Installation Instructions prior to Jan. 2005

Installation Instructions prior to Jan. 2005
ALTV244 Series
CCTV Power Supplies
Installation Guide
Models Include:
• ALTV244
- 24VAC @ 4 amp (100VA).
- Four (4) Fuse Protected
Outputs.
• ALTV244175
- 24VAC @ 7.25 amp (175VA)
or 28VAC @ 6.25 amp.
- Four (4) Fuse Protected
Outputs.
• ALTV244300
- 24VAC @ 12.5 amp (300VA).
or 28VAC @ 10 amp.
- Four (4) Fuse Protected
Outputs.
• ALTV244CB
- 24VAC @ 4 amp (100VA).
- Four (4) PTC Protected
Outputs.
• ALTV244175CB
- 24VAC @ 7.25 amp (175VA)
or 28VAC @ 6.25 amp.
- Four (4) PTC Protected
Outputs.
• ALTV244300CB
- 24VAC @ 12.5 amp (300VA).
or 28VAC @ 10 amp.
- Four (4) PTC Protected
Outputs.
Rev. 040704
Overview:
These Altronix CCTV Power Supplies provide 24VAC distributed via four (4) fuse or PTC protected outputs for
powering CCTV Cameras, heaters and other video accessories.
11
5V
50 AC
Cu /60H
rre z
nt Inp
ut
Nu
m
Ou ber
tp of
PT uts
C
Ou Pro
tpu tec
Fu ts ted
se
Ou Pro
tpu tec
Ou ts ted
tp
(m ut C
ax u
pe rren
ro t
utp
M
ain
ut)
Fu
se
Ra
tin
gs
Vo
lta
ge
Ou
tpu
t
Altronix
Model Number
To
ta
(P l Ou
ow tp
er) ut
Cu
rre
nt
Four (4) Output ALTV244 Reference Chart:
ALTV244
4 amp
24VAC
4
-
x
3.5 amp
5 amp/250VA
.9 amp
ALTV244CB
4 amp
24VAC
4
x
-
2.5 amp
-
.9 amp
7.25 amp
24VAC
4
-
x
3.5 amp 10 amp/250VA 1.5 amp
6.25 amp
28VAC
7.25 amp
24VAC
4
x
-
2.5 amp
6.25 amp
28VAC
12.5 amp
24VAC
4
-
x
3.5 amp 25 amp/250VA 2.7 amp
10 amp
28VAC
12.5 amp
24VAC
4
x
-
2.5 amp
10 amp
28VAC
ALTV244175
ALTV244175CB
ALTV244300
ALTV244300CB
-
-
1.5 amp
2.7 amp
Specifications:
•
•
•
•
•
Surge suppression.
AC power LED indicator.
Power ON/OFF switch
Unit maintains camera synchronization.
Ease of installation saves time & eliminates costly labor.
• Spare fuses included (on fuse protected models).
Enclosure Dimensions:
ALTV244, ALTV244CB, ALTV244175,
ALTV244175CB, ALTV244300 and ALTV244300CB
8.5”H x 7.5”W x 3.5”D
Installation Instructions:
1. Mount unit in desired location.
2. Slide switch SW1 to OFF position (Models ALTV244 and ALTV244CB), (Fig. 1, pg. 3). Turn off main switch on all
other models.
3. All units are factory set for 24VAC operation.
For 28VAC operation (for models with 24VAC/28VAC option only), adjust unit prior to mounting and applying
power as follows: Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].
4. Connect AC power to the two black and two white flying leads of the transformer (Fig. 1, pg. 3). Use 18 AWG or
larger for all power connections (Battery, AC output).
Keep power limited wiring separate from non-power limited wiring (115VAC 50/60Hz Input, Battery Wires).
Minimum .25” spacing must be provided. Use separate knockouts.
5. Measure output voltage before connecting devices. This helps avoid potential damage.
Terminals marked [1P - 4P] are positive (+) and terminals marked [1N - 4N] are negative.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the
output voltage.
6. Connect devices to terminals marked [1P - 1N through 4P - 4N] on PD4/PD4CB board (Fig. 1, pg. 3) carefully
observing correct polarity.
-2-
7. Slide switch SW1 to ON position (Models ALTV244 and ALTV244CB), (Fig. 1, pg. 3). Turn main switch on all other
models to the “RESET” (ON) position.
8. Green LED will illuminate when unit is powered.
9. Upon completion of wiring, secure enclosure door with screws (supplied).
Caution: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to all local codes
and in accordance with the National Electrical Code.
Terminal Identification:
PD4/PD4CB - Distribution Module
1P - 4P
Positive AC output.
1N - 4N
Negative AC output.
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient
magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user serviceable parts inside. Refer servicing to qualified service personnel.
-3-
MAIN FUSE
F4
JMP1
F3
MADE IN USA
F2
BROOKLYN, NY 11220
F1
ALTRONIX CORP.
ALTV244
OFF
SW1
PD4A
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
ON
POWER DISTRIBUTING UNIT
LED
N
1P
1N
2P
2N
3P
3N
4P
P
4N
INPUT
24VAC fused output 1
(Follow same procedure
using terminals 2P & N
thru 4P & N fused
outputs 2 thru 4)
White Lead
115 VAC input
50/60 Hz,
.9 amps
XFMR
Black Lead
MAIN FUSE
F3
MADE IN USA
F2
BROOKLYN, NY 11220
F1
ALTRONIX CORP.
ALTV244CB
F4
OFF
SW1
PD4A
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
ON
POWER DISTRIBUTING UNIT
LED
N
1P
1N
2P
2N
3P
3N
4P
4N
24 VAC circuit breakered output 1
(Follow same procedure
using terminals 2P & N thru
4P & N circuit breakered
outputs 2 thru 4)
White Lead
115 VAC input
50/60 Hz,
.9 amps
XFMR
Black Lead
-4-
P
INPUT
MAIN FUSE
F4
JMP1
F3
MADE IN USA
F2
BROOKLYN, NY 11220
F1
ALTRONIX CORP.
ALTV244175
SW1
PD4A
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
POWER DISTRIBUTING UNIT
LED
S
1P
1N
2P
2N
3P
3N
4P
N
P
4N
INPUT
24VAC or 28VAC fused output 1
(Follow same procedure
using terminals 2P & N
thru 4P & N fused
outputs 2 thru 4)
Power
Switch
Black
Lead
115VAC input
50/60 Hz,
1.5 amps
XFMR
White Lead
MAIN FUSE
F3
MADE IN USA
F2
BROOKLYN, NY 11220
F1
ALTRONIX CORP.
ALTV244175CB
F4
SW1
PD4A
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
POWER DISTRIBUTING UNIT
LED
S
1P
1N
2P
2N
3P
3N
4P
N
4N
24VAC or 28VAC circuit breakered 1
(Follow same procedure
using terminals 2P & N
thru 4P & N fused
outputs 2 thru 4)
Power
Switch
Black
Lead
115VAC input
50/60 Hz,
1.5 amps
XFMR
White Lead
-5-
N
P
INPUT
F3
1P
1N
2P
2N
3P
3N
4P
MADE IN USA
BROOKLYN, NY 11220
4N
PD4
S
LED
N
P
POWER DISTRIBUTING UNIT
F4
MAIN FUSE
INPUT
SW1
F2
F3
1P
1N
2P
2N
3P
3N
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
F1
4P
Transformer
underneath
power supply
board
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
F2
Transformer
underneath
power supply
board
F1
MADE IN USA
BROOKLYN, NY 11220
4N
S
-6-
N
LED
P
POWER DISTRIBUTING UNIT
PD4A
F4
MAIN FUSE
JMP1
INPUT
SW1
ALTV244300
Power
Switch
Black Lead
White Lead
ALTV244300CB
Power
Switch
White Lead
Black Lead
ALTRONIX CORP.
ALTRONIX CORP.
Enclosure Dimensions for:
• ALTV244
• ALTV244CB
• ALTV244175
• ALTV244175CB
• ALTV244300
• ALTV244300CB
8.5"H x 7.5"W x 3.5"D
TOP ONLY
-7-
Note:
Altronix is not responsible for any typographical errors.
Altronix Corp.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
II1ALTV244Series
D19D
MEMBER
-8-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising