OPWG-29-46

OPWG-29-46
Little
GIANT
Out-of-Pond
WG Pumps
Pump Company
OPWG-29/46
Features
+ Thermally protected, enclosed, fan cooled, permanent
split capacitor motor
+ 2" FNPT Intake and 1-½" FNPT discharge ports
+ Motors are enclosed for excellent protection and
weather resistance
+ Low power consumption
+ For larger systems, plumb two or more units in parallel
to economically multiply the flow
Construction
+ Volute — Glass-Filled Polypropylene
+ Volute Cover — Glass-Filled Polypropylene
+ Impeller — Glass-Filled Noryl®
+ Shaft Seal — Carbon/Ceramic
Cost Saving Efficiency
The Little Giant Professional Series of Pumps produce a maximum flow rate with minimal electrical consumption. The
dollars saved from reduced operating costs can pay for the pump in a matter of months.
Safety
The Professional Series are end suction centrifugal pumps, designed to be located on the perimeter of the pond. This
eliminates the need for wading into the pond to service the pump or pump intake filter. By locating the pump outside of the
pond, you also greatly reduce the chance of electrical shock.
Reliability
The Professional Series was designed with the Professional in mind. Built tough, the pump housings are injection-molded
of corrosion resistant thermoplastics, and are mounted to custom-built motors. Each Professional Series Pump is
thoroughly tested prior to shipment. After proper installation, your pump will provide years of dependable, trouble free
service.
Quiet Operation
Install these pumps wherever you desire. The Professional Series was designed for water gardening, not industrial
applications, generating noise levels equivalent to a small electrical fan at 52 dB.
OPWG-29/46
Specifications
Model
No.
OPWG-29
OPWG-46
Item
Discharge
No.
Size
Intake Size Listing(s)
566020 1-1/2" FNPT 2" FNPT
UL/CSA
566021 1-1/2" FNPT 2" FNPT
UL/CSA
HP
1/8
1/8
Volts
115
115
Hertz
60
60
Amps
1.1
1.3
Watts
92
132
Performance (GPM @ Head)
2.5'
5'
7.5'
10'
37
55
29
46
25
50
75
100
125
150
175
200
225
14
4.0
12
3.5
10
3.0
8
2.5
2.0
6
1.5
4
HEAD - METERS
HEAD - FEET
5
26
11
12
4.8
5.2
Pwr. Cord
(ft)
8
8
Weight
(Lbs.)
9.12
9.14
Height
7.00
7.00
Length
10.50
10.50
Width
6.80
6.80
Replacement Parts
FLOW - LITERS/MINUTE
0
20
37
Shut Off
Feet
PSI
Part No.
166200
166201
166205
166207
166209
924041
926045
Description
Impeller OPWG 29
Impeller OPWG 46
Bracket
Volute
Drain Plug w/O-Ring
O-Ring, Volute
Seal Assy., Ceramic/Carbon
1.0
2
OPWG-29
OPWG-46
0.5
0
0.0
0
5
10 15 20 25 30 35 40 45 50
FLOW - GALLONS/MINUTE
55 60
Little Giant Pump Co.
PO Box 12010
Okla. City, OK 73157
Phone: 405.947.2511
Fax: 405.228.1550
www.LittleGiantPump.com
Form 995171 — 02/01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising