Wall
WALL-MOUNTING CASES
WA L L - M O U N T I N G C A S E S
Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages.
Stand: 11/99 e Copyright © 1999 OKW Gehäusesysteme KG, Buchen, Germany (http://www.okw.com)
65
WA L L - M O U N T I N G C A S E S
A modular assembly system
Base
A P P L I C AT I O N S
Can be mounted to the wall
and fully wired before final
assembly of the case.
Well-proven in heating,
ventilation and air conditioning systems, in pool and
sauna applications. And for
industrial control systems.
Mounting rails
(extendible)
They permit concealed
mounting of the case and
prevent unauthorized removal of the units.
WALL-MOUNTING CASES
Corner posts
A S S E M B LY
For screwless mounting of
the front panel. The control
elements can be connected
to the assemblies ready for
use.
In three simple steps:
Supports*
Increase the rigidity of the
front panels when keys and
plug connectors are installed.
1. Fix the base part on the
wall by means of mounting
rails.
Front panel*
With screwless mounting the
whole panel can be used for
controls and labels.
Case frame
Can be removed independent of assemblies, front
panel and cable connections.
Transparent cover
With knurled screw for the
protection of the control
elements.
Cable plate
For cable fitting in terminal
compartment. 46 inline
terminals, also for throughway PCBs.
Terminal compartment
cover
Can be separately removed
from the case frame and can
be secured to prevent unauthorized opening.
An OKW development with removable case frame.
Free access to the interior from all sides. This helps
equipping and connection work. It is possible to remove
the case frame and refix it even after the unit has been
wall-mounted – a special advantage during servicing.
Available with and without transparent cover.
2. Mount the front panel.
It snaps in place and rests
without any screws upon
four corner posts resp.
two additional supports.
Set of locking bars*
Facilitates the removal of
the case frame even on fully
fitted units.
*separately available, must
be ordered with every case.
66
3. Mount the case frame and
lock it with the set of
terminal bars. Fix the cover
of the terminal compartment
with screws.
WA L L - M O U N T I N G C A S E
A modular assembly system
M AT E R I A L
S TA N D A R D
COLOURS
Case parts in high-impact
polystyrene (UL 94 HB).
Case frame and cover for
terminal compartment
off-white, RAL 9002,
base part pebble grey,
RAL 7032.
Please refer to colour chart
page 214.
Transparent cover in Luran.
Matt anodized aluminium
front panel, thickness
2.0 mm.
WALL-MOUNTING CASES
Also available in other
materials on request. Please
refer to the specifications
on pages 215-217.
Detailed drawing available on demand in dwg or dxf format.
M O D I F I C AT I O N S
AS PER
CUSTOMER’S
REQUIREMENTS
See pages 210-213.
CASE
Outside dim. in mm
W
H
D
214
263
114
214
263
147
ACCESSORIES
Article
Front panel
Front panel
Set of locking bars
Set of supports
Version
Part-No.
without transparent cover
with transparent cover
A 96 24 065
A 96 24 165
Version
for case without transparent cover
for case with transparent cover
for quick locking / unlocking the case frame to / from the base
with fastening screws
A 91 24 001
A 91 24 002
A 91 24 003
A 91 24 004
67
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising