Overwhelming Performance Drill 6411/ 6412/ 6413

Overwhelming Performance Drill 6411/ 6412/ 6413
Satisfy Professional's Needs
Drill
6411/ 6412/ 6413 10mm (3/8")
Overwhelming
Performance
6412
:: Keyed chuck
:: Variable speed
:: Reversing
6413
:: Keyless chuck
:: Variable speed
:: Reversing
6411
:: Keyed chuck
:: Single speed
*Tool does not come with bit.
Compact and lightweight, yet with enough power
Drill
6411 / 6412 / 6413
10mm (3/8")
Powerful motor
Lightweight
450W
1.2kg(2.6lbs)
Compact: 228mm (9") (6411, 6412)
No load speed 3,000rpm
Optimum for light-duty jobs such
as small hole drilling in wood
Chuck capacity:
1.5-10mm (1/16"-3/8")
Ergonomically designed
rubberized grip
Keyed chuck: 6411, 6412
Keyless chuck: 6413
Reversing switch
Provides more comfort and control
while minimizing hand fatigue and pain.
Variable speed control
by trigger switch
In-line design
(6412, 6413)
(6412, 6413)
All ball bearing construction
Brings drilling pressure
in line with center of drill bit axis.
Lock-on button
for long continuous
operation
Comparison of Drilling Efficiency
Note: 1. It may differ under some conditions.
2. Numbers in the charts below are relative values when the
capacity of competitor B model is indexed at 100.
Test conditions: Drilled holes through 60mm thick lauan
plywood with 18mm diameter auger bit.
Makita
6413
120
Competitor
"H"
115
Competitor
"B"
slow 0
Drill
Double Insulation
Variable Speed
(6412, 6413 only)
Reversing
(6412, 6413 only)
Keyless Chuck
(6413 only)
6411 / 6412 / 6413
Continuous rating Input
Capacity
No load speed
Dimensions
(L x W x H)
Net weight
Power supply cord
100
90
100
110
120 fast
64
10mm (3/8")
6411
450W
Steel : 10mm (3/8")
Wood : 25mm (1")
3,000rpm
228 x 64 x 183mm
(9" x 2-1/2" x 7-1/4")
1.2kg (2.6lbs)
2.0m (6.6ft)
6412
450W
Steel : 10mm (3/8")
Wood : 25mm (1")
0-3,000rpm
228 x 64 x 183mm
(9" x 2-1/2" x 7-1/4")
1.2kg (2.6lbs)
2.0m (6.6ft)
6413
450W
Steel : 10mm (3/8")
Wood : 25mm (1")
0-3,000rpm
234 x 64 x 183mm
(9-1/4" x 2-1/2" x 7-1/4")
1.2kg (2.6lbs)
2.0m (6.6ft)
Standard Equipment
Chuck key (6411, 6412)
Items of standard equipment and specifications may differ by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN Z23318-2 2007-04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising