R&S®ZV-Z36 Calibration Kits
Titel.indd 1
Data Sheet | 01.00
Test & Measurement
R&S®ZV-Z36 Calibration Kit
Specifications
31.07.2008 13:42:42
Specifications
Specifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental
conditions met, calibration cycle adhered to, and all internal automatic adjustments performed. "Typical values" are designated with
the abbreviation "typ." These values are verified during the final test but are not assured by Rohde & Schwarz. "Nominal values" are
design parameters that are not assured by Rohde & Schwarz. These values are verified during product development but are not
specifically tested during production.
Rohde & Schwarz equipment is designed for reliable operation up to an altitude of 3000 m above sea level, and for transport up to an
altitude of 4500 m above sea level.
Measurement range
Connectors
Impedance
Frequency range
2
®
R&S ZV-Z36 Calibration Kit
2.4 mm female and 2.4 mm male
50 Ω
0 Hz to 50 GHz
Version 01.00, August 2008
Effective system data
The specified effective system data are established after performing a suitable system error calibration, e.g. TOSM, at a vector
®
®
®
network analyzer R&S ZVA, R&S ZVB, or R&S ZVT, using the the characteristic data of the calibration kit, which are stored on a
provided USB-stick. This data is valid between +18 °C and +28 °C, at a measurement bandwidth of 10 Hz, and a nominal power of
−10 dBm at the calibration ports. The calibration kit is fully functional down to 0 Hz, with effective system data as specified below,
although the data is only verified for frequencies as stated.
Directivity
Source match
Reflection tracking
Load match
Transmission tracking
Version 01.00, August 2008
10 MHz to 700 MHz
700 MHz to 24 GHz
24 GHz to 50 GHz
10 MHz to 700 MHz
700 MHz to 24 GHz
24 GHz to 50 GHz
10 MHz to 700 MHz
700 MHz to 24 GHz
24 GHz to 50 GHz
10 MHz to 700 MHz
700 MHz to 24 GHz
24 GHz to 50 GHz
10 MHz to 700 MHz
700 MHz to 24 GHz
24 GHz to 50 GHz
>30 dB, typ. 40 dB
>40 dB, typ. 46 dB
>30 dB, typ. 36 dB
>30 dB, typ. 40 dB
>34 dB, typ. 40 dB
>26 dB, typ. 36 dB
<0.3 dB, typ. 0.1 dB
<0.3 dB, typ. 0.1 dB
<0.3 dB, typ. 0.2 dB
>30 dB, typ. 40 dB
>30 dB, typ. 36 dB
>26 dB, typ. 33 dB
<0.2 dB, typ. 0.1 dB
<0.1 dB, typ. 0.05 dB
<0.3 dB, typ. 0.2 dB
®
R&S ZV-Z36 Calibration Kit
3
General data
Temperature loading
Calibration interval
Dimensions (W × H × D)
Weight
Shipping weight
4
®
R&S ZV-Z36 Calibration Kit
operating temperature range
permissible temperature range
storage temperature range
+18 °C to +28 °C
0 °C to +50 °C
–40 °C to +70 °C
in line with IEC 60068-2-1 and
IEC 60068-2-2
1 year
336 mm × 66 mm × 270 mm
13.2 in × 2.6 in × 10.6 in
1400 g (3 lb)
4 kg (9 lb)
Version 01.00, August 2008
Ordering information
Designation
Type
Calibration Kit 2.4 mm, 0 Hz to 50 GHz
R&S ZV-Z36
Version 01.00, August 2008
®
Order No.
1305.5900.02
®
R&S ZV-Z36 Calibration Kit
5
Service you can rely on
J In
70 countries
J Person-to-person
J Customized
and flexible
with a warranty
J No hidden terms
J Quality
Regional contact
Europe, Africa, Middle East
+49 1805 12 42 42* or +49 89 4129 137 74
customersupport@rohde-schwarz.com
North America
1-888-TEST-RSA (1-888-837-8772)
customer.support@rsa.rohde-schwarz.com
Latin America
+1-410-910-7988
customersupport.la@rohde-schwarz.com
Asia/Pacific
Certified Quality System
Certified Environmental System
+65 65 13 04 88
ISO
9001
ISO
14001
DQS REG.
NO 1954 QM
DQS REG. NO 1954 UM
customersupport.asia@rohde-schwarz.com
For product brochure,
see PD 5213.9405.12
Rohde & Schwarz
GmbH & Co. KG
andMühldorfstraße
www.rohde-schwarz.com
15 | 81671 München
(search
term:
Typbezeichnung)
Phone
+49 89 41 290
| Fax +49 89 41 29 121 64
www.rohde-schwarz.com
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners | Printed in Germany (as)
PD 5213.9405.22 | Version 01.00 | July 2008 | R&S®ZV-Z36
Subject to c
­ hange
*0.14 €/min within German wireline network; rates may vary in other
­networks (wireline and mobile) and countries.
Titel.indd 2
31.07.2008 13:42:42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising