The Most Advanced Collet Chucks Available for Today’s CNC Lathes

The Most Advanced Collet Chucks Available for Today’s CNC Lathes
ROYAL QUICK-GRIP™ CNC COLLET CHUCKS
The Most Advanced Collet Chucks
Available for Today’s CNC Lathes
3 Ten-Second Collet Changes Slash Setup Times
3 Industry-Leading Gripping Range – 0.062"
3 Ultra-Precision Accuracy – 0.0002" TIR Guaranteed
3 Extreme Grip Force = Most Aggressive Chip
Removal/Fastest Cycle Times
3 Maximum Rigidity Produces Superior Part Finishes
3 Best Tool Clearance – Critical For Live Tooling
Proudly
Made
in U.S.A.
Big Benefit #1 Ten-Second Collet Changes
With the Royal Quick-Grip™ CNC Collet Chuck, collet changes take just seconds. Here’s how it works:
1. The unique collets are constructed of hardened steel segments
securely joined together by vulcanized rubber. Each collet
contains an annular hook and groove configuration on the
rear section of its outer diameter.
6
2. The installation tool incorporates steel pins that align with
drilled holes on the collet face. When these pins engage the
face holes and the trigger on the tool is actuated, the
collet becomes temporarily compressed.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP™ CNC COLLET CHUCKS
3. In its compressed state, the collet can then be inserted into the
collet chuck, where the hooks on the rear of the collet segments
become axially aligned with a retaining groove in the chuck.
4. Releasing the installation tool allows the collet to spring open,
seating the hooks in the groove and drawing the matching ID/OD
tapers into full, positive contact. The collet is now installed.
REDUCE SETUP TIME = GREATER THROUGHPUT AND HIGHER PROFITS!
Big Benefit #2 Ultra-Precision Accuracy – 0.0002" or Better
While many users purchase the Royal Quick-Grip™ CNC Collet Chuck for its lightning-fast collet changes and wide gripping range, another major benefit
of this system is its extreme accuracy.
With CNC collet chucks, there are several factors which affect overall system accuracy. These include:
– Accuracy and tolerance of chuck mount (taper angle, gage line diameter, squareness of mounting flange, etc)
– Tolerance and fit between chuck components (body to mounting adapter, closing sleeve to chuck bore, etc.)
– Accuracy and tolerance of collets (OD collet angle, bore sizing, concentricity of ID to OD, etc.)
The manufacturing processes for Royal CNC collet chucks and collets have all been fully optimized to achieve the absolute tightest tolerances and highest
accuracies. While we guarantee our chucks at 0.0002" TIR between the A-mount taper and collet chuck closing sleeve, they often run at 0.00005" or
better! Round-bore collet accuracy is also guaranteed to be within 0.0002" TIR.
This means that out of the box, with absolutely no indicating in, you can expect to achieve a Quick-Grip™ total system accuracy of 0.0004" TIR or better.
We know of no other collet chuck manufacturer that can consistently produce such an exact level of precision.
How much time do you waste boring jaws? The Royal Quick-Grip™ pays for itself in no time.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
7
QUICK-GRIP™ CNC COLLET CHUCKS
Big Benefit #3 Industry-Leading Gripping Range – 0.062"
Spring-Type Collet
Quick-Grip Collet
With a spring-type collet, unless the
bore is exactly sized to the workpiece
diameter there will be reduced
contact, resulting in compromised
accuracy and grip force.
With a Quick-Grip™ collet, the segments
always remain parallel to the workpiece,
helping to maintain optimum accuracy
and grip force.
Advantages of this system include:
Royal Quick-Grip™ Collets have a much wider collapse range than
conventional spring collets. A spring-type collet can only be
compressed by up to 0.005" before there is a sharp drop off in both grip
force and accuracy due to the changing angle of the gripping surface.
However, with the unique design of the Quick-Grip™ collet, each collet
segment is joined to the adjacent segments with vulcanized rubber. This
ensures that the collet segments always remain parallel to the
workpiece as the collet is compressed, giving the Quick-Grip™ collet a
full collapse range of .062" (nominal diameter +/- .031).
q The ability to compensate for oversized and undersized bar stock.
q Superior accuracy and grip force – by remaining parallel to the
workpiece, each collet segment makes contact over its entire length.
With a spring-type collet, over-collapsing results in just a narrow ring
of contact near the collet face.
q On secondary operations, the wide range of the Royal Quick-Grip™
collet provides the ability to clear larger diameters in order to grip
on smaller diameters.
Big Benefit #4 Slash Cycle Times and Boost Throughput
Royal Quick-Grip™ Offers Unmatched Grip Force and Rigidity
The parallel-grip functionality of Royal Quick-Grip™ Collets provides extremely high grip force by maintaining workpiece contact over the entire length of
each collet segment (see image above). Additionally, the design and construction of all Royal Quick-Grip™ CNC Collet Chucks has been optimized for rocksolid rigidity.
This combination of tremendous grip force and outstanding rigidity results in something that every manufacturer strives for – the ability to drastically
increase speeds, feeds and depth of cut, without sacrificing part accuracy or surface finish.
Exceptional Grip Force and Rigidity
More Aggressive Chip Removal Rates
Faster Cycle Times
Increased Throughput
More Aggressive Chip Removal Rates
Faster Cycle Times
Increased Throughput
Higher Profits
Many Royal Quick-Grip™ users have told us that they have made back their investment in just a few short weeks thanks to such a
significant increase in throughput over their previous three-jaw chucks and older-style collet chucks.
8
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP™ CNC COLLET CHUCKS
Big Benefit #5 Most Compact Collet Chucks in the Industry
Royal Accu-Length™ CNC Collet Chucks have been optimized for tool clearance and rigidity. Short lengths maximize the usable space inside the
machining envelope, while extremely compact nose diameters reduce tool interference and enable machining to take place closer to the spindle.
Compact
Ultra-Compact
(Standard Length/Compact Nose Diameter)
The traditional length ensures that these chucks
can accommodate most machine drawtubes,
while a greatly reduced nose diameter offers
the best tool clearance in the industry.
(Compact Length/Compact Nose Diameter)
These are the smallest collet chucks available.
Often mounted on sub-spindles, Royal's
Ultra-Compact CNC Collet Chucks make a great
choice when maximum z-axis capacity is the
primary requirement.
Big Benefit #6 Exclusive Royal Bolt and Go™ Mounting Advantage
All Royal CNC Collet Chucks mount quickly, easily, and accurately due to our exclusive Bolt & Go™ mounting interface.
Royal
Others
Many Royal chuck models mount directly to the lathe spindle without the need for an adapter plate. However, for
models that do use a plate, a precision–ground tapered fit between the plate’s male pilot and chuck body’s female
recess ensures a consistent, near-perfect fit without the need for any adjustment. This precision fit also
enhances overall system rigidity by providing both face and taper contact.
Other chuck manufacturers use a less precise approach. Instead of providing a near-perfect tapered interface
between the chuck body and plate, they rely on a loose fit between a male cylindrical pilot on the plate and
an oversized bore within the chuck body. Because there is clearance between these two components, jack screws
located around the circumference must be used to radially true-up the chuck on the plate. This process of using the
jack screws and an indicator to dial out the runout each time a chuck is mounted wastes valuable production time.
The rigidity of this design is also significantly less due to the limited point-contact provided by the screws against the
pilot as compared to the full-contact tapered fit of the Royal Bolt & Go™ interface.
Full Face &
Taper Contact
Jack Screw
Point Contact
Knock 30 Minutes Off Your Setup Time with Royal Bolt & Go™
Big Benefit #7 Risk-Free Performance Guarantee
In addition to providing superior quality, service, support, and deliveries, Royal CNC Collet Chucks also carry an
industry exclusive risk-free performance guarantee. This no-risk guarantee allows our customers to run a collet
chuck on the toughest jobs in their shop for 45-days, and if they are not 100% satisfied with its performance,
we will take it back and arrange for a full refund through their distributor.
When you buy a CNC collet chuck from Royal Products, you can have complete confidence that we will not
let you down. For over 65 years, Royal has been recognized as one of the most reliable and trusted suppliers
in the metalworking industry. We’re here for you today, and we’ll be here for you tomorrow.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
9
QUICK-GRIP™ ACCU-LENGTH™
CNC COLLET CHUCKS
Bolt & Go™
Our exclusive Bolt & Go™ mounting feature is
standard on all Royal Quick-Grip™ Collet Chuck
models. Bolt & Go™ enables chucks to be
mounted very quickly and ensures maximum
accuracy and rigidity. See page 9 for
additional information.
Extremely Fast Collet Changes
Changing collets on a Royal Quick-Grip™ CNC
Collet Chuck takes just a few seconds. A
unique hook and groove design for securing
collets is used instead of traditional threads.
Wide Gripping Range
Royal Quick-Grip™ Collets have a .062"
gripping range (+/- 0.031"), allowing
them to accommodate undersized and
oversized bar stock.
High Accuracy
Royal Quick-Grip™ CNC Collet Chucks
are very accurate – runout on the closing
angle is guaranteed to be within 0.0002" TIR.
Completely Sealed
Lubricated for life, these chucks
incorporate multiple O-ring
seals to keep contaminants out
and prevent chip pack-up on
bore-thru applications.
Low-Profile
Royal Quick-Grip™ CNC Collet
Chucks have smaller nose
diameters than other quickchange collet chucks for
superior tool clearance.
High RPM
All Royal Quick-Grip™ Collet Chucks
are balanced by design for high-speed
operation, and can often be run at
higher speeds than conventional 3-jaw
chucks because they are less affected
by centrifugal force.
Collet Compatibility
Royal Quick-Grip™ Collet
Chucks can also utilize some
other brands of quick-change
collets. Call us to verify.
Proudly
Made
in U.S.A.
Three Keys
All Royal Quick-Grip™ CNC
Collet Chucks incorporate
three anti-rotation keys for
precise C-axis orientation.
Shortest Length
Royal Quick-Grip™ CNC Collet Chucks are
among the shortest chucks available,
providing maximum work envelope utilization.
This is especially important for smaller
machines with limited z-axis travel.
Heavy-Duty Construction
All chuck components, except for the
drawtube connector, are hardened to
Rc 61-63 for high rigidity and durability.
Dead-Length Operation
Royal Quick-Grip™ Accu-Length™ CNC
Collet Chucks incorporate dead length
operation to eliminate part pullback. With
this design, the collet is held stationary in
the chuck body and a tapered sleeve pushes
forward to compress it, resulting in precise
z-axis workpiece positioning.
Easy Installation
Royal Quick-Grip™ Collet Chucks include all
mounting hardware, mounting wrenches, and
a custom-machined drawtube connector to
ensure hassle-free installation.
Specials
If you have a special application that goes beyond
the scope of our standard line, we will be happy to
design and build a custom system to meet your
needs. Please contact a Royal applications engineer
to discuss your requirements.
Note: Collets sold separately
10
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP™ ACCU-LENGTH™
CNC COLLET CHUCKS
3
3
3
3
3
Proudly
Made
in U.S.A.
E
10-Second Collet Changes
Widest Collet Gripping Range (.062")
Extremely Accurate – 0.0002" TIR
Parallel Workpiece Gripping
Compact and Ultra-Compact models to
suit all machines and applications
E
BD
A
C
A
Compact
(Standard Length/
Compact Diameter)
NEW
BD
C
Ultra-Compact
(Compact Length/
Compact Diameter)
Royal Quick-Grip™ Accu-Length™ CNC Collet Chucks
SPINDLE
TYPE
COLLET
TYPE
CAPACITY
CHUCK
STYLE
A
OVERALL
LENGTH
B
NOSE
DIAMETER
C
NOSE
LENGTH
A2-5
QG-42
58
1⁄"
Compact
4.60
3.86
0.98
5.70
6.45
A2-5
QG-42
58
1⁄"
Ultra-Compact
4.00
3.86
0.98
5.70
A2-6
140 MM
A2-5
A2-5
A2-6
A2-6
A2-8
80 MM
110 MM
140 MM
A2-5
A2-6
A2-8
140 MM
A2-6
A2-8
A2-11
QG-42
QG-42
QG-65
QG-65
QG-65
QG-65
QG-65
QG-65
QG-65
QG-65
QG-80
QG-80
QG-80
QG-80
QG-100
QG-100
QG-100
1⁄"
1 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
3 1⁄ 4"
3 1⁄ 4"
3 1⁄ 4"
3 1⁄ 4"
4"
4"
4"
Ultra-Compact
Ultra-Compact
Compact
Ultra-Compact
Compact
Ultra-Compact
Compact
Ultra-Compact
Ultra-Compact
Ultra-Compact
Compact
Compact
Compact
Compact
Compact
Compact
Compact
4.45
3.95
4.80
4.50
5.33
4.65
5.50
4.65
4.45
4.80
4.95
4.95
5.20
4.75
6.18
6.43
6.68
3.86
3.86
4.69
4.69
4.69
4.69
4.69
4.69
4.69
4.69
5.35
5.35
5.35
5.35
6.62
6.62
6.62
0.98
0.98
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.87
0.87
0.87
6.20
5.70
6.45
6.45
6.45
6.45
8.00
6.45
6.45
6.45
7.45
7.45
8.00
7.45
9.40
9.40
9.40
58
D
E
CHUCK
BODY
FLANGE WEIGHT
DIAMETER DIAMETER (lbs.)
MAX
DRAWBAR
FORCE (lbs.)
MAX
CLAMPING
FORCE (lbs).
15
7,865
17,980
6,000 44055 $3,260
6.45
13
7,865
17,980
6,000 44051 3,260
7.25
5.70
7.25
7.25
7.25
7.25
9.45
7.25
6.45
7.45
7.45
7.45
9.45
7.45
10.75
10.75
12.50
17
13
19
18
23
18
37
19
17
25
28
28
31
28
84
86
88
7,865
7,865
10,115
10,115
10,115
10,115
10,115
10,115
10,115
10,115
11,240
11,240
11,240
11,240
14,610
14,610
14,610
17,980
17,980
23,600
23,600
23,600
23,600
23,600
23,600
23,600
23,600
25,850
25,850
25,850
25,850
33,720
33,720
33,720
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
MAX
RPM
PART
NUMBER
44053
44057
44065
44061
44067
44063
44068
44075
44076
44069
44074
44071
44073
44059
44077
44078
44079
PRICE*
3,260
3,260
3,680
3,680
3,680
3,680
4,160
4,030
4,030
4,030
4,270
4,270
4,270
4,270
5,260
5,380
6,820
* Collets sold separately.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
11
QUICK-GRIP™ PULLBACK
CNC COLLET CHUCKS
B D
E
Proudly
Made
in U.S.A.
C
A
q Traditional pullback design – collet is pulled into chuck to close, pushed out to open.
q No collet stop capability, therefore this chuck style is typically used only on jobs where holding precise axial
position is not critical.
q Includes many of the same features of our QG Accu-Length™ models, including:
– 10-second collet changes
– 0.0002" TIR accuracy on closing angle
– Wide 0.062" collet range
– Compact dimensions for superior clearance
Royal Quick-Grip™ Pullback CNC Collet Chucks
SPINDLE
TYPE
COLLET
TYPE
CAPACITY
A
OVERALL
LENGTH
B
NOSE
DIAMETER
C
NOSE
LENGTH
D
BODY
DIAMETER
E
FLANGE
DIAMETER
CHUCK
WEIGHT
(lbs.)
MAX
DRAWBAR
FORCE (lbs.)
MAX
CLAMPING
FORCE (lbs).
MAX
RPM
PART
NUMBER
PRICE*
A2-5
QG-42
58
1⁄"
4.45
4.11
3.50
5.25
6.45
11
7,865
17,980
6,000
44020
$2,000
A2-6
A2-5
A2-6
A2-8
A2-6
A2-8
QG-42
QG-65
QG-65
QG-65
QG-80
QG-80
1⁄"
2 5⁄ 8"
2 5⁄ 8"
2 5⁄ 8"
3 1⁄ 4"
3 1⁄ 4"
4.35
4.30
4.85
5.00
4.85
5.00
4.11
4.88
4.88
4.88
5.47
5.47
1.50
1.50
1.50
1.50
1.25
1.25
4.38
6.45
5.25
5.72
5.68
5.72
7.45
6.45
7.45
9.45
7.45
9.45
13
19
17
25
25
25
7,865
10,115
10,115
10,115
11,240
11,240
17,980
23,600
23,600
23,600
25,850
25,850
6,000
6,000
6,000
6,000
5,000
5,000
44022
44028
44030
44032
44034
44036
2,150
58
* Collets sold separately.
Check out the Royal Quick-Grip™ CNC Collet
Chuck Video at www.colletchucks.com
12
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
2,270
2,270
2,810
2,870
2,870
QUICK-GRIP™ PULL-TO-A-STOP
CNC COLLET CHUCKS
NEW
Proudly
Made
in U.S.A.
B D
E
A
C
Chuck includes
standard stop.
q Incorporates many of the same features as our Accu-Length™ Quick-Grip™ CNC Collet Chucks, except that the collet is not fixed – it moves
axially upon opening and closing.
q Able to accept QG standard and extra-depth stop assemblies for locating parts.
q This chuck is ideal for high-volume, robot-load applications in which the part needs to locate against a shoulder and air-sensing / position
confirmation is required.
q A great choice for any CNC lathe equipped with a servo-driven bar feeder.
q Can be used either with or without the internal stop for both first and second-operations.
q Standard collet stop assembly included with chuck.
Royal Quick-Grip™ Pull-to-a-Stop CNC Collet Chucks
SPINDLE
TYPE
COLLET
TYPE
CAPACITY
A
OVERALL
LENGTH
B
NOSE
DIAMETER
C
NOSE
LENGTH
D
BODY
DIAMETER
E
FLANGE
DIAMETER
CHUCK
WEIGHT
(lbs.)
MAX
DRAWBAR
FORCE (lbs.)
MAX
CLAMPING
FORCE (lbs).
MAX
RPM
PART
NUMBER
PRICE*
A2-5
QG-42
58
1⁄"
5.10
3.54
0.62
6.00
6.70
21
7,865
17,980
6,000
46010
$2,790
A2-6
QG-42
58
1⁄"
5.50
3.54
0.62
6.25
7.45
25
7,865
17,980
6,000
46012
2,790
A2-5
A2-6
A2-8
A2-6
A2-8
A2-8
A2-11
QG-65
QG-65
QG-65
QG-80
QG-80
QG-100
QG-100
2⁄"
2 5⁄ 8"
2 5⁄ 8"
3 1⁄ 4"
3 1⁄ 4"
4"
4"
5.50
6.00
6.40
6.00
6.40
7.33
7.58
4.37
4.37
4.37
4.96
4.96
6.30
6.30
0.80
0.80
0.80
0.80
0.80
0.80
0.80
6.70
6.70
7.95
8.00
8.00
9.40
9.40
7.62
7.62
9.45
8.75
9.45
10.75
12.50
28
29
45
44
47
95
102
10,115
10,115
10,115
11,240
11,240
14,610
14,610
23,600
23,600
23,600
25,850
25,850
33,720
33,720
6,000
6,000
6,000
5,000
5,000
5,000
5,000
46014
46016
46018
46020
46022
46024
46026
3,250
58
3,250
3,250
3,580
3,580
3,850
4,170
* Includes standard stop assembly. Collets sold separately.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
13
QUICK-GRIP™ CNC COLLET CHUCK
ACCESSORIES
Quick-Grip™ Standard Stops
q A stop is used for accurate z-axis positioning
q All Royal stops can be installed with chuck mounted to the spindle.
of short workpieces within a collet.
q For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™
q Stop rod length is easily adjusted.
Collet Chuck models.
q The stop locates against a shoulder within the chuck body and is
held in place with radially-located screws.
Royal Quick-Grip™ Standard Stops
FITS
CHUCK
MODEL
QG-42
QG-65
QG-80
QG-100
MAX THROAT DEPTH*
ACCU-LENGTH
PULL-TO-A-STOP
CHUCK MODELS
CHUCK MODELS
2.03
2.47
2.51
2.71
2.89
3.33
3.33
3.65
PART
NUMBER
PRICE
44080
44081
44084
44816
$180
205
233
265
* Measured from collet face.
Quick-Grip™ Extra-Depth Stops
q A stop is used for accurate z-axis positioning of a workpiece within a collet.
q Royal Quick-Grip™ extra-depth stops have a greater throat depth than our standard stops, enabling
longer parts to swallowed while minimizing protrusion beyond the collet face.
q As with our standard QG stops, rod length is easily adjusted and the entire assembly can be installed
with the chuck mounted to the spindle.
q For use with Royal Accu-Length™ and Pull-to-a-Stop Quick-Grip™ Collet Chuck models.
Royal Quick-Grip™ Extra-Depth Stops
FITS
CHUCK
MODEL
QG-42
QG-65
QG-65
QG-80
QG-80
QG-100
QG-100
MAX THROAT DEPTH*
ACCU-LENGTH
PULL-TO-A-STOP
CHUCK MODELS
CHUCK MODELS
5.00
6.00
6.00
6.00
6.00
6.00
6.00
5.86
6.86
6.86
6.82
6.82
6.94
6.94
MAX
PART
DIAMETER
MIN
DRAWTUBE
I.D.
PART
NUMBER
1.25
1.25
2.25
2.00
2.75
2.75
3.50
1.66
1.66
2.73
2.48
3.23
3.23
3.91
44802
44804
44806
44808
44810
44812
44814
* Measured from collet face.
14
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
PRICE
$319
361
361
435
435
526
526
QUICK-GRIP™ CNC COLLET CHUCK
ACCESSORIES
Quick-Grip™ Ejectors
q Ejectors are used in sub-spindle applications on Accu-Length™ Chucks to
push finished workpieces into the part catcher upon completion.
q A hardened plunger rod and a bronze bushing work together to provide
smooth, consistent operation.
q New design enables tip to be changed without removing ejector assembly
from the chuck.
Royal Quick-Grip™ Ejectors
q Available in standard and compact models:
FITS ACCU-LENGTH™
CHUCK MODEL
– Standard Model – for parts ranging in size from 0.81" to 4.00" dia.
– Compact Model – for parts ranging in size from 0.18" to 1.50" dia.
QG-42
QG-65
QG-80
QG-100
QG-42
QG-65
QG-80
QG-100
q Easily customizable as workpiece configurations require.
For an alternative solution to an ejector, check out the Royal Grippex CoolantActuated Bar Puller. The Grippex, when fitted with special jaws, can be used to
pull finished parts from a sub-spindle, eliminating the need for an ejector and
freeing up the spindle bore to swallow longer parts.
EJECTOR
STYLE
PART DIAMETER
RANGE
PART
NUMBER
PRICE
Standard
Standard
Standard
Standard
Compact
Compact
Compact
Compact
0.81"– 1.63"
0.81"– 2.63"
0.81"– 3.25"
1.50"– 4.00"
0.18"– 1.25"
0.18"– 1.25"
0.18"– 1.25"
0.50"– 1.50"
44040
44041
44042
44046
44043
44044
44045
44047
$698
709
719
731
604
614
625
637
Hardened and Ground Adapter Plates
q Adapter plates offer the flexibility to mount
Proudly
Made
in U.S.A.
NEW
collet chucks and 3-jaw chucks to a wider
range of spindles:
- Mount a larger chuck on a smaller spindle
for increased capacity.
- Mount a smaller chuck on a larger spindle for
increased tool clearance and higher speeds.
q All Royal adapter plates are hardened to
Rc 61-63.
q High accuracy – 0.0002" TIR guaranteed.
q Metric screws included for mounting plate
to spindle.
q Drive button included on all plates.
Royal Adapter Plates
SPINDLE
MOUNT
CHUCK
MOUNT
PLATE
DIAMETER
PLATE
THICKNESS
THRU-HOLE
DIA.
SPINDLE
MOUNTING
BOLTS
CHUCK
MOUNT
THREADS
PART
NUMBER
PRICE
A2-5
A2-6
A2-6
A2-8
A2-8
A2-11
110MM
140MM
A2-6
A2-6
A2-8
A2-6
A2-8
A2-8
A2-5
A2-6
6.68
6.68
8.68
8.25
8.69
11.00
5.31
6.68
1.00
1.25
1.00
1.75
2.00
2.00
0.75
1.00
2.63
3.56
3.75
3.44
4.76
4.76
2.00
3.00
M-10
M-12
M-12
M-16
M-16
M-20
M-10
M-10
M-12
M-12
M-16
M-12
M-16
M-16
M-10
M-12
44000
44009
44004
44010
44011
44014
44006
44008
$1,180
1,048
1,363
1,363
1,436
1,728
1,021
1,212
Other configurations available. Contact a Royal Products applications engineer at 1-800-645-4174
with your requirements.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
15
QUICK-GRIP™ COLLETS
q Royal Quick-Grip™ Collets are available from stock in both smooth
and serrated styles:
– Serrated bore collets are great for first operation work and heavy
duty roughing.
– Smooth bore collets are typically used for second operation work
to protect finished surfaces.
q All Royal Quick-Grip™ collets are designed for minimal projection
beyond the chuck face, (≤0.20"), for optimum rigidity and machine
work-zone utilization.
q Full .062" Gripping Range – wider than other quick-change collets on
the market, and more than 12x that of traditional spring collets.
q Collets are precision ground to nominal size, with a gripping range
of +/- .031".
q Hex, square, emergency, and custom sizes available – see pages 19–21.
q Royal Quick-Grip™ Collets are compatible with some other brands of
parallel-grip quick-change collets, but note that the six-slot design of the
QG-80 and QG-100 does require the use of a Royal installation tool.
Call Royal to verify compatibility.
Example – a 1/2" collet is ground to 0.500" dia., and can hold any
part ranging in size from 0.531" dia. down to 0.469" dia.
q Extremely Accurate – total system accuracy, (chuck + collet), of 0.0004"
TIR or better (round bore only).
Note – The unique six-slot design of the
Royal QG-80 and QG-100 Quick-Grip™ collets
provides increased workpiece contact over
the entire gripping range for superior gripping
torque over other brands.
q Vulcanized rubber between collet segments provides excellent sealing
protection against coolant penetration.
q State-of-the-art vulcanization process carries a lifetime guarantee
against failure.
Quick-Grip™ Collet Installation Tools
q Easy to use tools enable collets to be
changed in seconds.
q Once the collet is positioned within the
chuck, expand and release.
q Simply insert the steel pins into the
collet face holes and squeeze main
trigger to collapse collet.
q Manual model for QG-42, 65, and 80.
q Model 100 tool is pneumatically operated
and requires an air supply line.
Royal Quick-Grip Collet Installation Tools
NEW
16
FITS CHUCK MODEL
TYPE
PART NUMBER
PRICE
QG-42
QG-65
QG-80
QG-100
Manual
Manual
Manual
Pneumatic
44097
44098
44099
44374
$550
550
550
1,995
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP™ COLLETS
Royal QG-42 Round Collets – $239 Each
GROUND
DIAMETER
RANGE
SMOOTH
PART NUMBER
SERRATED
PART NUMBER
GROUND
DIAMETER
RANGE
SMOOTH
PART NUMBER
SERRATED
PART NUMBER
GROUND
DIAMETER
RANGE
⁄ "
⁄ "
14
⁄"
9 32
⁄ "
5 16
⁄ "
11 32
⁄ "
38
⁄"
13 32
⁄ "
7 16
⁄ "
15 32
⁄ "
12
⁄"
17 32
⁄ "
9 16
⁄ "
19 32
⁄ "
58
⁄"
21 32
⁄ "
0.219"– 0.157"
0.250"– 0.188"
0.281"– 0.219"
0.312"-0.250"
0.344"– 0.282"
0.375"– 0.313"
0.406"– 0.344"
0.437"– 0.375"
0.469"– 0.407"
0.500"– 0.438"
0.531"– 0.469"
0.562"– 0.500"
0.594"– 0.532"
0.625"– 0.563"
0.656"– 0.594"
0.687"– 0.625"
44101
44102
44103
44104
44105
44106
44107
44108
44109
44110
44111
44112
44113
44114
44115
44116
N/A
N/A
N/A
N/A
N/A
44155
44156
44157
44158
44159
44160
44161
44162
44163
44164
44165
⁄ "
⁄ "
34
⁄"
25 32
⁄ "
13 16
⁄ "
27 32
⁄ "
78
⁄"
29 32
⁄ "
15 16
⁄ "
31 32
⁄ "
1"
1 1⁄ 32"
1 1⁄ 16"
1 3⁄ 32"
1 1⁄ 8"
1 5⁄ 32"
0.719"– 0.657"
0.750"– 0.688"
0.781"– 0.719"
0.812"– 0.750"
0.844"– 0.782"
0.875"– 0.813"
0.906"– 0.844"
0.937"– 0.875"
0.969"– 0.907"
1.000"– 0.938"
1.031"– 0.969"
1.062"– 1.000"
1.094"– 1.032"
1.125"– 1.063"
1.156"– 1.094"
1.187"– 1.125"
44117
44118
44119
44120
44121
44122
44123
44124
44125
44126
44127
44128
44129
44130
44131
44132
44166
44167
44168
44169
44170
44171
44172
44173
44174
44175
44176
N/A
44177
N/A
44178
N/A
1 3⁄ 16"
1 7⁄ 32"
1 1⁄ 4"
1 9⁄ 32"
1 5⁄ 16"
1 11⁄ 32"
1 3⁄ 8"
1 13⁄ 32"
1 7⁄ 16"
1 15⁄ 32"
1 1⁄ 2"
1 17⁄ 32"
1 9⁄ 16"
1 19⁄ 32"
1 5⁄ 8"
1.219"– 1.157"
1.250"– 1.188"
1.281"– 1.219"
1.312"– 1.250"
1.344"– 1.282"
1.375"– 1.313"
1.406"– 1.344"
1.437"– 1.375"
1.469"– 1.407"
1.500"– 1.438"
1.531"– 1.469"
1.562"– 1.500"
1.594"– 1.532"
1.625"– 1.563"
1.656"– 1.594"
44133
44134
44135
44136
44137
44138
44139
44140
44141
44142
44143
44144
44145
44146
44147
44179
N/A
44180
N/A
44181
N/A
44182
N/A
44183
N/A
44184
N/A
44185
N/A
44186
GROUND
DIAMETER
RANGE
SMOOTH
PART NUMBER
SERRATED
PART NUMBER
1 7⁄ 8"
1 29⁄ 32"
1 15⁄ 16"
1 31⁄ 32"
2"
2 1⁄ 32"
2 1⁄ 16"
2 3⁄ 32"
2 1⁄ 8"
2 5⁄ 32"
2 3⁄ 16"
2 7⁄ 32"
2 1⁄ 4"
2 9⁄ 32"
2 5⁄ 16"
2 11⁄ 32"
2 3⁄ 8"
2 13⁄ 32"
2 7⁄ 16"
2 15⁄ 32"
2 1⁄ 2"
2 17⁄ 32"
2 9⁄ 16"
2 19⁄ 32"
2 5⁄ 8"
1.906"– 1.844"
1.937"– 1.875"
1.969"– 1.907"
2.000"– 1.938"
2.031"– 1.969"
2.062"– 2.000"
2.094"– 2.032"
2.125"– 2.063"
2.156"– 2.094"
2.187"– 2.125"
2.219"– 2.157"
2.250"– 2.188"
2.281"– 2.219"
2.312"– 2.250"
2.344"– 2.282"
2.375"– 2.313"
2.406"– 2.344"
2.437"– 2.375"
2.469"– 2.407"
2.500"– 2.438"
2.531"– 2.469"
2.562"– 2.500"
2.594"– 2.532"
2.625"– 2.563"
2.656"– 2.594"
44255
44256
44257
44279
44258
44259
44260
44261
44262
44263
44264
44265
44266
44267
44268
44269
44270
44271
44272
44273
44274
44275
44276
44277
44278
44341
N/A
44342
N/A
44343
N/A
44344
N/A
44345
N/A
44346
N/A
44347
N/A
44348
N/A
44349
N/A
44350
N/A
44351
N/A
44352
N/A
N/A
3 16
7 32
11 16
23 32
SMOOTH
SERRATED
PART NUMBER PART NUMBER
Royal QG-65 Round Collets – $293 Each
GROUND
DIAMETER
RANGE
⁄ "
⁄ "
14
⁄"
9 32
⁄ "
5 16
⁄ "
11 32
⁄ "
38
⁄"
13 32
⁄ "
7 16
⁄ "
15 32
⁄ "
12
⁄"
17 32
⁄ "
9 16
⁄ "
19 32
⁄ "
58
⁄"
21 32
⁄ "
11 16
⁄ "
23 32
⁄ "
34
⁄"
25 32
⁄ "
13 16
⁄ "
27 32
⁄ "
78
⁄"
29 32
⁄ "
15 16
⁄ "
31 32
⁄ "
1"
0.219"– 0.157"
0.250"– 0.188"
0.281"– 0.219"
0.312"– 0.250"
0.344"– 0.282"
0.375"– 0.313"
0.406"– 0.344"
0.437"– 0.375"
0.469"– 0.407"
0.500"– 0.438"
0.531"– 0.469"
0.562"– 0.500"
0.594"– 0.532"
0.625"– 0.563"
0.656"– 0.594"
0.687"– 0.625"
0.719"– 0.657"
0.750"– 0.688"
0.781"– 0.719"
0.812"– 0.750"
0.844"– 0.782"
0.875"– 0.813"
0.906"– 0.844"
0.937"– 0.875"
0.969"– 0.907"
1.000"– 0.938"
1.031"– 0.969"
3 16
7 32
SMOOTH
SERRATED
PART NUMBER PART NUMBER
44201
44202
44203
44204
44205
44206
44207
44208
44209
44210
44211
44212
44213
44214
44215
44216
44217
44218
44219
44220
44221
44222
44223
44224
44225
44226
44227
N/A
N/A
N/A
N/A
N/A
44306
44307
44308
44309
44310
44311
44312
44313
44314
44315
44316
44317
44318
44319
44320
44321
44322
44323
44324
44325
44326
44327
GROUND
DIAMETER
RANGE
1 1⁄ 32"
1 1⁄ 16"
1 3⁄ 32"
1 1⁄ 8"
1 5⁄ 32"
1 3⁄ 16"
1 7⁄ 32"
1 1⁄ 4"
1 9⁄ 32"
1 5⁄ 16"
1 11⁄ 32"
1 3⁄ 8"
1 13⁄ 32"
1 7⁄ 16"
1 15⁄ 32"
1 1⁄ 2"
1 17⁄ 32"
1 9⁄ 16"
1 19⁄ 32"
1 5⁄ 8"
1 21⁄ 32"
1 11⁄ 16"
1 23⁄ 32"
1 3⁄ 4"
1 25⁄ 32"
1 13⁄ 16"
1 27⁄ 32"
1.062"– 1.000"
1.094"– 1.032"
1.125"– 1.063"
1.156"– 1.094"
1.187"– 1.125"
1.219"– 1.157"
1.250"– 1.188"
1.281"– 1.219"
1.312"– 1.250"
1.344"– 1.282"
1.375"– 1.313"
1.406"– 1.344"
1.437"– 1.375"
1.469"– 1.407"
1.500"– 1.438"
1.531"– 1.469"
1.562"– 1.500"
1.594"– 1.532"
1.625"– 1.563"
1.656"– 1.594"
1.687"– 1.625"
1.719"– 1.657"
1.750"– 1.688"
1.781"– 1.719"
1.812"– 1.750"
1.844"– 1.782"
1.875"– 1.813"
SMOOTH
SERRATED
PART NUMBER PART NUMBER
44228
44229
44230
44231
44232
44233
44234
44235
44236
44237
44238
44239
44240
44241
44242
44243
44244
44245
44246
44247
44248
44249
44250
44251
44252
44253
44254
N/A
44328
N/A
44329
N/A
44330
N/A
44331
N/A
44332
N/A
44333
N/A
44334
N/A
44335
N/A
44336
N/A
44337
N/A
44338
N/A
44339
N/A
44340
N/A
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
17
QUICK-GRIP™ COLLETS
Royal QG-80 Round Collets* – $499 Each
GROUND
DIAMETER
RANGE
SMOOTH
PART NUMBER
SERRATED
PART NUMBER
GROUND
DIAMETER
RANGE
⁄"
⁄ "
38
⁄"
7 16
⁄ "
12
⁄"
9 16
⁄ "
58
⁄"
11 16
⁄ "
34
⁄"
13 16
⁄ "
78
⁄"
15 16
⁄ "
1"
1 1⁄ 16"
1 1⁄ 8"
1 3⁄ 16"
1 1⁄ 4"
0.281"– 0.219"
0.344"– 0.282"
0.406"– 0.344"
0.469"– 0.407"
0.531"– 0.469"
0.594"– 0.532"
0.656"– 0.594"
0.719"– 0.657"
0.781"– 0.719"
0.844"– 0.782"
0.906"– 0.844"
0.969"– 0.907"
1.031"– 0.969"
1.094"– 1.032"
1.156"– 1.094"
1.219"– 1.157"
1.281"– 1.219"
44403
44405
44407
44409
44411
44413
44415
44417
44419
44421
44423
44425
44427
44429
44431
44433
44435
N/A
N/A
N/A
44509
44511
44513
44515
44517
44519
44521
44523
44525
44527
44529
44531
44533
44535
1 5⁄ 16"
1 3⁄ 8"
1 7⁄ 16"
1 1⁄ 2"
1 9⁄ 16"
1 5⁄ 8"
1 11⁄ 16"
1 3⁄ 4"
1 13⁄ 16"
1 7⁄ 8"
1 15⁄ 16"
2"
2 1⁄ 16"
2 1⁄ 8"
2 3⁄ 16"
2 1⁄ 4"
2 5⁄ 16"
1.344"– 1.282"
1.406"– 1.344"
1.469"– 1.407"
1.531"– 1.469"
1.594"– 1.532"
1.656"– 1.594"
1.719"– 1.657"
1.781"– 1.719'
1.844"– 1.782"
1.906"– 1.844"
1.969"– 1.907"
2.031"– 1.969"
2.094"– 2.032"
2.156"– 2.094"
2.219"– 2.157"
2.281"– 2.219"
2.344"– 2.282"
14
5 16
SMOOTH
SERRATED
PART NUMBER PART NUMBER
44437
44439
44441
44443
44445
44447
44449
44451
44453
44455
44457
44459
44461
44463
44465
44467
44469
44537
44539
44541
44543
44545
44547
44549
44551
44553
44555
44557
44559
44561
44563
44565
44567
44569
GROUND
DIAMETER
RANGE
2 3⁄ 8"
2 7⁄ 16"
2 1⁄ 2"
2 9⁄ 16"
2 5⁄ 8"
2 11⁄ 16"
2 3⁄ 4"
2 13⁄ 16"
2 7⁄ 8"
2 15⁄ 16"
3"
3 1⁄ 16"
3 1⁄ 8"
3 3⁄ 16"
3 1⁄ 4"
2.406"– 2.344"
2.469"– 2.407"
2.531"– 2.469"
2.594"– 2.532"
2.656"– 2.594"
2.719"– 2.657"
2.781"– 2.719"
2.844"– 2.782"
2.906"– 2.844"
2.969"– 2.907"
3.031"– 2.969"
3.094"– 3.032"
3.156"– 3.094"
3.219"– 3.157"
3.281"– 3.219"
GROUND
DIAMETER
RANGE
2 15⁄ 16"
3"
3 1⁄ 16"
3 1⁄ 8"
3 3⁄ 16"
3 1⁄ 4"
3 5⁄ 16"
3 3⁄ 8"
3 7⁄ 16"
3 1⁄ 2"
3 9⁄ 16"
3 5⁄ 8"
3 11⁄ 16"
3 3⁄ 4"
3 13⁄ 16"
3 7⁄ 8"
3 15⁄ 16"
4"
2.969"– 2.907"
3.031"– 2.969"
3.094"– 3.032"
3.156"– 3.094"
3.219"– 3.157"
3.281"– 3.219"
3.344"– 3.282"
3.406"– 3.344"
3.469"– 3.407"
3.531"– 3.469"
3.594"– 3.532"
3.656"– 3.594"
3.719"– 3.657"
3.781"– 3.719"
3.844"– 3.782"
3.906"– 3.844"
3.969"– 3.907"
4.031"– 3.969"
SMOOTH
SERRATED
PART NUMBER PART NUMBER
44471
44473
44475
44477
44479
44481
44483
44485
44487
44489
44491
44493
44495
44497
44499
44571
44573
44575
44577
44579
44581
44583
44585
44587
44589
44591
N/A
N/A
N/A
N/A
*Royal QG-80 Collets have six segments instead of three for increased gripping torque.
Royal QG-100 Round Collets* – $675 Each
NEW
GROUND
DIAMETER
RANGE
SMOOTH
PART NUMBER
SERRATED
PART NUMBER
GROUND
DIAMETER
RANGE
⁄ "
⁄"
11 16
⁄ "
34
⁄"
13 16
⁄ "
78
⁄"
15 16
⁄ "
1"
1 1⁄ 16"
1 1⁄ 8"
1 3⁄ 16"
1 1⁄ 4"
1 5⁄ 16"
1 3⁄ 8"
1 7⁄ 16"
1 1⁄ 2"
1 9⁄ 16"
1 5⁄ 8"
1 11⁄ 16"
0.594"– 0.532"
0.656"– 0.594"
0.719"– 0.657"
0.781"– 0.719"
0.844"– 0.782"
0.906"– 0.844"
0.969"– 0.907"
1.031"– 0.969"
1.094"– 1.032"
1.156"– 1.094"
1.219"– 1.157"
1.281"– 1.219"
1.344"– 1.282"
1.406"– 1.344"
1.469"– 1.407"
1.531"– 1.469"
1.594"– 1.532"
1.656"– 1.594"
1.719"– 1.657"
45011
45012
45013
45014
45015
45016
45017
45018
45019
45020
45021
45022
45023
45024
45025
45026
45027
45028
45029
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
45201
45202
45203
45204
1 3⁄ 4"
1 13⁄ 16"
1 7⁄ 8"
1 15⁄ 16"
2"
2 1⁄ 16"
2 1⁄ 8"
2 3⁄ 16"
2 1⁄ 4"
2 5⁄ 16"
2 3⁄ 8"
2 7⁄ 16"
2 1⁄ 2"
2 9⁄ 16"
2 5⁄ 8"
2 11⁄ 16"
2 3⁄ 4"
2 13⁄ 16"
2 7⁄ 8"
1.781"– 1.719"
1.844"– 1.782"
1.906"– 1.844"
1.969"– 1.907"
2.031"– 1.969"
2.094"– 2.032"
2.156"– 2.094"
2.219"– 2.157"
2.281"– 2.219"
2.344"– 2.282"
2.406"– 2.344"
2.469"– 2.407"
2.531"– 2.469"
2.594"– 2.532"
2.656"– 2.594"
2.719"– 2.657"
2.781"– 2.719"
2.844"– 2.782"
2.906"– 2.844"
9 16
58
SMOOTH
SERRATED
PART NUMBER PART NUMBER
45030
45031
45032
45033
45034
45035
45036
45037
45038
45039
45040
45041
45042
45043
45044
45045
45046
45047
45048
45205
45206
45207
45208
45209
N/A
45211
N/A
45213
N/A
45215
N/A
45217
N/A
45219
N/A
45221
N/A
45223
SMOOTH
SERRATED
PART NUMBER PART NUMBER
45049
45050
45051
45052
45053
45054
45055
45056
45057
45058
45059
45060
45061
45062
45063
45064
45065
45066
*Royal QG-100 Collets have six segments instead of three for increased gripping torque.
Check out the Royal Quick-Grip™ CNC Collet
Chuck Video at www.colletchucks.com
18
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
N/A
45225
N/A
N/A
N/A
45229
N/A
N/A
N/A
45233
N/A
N/A
N/A
45237
N/A
N/A
N/A
N/A
QUICK-GRIP™ COLLETS
Quick-Grip™ Hex Collets
q In addition to our wide range of round-bore collets, Royal also stocks QG-65 and
QG-80 hex collets in many common sizes for immediate delivery.
q The hex collet gripping range is the same as that of our round-bore models (nominal
size +/– 0.032").
q During compression, the segments of Royal quick-Grip™ hex collets remain parallel
to the workpiece for maximum accuracy and gripping strength.
q All hex collets are smooth bore.
Royal QG-65 Hex Collets – $439 Each
RANGE
PART NUMBER
RANGE
PART NUMBER
RANGE
PART NUMBER
0.282" – 0.344"
0.344" – 0.406"
0.407" – 0.469"
0.469" – 0.531"
0.532" – 0.594"
0.594" – .0656"
0.657" – 0.719"
0.719" – 0.781"
0.782" – 0.844"
0.844" – 0.906"
0.907" – 0.969"
44700
44701
44702
44703
44704
44705
44706
44707
44708
44709
44710
0.969" – 1.031"
1.032" – 1.094"
1.094" – 1.156"
1.156" – 1.219"
1.219" – 1.281"
1.281" – 1.344"
1.344" – 1.406"
1.406" – 1.469"
1.469" – 1.531"
1.531" – 1.594"
1.594" – 1.656"
44711
44712
44713
44714
44715
44716
44717
44718
44719
44720
44721
1.656" – 1.719"
1.719" – 1.781"
1.781" – 1.844"
1.844" – 1.906"
1.906" – 1.969"
1.969" – 2.031"
2.031" – 2.094"
2.094" – 2.156"
2.156" – 2.219"
2.219" – 2.281"
44722
44723
44724
44725
44726
44727
44728
44729
44730
44731
Royal QG-80 Hex Collets* – $559 Each
RANGE
PART NUMBER
RANGE
PART NUMBER
RANGE
PART NUMBER
0.407" – 0.469"
0.469" – 0.531"
0.532" – 0.594"
0.594" – .0656"
0.657" – 0.719"
0.719" – 0.781"
0.782" – 0.844"
0.844" – 0.906"
0.907" – 0.969"
0.969" – 1.031"
1.032" – 1.094"
1.094" – 1.156"
1.156" – 1.219"
44740
44741
44742
44743
44744
44745
44746
44747
44748
44749
44750
44751
44752
1.219" – 1.281"
1.281" – 1.344"
1.344" – 1.406"
1.406" – 1.469"
1.469" – 1.531"
1.531" – 1.594"
1.594" – 1.656"
1.656" – 1.719"
1.719" – 1.781"
1.781" – 1.844"
1.844" – 1.906"
1.906" – 1.969"
1.969" – 2.031"
44753
44754
44755
44756
44757
44758
44759
44760
44761
44762
44763
44764
44765
2.031" – 2.094"
2.094" – 2.156"
2.156" – 2.219"
2.219" – 2.281"
2.281" – 2.344"
2.344" – 2.406"
2.406" – 2.469"
2.469" – 2.531"
2.531" – 2.594"
2.594" – 2.656"
2.656" – 2.719"
2.719" – 2.781"
44766
44767
44768
44769
44770
44771
44772
44773
44774
44775
44776
44777
*Royal QG-80 hex collets have six segments instead of three for increased gripping torque.
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
19
QUICK-GRIP™ COLLETS
Royal QG-100 Hex Collets* – $875 Each
RANGE
PART NUMBER
RANGE
PART NUMBER
RANGE
PART NUMBER
0.719" – 0.781"
0.969" – 1.031"
1.219" – 1.281"
1.469" – 1.531"
44904
44908
44912
44916
1.719" – 1.781"
1.969" – 2.031"
2.219" – 2.281"
2.469" – 2.531"
44920
44924
44928
44932
2.719" – 2.781"
2.969" – 3.031"
3.219" – 3.281"
44936
44940
44944
*Royal QG-100 hex collets have six segments instead of three for increased gripping torque.
Quick-Grip™ Square Collets
Royal QG-65 Square Collets – $439 Each
RANGE
PART NUMBER
RANGE
PART NUMBER
0.469" – 0.531"
0.719" – 0.781"
0.969" – 1.031"
44734
44735
44736
1.219" – 1.281"
1.469" – 1.531"
1.719" – 1.781"
44737
44738
44739
Royal QG-80 Square Collets* – $644 Each
NEW
RANGE
PART NUMBER
RANGE
PART NUMBER
0.469" – 0.531"
0.719" – 0.781"
0.969" – 1.031"
1.219" – 1.281"
44780
44781
44782
44783
1.469" – 1.531"
1.719" – 1.781"
1.969" – 2.031"
44784
44785
44786
*Royal QG-80 square collets have six segments instead of three for increased gripping torque.
Custom Quick-Grip™ Collets
q Custom Quick-Grip™ collets can be ordered for odd-shaped parts, off-center turning, etc.
q Dedicated regrinding equipment enables us to quickly deliver custom-sized collets.
q Master collets are also available for use with S-type collet pads.
For applications involving custom Quick-Grip™ collets, please contact a Royal Products
applications engineer at 1-800-645-4174.
20
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
QUICK-GRIP™ COLLETS
Quick-Grip™ Emergency Collets
q Semi-hard QG emergency collets are designed to be machined in place by the customer to
accommodate special sizes, shapes, steps, etc.
q Available in assorted pilot hole sizes to minimize machining time.
q Boring fixture holds collet segments firmly in place and puts collet under slight compression
to ensure accuracy and roundness during machining. Order fixture separately.
Royal Quick-Grip™ Emergency Collets
FITS CHUCK
MODEL
QG-42
QG-65
QG-80
QG-100
PILOT HOLE SIZE
PART NUMBER
5mm (0.20")
15mm (0.59")
30mm (1.18")
8mm (0.31")
20mm (0.79")
30mm (1.18")
40mm (1.57")
8mm (0.31")
20mm (0.79")
40mm (1.57")
60mm (2.36")
30mm (1.18")
45mm (1.77")
65mm (2.56")
90mm (3.54")
44187
44188
44189
44353
44354
44355
44356
44360
44361
44362
44363
44367
44368
44369
44370
PRICE
$337
337
337
438
438
438
438
663
663
663
663
805
805
805
805
NEW
Royal Boring Fixtures
COLLET MODEL
PART NUMBER
PRICE
QG-42
QG-65
QG-80
QG-100
44082
44083
44088
44089
$193
273
445
535
For your Royal Quick-Grip™
Collet storage needs, please
give our friends at Huot a call at
1-800-832-3838 or visit them at
www.huot.com
TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com
21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising