Advertisement
Advertisement
Quick Start
Guide
Simple Steps
To Get Your
Up and Growing
KEEP
Add
Nutrients
THIS GUIDE
Replace
Bulbs
Date Code:
!
Space•Saver 6 Model #s – 100602-BLK; 100602-WHT;
100602-SLR; 100603-BSS
Input Voltage: 120V, 60Hz, 1.5A
1
IMPORTANT SAFETY INSTRUCTIONS
(SAVE THESE InSTrUcTIonS)
When using this AeroGarden Space•Saver 6 electrical furnishing, basic precautions should always be followed, including the following:
read all instructions before using this AeroGarden furnishing.
1. To reduce the risk of electric shock, the Space•Saver 6 has a specific plug. Do not change the plug in any way.
DANGER
– to reduce risk of electric shock:
2. Always unplug Space•Saver 6 from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).
WARNING
– to reduce risk of burns, fire, electric shock, or injury to persons:
3. Unplug Space•Saver 6 from outlet before putting on or taking off parts.
4. Close supervision is necessary when Space•Saver 6 is used by or near children, invalids, or disabled persons.
5. Use Space•Saver 6 only for its intended use as described in the instructions. Do not use attachments not recommended by
manufacturer.
6. Never operate Space•Saver 6 if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or your country’s local distributor for instructions.
7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs.
16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe &
Australia) Grow Bulbs with this Space•Saver 6 model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from www.aerogardensupport.com or from your retailer.
17. Do not use Space•Saver 6 for other than intended purpose.
18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the Space•Saver 6 and in the accompanying literature.
20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard.
21. Electrical wiring must be in accordance with local regulations.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety.
23. Children should be supervised to ensure they do not play with the appliance.
SAvE THESE INSTRUCTIONS
1
Quick Start Assembly
(No tools re quired)
A
Unpack Your Space•Saver 6
Lamp Hood
(front view)
Deluxe B
Grow Bulbs (2)
B
Insert Lamp Arm into Base
Push
Lamp Arm down until you hear a “click.”
Lamp Arm
(back view)
Base
(back view)
Bowl
Lamp Arm
(back view)
Add
Nutrients
Replace
Bulbs
Base
(front view)
Seed Kit
C
Insert Deluxe B Grow Bulbs into Lamp Hood
Lamp Hood
(bottom view)
D
Plug Lamp Cord into Lamp Hood
Push Lamp Cord firmly into socket in
Lamp Hood.
Lamp
Cord
Push straight in.
DO NOT TWIST BULBS!
remember to replace Grow Bulbs every 6 months.
Instructions continued on next Page
2
1
Quick Start Assembly
(continued
)
E
Place Lamp Hood on Lamp Arm
F
Set Bowl into Base
Center hands over
Lamp Arm and push
Lamp Hood down until you hear a “click.”
(back view)
G
Moving Your Space•Saver 6
Use one hand to grasp Lamp Arm.
Air Coupling
(front view)
Add
Nutrients
Replace
Bulbs
Be sure that Bowl is securely seated on Air coupling in Base.
nEED ADDITIonAl HElP?
For supplies and information, visit…
www.aerogardensupport.com
3
Gently slide your Space•Saver 6 toward the surface edge and place other hand under Base.
H
Place Your Garden
On: A sturdy, watertolerant surface
(Metal surfaces may cause noise due to vibration)
Under: A space that allows 22” (56cm) clearance for the full height of raised lamp
In: A 60-75°F
(16-24°C) environment
(optimal)
Near: A standard electrical outlet, per local regulations
note: Do not place beneath under-cabinet lights.
68°F/20°C
Away From
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
2
Planting Your Garden
A
Add Water Using a Spouted Container
Lift View Door
Water level indicator gradually changes from red to green as water is
added. Water level indicator is GREEN when Bowl is full.
FILL TO
HERE
Fill to “Fill To Here”
( located below
View Door)
When additional water is needed, water level indicator will be Red. Add water to raise level up to “Fill To Here” inside Bowl.
It is okay to add water up to “Fill To Here” before water level indicator turns red.
Amount of
Water To Be
Added:
3 quarts or...
2.8 liters
Use room temperature municipal tap, bottled or purified water. Do not use well or softened water.
5
B
Plan Your Garden Layout
For best results plant Seed Pods labeled…
”Tall” – in Back or Front center openings (see diagram below)
”Medium” – in Front center or Back openings
”Short” – in Front Side openings
Back
Genovese Basil
(Sprouts in 3-7 days)
Tall
Grow Surface
Use height information on Seed Pod
Label to decide where to place each
Seed Pod in Grow Surface.
note: location of Seed Pod in Grow Surface does
not matter if all plants are the same height.
Front Side
Front Center
Front Side
C
Plant Your Garden
If you are planting…
Herbs or Flowers - arrange Seed Pods by plant height (see “Plan Your Garden Layout” on page 5).
Tomatoes or Peppers - place one Seed Pod in each Front Side opening and one Seed Pod in either Back opening. Plant Spacers should be placed in Front center and remaining Back openings.
Green Beans or Salad Greens - place Seed Pods anywhere, all plants are the same height.
Master Gardener Kit - arrange Pods in Grow Surface according to plant height. Re-arranging may be required as plants grow.
Create a Custom Garden – combine two AeroGarden 3 Seed Kits.
Important guidelines to consider when combining Seed Kits…
•
Only combine kits from the same Series, e.g., flower with flower, herb with herb, etc.
•
Consider plant height when combining Seed Pods from two 3-pod Seed Kits. Refer to “Plan Your Garden
Layout” on page 5, when deciding where to place Seed Pods in your Space•Saver 6.
•
Use two nutrient tablets for each feeding.
–
Use both individual Starting Nutrients from each 3-pod Seed Kit when planting your Space•Saver 6.
–
All Other Feedings – use Growing Nutrients from one Seed Kit (2 at a time) until they are gone, then use the other Growing Nutrients from second Seed Kit.
Insert Seed Pods into Grow Surface openings. Check to see that…
• There is a Seed Pod or Plant Spacer in every opening.
• Seed Pod Labels are facing forward for easy identification.
Bio-Domes
™
Nutrients
Seed Pod
Grow Surface
Replace
Bulbs
6
2
Planting Your Garden
(continued
)
D
Place Bio-Domes on Seed Pods
Bio-Dome
note: Do not remove Bio-Domes until seeds
have sprouted. nEVEr rEMoVE SEED
POD LABELS.
Place a Bio-Dome on each Seed Pod.
Add
Nutrients
Replace
Bulbs
E
Add Starting Nutrient Tablets and Record Planting Date
Record Planting Date
Record the date you planted your Space•Saver 6 on the front cover of the Guide that came with your Seed/Plant Kit.
7
Add 2 tablets* from bag labeled
“Starting Nutrients” directly into Bowl.
See "Add Nutrients" (Feed Garden - Basic Feeding) on page 11 of
this guide for additional feeding instructions.
*When combining two AeroGarden 3 Seed Kits, be sure to use 2 nutrient tablets when feeding your Garden (see “create a custom Garden” on page 6).
Add
Nutrients
Replace
Bulbs
3
Starting Your Garden
A
Plug Cord into Electrical Outlet
What will happen…
1
A green light on the Control Panel willl come on.
2
3
Grow Bulbs will come on.
Look under Lamp Hood to see if both bulbs are lit.
If not
, check to see if:
•
Grow Bulbs are properly inserted into
Lamp Hood (see page 2, step 1C).
•
Lamp Cord is plugged into Lamp Hood
(see page 2, step 1D).
•
You are getting power through the electrical outlet.
Air bubbles should be visible inside Bowl.
If not
, check to see if:
• Bowl is securely seated on Air Coupling in Base (see page 3, step 1F).
Plug in
B
Select Setting
Press SELECT button until you reach the type of plants you are growing (Salad Greens, Herbs, etc.)
Add
Nutrients
Herbs
Salad
Greens
Flowers
Replace
Bulbs
Vegetables Live Plants
Add
Nutrients
Replace
Bulbs
note: Depending on the plant type selected, your
Space•Saver 6 lights will automatically turn on and off at pre-programmed intervals.
24-Hour
Light
8
3
Starting Your Garden
(continued
)
C
Your Light Timer
1
Your Light Timer is Set To Start
Growing Your Plants...Starting now!
2
If You Would Like to Change the
Time of Day Your Lights Go Off...
See page 10.
•
Your lights will stay on for about 16 hours and will shut off for about 8 hours*.
•
Your lights will come on every day at the time you plugged in your Space•Saver 6.
*Except when using “24-Hour light” setting (Elite models only, see below), which sets lights to be on for 24 hours.
Space•Saver 6 Elite “24-Hour Light” Setting
The “24-Hour Light” setting allows you to override the built-in light timer and keep the lights on 24 hours a day. You can also customize the amount of light plants receive by manually turning lights on and off using the
“Lights” button, or setting automatic on/off times, using a standard light timer.*
Use the “24-Hour Light” setting when growing plants that thrive with continual light and moisture, such as leafy greens and some herbs.
For the more experienced gardener, the “24-Hour Light” setting provides added flexibility when planting a custom garden. You are no longer limited to the preprogrammed light schedules associated with each plant type (such as Vegetables, Herbs, etc.).
noTE: The “24-Hour light” setting is not recommended for
Flower or Vegetable plants – they require a daily dark period to produce flowers.
Space•Saver 6 Elite – “24-Hour Light “ Setting
• Press and release “Select” until white light next to
“24-Hour Light” is illuminated.
• To exit “24-Hour Light” setting, simply push the “Select” button.
* not included. If you use a light timer to turn lights on and off, the nutrient timer and pump will stop whenever lights are oFF. Both will start up again when lights turn back on. nutrient timer does not record the time elapsed when lights are off. To ensure your plants are fed every 2 weeks, we recommend keeping track of your feeding schedule on a calendar.
9
Add
Nutrients
Replace
Bulbs
24-Hour
Light
Select Illuminated “24-Hour Light”
Once your Space•Saver 6 Elite is set on “24-Hour Light” setting, lights will remain on 24 hours a day. To shorten the amount of time lights are on, quickly press and release “lights” button, and lights will turn off. lights will automatically come back on within 12 hours – or, you can press and release the “lights” button again, to turn lights back on.
Personalize Your Light Timer
(optional
)
Your Space•Saver 6 has lights and a built-in timer that automatically provide your plants with “sunlight” (about 16 hours) and “night” (about 8 hours). As long as your plants get this amount of light, it does not matter when the lights are turned off.* Many people find it convenient to have the lights go on in the morning and off at night to match their own wake and sleep schedule.
*The exceptions to this are Flower & Vegetable plants. They require a daily dark period in order to produce flowers. If your plants will receive any room light during the day (natural or artificial), we recommend setting your Space•Saver 6 lights to be on during the day.
5 Simple Steps...
To make this as easy as possible, you only need to set the time you want your Space•Saver 6 lights to go off (Off Time) and your built-in light timer automatically sets the On Time...nothing more for you to do.
Do the following to set the time you want your lights to go off:
1
2
3
4
5
Decide when you want the lights to go OFF.
AT THAT TIME check that lights are on. If they are off, quickly press and release “Lights” button.
(Lights must be on to reset timer.)
With lights on, press and hold “Lights” button until the light next to the plant type you selected starts blinking – about 5 seconds.
Release the button.
When blinking stops (about 9 seconds), the lights will go off and your lights are now set to go off at this time every day.
You can reset your timer as often as you wish.
Herbs
Flowers
Vegetables Live Plants
Blinking Light
(if you selected Herbs)
Lights Button
Add
Nutrients
Replace
Bulbs
Blinking Light
(if you selected Herbs)
24-Hour
Light
Lights Button
In case of power failure, your Space•Saver 6 has a backup system that stores light, nutrient & replace bulbs timers and plant selection settings. When power is restored, your Space•Saver 6 will go back to the Off-On cycle you have set.
10
Basic Reminders About Your AeroGarden
Space•Saver 6 control Panel
ADD NUTRIENTS (Feed Garden - Basic Feeding)
When “Add Nutrients” light illuminates (every 2 weeks), add 2 nutrient tablets and fill Bowl with water up to “Fill
To Here.” Press “Reset” button to restart nutrient timer and turn off light.
SELECT
The number of hours lights are on and off depends on which plant type is selected.
Add
Nutrients
REPLACE BULBS
When light illuminates (after 6 months of use), it is time to replace Deluxe B Grow Bulbs. Additional Grow Bulbs can be ordered at www.aerogardensupport.com or from your retailer. After replacing Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off light.
Replace
Bulbs
LIGHTS ON/OFF
Use to occasionally override built-in light timer.
Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle and occasional use of this feature will not harm your plants.
Space•Saver 6 Elite control Panel
ADD NUTRIENTS (Feed Garden - Basic Feeding)
When “Add Nutrients” light illuminates (every 2 weeks), add 2 nutrient tablets and fill Bowl with water up to “Fill To Here.” Press “Reset” button to restart nutrient timer and turn off light.
11
Add
Nutrients
Replace
Bulbs
REPLACE BULBS
When light illuminates (after 6 months of use), it is time to replace Deluxe B Grow Bulbs.
Additional Grow Bulbs can be ordered at
www.aerogardensupport.com or from your retailer. After replacing Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off light.
SELECT
The number of hours lights are on and off depends on which plant type is selected. Use
“Select” button to reach “24-Hour Light” setting
(see page 9).
24-HOUR LIGHT
White light indicates
Space•Saver 6 Elite is on
24-Hour Light setting.
24-Hour
Light
LIGHTS ON/OFF
Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle and occasional use of this feature will not harm your plants.
Basic Reminders About Your AeroGarden
(continued
)
Raise Lamp Hood (lights)
As plants grow to 1-2” from lights, raise the Lamp Arm one notch at a time. Be sure Lamp Arm is set at the lowest setting when you start your AeroGarden.
1
2
3
4
Unplug Space•Saver 6 and remove Bowl from Base.
Hold Lamp Arm where it connects to Lamp Hood with one hand.
With other hand, push in Locking Lever.
Release Locking Lever while pulling up on Lamp Arm.
Locking Lever will automatically click into next notch in Lamp Arm.
Replace Bowl on Base and plug in Space•Saver 6.
note: When lowering Lamp Hood, be sure to hold Lamp Arm
to avoid crushing plants.
Locking Lever
Replace Grow Bulbs –
order replacement bulbs at www.aerogardensupport.com
Add
Nutrients
Replace
Bulbs
Space•Saver 6 Elite control Panel
When “Replace Bulbs” light on control Panel begins to blink after 6 months of use…
• Unplug Space•Saver 6.
• Remove old Grow Bulbs and carefully discard*.
IMPorTAnT: To avoid burning, be sure Grow Bulbs are cool before handling.
• Insert new Grow Bulbs into Lamp Hood.
• Plug in Space•Saver 6 and press and release “Reset” button to restart grow bulb timer.
Replace
Bulbs
Space•Saver 6 control Panel
Early Grow Bulb Replacement
If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to restart grow bulb timer as follows:
• Press and hold “Lights” button until white light next to your selected plant type starts blinking – about 5 seconds.
• Release “Lights” button. Plant type selected light will continue to blink for about 9 seconds. While plant light is still blinking…
• Quickly press and release “Reset” button. “Replace Bulbs” light will blink once and plant selected light will stop blinking.
*Check with local recycling authorities for light bulb recycling availability in your area.
12
Prepare For Your Next Garden
13
Cleaning Instructions for your Space•Saver 6
Use only water and mild soap when cleaning your Space•Saver 6 (except when Sanitizing - Step 6). Do not use abrasive cleaners or run through the dishwasher.
When your Garden has completed it’s growing cycle…
1
Unplug Space•Saver 6.
2
Carefully remove Bowl and Grow
Surface from Base and bring to a sink. Set Base and Lamp Hood aside.
NEVER SUBMERSE BASE AND
CONTROL PANEL IN WATER.
3
4
Remove Grow Surface from Bowl and place on a counter near sink.
Empty contents of Bowl in sink.
Do not pour water on houseplants. Nutrient mixture may be too concentrated for them.
5
6
Remove Seed Pods and plants from Grow Surface.
• Pull Seed Pods out of Grow Sur-
face openings.
• Throw away Seed Pods and plant debris (plant growth and roots).
If you compost, plant debris can be composted.
Sanitize Space•Saver 6.
• Fill Bowl ¾ full with water.
• Add ¼ cup (59ml) of chlorine bleach.
• Let sit for 2 minutes.
• Using sanitizing water, wipe
Grow Surface and Bowl with soft cloth or sponge.*
*Gloves recommended.
• Scrub underside of Grow
Surface with soft scrub brush to remove any tangled roots.
• Empty bleach water from Bowl.
Grow Surface
Plant
Growth
Seed
Pod
Roots
7
Rinse Bowl and Grow Surface with tap water. Repeat.
8
Towel dry Bowl and Grow Surface before putting them back together and setting them on Base.
9
If Grow Bulbs have been in use more than 6 months, they should be replaced at this time (see page 12).
Your AeroGarden is now ready for replanting.
!
Bundle cord when furnishing is not in use.
Prepare For Your Next Garden
(continued
)
Replanting Your AeroGarden
If you have already grown a garden in your Space•Saver 6, please follow the instructions below to reset the nutrient timer:
• Press and HOLD “Reset” button until red “Add Nutrients” light blinks (approximately 6 seconds).
• Release “Reset” button. “Add Nutrients” light will turn off.
• Your Space-Saver 6 is now reset.
(In some cases you may see other lights blink as well. This is nothing to worry about.)
Reset
Add
Nutrients
Add Nutrient
Replace
Bulbs
Reset
Add
Nutrients
Replace
Bulbs
Add Nutrient
24-Hour
Light
More Reminders…
REMOvE BIO-DOMES
When plants appear through the hole in the Seed Pod Labels, remove Bio-Dome and discard or recycle.
WATER LEvEL LOW
When indicator is RED, add water to “Fill To Here” below
View Door.
Water level indicator gradually changes from red to green as water is
added. Water level indicator is completely GREEN when Bowl is full.
Water level Indicator
Grow Surface
View Door
14
U.S. CAUTION – You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
noTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; or, Consult the dealer or an experienced radio/TV technician for help.
To reduce the risk of electric shock, this furnishing has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER UN CHOC ÉLECTRIQUE,
PRÉSENTER LA LAME LARGE À LA FENTE LARGE ET
POUSSER JUSQU’AU FOND.
© 2008 AeroGrow International, Inc., Boulder, CO U.S.A. U.S. Patents Pending
5/7/08
Advertisement
