BB96XX, BB120XX & BB150XX BB150XX Top View Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’ BB96XX Number Clearance Shelf with “P” Plate Capacity* with “C” without of Between Shelves Size carriers carriers carriers Shelves in mm BB96XX 96 120 120 3 13 330 51x261/2 1295x673 BB120XX 120 144 144 3 16 BB150XX 150 180 180 3 16 in Overall Dimensions Height mm Depth Caster Width in mm in mm 54 1346 35 406 51x261/2 1295x673 643/4 1645 406 633/8x261/21610x673 643/4 1645 in Shipping Diameter Weight mm in mm lbs kgs 889 591/2 1511 6 152 545 247 35 889 591/2 1511 6 152 575 261 35 889 721/4 1835 6 152 615 279 *Capacity based on common plate depth and combined plate/cover height of 2.5”. Due to the variety of plate thicknesses and depths, as well as plate cover heights, actual capacity may vary. CONSTRUCTION...Completely welded double wall cabinet construction with outer cabinet formed and welded to base. All seams turned in to eliminate raw edges. CABINET MATERIAL...All stainless steel construction; 20 gauge polished exterior and 24 gauge interior. BASE FRAME...12 gauge stainless steel full depth bolsters with 1”x1” stainless steel perimeter channel supports. CASTERS...6” diameter, industrial grade polyurethane casters. Two swivel and two rigid. Sealed roller axle bearing and double ball bearing swivel. Zerk grease fittings. Plate mounted and bolted to base in offset “wheel ahead” pattern. Two casters fitted with brakes. BUMPER...Non-marking gray vinyl bumper set in heavy duty 3/16” extruded aluminum frame with reinforced corner “cut-outs.” DOOR...Welded double stainless steel door. Filled with 1” thick fiberglass insulation. HINGES...Concealed, stainless steel hinge with 5/16” pin. PUSH HANDLES... Two horizontal full width stainless steel tubular push handles with back-up plates. Mounted to each end of the cabinet. LATCH...Flush mounted, hevy-duty sliding latch with exclusive grip handle. SHELVES...Welded, duplex nickel-plated removable wire shelves. THERMOMETER...Dial type with remote sensing bulb and sensing bulb protector. Mounted to door. HEATING SYSTEM...Bottom mounted heater. Stainless steel construction. Removable without tools. 1600 watt inconel-sheathed heating element. High impedance protected, internally cooled fan motor. Full range thermostat and power indicating light. ELECTRICAL CHARACTERISTICS... Operates on 120 volts, 60 cycle, single phase, 1650 watts, 13.7 amps. Ten foot rubber cord with 3 pring grounding plug. NEMA 5-15P plug. PERFORMANCE...Capable of heating to 200 F (94 C). Preheat to 160 F (71 C) in approximately 20 minutes. O O O B56 0412 CARTER-HOFFMANN 1551 McCormick Ave., Mundelein, IL 60060 (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981 www.carter-hoffmann.com Printed in U.S.A. ACCESSORIES/OPTIONS... 4 wheel brakes Alternate electrical configurations On/Off heater toggle switch Top mounted transport latch Locking paddle latch Lexan thermometer cover Cold plate Alternate caster sizes & types Menu card holder Plate carriers - specify open “P” type or covered plate “C” type Specifications subject to change through product improvement & innovation. NSF/ANSI 4 O Carter-Hoffmann is a trademark of Carter-Hoffmann LLC. INSULATION...1” thick high density continuous wrap-around type fiberglass insulation with 1 1/2” thickness on top. GASKET...High temperature silicone gasket mounted to cabinet. SPECIFICATIONS Model FOOD SERVICE EQUIPMENT BB96XX & BB120XX Top View BANQUET CARTS BB150XX Front View BB120XX Front View BB96XX Front View Number CARTER-HOFFMANN BANQUET CARTERS for plates up 12-3/4” FEATURES & BENEFITS . (800)323-9793 . Fax (847)367-8981 Since 1947, Foodservice Equipment That Delivers! COMPLETELY WELDED TURNED-IN SEAM CONSTRUCTION... Adds rigidity to entire cabinet and eliminates raw edges for ease of cleaning and safety. DOUBLE WALL STAINLESS STEEL CABINET... Strongest, most durable materials for long life. High density 1” thick fiberglass in walls and door, 1 1/2” thick on top for maximum heat retention. WRAP-AROUND BUMPER...Full perimeter aluminum bumper with nonmarking gray vinyl insert. Protects cart and facility walls from damage. HEAVY-DUTY STAINLESS STEEL BASE FRAME... 12 gauge caster bolsters with perimeter frame for rugged use and added durability. BB96XX 6” DIAMETER INDUSTRIAL GRADE CASTERS WITH POLYURETHANE TREAD... Long lasting and easy rolling for maximum load and minimum maintenance. Two swivel and two rigid. Swivel casters fitted with brakes. Mounted to base in offset wheel-ahead pattern for easy rolling over uneven surfaces. www.carter-hoffmann.com Tel. (847)362-5500 1551 McCormick Avenue, Mundelein, Illinois 60060 BB96XX, BB120XX & BB150XX BANQUET CARTERS NSF/ANSI 4 HIGH PERFORMANCE REMOVABLE HEATER... Blower system for fast heat up, recovery and even heat distribution throughout cabinet. Removable without tools for easy service and cabinet cleaning. REMOVABLE WIRE SHELVES...Welded, duplex nickel-plated with reinforced shelf clips. Sturdy for heavy plate loads and removable for cleaning.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project