SFP+ Direct Attach Passive Copper Cables 33-1400 - 33-1412 Features

SFP+ Direct Attach Passive Copper Cables 33-1400 - 33-1412 Features
SFP+ Direct Attach Passive Copper Cables
33-1400 - 33-1412
Features
Support for multi-gigabit data rates up to 10
Gb/s
Data rates backward compatible to 1 Gb/s
Hot-pluggable SFP 20PIN footprint
Improved Pluggable Form Factor(IPF)
compliant for enhanced EMI/EMC performance
Compatible to SFP+ MSA
Compatible to SFF-8431,SFF-8432
Temperature Range: 0~ 70 °C
RoHS Compatible
Applications
High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
Switched fabric I/O such as ultra high bandwidth switches and routers
Data center cabling infrastructure
High density connections between networking equipment
Product Description
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G
Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to
achieve high port density, configurability and utilization at a very low cast and reduced power budget.
The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry
standard requirements for performance and reliability.
Page 1 of 3
Feb 28 /2013
Recommended Operating Conditions
Parameter
Symbol
Storage Ambient Temperature
Operating Case Temperature
Systems
Tc
Min
Max
Unit
-40
+85
°C
0
+70
°C
Performance
Typical
Media
10 Gb/s line speed, full duplex
Hot-pluggable, industry-standard Small Form-Factor
Bit error rate: better than 10E-12
Pluggable(SFP+) copper cable, available as 7m.
Pin Descriptions
Pin
Logic
1
Symbol
Name/Description
VeeT
Transmitter Ground
Notes
2
LV-TTL-O
TX_Fault
N/A
1
3
LV-TTL-I
TX_DIS
Transmitter Disable
2
4
LV-TTL-I/O
SDA
Tow Wire Serial Data
5
LV-TTL-I
SCL
Tow Wire Serial Clock
MOD_DEF0
Module present, connect to VeeT
6
7
LV-TTL-I
RS0
N/A
1
8
LV-TTL-O
LOS
LOS of Signal
2
9
LV-TTL-I
RS1
N/A
1
10
VeeR
Reciever Ground
11
VeeR
Reciever Ground
RD-
Reciever Data Inverted
12
CML-O
13
CML-O
RD+
Reciever Data Non-Inverted
14
VeeR
Reciever Ground
15
VccR
Reciever Supply 3.3V
16
VccT
Transmitter Supply 3.3V
17
VeeT
Transmitter Ground
18
CML-I
TD+
Transmitter Data Non-Inverted
19
CML_I
TD-
Transmitter Data Inverted
VeeT
Transmitter Ground
20
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Page 2 of 3
Feb 28 /2013
Mechanical Dimensions
Ordering information
Note: You can be customized diameter and distance.
Part Number
33-14xx
Length(meter)
1
2
3
4
5
6
7
Wire gauge(AWG)
30
30
30
24
24
24
24
Page 3 of 3
Feb 28 /2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising