Siemens - SPC Control Panel, 8-512 Zones, Ethernet, G3 Metal Housing

Siemens - SPC Control Panel, 8-512 Zones, Ethernet, G3 Metal Housing
Intrunet™ SPC Control Panel
SPC6000
V3.1
Perfect building protection inside and outside

















Answers for infrastructure.
Cost effective integration of Intrusion and Access functionality
Investment protection with modular system design
Individual management of up to 512 users
System partitioning with up to 60 areas
Efficient audio / video alarm verification with 16 verification zones
Reliable monitoring of up to 512 zones
Flexible control of up to 512 free programmable outputs
Powerful management of up to 64 doors (64 readers)
Large event log for up to 10,000 intrusion / 10,000 access events
Full connectivity with tri-path communications (PSTN, GSM, integral IP)
Instant control and safe operation over on-board Web Server
User friendly interfaces with innovative voice annunciation support
Intuitive configuration facilities
Cost saving automated remote servicing and site administration
Reliable high-speed expander bus (X-BUS) with loop topology
Customised processes with advanced functions set
Seamless integration of Intrunet wireless detectors
Functionalities
 Cost effective integration of intrusion
and access functionality
The SPC6000 combines intrusion and access
functionality in the same controller for a cost
effective solution of intrusion protection and
people management in a commercial building.
The powerful and future oriented controller
architecture (ARM processor) also offers high
performance in connectivity, system features
and Expander bus (X-BUS).
 Investment protection with modular
system design
The modular system design allows the use of
common SPC-series modules and expanders
across the whole system family. This
facilitates the planning efforts for the various
application sizes and allows the system to
grow with the customer requirements.
 System partitioning with up to 60 areas
and up to 512 users
The SPC panel can be partitioned into 60
independent areas to support multi-area
applications. Up to 512 users can be
individually configured with user rights for
access and intrusion functionality.
 Efficient audio / video alarm verification
with 16 verification zones
Up to 4 IP cameras and 16 audio devices
(audio expanders or keypads with audio) can
be combined to create up to 16 verification
zones. The captured pre-, post- and live event
audio streams and video images are
transmitted over IP to the ARC/CMS to allow
superb true alarm rate and short decision
times on alarms.
 Reliable monitoring and flexible control
of up to 512 zones and 512 outputs
A total of up to 512 zones and 128 outputs
can be programmed as needed by ticking
specific attributes for the chosen function.
This allows individual detection, control and
event notification at numerous points
throughout a larger building. Up to 10,000
intrusion events and 10,000 access events
across all areas can be stored in the controller
log book.
 Powerful management of up to
64 doors (64 readers) in 32 door groups
The connected card readers allow an easy
entry or exit with card and/or PIN through up
to 64 entry doors or 32 entry / exit doors,
combined with automatic setting and
unsetting of areas depending on the individual
user rights. The doors can be enabled with a
choice of access functions such as anti-pass
back, custodian or escort.
 Instant control and safe operation over
on-board Web Server
The on-board Web server enables users or
engineers to log on remotely from any PC
Web browser and check the system and zones
status, as well as logs and perform certain
programming operations, such as area setting
or unsetting.
2
 User friendly interfaces with innovative
voice annunciation support
The SPC keypads provide an easy interface to
locally control SPC systems. The 32-character
standard keypads with clear text display
provide a modern and functionally advanced
user interface for all type of standard
applications.
The comfort keypad with its large LCD
display and optional voice assistance
functionality is ideal to easy operate all kind
of applications, from simple single area
systems up to complex multi area systems.
The indication expander offers a flexible
programmable user interface to indicate any
status information on LEDs (e.g. open zones,
area setting states) and to activate processes
(e.g. setting of area, open garage door). It’s
integrated card/tag reader can be used to
unlock indicators or keys.
The key switch expander enables the
activation of user specific functions (e.g.
setting area, temporary zone bypass, activate
output) and indicates status information on
LEDs (e.g. area setting state, key switch
position, open zone).
Functionalities
 Full connectivity with tri-path
communications (PSTN, GSM/GPRS,
integral IP for SPC63xx)
Central station connectivity is a major part of
the security system. The SPC panels support
PSTN and GSM communication with all the
major communication formats to standard
alarm receivers and IP communication
(Ethernet with GPRS backup) to SPC Com
alarm receiving software, prioritising of
communication channels based on a
predefined strategy.
SPC supports also full connectivity for the
engineer / user with secure authentication and
rights management, via IP
broadband / local area network (Ethernet),
GSM or PSTN networks.
SMS text messaging via GSM module
enhances the ability to notify events or alarms
to the user. Moreover the user can control the
panel via SMS commands via GSM.
 Cost saving automated remote servicing
and site administration
The optional SPCS320 Remote Maintenance
Server ensures a high service quality at
reduced costs. Without intervention of an
engineer the SPC panel periodically sends
automated technical system checks to a
server. The data can be auto-analysed and
printed; an ideal support for existing or new
service agreements with customers.
And the optional SPCS410 SPC Safe Server
reduces costs to administer a large installed
panel base. The central SPC Safe server
always contains up-to-date configuration files
and provides direct access for engineers and
panels to the common database.
Configuration files can be easily imported or
exported to the engineers PC, and with the
SPC63xx any configuration changes (e.g.
changed PIN) are automatically transmitted
over IP (Ethernet) to the server.
 Intuitive Configuration Facilities
The SPC panels provide easy and flexible
configuration facilities. Remote configuration
through any of the communication channels
by use of the on-board Web Server or a PC
with SPC Pro Programming Software
minimizes expensive on-site engineering
costs.
If off-site programming is not appropriate, the
PC web browser or SPC Pro can be used with
direct connection to the panel. Engineer
friendly menus with intuitive interface along
with system templates make the SPC panel
one of the quickest panels to program. In
addition, the SPC Fast Programmer can
simply be plugged on the SPC controller for
setup using pre-programmed configurations.
 Reliable high-speed Expander Bus (XBUS) with loop topology
The high-speed Expander Bus (X-BUS with
307 kB/s) is a fast and reliable backbone for
all system installations with up to 400 m
distance between each bus device. The loop
topology protects the system against possible
communication faults caused by an interrupt
or short circuit by isolating the faulty branch
in the loop.
3
 Seamless integration of Intrunet wireless
detectors and remote controls
Up to 120 Intrunet wireless detectors and 1
Intrunet remote control per user can be
addressed using the SiWay receivers as RF
access points throughout the system. The
wireless zones can be mixed and match with
wired zones for cost effective installation with
minimal wiring.
 Customized processes with advanced
functions set
With the advanced functions set, the SPC can
be adapted to customer specific processes.
The 64 individual calendar based time
channels with multiple on/off switching
patterns allow individual time control of users,
areas, inputs or outputs. The Cause & Effects
programming allows activation of outputs
based on freely definable trigger conditions
(combination of status change of zones,
system or area outputs, user PIN, Keypad
Quick Keys, calendars).
The integrated financial capability enables
you to easily configure and operate standard
banking functionality such as ATMs, vault
rooms, separation of people at entry, or
automatic seismic detector testing.
The Intrunet SPC panel range is designed to cope with the various project specific
needs regarding intrusion and access functionality, connectivity, application size or
security grade. Thanks to the modular and future oriented concept the system can grow
with increasing customer needs supporting a long product life cycle.
 SPC6330.320 control panel, 8-512 zones, Ethernet, G3 metal housing
The SPC6330.320 control panel combines in an optimal way intrusion and access functionality
in one system and can be expanded according to specific customers and project needs with up to
512 zones (8 on-board), 512 outputs (6 on-board), 32 system keypads, 64 doors, 16 verification
zones.
The controller provides 2 X-BUS ports (2 stubs or 1 loop), 60 areas, 512 users with different
access levels, memory for 10’000 intrusion and 10'000 access events, integrated Web Server, 2
terminals for the pluggable PSTN and GSM communication options, on-board Ethernet
interface.
The system is expandable with wireless receivers and supports up to 120 Intrunet wireless
detectors (mixed with wired zones) and 1 remote control per user. The panel comes in a tamper
protected and hinged metal housing with space for optional 17 Ah battery and 4 additional
expanders.
4
X-BUS
The standard keypad is an iconic 32-character text keypad that is also modern,
aesthetically pleasing and functionally advanced. Support of proximity cards in the
various user interfaces rounds off perfectly the safe and easy operating concept.
 SPCK420.100 LCD-Keypad, 2x16 Characters
The SPCK420.100 LCD keypad provides the user with an iconic interface to control the security
system. It’s 32 character, blue, backlight display and keyboard allows user control under all
lighting conditions.
Navigation of the intuitive menu system is achieved using the central navigation key. The
keypad features soft keys and alphanumeric keys that allow contextual key operation and data
input directly from the keypad.
 SPCK421.100 LCD-Keypad, 2x16 Characters, with Card Reader
The SPCK421.100 LCD keypad with integrated card reader provides the user with an iconic
interface to control the security system. It’s 32 character, blue, backlight display and keyboard
allows user control under all lighting conditions.
Navigation of the intuitive menu system is achieved using the central navigation key. The
keypad features soft keys and alphanumeric keys that allow contextual key operation and data
input directly from the keypad.
The card reader enables quick setting / unsetting of areas uisng a proximity card only or in
combination with a valid user PIN.
 Compatible cards and tags
These EM4102 compatible cards are compatible to the devices with integrated card reader
(SPCK421, SPCK623, SPCE120).
IB42-EM
IB44-EM
EM laminated card without print
Key Tag
5
X-BUS
The innovative comfort keypad with its large display is ideal to easily manage multiple
and single areas, and in addition, the integrated voice annunciation helps to avoid
errors in the day to day operation of the system.
 SPCK620.100 Comfort Keypad
The SPCK620.100 comfort keypad is ideal for operating single area and multi-area applications
in a user friendly way.
The 4 soft keys and multi-dimensional navigation key allow ease of use with a minimum of
operational steps.
Status information and ‘next step’ prompts are clearly displayed on the large LCD. Customer
logo, emergency or quick set functions can be displayed in idle state.
The functionality can be enhanced with the SPCE110 key switch expander or SPCE120
indication expander.
 SPCK623.100 Comfort Keypad with Audio and Card Reader
The SPCK623.100 comfort keypad is ideal for operating single area and multi-area applications
in a user friendly way.
The 4 soft keys and multi dimensional navigation key allow a allow ease of use with a minimum
of operational steps.
Status information and and ‘next step’ prompts are clearly displayed on the large LCD.
Customer logo, emergency or quick set functions can be displayed in idle state.
The integrated card reader enables quick setting / unsetting of areas using a proximity card only
or in combination with a valid user PIN.
The built-in speaker and sensitive microphone support audio features such as alarm verification
and voice annunciation. The functionality can be enhanced with the SPCE110 key switch
expander or SPCE120 indication expander.
6
The indication or key switch expander offer application specific status information in
one glance and direct activation of functions in one operation step.
 SPCE110.100 Key Switch Expander
The SPCE110.100 is a universal key switch expander with 2 tri-color LEDs, a 3-position key
switch and buzzer.
The freely programmable user interface indicates the configured status information with LEDs
(e.g. key switch position, area setting states) and enables activation of application specific
processes by changing the key switch position (e.g. unlock keypad or indication expander,
setting of an area, open or close a gate).
The expander also provides one freely programmable volt free relay output with either NO or
NC terminal.
 SPCE120.100 Indication Expander with Card Reader
The SPCE120.100 is a universal display expander with 16 tri-color LEDs, 4 keys, integrated
card reader and buzzer.
In linked mode, with a keypad, the LEDs indicate the status of 4 areas at one glance and the
areas can be directly set or unset with the assigned function keys.
In flexible mode, the freely programmable user interface indicates the configured status
information with LEDs (e.g. open zones, area setting states) and enables activation of application
specific processes by pressing the assigned function keys (e.g. setting of an area, open or close a
gate).
With the integrated card reader the indication or operation can be enabled for authorised users
only by presenting a valid proximity card.
The expander also provides one freely programmable zone which can be configured for different
zone monitoring requirements.
7
X-BUS
All the SPC panels can be expanded up to their maximum number of zones or outputs
using the common system expanders on the X-BUS (expansion bus). The X-BUS bus
supports a maximum distance of 400 meters between each Expander. A complete
range of Expanders covers all the security requirements.
 SPCE650.100 Expander, 8 Inputs / 2 Outputs
The SPCE650.100 expander extends the SPC system via X-BUS with 8 wired zones and 2 fully
programmable relay outputs.
The zones and outputs on the expander function exactly as the zones and outputs on the SPC
panel. Each zone can be configured for different zone monitoring requirements.
The outputs are volt free relays that provide both NO and NC terminals allowing the greatest
flexibility.
The expander comes in a plastic housing with front tamper protection and also features an XBUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic
capabilities.
 SPCE652.100 Expander, 8 Inputs / 2 Outputs, with Back Tamper
The SPCE652.100 Expander incorporates the same features as the SPCE650.100 but with the
additional benefit of back tamper protection.
 SPCE450.100 Expander, 8 Relay-Outputs
The SPCE450.100 expander extends the SPC system via X-BUS with 8 fully programmable
relay outputs. The outputs are volt free relays that provide both NO and NC terminals allowing
the greatest flexibility.
The expander comes in a plastic housing with front tamper protection and features also an XBUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic
capabilities..
 SPCE452.100 Expander, 8 Relay Outputs, with Back Tamper
The SPCE452.100 Expander incorporates the same features as the SPCE450.100 but with the
additional benefit of back tamper protection.
8
Each Expander provides built-in dual-isolators, a signal equalizer and a signal
amplifier for highest X-BUS signal reliability. In loop topology the X-BUS is split-up
into two independent spurs in case of a short circuit or interrupt, and no
X-BUS components are lost.
 SPCP332.300 Smart PSU (7 Ah) with 8 Input / 2 Output Expander
The SPCP332.300 smart power supply expander (PSU) extends the SPC system via X-BUS with
a monitored 12 VDC local power source for battery management and connected security devices
(e.g. expanders), 8 wired zones and 2 fully programmable relay outputs.
The PSU comes in a tamper protected metal housing with space for an optional 7 Ah battery.
 SPCP432.300 Smart PSU (7 Ah) with 2-Door Expander
The SPCP432.300 smart power supply expander (PSU) extends the SPC system via X-BUS with
a monitored 12 VDC local power source for battery management and connected security devices
(e.g. expanders) and advanced door control functionality for 2 entry doors or 1 entry/exit door.
The PSU comes in a tamper protected metal housing with space for an optional 7 Ah battery.
 SPCP333.300 Smart PSU (17 Ah) with 8 Input / 2 Output Expander
The SPCP333.300 smart power supply expander (PSU) extends the SPC system via X-BUS with
a monitored 12 VDC local power source for battery management and connected security devices
(e.g. expanders), 8 wired zones and 2 fully programmable relay outputs.
The PSU comes in a tamper protected hinged metal housing with space for an optional 17 Ah
battery and 3 expanders..
 SPCP433.300 Smart PSU (17 Ah) with 2-Door Expander
The SPCP433.300 smart power supply expander (PSU) extends the SPC system via X-BUS with
a monitored 12 VDC local power source for battery management and connected security devices
(e.g. expanders) and advanced door control functionality for 2 entry doors or 1 entry/exit door.
The PSU comes in a tamper protected hinged metal housing with space for an optional 17 Ah
battery and 3 expanders.
9
X-BUS
The system supports a comprehensive Siemens reader portfolio and different card
technologies for an easy access to areas through up to 64 doors throughout a building.
The door controller manages the door covering both, intrusion and access
requirements, with same infrastructure and configuration.
 SPCA210.100 2-Door Expander
The SPCA210.100 2-Door Expander extends the SPC controller with advanced door control
functionality for 2 entry doors or 1 entry/exit door.
The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / 1 valid
per reader), 4 zones (1 position- and 1 opening switch per door), 2 relay outputs
(1 lock per door) and an on-board buzzer to signal "door open too long" events.
To allow greatest flexibility, the zones and outputs are freely programmable for other purposes if
not used for door control. Up to 512 priority card holders can be stored on the expander for
standalone operation in case of communication loss to the control panel.
The Expander comes in a tamper protected housing and features also an X-BUS status LED for
easy device identification and extensive self-diagnostic capabilities.
Wiegand / Clock&Data
AR6181-RX & MX
HD500-EM & Cotag
ARS6311-RX
AR6182-RX & MX
PP500-EM
PR500-EM & Cotag
 Compatible readers1
The Siemens readers below support the access functionality on the SPCA210.100 in an optimal
way:
125 kHz
AR6181-RX
Miro/Hitag serial reader
AR6182-RX
Miro/Hitag reader with keypad
ARS6311-RX
SiPass standalone reader
HD500-EM
Heavy-duty proximity reader
PP500-EM
Heavy duty reader with keypad
PR500-EM
Mullion proximity reader
Cotag
HD500-Cotag
PR500-Cotag
HF500-Cotag
Heavy-duty proximity reader
Mullion proximity reader
Hands-free reader
Smart Card
AR6181-MX
AR6182-MX
Multi-technology reader without keypad
Multi-technology reader with keypad
HF500-Cotag
1
Please refer to the corresponding data sheet of card readers for detailed information of technical details (e.g. supported card technologies, supply voltage) and
availability.
10
X-BUS
Audio trails and video images from pre-, post- and live-events can be sent over IP to
CMS/ARC. This allows the CMS operator to verify and confirm an alarm in less time
with a high true alarm rate.
 SPCV320.000 Audio Expander, 4 Inputs / 1 Ouput
The SPCV320.000 audio expander extends the SPC system via X-BUS with an audio
verification zone, 4 wired zones and 1 open collector output. The built in microphone and
speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS
and the SPC system. Up to 3 audio satellites (WAC11 speaker / microphone, WAS11
microphone) can be connected to the expander.
 SPCV321.000 Audio Expander, 4 Inputs / 1 Ouput
The SPCV321.000 audio expander extends the SPC system via X-BUS with an audio
verification zone, 4 wired zones and 1 line output to drive an external audio pre-amplifier. The
built in microphone and speaker allow pre- / post-event audio recording and live audio (listen /
talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (WAC11 speaker /
microphone, WAS11 microphone) can be connected to the expander.
 SPCK623.100 Comfort Keypad with Audio and Card Reader
The SPCK623.100 comfort keypad is ideal to operate single area and multi area applications in a
user friendly way. The built in speaker and sensitive microphone support audio features as alarm
verification or voice annunciation.
 Compatible Siemens IP-Cameras
The following Siemens IP-cameras2 ideally support the integrated video verification features.
CCIC1410 1/4" IP-Cameras
CFMC1315 1/3" IP Fixdome 1.3MP Colour
2
Please refer to the corresponding data sheet of IP-cameras for detailed information of technical and availability.
11
X-BUS
The signals of Intrunet wireless detectors and remote controls can be received via any
of the connected wireless access points allowing optimal signal reception and range
extension within an application. And the rollout is done very quickly via keypad, web
browser or the SPC Pro programming tool.
 SPCW110.000 SiWay RF-Kit for Panel with Metallic Housing
The SPCW110.000 SiWay RF-Kit for Panel extends the SPC control panel with a wireless
access point for Intrunet wireless detectors and remote controls within the reception range.
The wireless module plugs directly onto the main PCB of compatible SPC panels with metal
housing. The kit also includes a stub antenna to mount on metal cabinets.
 SPCW112.000 SiWay RF-Module for LCD Keypad
The SPCW112.000 SiWay module for the SPCK420/421 standard LCD keypad, extends the
SPC system with a wireless access point for Intrunet wireless detectors and remote controls
within reception range. The wireless module plugs directly on the keypad main PCB.
 SPCW130.100 SiWay RF-Expander
The SPCW130.100 SiWay RF-expander is connected to the X-BUS and provides a wireless
access point for the Intrunet wireless detectors and remote controls linked to the system.
The expander comes in a plastic housing with front tamper protection and also features an XBUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic
capabilities.
 Compatible Intrunet wireless detectors and peripheral devices3
A comprehensive range of wireless SiWay peripherals is supported by the SPC-Series:
IR160W6-10
IGBW6-10
IWFW6-10
3
IR65W6-10 ADM-I12W1
IOPW6-11
IMKW6-10
IR160W6-10
IR65W6-10
ADM-I12W1
IGBW6-10
IOPW6-11
IMKW6-10
IWFW6-10
IRCW6-11
IKPW6-10
IPAW8-10
PIR detector 18 m, black triplex mirror
PIR detector, ceiling mount
PIR wireless 868 MHz detector
Glass break detector
Smoke detector
Magnet contact
Flood detectors
Remote control
Wireless LED keypad
Wireless Personal Alarm
IRCW6-11 IKPW6-10 IPAW8-10
Please refer to the corresponding data sheet of Intrunet wireless detectors and peripheral devices for compatibility, technical details and availability for the required
country.
12
Alarm Receiving Center
PSTN
IP
GSM
Service PC
Mobile phone
The SPC panels offer multi-path communications via IP, GSM and PSTN. All the
modems modules are pluggable to allow any combination to be used. The panel
supports remote connectivity over all communication options, to provide engineering
functions including configuration or diagnostics, and to the user the ability to remotely
manage the premises.
 SPCN110.000 PSTN Module, V90
The SPCN110.000 PSTN module (up to 56K) is compatible with the complete SPC panel range
and plugs directly on the main PCB, removing the need for any additional wiring. The modem
can take control of the line and communicates with a central station (ARC) using common
format protocols (SIA, Contact ID). It also supports a PPP connection to the SPC Pro Software
for remote programming and configuration up/download. The PSTN modem can be used as the
primary source of communication or as a backup to a GSM modem.
 SPCN310.000 GSM Module incl. Antenna
The SPCN310.000 GSM module can be assigned to any mobile network by the insertion of a
standard SIM card. The modem is compatible with the complete range of SPC panels and plugs
directly on the main PCB removing the need for any additional wiring. The unit comes with an
external antenna that fits on the cabinet.
The modem communicates with a central station (ARC) using common format protocols (SIA,
Contact ID) or IP over GPRS to an SPC Com alarm receiver. It also supports a PPP connection
to the SPC Pro Software for remote programming and configuration up/download. The SMS
feature allows a user / engineer to be sent a predefined text when selected events occur in the
system or receive predefined SMS commands for security system control. The GSM modem can
be used as the primary source of communication or as backup to the PSTN modem or IP
communication.
 SPCW101.000 External Aerial Kit
The SPCW101.000 external antenna kit (868 MHz) allows the connection of a GSM or wireless
module in a housing to an externally mounted antenna for better reception levels. The kit comes
with a stub antenna, 2 m cable with connectors and a mounting bracket. The antenna connects to
the GSM or wireless modules with a fitted SMA connector for external antenna option.
13
Clever engineering tools provide a range of online and offline methods for the fast and
easy configuration of the SPC control panels.
The tool suite supports automated processes to reduce maintenance and administration
costs of the installed SPC panel base during its product lifecycle.
 SPCX410.000 SPC Fast Programmer
The Fast Programmer, SPCX410, provides a simple method of transferring configuration files
from a PC (USB) to an SPC panel via the SPC Pro application, in addition to backing up
configuration files from an SPC panel to the Fast Programmer, without a direct PC connection.
This portable device has an on-board 1 MB flash memory, which typically can store in excess of
100 configuration files or a new firmware release (subject to file size) for on site controller
firmware update.
 SPCS310.000 SPC Pro Programming Tool
The SPCS310.000 configuration software allows the panels to be easily configured via PC in
online or offline mode. In online mode the system can also be controlled (e.g. set/unset of areas
or inhibit of zones) and event log and system status can be viewed.
The software connects via RS232, USB, IP or GSM/PSTN modems to the SPC controller. The
SPC Fast Programmer is also supported.
14
 Technical features
SPC6330.320-L1
INTRUSION
Programmable areas
60
Number of on-board zones
8
Max. number of hardwired zones
Supervised input
EOL resistor
512
No EOL / Single EOL / Dual EOL / Tri EOL (Antimask PIR) / Inertia Sensors
4K7 (default), other resistor combinations configurable
Number of on-board outputs
6
Max. number of outputs
512
Max. number of user codes
512
Event memory
10’000 intrusion events
Calendar based time channels
64 (53-week calendar)
Cause & Effects
Language
1024 triggers / 512 mapping gates
Multi-language support (de, en, es, fr, it, nl, sv, vls, plus 1 imported language file)
Voice assistance
Supported
Financial functions
Supported
FIELD BUS
Bus connections
Number of field devices1)
X-BUS (2 spurs or 1 loop)
128 (32 Keypads, 32 Door-expanders, 64 Input/Output expanders)
CONNECTIVITY
Web Server
Pluggable Communication Interfaces
HTTPS (embedded)
PSTN or GSM/GPRS modem (system supports 2 optional modems simultaneously)
Standard Communication Protocol
SIA, Contact ID, SMS messaging
Fast Programmer Support
Firmware Upgrade
Yes
Local / Remote upgrade for Controller and Expanders
SMS event notification / Panel control
With GSM option
Local and Remote configuration
(SPC Pro support)
Automated Remote Maintenance
(SPC RM support)
Automated Site Administration
(SPC Safe support)
IP Alarm and Event transmission
(SPC Com XT support)
Via RS232, USB, PSTN, GSM,
IP over Ethernet
Via PSTN, GSM,
IP over Ethernet
Via IP over Ethernet
IP over Ethernet / GPRS
ACCESS
Event memory
10,000 access events
Max. number of doors (entry / entry-exit)
64 / 32
Max. number of door groups
32
Supported card technologies
EM4102 / SiPass, Wiegand 26-bits, HID Corporate 1000
Pass-back prevention (soft / hard)
Yes
ALARM VERIFICATION
Number of verification zones
Audio
Video
16 (combined audio and/or video devices)
Max. 16 audio devices (SPCV32x audio expander, SPCK623 keypad),
up to 60 sec. pre / 60 sec. post audio recording
Max. 4 IP cameras (Siemens CCIC1410 / CFMC1315, Generic),
up to 16 pre / 16 post event images (by JPEG resolution 320 x 240, max. 1 frame / sec.)
WIRELESS
Max. number of wireless zones 2)
120
Max. number of wireless remote controls
512
Max. number of Intrunet wireless detectors
received by any wireless receiver
(recommended)
20
1)
2)
More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs / outputs cannot exceed specified system limits.
A wireless zone takes away a wired zone / optional RF receivers required.
15
 Technical data
SPCP332.300/333.300
Smart PSU with
I/O-Expander
8
SPC6330.320-L1
Intrusion CP, G3
Controller and PSU
Number of on-board zones
8
EOL resistor
Max. number of hardwired
zones
Max. number of wireless
zones 1)
Dual 4K7 (default), other resistor combinations configurable
Number of on-board open
coll.
Number of on-board relays
Max. number of outputs
Dual 4K7 (default), other resistor combinations configurable
512
120
2, for internal / external bell (max. 400 mA each)
3, freely programmable
(each max. 400 mA resistive switching current, supplied via
auxiliary output)
1 strobe (30 VDC / 1 A resistive switching current)
2
2, for door control
(single-pole changeover, 30 VDC / max. 1 A)
512
Programmable areas
60
Max. number of user codes
512
Intrusion Event Logs
10,000 log events
Access Event Logs
10,000 log events
Field bus 2)
Number of field devices
SPCP432.300/433.300
Smart PSU with
2-Door Expander
4, for door control
3)
Tamper contact
X-BUS on RS-485 (307 kb/s)
128 (32 Keypads, 32 Door-expanders,
64 Input/Output expanders)
SPCP333: Front spring tamper, back tamper
SPCP433/332/333: Front spring tamper
Front spring tamper, back tamper
Power supply
2 X-BUS (2 spurs or 1 loop),
2 RS232 (to X-10 controller or external communication),
1 USB (PC connection),
1 SPC Fast Programmer,
1 Ethernet (RJ45)
Type A (per EN50131-1), Integrated on controller PCB
Input voltage
Interfaces
X-BUS on RS-485 (307 kb/s)
2 card readers, Wiegand 26 bits
(standard), Clock&Data and
Wiegand 36 bit (proprietary)
Type A (per EN50131-1)
230 V AC, +10 to -15 %, 50 Hz at transformer
230 V AC, +10 to -15 %, 50 Hz
Operating current
Max. 200 mA at 12 VDC
Max. 95 mA (all relays activated)
Quiescent current
Max. 170 mA at 12 VDC
Auxiliary power (nominal)
Max. 750 mA at 12 VDC
Output voltage
Battery capacity / type
Housing
Dimensions (W x H x D in
mm)
11-14 V DC in normal conditions )
Max. 17 Ah / 12 V,
YUASA NP17-12FR (17 Ah)
Hinged metal housing (1.2 mm mild steel)
326 x 415 x 114 mm
Weight
6.10 kg
Colour
RAL 9003 (signal white)
Operating temperature
Relative humidity
1)
2)
3)
Max. 77 mA
Max. 1500 mA at 12 VDC (750 mA per output)
11-14 VDC in normal conditions
(mains powered and fully charged battery)
SPCP332/432: Max. 7 Ah /12 V, YUASA NP7-12FR (7 Ah),
SPCP333/433: Max. 17 Ah / 12 V, YUASA NP17-12FR (17 Ah),
SPCP332/432: Small metal housing
SPCP333/433: Hinged metal housing
(1.2 mm mild steel)
264 x 357 x 81 (SPCP332/432)
326 x 415 x 114 (SPCP333/433)
4.70 kg (SPCP332/432)
6.30 kg (SPCP333/433)
RAL 9003 (signal white)
0 ~ +40 °C
0 ~ +40 °C
Max. 90 % (non-condensing)
Max. 90 % (non-condensing)
A wireless zone takes away a wired zone / optional RF receivers required.
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.
More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs / outputs cannot exceed specified system limits.
16
Expanders
Operating voltage
Field bus 1)
Tamper contact
Operating temperature
Relative humidity
Color
Housing
Dimensions
(W x H x D in mm)
Weight
Operating current
Quiescent current
Number of on-board
zones
EOL resistor
SPCE650.100/652.100
Expander,
8 Inp./2 Outp.
9.5 ~ 14 VDC
SPCE450.100/452.100
Expander,
8 Relay-Outputs
9.5 ~ 14 VDC
SPCV320.000
Audio expander with 4 inputs
and 1 output
9.5 ~ 14 VDC
SPCV321.000
Audio expander with 4 inputs
and 1 line output
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front spring tamper,
back tamper (SPCE652)
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing (ABS)
200 x 153 x 47 (Housing)
150 x 82 x 20 (PCB)
0.35 kg
Max. 80 mA at
12 VDC (all relays operated)
Max. 40 mA at
12 VDC
X-BUS on RS-485 (307 kb/s)
On-board front spring tamper,
back tamper (SPCE452)
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing (ABS)
200 x 153 x 47 (Housing)
150 x 82 x 20 (PCB)
0.40 kg
Max. 190 mA at
12 VDC (all relays operated)
Max. 40 mA at
12 VDC
X-BUS on RS-485 (307 kb/s)
X-BUS on RS-485 (307 kb/s)
Front / back tamper switch
Front / back tamper switch
-10 ~ +50 °C
-10 ~ +50 °C
Max. 90 % (non condensing)
Max. 90 % (non condensing)
RAL 9002 (grey white)
RAL 9002 (grey white)
Plastic housing (ABS)
Plastic housing (ABS)
105 x 145 x 70 mm
105 x 145 x 70 mm
0.240 kg
Max. 510 mA at 12 VDC
(without satellites)
Max. 40 mA at 12 VDC
(without satellites)
0.240 kg
Max. 510 mA at 12 VDC
(without satellites)
Max. 40 mA at 12 VDC
(without satellites)
8
4
4
Dual 4K7 (default), other
resistor combinations
configurable
Dual 4K7 (default), other
resistor combinations
configurable
1 (open collector, max. 400 mA
resistive switching current)
Dual 4K7 (default), other
resistor combinations
configurable
Max. 3 audio satellites
(WAC11 speaker / microphone,
WAS11 microphone)
Max. 3 audio satellites
(WAC11 speaker / microphone,
WAS11 microphone)
4
4
Number of on-board
open. collector outputs
Number of on-board
relays
2 (single-pole changeover
relays, 30 VDC / max. 1 A
resistive switching current)
8 (single-pole changeover
relays, 30 VDC / max. 1 A
resistive switching current)
Expansion
Number of on-board
zones
Number of on-board
open coll.
1, freely programmable (max.
400 mA resistive switching
current)
1 (red)
Loudspeaker: 2W / 16 Ω,
Microphone: Foil electret
condenser microphone with
preamplifier (3 KHz
bandwidth)
LED indicators
Audio
Audio outputs
1)
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829
17
1 (red)
Loudspeaker: 2W / 16 Ω,
Microphone: Foil electret
condenser microphone with
preamplifier (3 KHz
bandwidth)
1 line output (100 Ω / 0.775V
RMS, suitable for connection to
audio pre-amplifier).
Expanders
LED indicators
SPCA210.100
2-Door Expander
4 outputs
(1 void and 1 valid per reader)
SPCW130.100
SiWay RF-Expander
Special keys
Operating voltage
9.5 ~ 14 VDC
9.5 ~ 14 VDC
Field bus 1)
X-BUS on RS-485 (307 kb/s)
X-BUS on RS-485 (307 kb/s)
Tamper contact
On-board front spring tamper
On-board front spring tamper
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Operating temperature
Relative humidity
Color
Housing
Dimensions
(W x H x D in mm)
Weight
Operating current
Quiescent current
Plastic Housing (ABS)
Plastic Housing (ABS)
200 x 153 x 47 (Housing)
150 x 82 x 20 (PCB)
0.36 kg
Max. 80 mA
at 12 VDC (all relays operated)
Max. 45 mA at
12 VDC
200 x 153 x 47 (Housing)
150 x 82 x 20 (PCB)
0.34 kg
Max.60 mA at
12 VDC
Max. 60 mA at
12 VDC
Card reader
EOL resistor
Number of on-board
relays
4, for door release switch
(DRS) and door position switch
(DPS), or freely programmable
Dual 4K7 (default), other
resistor combinations
configurable
2, for door locks or freely
programmable (single-pole
changeover, 30 VDC / max. 1
A resistive switching current)
Card reader protocols
16 tri-color LEDs
2 tri-color LEDs
4 function keys, freely
programmable
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front / back tamper
switch
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing
(Polycarbonate)
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front / back tamper
switch
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing (Polycarbonate)
112 x 92 x 28
112 x 92 x 38
0.19 kg
Max. 70 mA at
12 VDC (all LEDs operated)
Max. 30 mA at
12 VDC
Integrated 125 kHz reader
(EM 4102)
0.27 kg
Max. 50 mA at 12 VDC (relay
and LEDs operated)
Max. 30 mA at
12 VDC
1
Dual 4K7 (default), other
resistor combinations
configurable
1 (single-pole changeover, 30
VDC / max. 1 A resistive
switching current)
3 key positions (2-0-1 in 90°
steps, cylinder type
KABA1008C)
Programmable key
input
Number of card
readers
SPCE110.100
Key Switch Expander
Integrated SiWay RF receiver
(868 MHz)
Radio Module
Number of on-board
zones
SPCE120.100
Indication Expander
2
Wiegand 26 bit (standard),
Wiegand 36 bit (proprietary),
Clock&Data (proprietary)
18
Keypads
LED indicators
Special keys
Operating voltage
Field bus 1)
Tamper contact
Operating temperature
Relative humidity
Color
Housing
Dimensions
(W x H x D in mm)
Weight
Operating current
Quiescent current
SPCK420.100
LCD-Keypad, 2x16
Characters
3 status LEDs
2 soft keys,
1 multi-dimensional
navigation key
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front /
back spring tamper
5° ~ +40 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
SPCK421.100
LCD-Keypad, 2x16 Char,
Card Reader
3 status LEDs
2 soft keys,
1 multi-dimensional
navigation key
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front /
back spring tamper
5° ~ +40 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing(ABS)
Plastic Housing (ABS)
148 x 85 x 33
148 x 85 x 33
0.21 kg
Max. 90 mA at
12 VDC
(backlight, LEDs, sounder
operated)
Max. 45 mA at
12 VDC
0.21 kg
Max. 110 mA at
12 VDC
(backlight, LEDs, sounder,
reader operated)
Max. 80 mA at
12 VDC
Integrated 125 kHz reader
(EM 4102)
Optional (SPCW112)
Card reader
Radio Module
Optional (SPCW112)
5 status LEDs
4 soft keys,
1 multi-dimensional
navigation key
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front /
back tamper switch
5° ~ +40 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing
(Polycarbonate)
SPCK623.100
Comfort Keypad w.
Audio/Card Reader
5 status LEDs
4 soft keys,
1 multi-dimensional
navigation key
9.5 ~ 14 VDC
X-BUS on RS-485 (307 kb/s)
On-board front /
back tamper switch
5° ~ +40 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic Housing
(Polycarbonate)
112 x 185 x 28
112 x 185 x 28
SPCK620.100
Comfort Keypad
0.38 kg
0.38 kg
Max. 155 mA at
12 VDC (backlight, LEDs,
sounder operated)
Max. 230 mA at
12 VDC (backlight, LEDs,
voice annunciation operated)
Max. 55 mA at
12 VDC
Max. 110 mA at
12 VDC
Integrated 125 kHz reader
(EM 4102)
Supported via integrated
speaker and microphone
Audio
1)
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.
Controller Plug
on Modules
Network
connection
Operating
current
Quiescent
current
Operating
temperature
Relative
humidity
Mounting
Dimensions
(W x H x D in
mm)
Weight
SPCW110.000
SiWay RF-Kit for Panel
SPCW111.000
SiWay RF Module for
Panel
SPCW112.000
SiWay RF Module for
Keypad
Max.130 mA
Max.10 mA
Max.10 mA
Max.10 mA
Max. 25 mA
Max. 130 mA
Max. 10 mA
Max. 10 mA
Max. 10 mA
-10 °C ~ 50 °C
-10 °C ~ 50 °C
-10 °C ~ 50 °C
-10 °C ~ 50 °C
-10 °C ~ 50 °C
Max. 90 % (noncondensing)
Max. 90 % (noncondensing)
Plug on module to SPC
controller
Max. 90 % (noncondensing)
Plug on module to SPC
controller with plastic
housing / cabinet.
Max. 90 % (noncondensing)
Plug on module to SPC
controller
Max. 90 % (noncondensing)
Plug on module to SPC
controller, antenna
mounted on metal cabinet
90 x 38 x 25 (PCB)
90 x 38 x 25 (PCB)
55 x 22 x 20 (PCB)
55 x 22 x 20 (PCB)
55 x 22 x 20 (PCB)
0.03 kg
0.03 kg
0.05 kg
SiWay RF receiver
(868 MHz)
0.01 kg
SiWay RF receiver
(868 MHz)
0.01 kg
SiWay RF receiver
(868 MHz)
SPCN110.000
PSTN Module, V90
PSTN (analogue
telephone network)
Max.35 mA
(communication active)
SPCN310.000
GSM Module incl.
Antenna
GSM / GPRS (dual band
900/1800 MHz)
Radio Module
Engineering and
Maintenance
Tools
Interfaces
Communication
protocol
System
compatibility
Memory
Database
Housing
SPCX410.000
SPC Fast Programmer
Plug on module to SPC
keypads SPCK420/421
SPCS310.000
SPC Pro Programming Tool
1 x USB (to PC), 1 x 10-pin connector (to SPC controller)
Proprietary (via RS232, USB, TCP/IP on Ethernet, PSTN, GSM, Data
transfer from/to SPC Fast Programmer)
Single PC solution,
Running on PC with XP/Vista, 7
Support of SPC4000/SPC5000/SPC600
Min. 1 GB required
Local file storage in compressed format.
PC: Windows 2000, XP, Vista, 7
SPC controller: SPC4000/SPC5000/SPC6000
1 MB
Plastic Housing (ABS)
19
 Details for ordering
Dimensions
(W x H x D in mm)
Weight
S54541-C105-C100 SPC6330.320-L1 Intrusion CP, 8-512 zones, Ethernet, G3 metal housing
326 x 415 x 114
6.10 kg
SPCP332.300
S54545-C102-A100 SPCP332.300 Smart PSU (7 Ah) with I/O-Expander
264 x 357 x 81
4.70 kg
SPCP333.300
S54545-C101-A100 SPCP333.300 Smart PSU (17 Ah) with I/O-Expander
326 x 415 x 114
6.30 kg
SPCP432.300
S54545-C103-A100 SPCP432.300 Smart PSU (7 Ah) with 2-Door Expander
264 x 357 x 81
4.70 kg
SPCP433.300
S54545-C104-A100 SPCP433.300 Smart PSU (17 Ah) with 2-Door Expander
326 x 415 x 114
6.30 kg
SPCK420.100
S54543-F101-A100 SPCK420.100 LCD-Keyp., 2x16 Char.
148 x 85 x 33
0.21 kg
SPCK421.100
S54543-F102-A100 SPCK421.100 LCD-Keyp., 2x16 Char., Card Reader
148 x 85 x 33
0.21 kg
SPCK620.100
S54543-F110-A100 SPCK620.100 Comfort Keypad
112 x 185 x 28
0.38 kg
SPCK623.100
S54543-F111-A100 SPCK623.100 Comfort Keypad w. Audio/Card Reader
112 x 185 x 28
0.38 kg
SPCE110.100
S54542-F104-A100 SPCE110.100 Key Switch Expander
112 x 92 x 38
0.27 kg
SPCE120.100
S54542-F105-A100 SPCE120.100 Indication Expander with Card Reader
112 x 92 x 28
0.19 kg
Type
Item No.
SPC6330.320
Designation
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
SPCE650.100
S54542-F101-A100 SPCE650.100 Expander, 8 Inp./2 Outp.
SPCE652.100
S54542-F106-A100 SPCE652.100 Expander, 8 Inp./2 Outputs, back tamper
SPCE450.100
S54542-F103-A100 SPCE450.100 Expander, 8 Relay-Outputs
SPCE452.100
S54542-F107-A100 SPCE452.100 Expander, 8 Relay-Outputs, back tamper
SPCV320.000
S54542-F108-A100 SPCV320.000 Audio expander with 4 inputs and 1 output
105 x 145 x 70
0.24 kg
SPCV321.000
S54542-F109-A100 SPCV321.000 Audio expander with 4 inputs and 1 line output
105 x 145 x 70
0.24 kg
SPCA210.100
S54547-A101-A100 SPCA210.100 2-Door Expander
SPCW130.100
S54554-F101-A100 SPCW130.100 SiWay RF-Expander
SPCW110.000
S54554-B101-A100 SPCW110.000 SiWay RF -Kit for Panel with Metal Housing
SPCW111.000
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
200 x153 x 47 (Housing)
150 x 82 x 20 (PCB)
0.35 kg
0.35 kg
0.40 kg
0.40 kg
0.36 kg
0.34 kg
50 x 22 x 20 (PCB)
0.05 kg
S54554-B102-A100 SPCW111.000 SiWay RF-Module for Panel with Plastic Housing/Cover
50 x 22 x 20 mm (PCB)
0.01 kg
SPCW112.000
S54554-B103-A100 SPCW112.000 SiWay RF-Module for standard LCD keypad
50 x 22 x 20 mm (PCB)
0.01 kg
SPCN110.000
S54550-B101-A100 SPCN110.000 PSTN Module, V90
90 x 38 x 25 (PCB)
0.03 kg
SPCN310.000
S54550-B102-A100 SPCN310.000 GSM Module incl. Antenna
90 x 38 x 25 (PCB)
0.03 kg
SPCW101.000
S54559-B101-A100 SPCW101.000 External Aerial Kit
200 (L)
0.09 kg
SPCX410.000
S54559-B102-A100 SPCX410.000 SPC Fast Programmer
91 x 32 x 17
0.04 kg
SPCS310.000
Supplied with panel SPCS310.000 SPC Pro Programming Tool
IB42-EM
S24246-D4901-A1
EM laminated card without print
86 x 54 x 1
0.01 kg
IB44-EM
S24246-D4902-A1
Key tag
36 x 30 x 7
0.01 kg
SPCY130.000
S54559-B116-A100 SPCY130.000 Backtamper kit G3 cabinet
n. a.
0.06 kg
n. a.
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
© Siemens AB • Document no. A6V10343411 • Edition: 30.09.2011 • Document version: 1.4
www.buildingtechnologies.siemens.com
Siemens AB Building
Technologies Division
International Headquarters
Fire Safety & Security Products
Postal Address P.O. Box 1275
SE-171 24 Solna, Sweden
Tel: + 46 8728 1000
n. a.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising