Инструкция к настенному кронштейну DA-WM1500 для корпусных IP-видеокамер серии DC-B и DC

Инструкция к настенному кронштейну DA-WM1500 для корпусных IP-видеокамер серии DC-B и DC
DA-WM1500 INSTALLATION MANUAL
This manual is intended for users of the DA-WM1500
wall mounting bracket. It includes instructions for
mounting the DA-WM1500 wall mounting bracket to
a wall.
•This bracket is intended to be used with
DC-B series model of camera. Do not use
it with other models of cameras.
•This installation should be performed
by a qualified service personnel in
conformance to all local codes.
•You may need to reinforce the wall. If the
wall is not strong enough to support the
camera, the camera may fall.
•Do not use this product for other
purposes.
Mounting
Mount the bracket to the wall as follows:
1
Insert cables from external devices, network and
power adapter through the hole in the rear of
bracket.
2
Mount bracket to the wall by using the screws (not
provided).
Bracket
Connect your camera to the bracket as follows:
3
Mount plate, which is enclosed with the camera, onto
the bottom or top of the camera by using the screws.
Plate
4
Mount the camera onto bracket by using the screw
(not provided).
5
Adjust the camera angle by loosening the tilt or pan
adjustment screws
6
Turn on power.
Tilt Adjustment
Screw
Pan Adjustment
Screw
Bracket
Dimensions
10
(0
.3
9)
Unit: mm (inch)
23 (
0.91
280 (11.02)
)
.31
)
100 (3.94)
7 (0.28)
38 (1.50)
133.2 (5.24)
)
.31
8 (0
0
8(
300 (11.81)
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Ver.1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising