Especificações MX225
MX225
The
Server
SERVIDOR
ITAUTEC MX225 is ideal for
Enterprise Class. It has High
Efficiency,
Secure
and
High
Performance, it is recommended to
Medium and Large companies.
The model MX225 is based
on newest Intel® Xeon™ family
processors series E5-2600 with up
to 8 cores with memory controller
embedded, Dual Processor.
It uses high performance
memories based on DDR3 up to
1600MHz. In addition it has high
capacity memory with 24 slots.
It has redundant Power
supply and up to 2 add-in cards
slots. Support up to 8 HDD
SATA/SAS hot-pluggable.
Processor
Intel® Xeon™ Processor E5-2600 family
Quick Path Interconnect(QPI): up to 8,0 GT/s
Cache L 3: 10MB to 20MB (depend of the processor PN)
Quantidade: 2 processors (4, 6 or 8 Cores - depend of the processor PN)
Encapsulamento: LGA2011
Chipset
Intel® C600-A
Memory
Technology: DIMM DDR3 SDRAM ECC
Capacity: Up to 768GB Registered
Clock: 1600MHz (PC12800), 1333MHz (PC10600), 1066MHz (PC8500) and 800MHz
(PC6400)
Slots: 24 slots of 240 pinos
Modules: 2GB; 4GB; 8GB; 16GB and 32GB
Errors Corrections:
ECC (Detect single errors and doubles, correct single errors)
Memory Sparing
Memory Mirroring (minimum qty is requested)
PCI-e Slots
Total: 6 slots
Riser1 and 2 : 2 FHFL PCI-e x8 Gen3 + 1 FHHL PCI-e x8 Gen3
BIOS
Memory Capacity: 256Mb Flash EEPROM
Features:
- UEFI
- Atualização por software
- Disaster Recovery
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 3.0
- ACPI 1.0/ 2.0
Serial ATA Controller
(Built-in)
Chipset: Intel C600-A
Ports: 6 ports
Standard: SATA3 (6Gb/s) and SATA2 (3 Gb/s)
Devices: 2 in SATA3(AHCI) and 6 in SATA2(SCU)
Video Controller
(VGA built-in)
Chipset: Intel C602-A(embedded BMC)
Memory: 16MB DDR3
Bus: PCI-e 1.0
Resolution 2D: 1600x1200 / 32bits à 66Hz
USB Controller
(built-in)
LAN
(Built-in)
Tecnology: USB2.0 / USB 1.1
Ports: 6 port (2 in front panel + 3 rear + 1 internal Type-A)
Port 1 / Port 2 / Port 3 / Port 4
Chipset: 1 x Intel® I350
Ports: Quad
Speed: 10Mbits/s, 100Mb/s and 1000Mb/s Autosense
Standards:
- 10BASE-T, 100BASE-TX and 100BASE-T
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.1Q VLAN
- WOL (Wake On LAN)
- Boot via PXE 2.1
2012 Itautec S.A. – Techincal Specification - Servidor Itautec MX225
2
I/O Connections
RAID Controller
(Optional Module)
Hard Drives
-
4
3
1
1
1
1
NIC standard RJ45 1Gb/s
USB 2.0/1.1 on rear
USB 2.0/1.1 by front panel
VGA standard DB-15
DH-10 internal connector to Serial-B
RJ-45 connector to Serial-A
8 internal Ports SAS
Standard: SAS2 3.0Gb/s
Memory Cache: 1GB(DDR3)
Internal Ports: Up to 8 ports SAS
Bus PCI: PCI-Express x8
Battery: Yes(optional)
RAID modes: 0, 1,10, 5, 50, 6 and 60
Form Factor: Intel proprietary (daughter card)
8 internal Ports SATA
Standard: SATA3 6.0Gb/s
Memory Cache: 512MB(DDR3)
Internal Ports: Up to 8 ports SATA
Bus PCI: PCI-Express x8
Battery: Yes(optional)
RAID modes: 0, 1,10, 5, 50, 6 and 60
Form Factor: Intel proprietary (daughter card)
SATA Hard Drive
Quantity: Up to 8 hot-plug HD or 16 with additional cage
Connection: By backplane
Tecnology: SATA 3.0Gb/s or 6.0Gb/s
Speed: 7200rpm
Cache: 16MB ou 32MB ou 64MB
Capacity: 160GB, 320GB, 500GB, 750GB and 1TB
Formato: 2.5”
SAS Hard Drive
Quantity: Up to 8 hot-plug HD or 16 with additional cage
Connection: By backplane
Tecnology: SAS 3.0Gb/s or 6.0Gb/s
Speed: 7200rpm, 10000rpm and 15000rpm
Cache: 16MB ou 32MB ou 64MB
DVD-ROM
Read Speed: 48X max (CD), 16X max (DVD)
Interface: SATA
Access Time: 120ms
Cache: 256kB
Optical Device
(optional)
DVD-RW
Speed:
Read DVD: 16X max
Read CD-ROM: 48X max
Write DVD: 48X max
Write: 20X max
Interface: SATA
Cache: 2MB
CD-ROM: 1X = 150KB/s ; DVD-ROM 1X=1350KB/s
2012 Itautec S.A. – Techincal Specification - Servidor Itautec MX225
3
Chassis
Cooling System
Power Supply
Form Factor: rack 2U
Bays 2 1/2" to HD: 8 hot-plug or 16(with additional cage)
Features HW:
- Power Button w/integrated LED
- System Cold Reset Button
- NMI Button (recessed, tool required for use)
- System ID Button w/integrated LED
- 4 LEDs (NIC-1, NIC-2, NIC-3 and NIC-4) activity LED
- 1 LED System Status
- 1 LED Hard Drive activity
- Rail kit (with optional Full Extension/tooless rail kit and Cable Management arm, too Full-rail)
Dimensões (LxAxP): 438mm x 87mm x 696mm
In the chassis: 5 x 80mm Fans
Power Supply Fan: 1 x 40mm (for each module)
Características: System cooling redundant and hot-swap
Power: 750Watts
AC Voltage: 100 to 240V (automatic), 50/60Hz, 8,5A – 3,8A
Features:
- High Efficiency (Platinum)
- PFC Active (Power Factor Correction)
- Automatic AC Voltage selection range
Security
- Chassis intrusion
Monitoring
- DC voltages (+5V, +12V, +3,3V, +5Vsb, Vcore)
- Temperature System and Processors
- Fans rotation
Chassis Features
(management)
Management
- SMBIOS
Power Management
- ACPI/ACPM
- Wake on Ring
- Wake on LAN
- Power Loss control
Operational System
(Optional)
Red Hat RHEL6.2 for i386 and x86_64
Suse Enterprise 11.4
Microsoft Windows Server 2008 R2 (Hyper-V)
Environment
ROHS
80Plus Platinum
Operating
Temperature: 10ºC a 35°C
Humidity: 50% a 90% non-condensing
Specification
(environment limits)
Shipping
Temperature: -40°C a 70°C
Humidity: 50% a 95% non-condensing
Remark1: Software Support Services optional
Remark2: the pictures are only for illustrate proposal
Itautec S.A. can change anything without notice.
June/2012 – Rev. 01
www.itautec.com.br
2012 Itautec S.A. – Techincal Specification - Servidor Itautec MX225
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising