DN-70495_qig_English_20160215

DN-70495_qig_English_20160215
Quick Installation Guide
DN-70495
LED Indicator and Button Status Description
LED Indicator Description:
Power: Indicate the power status
WAN/LAN: Indicate the Ethernet connection status
WLAN: Indicate the wireless connection status
WPS &Reset button:
Press 1 second to enter into WPS encryption
Press 10 seconds to reset to default setting
Preparing for setup: If running under Windows Vista or Windows7/8/10 systems, Please
follow the below steps
1.
2.
3.
4.
From the Start menu on your desktop, first
go to Control panel, then select Network
and Internet. Please go to Network and
Share center to change adapter setting
and then select local area connection and
right-click to get into Properties.
Click Internet Protocol(TCP/IPv4),
and select Properties button.
In the IP address field, enter the address 192.168.1.x
(x should be replaced by a number between 2 and
253, such as 101). In the Subnet mask field, enter
255.255.255.0, click confirm button and then return
to last interface to click confirm for finish
Input the website http://192.168.1.254 with Internet
explorer, and press enter to login the setting user-interface
Preparing for setup: If running under Windows XP system, Please follow the below steps
1. Double click the Network Neighbor from your computer desktop.
Please go to local area connection. Do right-click with the mouse to enter
Properties.
2. Click Internet Protocol (TCP/IPv4), and select Properties button.
3. In the IP address field, enter the address
192.168.1.x (x should be replaced by a number
between 2 and 253, such as 101). In the Subnet
mask field, enter 255.255.255.0, click confirm
button and then return to last interface to
click confirm for finish.
4. Input the website http://192.168.1.254 in
Internet explorer address, press enter
to get into setting interface
AP mode
Under AP mode, DN-70495 can provide wireless access to internet by connecting
DN-70495 to a router.
AP mode application diagram
AP Mode:
1 No need to setup the installation for AP mode
2 Suitable for office, hotel, home and meeting room application
3 Switch to AP mode, the device will be get the internet directly
4. Converting LAN switch to WLAN easily to enjoy WiFi sharing function
1. After entering into the setup interface, for security encryption please:
① Change the SSID (the name should be letter or digital, but no others) if necessary
② Select the encryption mode and input the password, then click Apply to finish
2. After this setup is done, you will see the setting information from the red frame,
then close the page and start to use it.
Repeater Mode
Under the Repeater Mode, It can extend the wireless cover area and allow the other
devices to connect to wireless networking
Repeater Mode work diagram
Repeater set up step:
1. Connect DN-70495 to power socket with USB power adapter or USB interface to the
Notebook / Television to provide +5Vdc power input;
2. Switch to Repeater mode.
Setups
Step1
① Select Enable Repeater and input the repeater name if needed.
② Select the SSID of the wireless router/AP to connect.
③ Input the password for the SSID
④ Click connect button, wait for a minutes to get the connection completed
Step2
Below information will be shown after the setup is finished:
① Status is Connected.
② The information for local networking is also shown: IP address, MAC address, etc
Client Mode
Under the Client Mode, DN-70495 can Ethernet-enable the computer or gaming console
through wireless interface.
Client Mode work diagram
Client mode setup step:
① Connect DN-70495 to power socket with USB power adapter or through USB
interface to Computer / Notebook / Television.
② Switch to Repeater mode
Setups
Step1
① Unselect to disable Repeater
② Select the SSID for connection
③ Input the password for the SSID
④ Click connect button, and wait for a minute to get the connection completed
Step2
Below information will be shown after the setup is finished:
① Status is Connected.
② The information for local networking is also shown: IP address, MAC address, etc
Frequently Asked Questions
FAQ1: The light does not light up. Why?
1. Check if the power adapter matches 5V/500MA-2000MA
2. Check if the USB connector is connected
FAQ2: Why am I not able to enter the webpage (http://192.168.1.254)?
1. Check if the device is connected to the computer, and check if the LAN indicator is
flashing
2.Confirm whether the web browser can support Java or not
3. Press the WPS button for 10 seconds to reset to the default setting
4. Power Off and On DN-70495
FAQ3: What to do when you forget the wireless password?
If you forget the wireless password, please press the WPS button for 10 seconds to reset
to factory default setting
FAQ4: Why am I not able to access the internet after configuration is finished?
Under the repeater mode:
If it cannot access internet or network is limited, please re-enter the correct SSID
password. The password must be wireless router’s security password.
Under AP mode:
Check if the router or switches is working normally
Check the LAN connection is working or not
Make sure the AP mode is set with the slide switch.
FAQ5: How much distance can the AP cover?
Usually, it can cover at least 20 meters, but this depends on specific environment and
the wireless devices at the other side.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 1999/5/EC and the Directive 2011/65/EC for RoHS compliance. The
complete declaration of conformity can be requested by post under the below mentioned
manufacturer address.
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising