G057VTN01 V1
Cover Lens
Complete Displays Based
Systems Provider
Integrating TFT LCD, Touch,
Bezel
Touch Sensor
Embedded Board, Microsoft
Embedded OS, Wireless,
Printer and all relevant cables
Bonding/Optical/Tape
Embedded Board/AD
Driving solution
working together seamlessly
Total Cost of Ownership
TFT display
Storage
Wireless
Software
Saving you time and money
and allowing you to free up
your engineering resource
Backlight Driver
Local Expertise
Computer-on-Module
Memory
Housing
Technical support at your
doorstep with local labs and
engineers taking you from
concept to production
Technology
Datasheet
Datasheet
G057VTN01.1
More Value!
If you require a touch panel and/or mechanical integration,
please scan the QR code or click the URL
www.avnet-embedded.eu/products/displays
www.avnet-embedded.eu
August 2014
G057VTN01.1
Module
5.7 Inch Color TFT-LCD
Model Name
G057VTN01.1
Customer
Date
On
20
14
/0
8/
07
□Preliminary Specification
■Final Specification
Approved by
Date
na
Prepared by
lU
se
Checked &
Approved by
2014/8/5
On
ly
Grace Hung
Fo
rA
VN
General Display Business Division / AU Optronics
corporation
AU
O
Co
nf
id
en
tia
l
Note: This Specification is subject to change
without notice.
2014/8/5
ET
In
te
r
Mask Tsai
G057VTN01.1 Ver. 1.
1/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
Contents
1. Operating Precautions ........................................................... 4
2. General Description ............................................................... 5
2.1 Display Characteristics .................................................................................................................. 5
2.2 Optical Characteristics................................................................................................................... 6
3. Functional Block Diagram ...................................................... 9
4. Absolute Maximum Ratings.................................................. 10
4.1 Absolute Ratings.......................................................................................................................... 10
4.2 Absolute Ratings of Environment ................................................................................................ 10
On
20
14
/0
8/
07
5. Electrical Characteristics ..................................................... 11
5.1 TFT-LCD Driving .........................................................................................................................11
5.2 Backlight Unit Driving ................................................................................................................ 12
6. Signal Characteristic............................................................ 13
On
ly
6.1 Pixel Format Image...................................................................................................................... 13
6.2 Scanning Direction ...................................................................................................................... 13
6.3 The Input Data Format................................................................................................................. 14
6.4 TFT- LCD Interface Signal Description ....................................................................................... 15
6.5 TFT- LCD Interface Timing ......................................................................................................... 16
lU
se
6.6 LED Backlight Unit Interface Signal Description ........................................................................ 17
6.7 Power ON/OFF Sequence ............................................................................................................ 17
7. Connector & Pin Assignment................................................ 18
In
te
r
na
7.1 TFT- LCD Signal (CN1): LCD Connector ................................................................................... 18
7.2 LED Backlight Unit (CN2): Backlight Connector ........................................................................ 18
7.3 LED Light Bar Input (CN3): Light Bar Connector ....................................................................... 19
Fo
rA
VN
ET
8. Reliability Test Criteria ........................................................ 20
9. Mechanical Characteristics .................................................. 21
10. Label and Packaging .......................................................... 22
10.1 Shipping Label (on the rear side of TFT-LCD display)............................................................... 22
10.2 Carton Package.......................................................................................................................... 22
11 Safety................................................................................. 23
AU
O
Co
nf
id
en
tia
l
11.1 Keen Edge Requirements ........................................................................................................... 23
11.2 Materials.................................................................................................................................... 23
11.3 Capacitors.................................................................................................................................. 23
11.4 National Test Lab Requirement .................................................................................................. 23
G057VTN01.1 Ver. 1.
2/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
Record of Revision
Version
Revise Date
Page
1.0
2014/8/5
-
Old description
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
First draft of final specification.
G057VTN01.1 Ver. 1.
3/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
1. Operating Precautions
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not
to scratch it.
2) Be sure to power off your machine before connecting or disconnecting your signal cable to
TFT-LCD Module.
3) Wipe off water drop on display area immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard
object.
6) To avoid ESD (Electro Static Discharge) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the TFT-LCD module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged.
10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply
abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module by
end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen
saver or moving content periodically if fixed pattern is displayed on the screen.
G057VTN01.1 Ver. 1.
4/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
2. General Description
G057VTN01.1 is designed for industrial display applications with VGA (640 x RGB x 480) resolution
and 262k colors (Digital 6-bits Parallel RGB interface). It is composed of a TFT-LCD panel, driver
ICs, control and power supply circuits board and backlight unit including LED driver circuit.
2.1 Display Characteristics
The following items are G057VTN01.1 characteristics summary at 25 ℃(Room Temperature).
Unit
Specifications
Screen Diagonal
inch
5.7
Active Area
mm
115.2(H) x 86.4(V)
Pixels H x V
dots
640 x 3(RGB) x 480
Pixel Pitch
mm
0.18 x 0.18
Pixel Arrangement
-
R.G.B. Vertical Stripe
Display Mode
-
TN, Normally White
On
20
14
/0
8/
07
Items
Volt
3.3 typ.
Typical Power Consumption
Watt
2.54W (LCD:0.5W/LED BLU: 2.04W)
@ All black pattern, Full Load and VLED=12V
Grams
Physical Size
mm
150g (typ.), 165g (max.)
lU
se
Weight
On
ly
Nominal Input Voltage VDD
144.0(H)x 104.6(V) x 12.3(D) (typ.)
-
Digital 6-bit Parallel RGB
Surface Treatment
-
Anti-Glare, Hardness 3H
Support Color
-
262K colors
The most suitable view angle
-
12 o’clock
o
C
C
o
RoHS Compliance
In
te
r
ET
Fo
rA
VN
Temperature Range
Operating
Storage (Non-Operating)
na
Electrical Interface
RoHS Compliance
AU
O
Co
nf
id
en
tia
l
-
-30 to +85
-30 to +85
G057VTN01.1 Ver. 1.
5/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature).
Unit
cd/m2
Uniformity
5 Points
%
Contrast Ratio
Remark
440
550
-
Note 1
75
-
-
500
800
-
msec
Rising
-
15
20
msec
Falling
-
10
15
msec
Rising + Falling
-
25
35
degree
degree
Horizontal
CR = 10
(Right)
(Left)
70
80
70
80
degree
degree
Vertical
CR = 10
(Upper)
(Lower)
60
70
60
70
White x
0.263
0.313
0.363
White y
0.279
0.329
0.379
Red x
0.499
0.549
0.599
Red y
0.264
0.314
0.364
Green x
0.279
0.329
0.548
0.598
0.648
Blue x
0.106
lU
se
0.379
Green y
0.156
0.206
Blue y
0.068
0.118
0.168
-
50
-
Color / Chromaticity
Coordinates (CIE 1931)
Color Gamut
Max.
na
Viewing Angle
Typ.
In
te
r
Response Time
Min.
%
1, 2, 3
Note 4
Note 5
-
-
Note 6
-
ET
Note 1: Measurement method
Note
On
20
14
/0
8/
07
White Luminance
Conditions
VLED =12V, DPWM =100%
(center point)
On
ly
Item
Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
1∘with 50cm viewing distance
Test Point
Center
Environment
< 1 lux
Co
nf
id
en
tia
l
Fo
rA
VN
Equipment
LCD Module
SR_3 or
equivalent
AU
O
measuring distance
Module Driving Equipment
G057VTN01.1 Ver. 1.
6/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H))
W
W /4
W /4
W /4
W /4
H /4
2
1
H /4
3
H
H /4
5
On
20
14
/0
8/
07
4
H /4
On
ly
Note 3:
The luminance uniformity of 5 points is defined by dividing the minimum luminance value by the maximum luminance
value at full white condition.
Brightness @ “White” state
Brightness @ “Black” state
In
te
r
na
Contrast ratio (CR) =
lU
se
Note 4: Definition of contrast ratio (CR):
Note 5: Definition of response time:
ET
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
of amplitude. Please refer to the figure as below.
%
100
90
Optical
White
response
Black
Tr
White
AU
O
10
0
Co
nf
id
en
tia
l
Tf
Fo
rA
VN
time) and from “Black” to “White” (rising time), respectively. The response time interval definition is between 10% and 90%
G057VTN01.1 Ver. 1.
7/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
Note 6: Definition of viewing angle
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over 180° horizontal and 180° vertical
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure.
G057VTN01.1 Ver. 1.
8/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
3. Functional Block Diagram
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
The following diagram shows the functional block of the G057VTN01.1 color TFT/LCD module.
G057VTN01.1 Ver. 1.
9/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
4. Absolute Maximum Ratings
4.1 Absolute Ratings
Item
Symbol
Min
Max
Unit
Remark
Logic/LCD Drive Voltage
VDD
- 0.3
+ 5.0
Volt
Ta= 25 C
LCD Input Signal Voltage
VIN
- 0.3
+ 5.0
Volt
Ta= 25 C
LED BLU Drive Voltage
VLED
0
23
Volt
Ta= 25 C
LED On/Off Control Voltage
VLED On/Off
0
20
Volt
Ta= 25 C
LED Dimming Input Voltage
VPWM
0
8
Volt
Ta= 25 C
o
o
o
On
20
14
/0
8/
07
o
o
High
4.2 Absolute Ratings of Environment
Symbol
Min
Max
Unit
Remark
Operating Temperature
TOP
-30
+85
℃
Note 1, 2
Storage Temperature
TST
-30
+85
℃
Note 1
lU
se
Note 1: Maximum Wet-Bulb should be 39 ℃ and no condensation.
On
ly
Item
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25 ℃ only.
G057VTN01.1 Ver. 1.
10/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
5. Electrical Characteristics
5.1 TFT-LCD Driving
5.1.1 Power Specification
Parameter
Min
Typ
Max
Units
3.0
3.3
3.6
Volt
VDD
Logic/LCD Drive Voltage
IDD
VDD Current
-
150
165
mA
PDD
VDD Power
-
0.5
0.55
Watt
Allowable Logic/LCD Drive Ripple Voltage
-
-
100
mVp-p
VDDrp
Remark
All Black Pattern
(VDD=3.3V, at 60Hz)
All Black Pattern
On
20
14
/0
8/
07
Symbol
(VDD=3.3V, at 60Hz)
All Black Pattern
(VDD=3.3V, at 60Hz)
3.3V
90%
On
ly
10%
0V
lU
se
0.5ms
In
te
r
na
VDD rising time
5.1.2 Signal Electrical Characteristics
Symbol
Min.
Typ.
Fo
rA
VN
Parameter
ET
Input signals shall be low or Hi-Z state when VDD is off.
Max.
Unit
High
VIH
0.7VDD
-
VDD
Volt
Display Signals
Low
VIL
0
-
0.3VDD
Volt
High
VIH
0.7VDD
-
VDD
Volt
Low
VIL
-
0.3VDD
Volt
0
AU
O
Input Voltage for RL/UD
Co
nf
id
en
tia
l
Logic Input Voltage for
Remarks
G057VTN01.1 Ver. 1.
11/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
5.2 Backlight Unit Driving
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25℃ (Room Temperature)
Symbol
Parameter
Min
Typ
Max
Units
Remark
VLED
Input Voltage
9
12
20
Volt
ILED
Input Current
-
0.17
0.2
A
VLED =12V, DPWM =100%
PLED
Power Consumption
-
2.04
2.45
Watt
VLED =12V, DPWM =100%
Dimming control Voltage High
2.0
3.3
5.0
Volt
Dimming control Voltage Low
-
-
0.2
Volt
FPWM
Dimming Frequency
200
30K
Hz
DPWM
Dimming duty cycle
1
100
%
On Control Voltage
2
3.3
5.5
Volt
Off Control Voltage
-
-
0.8
Volt
LED Forward Current
VF
50
LED Forward Voltage
PLED
LED Power
Ta = 25oC
-
-
-
-
IF = 50mA, Ta = -30oC
-
32
36
Volt
IF = 50mA, Ta = 25oC
-
-
-
-
IF = 50mA, Ta = 85oC
-
1.6
1.8
50000
-
-
Watt
Hrs
Note 5, 6
na
Operating Life
mA
On
ly
IF
Note 3, 4
lU
se
VLED On/Off
Note 1,2
On
20
14
/0
8/
07
VPWM DIM
In
te
r
Note 1: PWM dimming function can be operated by PWM signal. PWM duty cycle can adjust white Luminance.
(PWM High: ON and PWM Low: OFF)
Note 2: PWM signal can not be floating and pull-down to ground when waiting.
ET
Note 3: Enable (VLED On/Off) must be turned on late than VLED and PWM Signal.
Fo
rA
VN
Note 4: Enable (VLED On/Off) must be turned off early than VLED and PWM Signal.
Note 5: If G057VTN01.1 module is driven by high current or at high ambient temperature & humidity condition. The
operating life will be reduced.
data.
Co
nf
id
en
tia
l
Note 6: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated
AU
O
Note 7: See Section 6.6 for LED Backlight Unit Interface Signal Description
G057VTN01.1 Ver. 1.
12/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
6. Signal Characteristic
6.1 Pixel Format Image
lU
se
On
ly
On
20
14
/0
8/
07
Following figure shows the relationship between input signal and LCD pixel format.
na
6.2 Scanning Direction
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Note 1: TFT-LCD interface signal description is shown in section 6.4.
G057VTN01.1 Ver. 1.
13/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
6.3 The Input Data Format
This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
the display of input data.
G057VTN01.1 Ver. 1.
14/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
6.4 TFT- LCD Interface Signal Description
AU
O
Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”.
G057VTN01.1 Ver. 1.
15/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
6.5 TFT- LCD Interface Timing
6.5.1 Timing Characteristics
DE mode only
Symbol
Min.
Typ.
Max.
Unit
Remark
1/ TCLOCK
23.9
25.2
34.2
MHz
Note1
Setup Time
Tdsu
8
ns
RL,GL,BL to
Hold Time
Tdhd
8
ns
DCLK
DE
Setup Time
Tesu
8
ns
Horizontal Section
Period
TH
770
Active
THD
Blanking
THB
130
160
360
Period
TV
516
525
570
Active
TVD
Blanking
TVB
Clock frequency (DOTCLK)
Data
Vertical Section
800
1000
TCLOCK
640
TLINE
480
36
45
90
Note1
Note1
In
te
r
na
lU
se
On
ly
Note 1: Recommended frame rate is 60 Hz.
On
20
14
/0
8/
07
Signal
6.5.2 Input Timing Diagram
Input Timing Definition ( DE Mode)
Fo
rA
VN
ET
TCLOCK
DOTCLK
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Co
nf
id
en
tia
l
Input
Data
DE
THB
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
THD
DE
AU
O
TH
TVB
TVD
G057VTN01.1 Ver. 1.
TV
16/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
6.6 LED Backlight Unit Interface Signal Description
Pin #
Symbol
Pin Description
1
VLED
12V input
2
VLED
12V input
3
GND
Ground
4
GND
Ground
5
PWM DIM
1~100% PWM dimming
6
LED On/Off
0V-Off; 3.3~5V/NC-On
On
20
14
/0
8/
07
Note 1: “NC” stands for ”No Connection”
6.7 Power ON/OFF Sequence
VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any
ET
In
te
r
na
lU
se
On
ly
system shall be Hi-Z state or low level when VDD is off.
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
Power ON/OFF sequence timing
ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the
power when you plug the cable into the input connector or pull the cable out of the connector.
G057VTN01.1 Ver. 1.
17/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
7. Connector & Pin Assignment
7.1 TFT- LCD Signal (CN1): LCD Connector
Manufacturer
Starconn
Connector Model Number
089H33-000100-G2-R
Symbol
Pin#
Symbol
Pin#
Symbol
1
GND
12
GND
23
B3
2
DOTCLK
13
G0
24
B4
3
NC
14
G1
25
4
NC
15
G2
26
5
GND
16
G3
27
6
R0
17
G4
28
7
R1
18
G5
29
8
R2
19
GND
30
9
R3
20
B0
31
10
R4
21
B1
32
11
R5
22
B2
33
On
20
14
/0
8/
07
Pin#
B5
GND
DE
VDD
VDD
R/L
On
ly
U/D
NC
lU
se
GND
na
7.2 LED Backlight Unit (CN2): Backlight Connector
JST
Connector Model Number
SM06B-SRKS-G-TB (HF)
Mating Connecter Model Number
JST SHR-06V-BKHF-B or compatible
VLED
2
VLED
3
GND
ET
Fo
rA
VN
1
Pin #
Symbol
4
GND
5
PWM DIM
6
LED ON/OFF
Co
nf
id
en
tia
l
Symbol
AU
O
Pin #
In
te
r
Manufacturer
G057VTN01.1 Ver. 1.
18/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
7.3 LED Light Bar Input (CN3): Light Bar Connector
Manufacturer
JST
Connector Model Number
SM06B-SHLK-GTF(HF)
Mating Connecter Model Number
SM06B-SHLS-TF or compatible
Symbol
Pin Description
Cable color
1
AN1
Channel 1 LED anode
Red
2
AN2
Channel 2 LED anode
Red
3
AN3
Channel 3 LED anode
Red
4
CA1
Channel 1 LED cathode
White
5
CA2
Channel 2 LED cathode
Blue
6
CA3
Channel 3 LED cathode
Black
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
On
20
14
/0
8/
07
Pin #
G057VTN01.1 Ver. 1.
19/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
8. Reliability Test Criteria
Items
Temperature Humidity Bias
Required Condition
Remark
40℃/90%,300Hr
Note 2
Note 2
Low Temperature Operation
-30℃,300Hr
Note 2
High Temperature Storage
85℃,300 hours
Note 2
Low Temperature Storage
-30℃,300 hours
Note 2
Thermal Shock Test
-20℃/30 min ,60℃/30 min ,100cycles
Note 2
Hot Start Test
85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times
Note 2
Cold Start Test
-30℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times
Shock Test
(Non-Operating)
50G,20ms,Half-sine wave, (±X, ±Y, ±Z)
Vibration Test
(Non-Operating)
Sine wave:1.5G, 10~200~10Hz/Sine wave, 30mins/axis
On
20
14
/0
8/
07
High Temperature Operation 85℃,300Hr
Note 2
Note 2
Contact Discharge: ±8KV, 150pF(330Ω) 1sec, 8 points, 25 times/point
ESD
Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs
Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs
On
ly
Air Discharge: ±15KV, 150pF(330Ω) 1sec, 8 points, 25 times/point
Attitude Test
Note 2
Note 1,2
Note 2
is self-recoverable, no data lost and no hardware failures after test.
na
Note2:
lU
se
Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module
In
te
r
Water condensation is not allowed for each test items.
Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.
The reliability test is performed only to examine the TFT-LCD module capability.
ET
To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
hours at least in advance.
G057VTN01.1 Ver. 1.
20/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
9. Mechanical Characteristics
Co
nf
na
G057VTN01.1
On
20
14
/0
8/
07
On
ly
21/23
G057VTN01.1 Ver. 1.
lU
se
te
r
In
ET
Fo
rA
VN
tia
l
id
en
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
AU
O
www.avnet-embedded.eu
G057VTN01.1
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
On
20
14
/0
8/
07
G057VTN01.1
10.2 Carton Package
Max. capacity: 60 pieces TFT-LCD module per carton
Max. weight: 12.95 kg per carton
Box stacked:
Co
nf
id
en
tia
l
Fo
rA
VN
ET
In
te
r
na
lU
se
On
ly
Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm
AU
O
Module by air:(2 *3) *5 layers,one pallet put 30 boxes,total 1800pcs module
Module by sea:(2 *3) *5 layers + (2 *3) *2 layers , two pallet put 42 boxes,total 2520pcs module
Module by sea HQ:(2 *3) *5 layers+(2 *3) *3 layers, two pallet put 48 boxes, total 2880pcs module
G057VTN01.1 Ver. 1.
22/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
G057VTN01.1
11 Safety
11.1 Keen Edge Requirements
There will be no keen edges or corners on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will
be reviewed and approved by the responsible AUO toxicologist.
On
20
14
/0
8/
07
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD
Module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be
printed on the printed circuit board.
On
ly
11.3 Capacitors
If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being
lU
se
inserted backwards.
na
11.4 National Test Lab Requirement
In
te
r
The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology
AU
O
Co
nf
id
en
tia
l
Fo
rA
VN
ET
Equipment).
G057VTN01.1 Ver. 1.
23/23
For AVNET Internal Use Only - Provided By pavelkonvalinka On 2014/08/07
www.avnet-embedded.eu
Avnet Embedded Offices
DACH (Germany, Austria, Switzerland)
c/o MSC Technologies GmbH
Industriestrasse 16
76297 Stutensee, Germany
Phone: +49 7249 910 - 0
info@msc-technologies.eu
Denmark
Avnet Embedded
Avnet Nortec A/S
Lyskær 9
2730 Herlev
Avnet Embedded
Avnet EMG France SA
Les Peupliers II
35 avenue des Peupliers
35510 Cesson-Sévigné
Phone: + 33 2 99 77 37 02
Fax: + 33 2 99 77 37 01
rennes@avnet-embedded.eu
Avnet Israel
1st Avnet Road
4065001 Tel Mond
Phone: +972 54 5206354
daniel.katz[at]avnet.eu
Phone: +45 3678 6250
Fax: +45 3678 6255
denmark@avnet-embedded.eu
Finland
Avnet Embedded
Avnet Nortec Oy
Pihatörmä 1 B
Italy
Avnet Embedded
Avnet EMG Italy SRL
Via Manzoni, 44
20095 Cusano Milanino
Phone: +39 02 660 92 1
Fax: +39 02 660 92 498
milano@avnet-embedded.eu
Sweden (Norway)
Avnet Embedded
Avnet Nortec AB
Löfströms Allé 5
172 66 Sundbyberg
Phone: +46 8 587 46 400
Fax: +46 8 587 46 001
sweden@avnet-embedded.eu
United Kingdom (Ireland)
Avnet Embedded
5a Waltham Park
White Waltham
Maidenhead
Berkshire, SL6 3TN
Phone: +44 1628 518900
Fax: +44 1628 518901
uk@avnet-embedded.eu
02240 Espoo
Phone: +358 20 749 9 260
Fax: +358 20 749 9 280
finland@avnet-embedded.eu
France
Avnet Embedded
Avnet EMG France SA
Parc Club du Moulin à Vent, Bât 10
33, rue du Dr Georges Lévy
69693 Vénissieux Cedex
Phone: +33 4 78 77 13 92
Fax: +33 4 78 77 13 97
bron@avnet-embedded.eu
Avnet Embedded
Avnet EMG France SA
14 avenue Carnot
91349 Massy Cedex
Phone: +33 1 64 47 29 29
Fax: +33 1 64 47 99 99
paris@avnet-embedded.eu
South Africa
Avnet South Africa (Johannesburg)
Block 3, Pinewood Office Park,
33 Riley Road, Woodmead
P.O. Box 3853, Rivonia, 2128, South Africa
Phone: +27 11 319 8600
Fax: +27 11 319 8650
sales@avnet.co.za
Avnet South Africa (Cape Town)
Ground Floor, Forrest House, Belmont Office Park,
14 Belmont Road, Rondebosch
P.O. Box 13004, Mowbray, 7705, South Africa
Phone: +27 21 689 4141
Fax: +27 21 686 4709
sales@avnet.co.za
Avnet South Africa (Durban)
202 Clemsford, 2nd, Essex Gardens, Nelson Road,
Westville
P.O. Box 1428, Wandsbeck, 3630, South Africa
Phone: +27 31 266 8104
Fax: +27 31 266 1891
sales@avnet.co.za
www.avnet-embedded.eu
All trademarks and logos are the property of their respective owners. No guarentee as to the accuracy, completeness or reliability of any information.
Subject to modifications and amendments.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising