◆ 3.5" SCSI DoubleDrive Quick guide to installation

◆ 3.5" SCSI DoubleDrive Quick guide to installation
◆
Quick guide to installation
3.5" SCSI DoubleDrive
for all operating systems with SCSI support
Please observe the following
points carefully:
The 3.5" SCSI DoubleDrive does not need a device-specific driver.
• Observe the general guidelines
when handling components or
modules which can be damaged by
electrostatic charge or discharge.
Installation
Please print out the User Manual for the 3.5" SCSI DoubleDrive and
refer to the information provided in the user manual.
User Manual for the 3.5" SCSI DoubleDrive
• If you should encounter any problems during the installation or use
of this product, please contact our
service department and ask for
advice. If you do not do this, your
guarantee rights may be impaired.
Support hotline, Monday to Friday,
11 am to 3 pm German time (CET):
Phone +49-5 11-9 83 81-70 or eMail
support@altec-computersysteme.com
altec ComputerSysteme GmbH
Bayernstraße 10 · 30855 Langenhagen · Germany
Phone +49-5 11-9 83 81-0 · Fax +49-5 11-9 83 81-49
eMail: info@altec-computersysteme.com
Web: www.altec-computersysteme.com
Technical data subject to change without prior notice. All brand and product names are trademark of their respective owners.
© 2003 altec ComputerSysteme GmbH. Version >Double_SCSI_Inst_e10< >09/03<
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
3.5" SCSI DoubleDrive
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising