ITP-802GSM-8PH24, ITP-802GTM-8PH24, ITP-800M-8PH24 - Управляемые EN50155 Fast Ethernet коммутаторы с PoE

ITP-802GSM-8PH24, ITP-802GTM-8PH24, ITP-800M-8PH24 - Управляемые EN50155 Fast Ethernet коммутаторы с PoE
EN50155 Managed PoE Switch
SmartView
EN50121-4
EN61000-6-2
EN61000-6-4
EN50155
u-Ring
IP67
WaterProof
IEEE 1588 V2
180 Watts,
24V Booster
ITP-802GSM-8PH24
8x 10/100Base–T + 2x 100/1000Base–X SFP with 8x PoE+
Managed Ethernet Switch
ITP-802GTM-8PH24
8x 10/100Base–T + 2x 100/1000Base–X with 8x PoE+
Managed Ethernet Switch
7
ITP-800M-8PH24
8x 10/100Base–T with 8x PoE+ Managed Ethernet Switch
EN50155 Managed PoE Switch
ITP-802GSM-8PH24 series are managed industrial grade gigabit PoE (Power over Ethernet) switches with 8 10/100Base-TX PoE ports and/or 2
Gigabit/Fast Ethernet SFP ports that provide stable and reliable Ethernet transmissions. ITP-802GSM-8PH24 series equipped with PoE feature
enable power and data to be transferred via a single cable, hereby considerably reducing cabling expenses. ITP-802GSM-8PH24 series also
provides a variety of functions to manage PoE operation including PoE device auto-checking, auto reset, and PoE power weekly scheduling.
Other advanced Ethernet functions are supported and include STP/RSTP/MSTP/ ITU-T G.8032 ERPS and multiple µ-Ring for redundant cabling,
layer 2 Ethernet IGMP, VLAN, QoS ,Security, IPv6, bandwidth control, port mirroring, cable diagnostic and Green Ethernet.
Housed in rugged DIN rail or wall mountable enclosures, these switches are designed for the harshest environments. Specifically, ITP-802GSM8PH24 series switches use M12 connectors to ensure water tight, robust connections and to guarantee reliable connections against environmental
disturbances, such as vibration and shock. ITP-802GSM-8PH24 series are compliant with EN 50155, covering power input voltage, surge, EFT, ESD,
vibration, shock, thus making the switches suitable for industrial applications, such as vehicle, rolling stock, ship, vessel.
ITP-802GSM-8PH24 series are IP67 rated to protect against dust and water submersion. They are particularly used in environments with extreme
temperature, high humidity, oil, dust and in outdoor environments requiring water-proof applications such as IP surveillance, city security. ITP-802GSM8PH24 series can also work with CTC Management platform SmartView™ to provide convenient, real-time and centralized device management.
Feature
▪▪8x 10/100Base-TX M12 and 2x 100/1000Base-X SFP Fiber (Total 10
Port) (ITP-802GSM-8PH24)
▪▪8x 10/100Base-TX M12 and 2x 10/100/1000Base-T (Total 10 Port)
(ITP-802GTM-8PH24)
▪▪8x 10/100Base-TX M12(Total 8 Port) (ITP-800M-8PH24)
▪▪M12 and M23 connector against vibration and shock
▪▪IP67 grade housing for against water, dust, and oil (Figure 4)
▪▪24/48VDC redundant dual input power, and built-in power
booster design upto 55 VDC for PoE output (Figure 2)
▪▪Regulated PoE output voltage (55VDC) to stabilize PoE device,
and guarantee delivery PoE power distance to 100meter (Figure 2)
▪▪Provides 8-port IEEE802.3af / 802.3at PoE output (30W per Port)
▪▪Maximum PoE output power budget 180W
▪▪Advanced PoE Management, PoE PD Failure Auto Checking and auto
reset, PoE configuration for power planning, weekly scheduling
▪▪UL60950-1, CE, FCC, Rail Traffic EN50155,EN50121-4 certified
▪▪Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
▪▪Cable diagnostic, Measuring cable OK or broken point distance
▪▪Supports Green Ethernet IEEE802.3az EEE (Energy Efficient
Ethernet) management to optimize the power consumption
▪▪STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring (EPR)
for redundant cabling
▪▪Provide up to 5 instances that each supports µ-Ring, u-Chain
or Sub-Ring type for flexible uses (Figure 6)
▪▪µ-Ring for Redundant Cabling, recovery time<10ms in 250
maximum devices
▪▪ DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
▪▪QoS, Traffic classification QoS, CoS, bandwidth control for Ingress
and Egress, Storm Control, DiffServ
▪▪IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN,
Protocol based VLAN, VLAN translation, GVRP, MVR
▪▪Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
▪▪IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query,
IGMP proxy reporting, MLD snooping V1/V2
▪▪Security : Port based and MAC based IEEE802.1X, RADIUS, ACL,
TACACS+, HTTP/HTTPS, SSL/SSH v2
▪▪Software upgrade via TFTP and HTTP, redundant firmware to
avoid in case of upgrade failure
▪▪Support IEEE1588 PTP V2 for precise time synchronization to
operate in Ordinary-Boundary, Peer to Peer Transparent Clock,
End to End Transparent Clock, Master, Slave mode by each port
▪▪RMON, MIB II, Port mirroring, Event syslog, DNS, NTP IEEE802.1ab LLDP
▪▪Support 5 operating mode in each port: Ordinary-Boundary,
Peer to Peer Transparent Clock, End to End Transparent Clock,
Master, Slave
▪▪Supports IPv6 Telnet server /ICMP v6
▪▪CLI, Web based management, SNMP v1/v2c/v3, Telnet
server for management
▪▪Provides SmartConfig for quick and easy mass configuration
tool (Figure 8)
▪▪Supports SmartView for centralized management (Figure 9)
▪▪Supporting Central EMS for management of up to 50 SmartView
Server, and maximum up to 25,000 device (Figure 10)
Specifications
Standard
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
10Base-T 10Mbit/s Ethernet
100Base-TX, 100Base-FX, Fast Ethernet
1000Base-T Gbit/s Ethernet over twisted pair
1000Base-X Gbit/s Ethernet over
IEEE 802.3z
Fiber-Optic
IEEE 802.1d
STP (Spanning Tree Protocol)
IEEE 802.1w
RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s
MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 / ERPS (Ethernet Ring Protection
Y.1344
Switching)
IEEE 802.1Q
Virtual LANs (VLAN)
Port based and MAC based Network
IEEE 802.1X
Access Control, Authentication
aggregation for parallel links with
IEEE 802.3ad Link
LACP(Link Aggregation Control Protocol)
IEEE 802.3x
Flow control for Full Duplex
IEEE 802.3af
PoE (Power over Ethernet)
IEEE 802.3at PoE+ (Power over Ethernet ehancements)
Standard
IEEE 802.1ad
Stacked VLANs, Q-in-Q
LAN Layer 2 QoS/CoS Protocol for
Traffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)
4094 IEEE802.1Q VLAN VID
Back-plane (Switching Fabric):
5.6Gbps(ITP-802GSM-8PH24)
5.6Gbps (ITP-802GTM-8PH24)
1.6Gbps (ITP-800M-8PH24)
(Full wire-speed)
Store and Forward
IEEE 802.3x for full duplex mode Back pressure for
half duplex mode
8x M12 (4-Pin D-code Female) ports support IEEE
802.3af / IEEE 802.3at End-Span, Alternative A mode.
Positive (V+) : M12 pin 2,4
Negative (V-) : M12 pin 1,3. Data (1,2,3,4)
IEEE 802.1p
VLAN ID
Switch
Architecture
Data Processing
Flow Control
PoE RJ-45 Pin
Assignment
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
www.ctcu.com
sales@ctcu.com
7-8
EN50155 Managed PoE Switch
Network
Connector
Network
Connector
Console
Network Cable
Protocols
Reverse Polarity
Protection
Overload Current
Protection
CPU Watch Dog
LED
8x M12 (4-Pin, Female,D-Code) 10/100Base-TX UTP ,
Auto negotiation speed, Auto MDI/MDI-X function,
Full/Half duplex
2x M12 (8-Pin, female,A-Code) 10/100/1000Base-T UTP
(For ITP-802GTM-8PH24)
Water proof Fiber Cable Gland support for 2 X
100/1000 Base-X SFP slot, with DDMI
(For ITP-802GSM-8PH24)
Build-in 2 bypass port (For ITP-802GTM-8PH24)
RS-232 (5-pin A-Code M12 male )
UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)
CSMA/CD
Present
Present
Present
Per unit: Power 1 (Green), Power 2 (Green), Fault
(Amber), CPU Act (Green), Ring Master (Yellow)
Per UTP port: 10/100 Link/Active (Green)
1000 Link/Active (Amber) (For ITP-802GTM-8PH24)
SFP Fiber Per port: Link/Active (Green)
(For ITP-802GSM-8PH24)
PoE Port LED 1 LED /per Port :
• PoE Output Power On : ON (Green)
• PoE Fault (Over Load, Short Circuit, Port failed at
Startup) : Flash 1times /sec (Green)
• PoE Output Power Off : Off (Green)
Jumbo Frame
9.6KB
MAC Address Table 8K
Memory Buffer
256K Bytes for packet buffer
PoE Standard
IEEE802.3af, IEEE802.3at
PoE Power Output Maximum PoE output power budget 180W (30W/per
port) Regulated PoE output voltage at 55VDC (Figure 2)
Power Supply
Provides 1x M23 (5-Pin, male) for redundant dual DC
24/48V (20~57VDC) input power
Built-in power booster design up to 55 VDC for PoE output
Built-in very high efficiency booster(94~97%) to rise up 55
VDC for PoE output
Regulated PoE output voltage (55VDC) to stabilize
PoE device, and guarantee delivery PoE power
distance to 100meter (Figure 2)
Power
ITP-802GSM-8PH24
Consumption
Input
Total Power Device Power
PoE
Boost
Voltage
24 VDC
48 VDC
Consumption Consumption
196.4W
197.8W
8.1W
9.6W
Budget
Efficiency
180W
180W
95.50%
95.60%
PoE
Budget
Boost
Efficiency
180W
180W
95.00%
95.30%
ITP-802GTM-8PH24
Input
Voltage
24 VDC
48 VDC
Total Power Device Power
Consumption Consumption
198.3W
198.8W
8.9W
10.1W
Power
Consumption
ITP-800M-8PH24
Input
Voltage
24 VDC
48 VDC
Warning Message
Alarm
Relay Contact
Operating
Temperature
Total Power Device Power
Consumption Consumption
195.6W
196.8W
7.2W
8.7W
PoE
Budget
Boost
Efficiency
180W
180W
95.50%
95.60%
System Syslog, SMTP/ e-mail event message, alarm relay
5-pin A-code M12 male
Relay outputs with current carrying capacity of 1 A @24VDC
-10 ~ 60°C
(ITP-802GSM-8PH24, ITP-802GTM-8PH24, ITP-800M-8PH24)
-40 ~ 75°C
(ITP-802GSM-8PHE24, ITP-802GTM-8PHE24, ITP-800M8PHE24)
Operating
5% to 95% (Non-condensing)
Humidity
Storage Temperature -40 ~ 85°C
Housing
Rugged Metal, Fanless , IP67 grade housing for
against water, dust, and oil (Figure 4)
Dimensions
70x240x168mm (D x W x H)
Weight
2.17kg (ITP-802GSM-8PH24)
2.15kg (ITP-802GTM-8PH24)
2.055kg (ITP-800M-8PH24)
Installation
Wall mounting, or DIN Rail mounting (Optional)
Mounting
MTBF
184,605Hours (ITP-802GSM-8PH24)
131,930 Hours (ITP-802GTM-8PH24)
218,010 Hours (ITP-800M-8PH24)
Warranty
5 years
Certification
EMC
CE
EMI
(Electromagnetic FCC Part 15 Subpart B Class A,CE EN55022 Class A
Interference)
Railway Traffic
EN50155, EN50121-4
Immunity for
Heavy Industrial
EN61000-6-2
Environment
Emission for Heavy
Industrial
EN61000-6-4
Environment
EMS
EN61000-4-2 (ESD) Level 3, Criteria B
(Electromagnetic
EN61000-4-3 (RS) Level 3, Criteria A
Susceptibility)
Protection Level
EN61000-4-4 (Burst) Level 3, Criteria A
EN61000-4-5 (Surge) Level 3, Criteria B
EN61000-4-6 (CS) Level 3, Criteria A
EN61000-4-8 (PFMF, Magnetic Field) Field Strength:
300A/m, Criteria A
Safety
UL60950-1
Shock
IEC-61373
Freefall
IEC 60068-2-32
Vibration
IEC-61373
Software Specifications
Topology
VLAN
IEEE 802.1q VLAN,up to 4094 802.1Q VLAN VID
IEEE 802.1q VLAN,up to 4094 Groups
IEEE 802.1ad Q-in-Q
MAC-based VLAN,up to 256 entries
IP Subnet-based VLAN, up to 128 entries
Protocol-based VLAN(Ethernt, SNAP, LLC), up to 128 entries
VLAN Translation, up to 256 entries
GVRP (GARP VLAN Registration Protocol)
MVR ( Multicast VLAN Registration )
Link Aggregation Static (Hash with SA, DA, IP, TCP/UDP port), up to 5 trunk group
(Port Trunk)
Dynamic (IEEE 802.3ad LACP), up to 5 trunk group
Spanning Tree
IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP
Multiple µ-Ring
up to 5 instances that each supports µ-Ring, u-Chain or
Sub-Ring type for flexible uses, and maximum up to 5 Rings.
Recovery time <10ms
The maximum number of devices allowed in a Ring
supported ring is 250.
Loop Protection Present
ITU-T G.8032 /
Recovery time <50ms
Y.1344 ERPS
(Ethernet Ring
Single Ring, Sub-Ring, Multiple ring topology
Protection )
network
QoS Feature
Class of Service
IEEE802.1p 8 active priorities queues for per port
7-9
www.ctcu.com
sales@ctcu.com
Traffic
IEEE802.1p based CoS
Classification QoS IP Precedence based CoS
IP DSCP based CoS
Traffic
QCL(QoS Control List): Frame Type, Source/
Classification QoS Destination MAC, VLAN ID, PCP, DEI
QCE(QoS Control Entry): Protocol, Source IP, IP
Fragment, DSCP, TCP/UDP port number
Bandwidth
Rate in steps :1 kbps / Mbps / fps / kfps
Control for
Range : 100 kbps to 1Gbps / 1fps to 3300kfps
Ingress
Rate Unit : bit or frame
Bandwidth
Rate in steps : 1 kbps / Mbps
Control for Egress Range : 100 kbps to 1Gbps
Rate Unit : bit
Per queue / Per port shaper
DiffServ (RF 2474) Remarking
Storm Control
for Unicast, Broadcast, Multicast
IP Multicasting Feature
IGMP / MLD
IGMP Snooping v1, v2, v3 / MLD Snooping v1, v2
Snooping
Port Filtering Profile, Throttling
IGMP / MLD
Fast Leave
Snooping
Maximum Multicast Group : up to 1022 entries
Query / Static Router Port
Security Features
IEEE 802.1X
Port-Based, MAC-Based
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
EN50155 Managed PoE Switch
NTP
LLDP (IEEE
802.1ab)
ACL
Link Layer Discovery Protocol
LLDP-MED
IPv6 Features
IPv6 Management Telnet Server/ICMP v6
SNMP over IPv6
HTTP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 NTP Support
IPv6 TFTP Support
IPv6 QoS
IPv6 ACL
Number of rules: up to 256 entries
L2 / L3 / L4
Others Features
Green Ethernet
Supports IEEE802.3az EEE (Energy Efficient Ethernet)
Management to optimize the power consumption
Determine the cable length and lowering the power
for ports with short cables
Green Ethernet
Lower the power for a port when there is no link
LED Power Management :Adjustment LEDs intensity
Cable Diagnostic Measuring cable OK or broken point distance
Advanced PoE
PoE PD Failure Auto Checking, and Auto reset when PD fail
Management
PoE Scheduling ( On/Off schedule weekly)
PoE Configuration
PoE Enable/Disable
Power limit by classification
Power limit by management
Total PoE Power budge (maximum 180W) limitation
Power feeding priority
Application
Figure 1 : ITP Series in Onboard Application
Passenger Information System
IP Surveillance
Camera
NVR
IP Camera
Camera
LED
Display
Signage
Passenger
System
Wireless AP
Emergency System
Alarm
Passenger
LCD Display
Door
Sensor
Smoking
Sensor
u-Ring
ITP-800M-8PH24
ITP-802GTM-8PH24
ITP-802GSM-8PH24
Figure 2 : High efficiency boost technology for PoE
Stable Voltage
55V
57V
IP Camera
Regulated PoE Output
20V
Wide Power Input Range
(24/48VDC)
DC Boost & Regulate
CTC Union
VS
Other Vendors
Wireless AP
Unstable Voltage
57V
44V
Narrow
Power Input Range
(48VDC)
▪▪ Regulated PoE output voltage (55VDC ) to stabilize PoE device
▪▪ Guarantee delivery PoE power distance to 100 meter
▪▪ Wide range input power 24/48VDC (20~57VDC)
▪▪ Built-in very high efficiency (94~97%) to boost PoE output voltage
IP Camera
Non-DC Boost & Regulate
Wireless AP
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
www.ctcu.com
sales@ctcu.com
7-10
7
EN50155 Managed PoE Switch
Number of rules : up to 256 entries
for L2 / L3 / L4
RADIUS authentication & accounting
TACACS+ authentication & accounting, TACACS+ 3.0
HTTPS, HTTP
SSL / SSH v2
User Name
Local Authentication
Password
Remote Authentication (via RADIUS / TACACS+)
Authentication
Management
Interface Access Web, Telnet / SSH , CLI RS-232 console
Filtering
Management Features
CLI
Cisco® like CLI
Web Based Management
Telnet
Server
SNMP
V1, V2c, V3
SW &
TFTP, HTTP
Configuration
Redundant firmware in case of upgrade failure
Upgrade
RMON
RMON I (1, 2, 3, 9 group), RMON II
MIB II
RFC 1213
UPnP
DHCP
Server, Client, Relay, Snooping
Snooping option 82, Relay option 82
IP Source Guard
Port Mirroring
Event Syslog
Syslog server (RFC3164) (Support 1 server )
Warning Message System syslog, e-mail, alarm relay
DNS
Client, Proxy
IEEE1588 PTP V2 Support 5 operating mode in each port :
Ordinary-Boundary, Peer to Peer Transparent Clock,
End to End Transparent Clock, Master, Slave
EN50155 Managed PoE Switch
Figure 3 : ITP Series for Industrial Automation
Figure 4 : IP67 Waterproof
Figure 5 : An illustration of µ-Ring instances configured in Web interface
Figure 6 : µ-Ring Typ
Master
Port 3
Port 5
Backup Path
Ring
Slave
Slave
Slave
µ-Ring Type
Third Party
Network
Slave
Edge
Backup Path
Backup Path
Master
Edge
Master
Master
Backup Path
Ring
Chain
Sub-Ring
Slave
Slave
Slave
Determining the backup path (u-Chain type)
7-11
www.ctcu.com
sales@ctcu.com
A major ring and a Sub-Ring topology
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
EN50155 Managed PoE Switch
Figure 7 : Ring Configuration Example
Ring Configuration Type
u-Ring
Sub-Ring
7
Sub-Ring
EN50155 Managed PoE Switch
Ring
Sub-Ring
Ring
Sub-Ring
Sub-Ring
Sub-Ring
Sub-Ring
Combination of a ring and four Sub-Ring
Ring
Sub-Ring
Combination of a ring and two Sub-Ring
Sub-Ring
Cable Redundancy
Ring Configuration Type
Figure 8 : SmartConfig
TM
is a convenient configuration tool for mass deployment of switch products
▪▪ Quick & Easy for mass configuration tool
▪▪ Multiple device auto discovery
▪▪ Group configuration, access
▪▪ Group firmware upgrade
▪▪ Export/Import Configuration
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
www.ctcu.com
sales@ctcu.com
7-12
EN50155 Managed PoE Switch
Figure 9 : SmartView
TM
NMS
NMS
NORTH BOUND
SmartView
Server
Client
▪▪ Centralized Network Management Platform
▪▪ Long term events storage (up to 1 year)
▪▪ Alarm trap and event log management
▪▪ Real-time visual representations
▪▪ Remote access control
▪▪ Traffic/performance monitoring
DB
SNMP
SNMP
Ethernet Managed Switch /
IEC 61850-3 Switch
EN 50155 Managed Switch
Core Switch
SmartView
TM
Ethernet Managed
Converter
and management
management architecture
Figure 10 : Central EMS allows central management of up to 50 SmartViewTM servers
Central EMS
SmartView
Server
Area 48
SmartView
Server
DB
Area 49
SNMP
SmartView
Server
DB
DB
Area 2
Area 1
SNMP
▪▪ Allow central management of up to 50 SmartView servers
▪▪ Allow up to 25,000 devices management
▪▪ Hierarchical Network Management Architecture
▪▪ Easy and rapid expansion of SmartView EMS
TM
Area 50
TM
Dimensions
ITP-802GSM-8PH24
NMS
NMS
NORTH BOUND
SmartView
Server
Fiber Cable Gland
Client
DB
SNMP
SNMP
Industrial Ethernet Managed
Switch
FRM220/FRM220A
Fiber Optical Multiplexer
Industrial Ethernet Managed
Converter
SmartView management architecture
TM
Fiber Cable Gland
7-13
www.ctcu.com
sales@ctcu.com
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
EN50155 Managed PoE Switch
ITP-802GTM-8PH24
7
EN50155 Managed PoE Switch
ITP-800M-8PH24
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
www.ctcu.com
sales@ctcu.com
7-14
EN50155 Managed PoE Switch
Ordering Information
Model Name
Managed IP67
ITP-802GSM-8PH24
V
V
ITP-802GSM-8PHE24
ITP-802GTM-8PH24
ITP-802GTM-8PHE24
ITP-800M-8PH24
ITP-800M-8PHE24
V
V
V
V
V
V
V
V
V
V
Shock
UTP Port
Input
PoE Port
Certification
Vibration Operating
Voltage
Total M12 Gigabit
PoE Total
Port 10/100
Port
Temperture
IEEEE Power Budge 24/48 VDC EN50155
EN61000-6-2 CE
UL60950-1
IEC61373
EN61000-6-4 FCC
Base-TX
(20~57 VDC) EN50121-4
802.3at
10
8
2 SFP
8
180W
V
V
Plan
V
V
V
-10~60℃
10
10
10
8
8
8
8
8
8
8
2 SFP
2 UTP
2 UTP
8
8
8
8
8
180W
180W
180W
180W
180W
V
V
V
V
V
V
V
V
V
V
Plan
Plan
Plan
Plan
Plan
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
-40~75℃
-10~60℃
-40~75℃
-10~60℃
-40~75℃
Model Naming Rule
Optional Accessories
Package List
Industrial Power Supply
DRP-240-48
Industrial Power, Input 85 ~ 264VAC, Output 48VDC, 240W, -10 ~ +70°C
Industrial SFP Transceiver
(The ISFP series of industrial grade SFP modules have been fully tested with the ITP-G802SM-8PH24 for guaranteed compatibility and
performance. The best performance can be guaranteed even in mission-critical applications.)
(Please see CTC Union’s Industrial SFP datasheet for more details and more items.)
ISFP-M7000-85-D(E)
Industrial SFP GbE 1000Base-SX, M/M, 500 meter,wave length 850nm, 7.5dB, LC, DDMI, -10~70°C (-40~85°C)
ISFP-S7020-31-D(E)
Industrial SFP 1000Base-LX, S/M, 20km, wave length 1310nm, 15dB, LC, DDMI, -10~70°C (-40~85°C)
ISFP-T7T00-00- (E)
Industrial SFP 1000Base-T UTP 100meter, -10~70°C (-40~85°C)
ISFP-M5002-31-D(E)
Industrial SFP 155M 100Base-FX, MM, 2km, wave length 1310nm, 12dB, LC, DDMI, -10~70°C (-40~85°C)
ISFP-S5030-31-D(E)
Industrial SFP 155M 100Base-FX, SM, 30km, 1310nm, 19dB, LC, DDMI, -10~70°C (-40~85°C)
• ITP-802GSM-8PH24, ITP-802GTM8PH24 or ITP-800M-8PH24 device
• Protective caps for UTP port and
Console, Alarm port
• Fiber Cable Gland for SFP port x2 set
(For ITP-802GSM-8PH24)
• Console cable (M12 to DB9)
• CD (SmartConfig, Manual )
• Quickly installation guide
SFP Naming Rule
ISFP
Industrial
SFP
Transceiver
M
7
040
M: Multi Mode
S: Single Mode
T: UTP
9: 10G
7: GbE
5: FE
3: Long
Reach
UTP
31
Distance
T00: (UTP)
000: (500m)
002: (2km)
020: (20km)
040: (40km)
D
E
E:-40~85 C
Blank:0~70 C
Wavelength
D: DDMI
00: UTP
Blank: Non DDMI
85: 850nm
31:1310nm
55:1550nm
WA: TX/1310nm (Bidi mode A)
WB: TX/1550nm (Bidi Mode B)
MA: Master (for Long Reach UTP)
SL: Slave (for Long Reach UTP)
Optional Cable/Connector & Din-Rail Kit
P/N: CAB-M12AM8-RJ45
P/N: CAB-M12DM4-RJ45
P/N: CAB-M12AF5-OPEN
P/N: CAB-M23F5-OPEN
M12 A-code Male (8-Pin) to RJ-45,
AWG 24 ,IP67, 1 meter
M12 D-code Male (4-Pin) to RJ-45,
AWG 24 ,IP67, 1 meter
M12 A-code Female (5-Pin) to open
wire , AWG 22 , IP67, 1 meter
M23 Female (5-Pin) to open wire,
(AWG 16) , IP67, 1 meter
GbE port
(For ITP-802GTM-8PH24)
For FE UTP
For Alarm
For Power
P/N: M12A-M8
P/N: M12D-M4
P/N: M12A-F5
P/N: IND-DNK04
M12 A-code Male (8-Pin)
connector, IP67
M12 D-code Male (4-Pin)
connector, IP67
GbE port
(For ITP-802GTM-8PH24)
7-15
For FE UTP
www.ctcu.com
sales@ctcu.com
M12 A-code Female (5-Pin)
connector, IP67
For Alarm
Din Rail Kit for Industrial,
Wide: 52mm
(130 X52mm / 4 Screws) (2pcs/set)
ITP-802GSM-8PH24, ITP-802GTM-8PH24 & ITP-800M-8PH24
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising