67580 Adult assembly required. Parts List: Please read the following instructions and warnings carefully. Keep this instruction manual for future reference. For support call 1-800-268-6237 or contact us at BOLT (#1) LOWER ARM (#2) ADJUSTER NUT (#3) LARGE CLAMP NUT (#4) COUPLING (#5) UPPER ARM (#6) MUSIC UNIT (#7) CROSS ARM TOP (#8) CROSS ARM BOTTOM (#9) www.summerinfant.com/contact Keep small parts away from children. Styles and colors may vary. From birth to 5 months INSTRUCTION MANUAL Mobile Your baby will sleep tight and safe with the Jungle Buddies Nursery Collection. He will drift asleep listening to soft lullabies with the Crib Mobile. MOBILE TOYS (#10) WARNING: We LOVE our consumers! Get to know us at: www.summerinfant.com Summer Infant stands behind all of its products. If you are not completely satisfied or have any questions, please contact our Consumer Relations Team at 1-800-268-6237 or www.summerinfant.com/contact (For Europe call +44 (0)144 250 5000 or email@example.com) connect with us: Summer Infant, Inc. 1275 Park East Drive Woonsocket, RI 02895 USA 1-800-268-6237 ©2012 Summer Infant, Inc. MADE IN CHINA. Summer Infant Europe, LTD. 1st Floor North Wing, Focus 31 Cleveland Road Hemel Hempstead Hertfordshire, HP2 7BW 0144 250 5000 09/12 Possible entanglement injury. Keep out of baby’s reach. Remove mobile from crib or playpen when baby begins to push up on hands and knees. ASSEMBLY INSTRUCTIONS: • A crib mobile is intended for visual stimulation and is not intended to be grasped by the child. • If so designed, mount on a wall or ceiling clearly out of a standing baby’s reach. • Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently. • Do not add additional strings or straps to attach to a crib or playpen. Setting Up The Mobile: 1 Setting Up The Mobile (Cont.): 7 2 STEP 7: Press Upper Arm (#6) firmly into coupling. STEP 1: Insert Bolt (#1) into hole in Lower Arm (#2) as shown. 3 5 STEP 5: Turning clockwise, firmly tighten Large Clamp Nut (#4) to the crib rail. STEP 8: Insert hook on top of Music Unit (#7) into hole at top of Upper Arm to hang as shown. STEP 2: Rotate Bolt clockwise until Bolt stops to lock into place. 9 4 MATTRESS STEP 3: Screw Adjuster Nut (#3) onto Bolt as shown. Adjuster Nut should rest against flat surface on Lower Arm as shown. 8 10 STEP 9: Snap Cross Arm Top (#8) onto Cross Arm Bottom (#9) as shown. STEP 10: Insert hook on top of Cross Arms into hole at bottom of Music Unit to hang as shown. 11 12 STEP 11: Tie small knots at the end of fabric hanging from Mobile Toys (#10). STEP 12: Insert fabric with knot into clips at each end of cross arm assembly. STEP 4: Place Lower Arm assembly on crib rail as shown. Please read warning listed below. 6 STEP 6: Press Coupling (#5) firmly onto Lower Arm.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project