datasheet for FMOC11 by Frequency Management International

datasheet for FMOC11 by Frequency Management International
5.0 Vdc Supply Voltage
FMOC11 SERIES
HCMOS/TTL Compatible
5.0 Vdc Clock Oscillators
Wide Frequency Range
14 PIN DIP
Hermetically Sealed
SPECIFICATIONS
08 - Issue 2 - 041508
Parameter
Frequency Range
Overall Frequency Tolerance
Operating Temperature Range
Storage Temperature
Supply Voltage (Vdd)
Supply Current (Icc)
Symmetry (Duty Cycle)
Output “0” Level (VOL)
Output “1” Level (VOH)
Rise and Fall Time
Jitter
Start Time
Output Load
Pin 1 Options
(See Spec. Option T below)
Output Disable/Enable Time:
Aging @ 25°C
Specification
500 kHz - 160 MHz
±20 ppm to ±100 ppm
(Inclusive of Operating Temp., Supply Voltage, & Load)
0 to +70°C Std. (See Temp. Range Options)
-55 to +125°C
+5.0 Vdc (±0.5 Vdc)
20 mA max. @ 500.0 kHz to 23.9 MHz
40 mA max. @ 24.0 to 49.9 MHz
50 mA max. @ 50.0 to 85.0 MHz
90 mA max. @ 86.0 to 160.0 MHz
40/60% Std., 45/55% Avail. (See Spec. Option S)
0.4 Vdc max. (TTL)
0.5 Vdc max. (HCMOS)
2.4 Vdc min. (TTL)
4.5 Vdc min. (HCMOS)
10 ns max. < 5 ns typical
Absolute: ±100 pSec Max
One Sigma: ±25 pSec Max
0 ms max. < 5 ms typical
10 TTL / 50 pF HCMOS (up to 24.0 MHz)
10 TTL / 15 pF HCMOS
No Connect (Std.)
Tri-State (option T)
VIH: 2.2 V or Open Enables Output
VIL: 0.8 V Disables Output
100 nS max.
±5ppm max first year
All specifications subject to change without notice.
STANDARD MARKING
XXX.XXXM
XXXXXXX
• FMI YYWW
FULL SIZE 14 PIN DIP
0.031
(0.76)
MAX
0.240
(6.1)
MAX.
0.250
(6.35)
MAX.
0.018
(0.46)
0.800
(20.3)
MAX.
1
7
Insulated
Stand-Offs
0.510
(12.95)
MAX.
0.300
(7.62)
14
8
0.600
(15.24)
PIN FUNCTION TABLE
Pin
1
7
8
14
Function
NC or Tri-State
Case Ground
Output
Supply Voltage (Vdd)
XXX.XXXM FREQUENCY in MHz
XXXXXXX Part Number
Pin 1 Symbol, FMI, Date Code
Dimensions: Inches
(mm)
Standard Specifications for product indicated in color
PART DESCRIPTION SYSTEM
MARKING: See Page 52, Format A
A
Product Family
HCMOS/TTL Compatible
5.0 Vdc Clock Osc.
Full-Size 14 Pin DIP
Overall Frequency Tol.
20 ±20 ppm
25 ±25 ppm
50 ±50 ppm
00 ±100 ppm
nn ±Custom Value
Temp. Range
A 0 to 70 °C
B -20 to 70 °C
C -40 to 85 °C
D -10 to 50 °C
E -10 to 60 °C
F -30 to 60 °C
J 0 to 50 °C
X Custom
Frequency (MHz)
Specification Options
S - Tight Symmetry
(45/55%) Duty Cycle
T - Tri-State
BLANK - None Required (Std.)
Options
GW - Gull Wing
PD - Parameter Data
CM - Custom Mark
BLANK - None Req’d.
1-800-800-XTAL
[9825]
www.fmi-inc.com
28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising