( ) U-( )
VB- 9S( ) ( ) U-( )
VB-12S( ) ( ) U-( )
12 V DC
VB-14S( ) ( ) U-( )
14 V DC
VB-18S( ) ( ) U-( )
18 V DC
VB-24S( ) ( ) U-( )
24 V DC
1,100 Ω
VB-36S( ) ( ) U-( )
36 V DC
2,450 Ω
VB-48S( ) ( ) U-( )
48 V DC
4,400 Ω
33.6 VDC
4.8 VDC
0.53 W
VB-60S( ) ( ) U-( )
60 V DC
6,800 Ω
42.0 VDC
6.0 VDC
0.53 W
VB-100S( ) ( ) U-( )
100 V DC
18,860 Ω
70.0 VDC
10.0 VDC
0.53 W
High Sensitivity Type
VB-100( ) ( ) U-( )
sc
5 V DC
9 V DC
Note: All values in the table are measured at 20 °C.
on
270 Ω
370 Ω
610 Ω
ti
nu
ed
VB SERIES
n SPECIFICATIONS
TV-3 Rating
Item
Standard Type
VB-( ) M VB-( ) M-N VB-( ) U-5 VB-( ) U-N
Contact
Arrangement
2 form A (DPST-NO)
VB-( ) U
VB-( )-E
2 form A (DPST-NO) or 2 form C (DPDT)
Silver-alloy Gold overlay
Silver-alloy SilverSilver
Material
cadmium
cadmium
silver-nickel
oxide
oxide
(non gold overlay
only VB-E)
To
Style
Single
Resistance (initial) (at 1 A 6 VDC)
Maximum 100 mΩ
Rating (resistive)
5 A 240 VAC/24 VDC
Maximum Carrying Current
7A
Maximum Switching Power
1,200 VA, 120 W
Maximum Switching Voltage
250 VAC, 150 VDC
Maximum Switching Current
be
Di
1
sc
5A
100 mA 5 VDC (VB-M, 5, E) 10 mA 5 VDC (VB-)
Minimum Switching Load *
Maximum Inrush Current
Coil
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
Time Value
Operate (at nominal voltage)
Maximum 15 ms
Release (at nominal voltage)
Maximum 10 ms
Life
Mechanical
2 × 107 operations minimum
Electrical
1 × 105 operations minimum at rated load
Vibration
Resistance
Shock
Resistance
Weight
on
Standard type: 700 to 750mW, high sensitivity type: 530mW
Standard type: 350 to 370mW, high sensitivity type: 260mW
ti
Standard type: –40°C to +65°C, high sensitivity type: –40°C to +75°C (no frost)
nu
ed
3 × 104 operations minimum
5 × 104 operations
minimum at motor load at motor load
(1/8HP 120 VAC)
(1/8HP 120 VAC)
Other
51 A 120 VAC (at lamp load) —
104
5×
operations
—
minimum at lamp load
Misoperation
10 to 55 Hz (double amplitude of 1.5 mm)
Endurance
10 to 55 Hz (double amplitude of 1.5 mm)
Misoperation
100 m/s2 (11 ± 1 ms)
Endurance
1,000 m/s2 (6 ± 1 ms)
Approximately 17 g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load
before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
*2 IMQ 2
*3 IMQ 0
VB SERIES
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508, 873
E56140
Flammability: UL 94-V0 (plastics)
TV-rating
5A, 240VAC/24VDC (resistive)
1/6 HP, 240VAC/120VAC
Pilot duty: C150
TV-3 120VAC
CSA
To
VDE
C22.2 No. 14
LR 35579
be
5A, 240VAC/24VDC (resistive)
1/6 HP, 240VAC/120VAC
Pilot duty: C150
0435, 0631, 0700, 0860
Complies with SEV, SEMKO, CQC, VDE
n
INSULATION
Item
Resistance (initial)
Dielectric
Strength
open contacts
Di
coil and contacts
Surge Voltage (coil and contact)
sc
Note
Minimum 1,000 MΩ
on
at 500 VDC
1,000 VAC (50/60 Hz) 1 min.
5,000 VAC 1 min., (3,000 VAC 1 min.
adjacent contacts)
ti
10,000 V (6,000V adjacent contacts)
n CHARACTERISTIC DATA
1.2 x 50µs standard wave
nu
ed
VB SERIES
To
be
n REFERENCE DATA
Di
sc
on
ti
nu
ed
VB SERIES
n DIMENSIONS
l Dimensions
l Schematics
(BOTTOM VIEW)
VB-M type
l PC board mounting
hole layout
(BOTTOM VIEW)
To
VB type
be
VB-MK type (Plastic sealed type)
Di
sc
on
ti
nu
ed
VB-K type (Plastic sealed type)
Unit: mm
VB SERIES
VB-MC type (Plastic sealed type with tape)
To
be
VB-C type (Plastic sealed type with tape)
Di
sc
on
Unit: mm
ti
nu
ed
VB SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
To
be
Di
2. Recommended Lead Free Solder Profile
l
sc
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at 260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
on
ti
nu
ed
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
VB SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
To
be
Di
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
sc
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. June 30, 2009.
on
ti
nu
ed
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising