C-WGSW-48040HP s
WGSW-48040HP
L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP
Managed Switch with Hardware Layer 3 IPv4/IPv6 Static Routing
Physical Port
Key Features
• 48-port 10/100/1000Base-T RJ-45 copper with IEEE
802.3at / 802.3af Power over Ethernet Injector function
• 4 SFP shared combo interfaces, SFP(Mini-GBIC) supports
100/1000Mbps dual mode, shared with Port-45 to Port-48
• RJ-45 to RS-232 console interface for basic management
and setup
Ideal Combination of Power over Ethernet Solution and Layer 3 Static
Routing
Power over Ethernet
• Complies with IEEE 802.3at High Power over Ethernet
The WGSW-48040HP is PLANET’s first one 48-port Layer 2 Plus 802.3at PoE
Managed Gigabit Switch, which provides high density performance and supports IPv4
and IPv6 Layer 3 static routing. The WGSW-48040HP has 48 IEEE 802.3at PoE+
ports and PoE budget up to 600 watts for catering to medium to large scale of VoIP or
IP Surveillance networks at a lower total cost.
4 x 100/1000 TP/SFP
Combo Port
End-Span PSE
• Complies with IEEE 802.3af Power over Ethernet End-Span
PSE
• Up to 48 ports of IEEE 802.3af / 802.3at devices powered
• Supports PoE power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE Management
–– Total PoE power budget control
48 x Gigabit 802.3at PoE Port
Reset Button
–– Per port PoE function enable/disable
–– PoE Port Power feeding priority
–– Per PoE port power limit
–– PD classification detection
–– PD alive-check
–– PoE schedule
–– PD power recycling schedule
Console Port
110~240V AC
Input Connector
Cost-effective PoE Switch
The WGSW-48040HP can work with PLANET’s POE-E201 extender for reaching up
to 200M, 300M or longer distance. Meanwhile, with its 96Gbps high performance
switch architecture and 600-watt PoE power budget, the WGSW-48040HP can
power up 36 or more PoE IP cameras, through which the recorded video files
could be managed by 8/16/32-channel NVR systems or surveillance software for
performing comprehensive security monitoring. In the past, customers might need to
purchase two or more switches to build the VoIP or IP surveillance network. From
now on, customers only need one WGSW-48040HP to achieve the goal; this would
be cost-effective, save time and human resource.
Solution for IPv6 Networking
Faced with the increasingly large number of IP cameras and Wireless APs installed
and deployed in all kinds of applications, more and more network facilities start to
support the IPv6 protocol for the next-generation networking. By supporting both
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support
–– Broadcast / Multicast / Unknown-Unicast
• Supports VLAN
–– IEEE 802.1Q Tagged VLAN
–– Up to 255 VLANs groups, out of 4094 VLAN IDs
–– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–– Private VLAN Edge (PVE)
–– Protocol-based VLAN
the IPv4 and IPv6 and plenty of management functions with easy and friendly
Data
Sheet
management
interfaces, the WGSW-48040HP is the best choice for IP surveillance
and wireless service providers to connect with the IPv6 network.
1
1
WGSW-48040HP
Centralized Power Management for Gigabit Ethernet PoE Networking
To fulfill the needs of higher power required PoE network applications with Gigabit
speed transmission, the WGSW-48040HP features high-performance Gigabit IEEE
802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all
ports. It perfectly meets the power requirement of PoE VoIP phone and all kinds
of PoE IP camera such as IR, PTZ, speed dome cameras or even box type IP
cameras with built-in fan and heater for high power consumption.
–– MAC-based VLAN
–– Voice VLAN
–– IP Subnet VLAN
• Supports Spanning Tree Protocol
–– STP, IEEE 802.1D Spanning Tree Protocol
The WGSW-48040HP’s PoE capabilities also help to reduce deployment costs for
–– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
network devices as a result of freeing from restrictions of power outlet locations.
–– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol,
Power and data switching are integrated into one unit, delivered over a single cable
and managed centrally. It thus eliminates cost for additional AC wiring and reduces
installation time.
spanning tree by VLAN
–– BPDU Guard
• Supports Link Aggregation
Built-in Unique PoE Functions for Surveillance Management
As a Managed PoE Switch for surveillance network, the WGSW-48040HP features
intelligent PoE Management functions:
–– 802.3ad Link Aggregation Control Protocol (LACP)
–– Cisco ether-channel (Static Trunk)
–– Maximum 24 trunk groups, up to 8 ports per trunk group
–– Up to 16Gbps bandwidth (full duplex mode)
■ PD Alive Check
■ Scheduled Power Recycling
• Provides Port Mirror (many-to-1)
■ SMTP/SNMP Trap Event Alert
• Port Mirroring to monitor the incoming or outgoing traffic on
■ PoE Schedule
a particular port
• Loop protection to avoid broadcast loops
Intelligent Powered Device Alive Check
The WGSW-48040HP can be configured to monitor connected PD (Powered Device)
status in real-time via ping action. Once the PD stops working and it is without
response, the WGSW-48040HP will resume the PoE port power and bring the PD
back to work. It will greatly enhance the network reliability through the PoE port
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route
summarization
resetting the PD’s power source and reduce administrator management burden.
Step 1
PD Status
Good!!
Step 2
No Response......
PT PoE Camera
Ping Request
Ping Echo
check alive status for 3 times
Step 4
Step 3
PoE
ON
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
Ping Request
Alarm Notification
Quality of Service
PD Alive!!
OFF
PoE
ON
ON
Restart PoE device if without response
• Traffic classification
–– IEEE 802.1p CoS
–– TOS / DSCP / IP Precedence of IPv4/IPv6 packets
–– IP TCP/UDP port number
–– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Scheduled Power Recycling
• Traffic-policing policies on the switch port
The WGSW-48040HP allows each of the connected PoE IP cameras to reboot in
• DSCP remarking
a specific time each week. Therefore, it will reduce the chance of IP camera crash
resulting from buffer overflow.
Multicast
S M T W T F S
Automatically Reboot
Every Friday 23:00
CPU/Buffer
Load 85%
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
PoE
ON OFF ON
CPU/Buffer
Load 10%
• Multicast VLAN Registration (MVR)
PoE PT Camera
■ SMTP/SNMP Trap Event Alert
Though most NVR or camera management software offers SMTP email alert function,
the WGSW-48040HP further provides event alert function to help to diagnose the
abnormal device owing to whether or not there is a break of the network connection,
loss of PoE power or the rebooting response by PD Alive Check process.
2
WGSW-48040HP
■ PoE Schedule for Energy Saving
Besides being used for IP Surveillance, the WGSW-48040HP is certainly applicable
to construct any PoE network including VoIP and wireless LAN. Under the trend of
energy saving worldwide and contributing to the environmental protection on the Earth,
the WGSW-48040HP can effectively control the power supply besides its capability of
giving high watts power. The “PoE schedule” function helps you to enable or disable
PoE power feeding for each PoE port during specified time intervals and it is a powerful
function to help SMB or Enterprise save power and money.
Security
• IEEE 802.1x Port-based / MAC-based network access
authentication
• Built-in RADIUS client to co-operate with the RADIUS
servers
• TACACS+ login users access authentication
• RADIUS / TACACS+ users access authentication
• IP-based Access Control List (ACL)
8AM
5PM
5PM
8AM
• MAC-based Access Control List
• Source MAC / IP address binding
• DHCP Snooping to filter untrusted DHCP messages
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
Power
On
Power
On
Power
On
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Total consumption of 36watts / hr
Power
Off
Power
Off
Power
Off
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Saves 24watts / hr during off-business hours
Total Saved = 10800watts / month
PoE
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized
intruder
1000Base-T UTP with PoE
Robust Layer 2 Features
The WGSW-48040HP can be programmed for advanced switch management functions
Management
• Switch Management Interfaces
such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning
–– Console / Telnet Command Line Interface
Tree protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD
–– Web switch management
Snooping. The WGSW-48040HP also provides 802.1Q Tagged VLAN, and the VLAN
–– SNMP v1, v2c, and v3 switch management
groups allowed will be maximally up to 255. Via the aggregation of supporting ports,
–– SSH / SSL secure access
the WGSW-48040HP allows the operation of a high-speed trunk combining multiple
• Four RMON groups (history, statistics, alarms, and events)
ports and supports fail-over as well.
• IPv6 IP Address / NTP / DNS management
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the WGSW-48040HP switch not
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
only provides ultra high transmission performance and excellent layer 2 technologies,
• Firmware upload / download via HTTP / TFTP
but also offers IPv4/IPv6 VLAN routing feature which allows to cross over different
• DHCP Relay
VLANs and different IP addresses for the purpose of having a highly secured, flexible
• DHCP Option82
management and simpler networking application.
Enhanced Security
The WGSW-48040HP offers a comprehensive Layer 2 to Layer 4 Access Control List
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP)
(ACL) for enforcing security to the edge. It can be used to restrict network access
• SFP-DDM (Digital Diagnostic Monitor)
by denying packets based on source and destination IP address, TCP/UDP ports
• Cable Diagnostic technology provides the mechanism to
or defined typical network applications. Its protection mechanism also comprises of
802.1x Port-based and MAC-based user and device authentication. With the private
VLAN function, communication between edge ports can be prevented to ensure user
privacy. Furthermore, the WGSW-48040HP provides DHCP Snooping, IP Source
Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and
detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deploy management
• ICMPv6
discard ARP packets with invalid MAC address. The network administrators can now
construct highly secured corporate networks with considerably less time and effort than
before.
3
WGSW-48040HP
Efficient and Secure Management
The WGSW-48040HP Managed Switch is equipped with console, WEB and SNMP management interfaces. With the built-in Web-based management
interface, the WGSW-48040HP offers an easy-to-use, platform-independent management and configuration facility. The WGSW-48040HP supports
standard Simple Network Management Protocol (SNMP) and can be managed via any management software that supports SNMP protocol. For text-based
management, the WGSW-48040HP can be accessed via Telnet and the console port. Moreover, the WGSW-48040HP offers secure remote management by
supporting SSH, SSL and SNMPv3 connection which encrypt the packet content at each session.
Flexible and Extendable Uplink Solution
The WGSW-48040HP provides 4 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000Base-T RJ-45 copper to connect with surveillance network
devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these dual-speed fiber SFP slots, it can also
connect with the 100Base-FX / 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to backbone switch and monitoring center in long
distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode
fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Application
High Density of IP Surveillance Network
Providing up to 48 PoE+, in-line power interfaces and 4 Gigabit TP/SFP combo interfaces, the WGSW-48040HP can easily build a power centrally controlled
IP camera system for the enterprises. It can work with 8/16/32-channel NVR and surveillance software to perform comprehensive security monitoring. For
instance, one WGSW-48040HP can combine with one 32-channel NVR and one 8-channel NVRs; that is, each of its PoE ports can link to a specific PoE
IP camera for the administrators centrally and efficiently manage the surveillance system in one site. The 4 Gigabit TP/SFP combo interfaces in the WGSW48040HP also provide flexible Gigabit TP or fiber connection for uplink to public server groups.
Up to 48 PoE IP Cameras
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
1000
Uplink
WGSW-48040HP
1000
1000Base-SX/LX Fiber-optic
1000Base-T UTP
PoE
1000Base-T UTP with PoE
NVR
Monitoring Center
4
WGSW-48040HP
Layer 2+ VLAN Static Routing and PoE Application
The WGSW-48040HP 48-port Gigabit IEEE 802.3at High Power PoE Web Management switch features both IEEE 802.3af and High Power IEEE 802.3at
Power over Ethernet (PoE) that combines up to 30-watt power output per port, and PoE budget is up to 600 watts which can deploy up to 48 PoE devices.
With the built-in robust IPv4 / IPv6 Layer 3 traffic routing protocols, the WGSW-48040HP ensures reliable routing between VLANs and network segments.
The routing protocols can be applied by VLAN interface with up to 128 routing entries. The WGSW-48040HP is certainly a cost-effective and ideal solution
for enterprises
VLAN Routing + PoE Applications
PoE
PoE
VoI
PP
hon
e
AN (PoE)
100
Do
ma
VL
in B
IP S
192
.16
8.1
urv
eilla
n
AN ce (Po
300
E
Do )
ma
in A
VL
0.x
/24
192
.16
8.3
0.x
WGSW-48040HP
/24
Layer 3 IP Static Routing
PoE
Co
ntro
VL
l Ce
AN
NV
R
IP P Serv
BX er
Ser
ver
nte
1D
r
om
ain
192
.16
Wir
eles
s
VL AP (P
AN
200 oE)
Do
ma
in
8.0
.x
1000Base-T UTP
PoE
1000Base-T UTP with PoE
C1
92.
168
.20
.x/2
4
5
WGSW-48040HP
Specifications
WGSW-48040HP
Product
Hardware Specifications
Copper Ports
48 10/100/1000Base-T RJ-45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 100/1000Base-X SFP interfaces, shared with Port-45 to Port-48
Compatible with 100Base-FX SFP transceiver
Console
1 x RJ-45 to RS-232 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
96Gbps / non-blocking
Throughput
71.4 Mpps@64Bytes
Address Table
16K entries, automatic source address learning and ageing
Share Data Buffer
16M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10056bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H)
440 x 440 x 44.2 mm, 1U height
LED
System:
Power (Green), SYS (System, Green)
Alert:
Fan Alarm 1 (Red), Fan Alarm 2 (Red)
PoE Ethernet Interfaces (Port 1 to Port 48):
LNK/ACT (10/100/1000Mbps, Green), PoE-in-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 45 to Port 48):
LNK/ACT (100/1000X, Green)
Power Requirements
100-240V AC, 50/60Hz, 12A
Power Consumption
722 watts / 2462 BTU
ESD Protection
2KV DC
Power over Ethernet
PoE Standard
IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type
End-Span
PoE Power Output
Per Port 52V DC, 590mA
Max. 30.8 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
PoE Ability
600 watts (max.) @ 25 degrees C
PD @ 11 watts
48 units
PD @ 15.4 watts
38 units
PD @ 30.8 watts
19 units
Layer 2 Functions
Port Configuration
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port Mirroring
TX / RX / Both
Many-to-1 monitor
VLAN
802.1Q Tagged-based VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN Registration)
GVRP
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
24 groups of 8-Port trunk support
Spanning Tree Protocol
STP / RSTP / MSTP
6
WGSW-48040HP
QoS
Traffic classification based, Strict priority and WRR
8-level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP Snooping
IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping
MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List
IP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces
Max. 128 VLAN interfaces
Routing Table
Max. 32 routing entries
Routing Protocols
IPv4 Static Routing
IPv6 Static Routing
Management Functions
Basic Management Interfaces
Console, Telnet, Web Browser, SNMP v1, v2c
Secure Management Interfaces
SSH, SSL, SNMP v3
SNMP MIBs
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
PoE-Ethernet MIB
Standards Conformance
Regulation Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
7
WGSW-48040HP
Ordering Information
WGSW-48040HP
L2+ 48-Port 10/100/1000T 802.3at PoE +
4-Port Shared 100/1000X SFP Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing
Related PoE Products
ICA-1200
Full HD PoE Cube IP Camera
ICA-2200
Full HD PoE Box IP Camera
ICA-2250VT
Industrial PoE Plus Outdoor IR IP Camera
ICA-2500
5 Mega-pixel PoE Box IP Camera
ICA-3250V
Full HD Outdoor IR PoE IP Camera
ICA-3350V
3 Mega-pixel Vari-focal Bullet IR IP Camera
ICA-4200V
Full HD 20M IR Vari-focal Dome IP Camera
ICA-4500V
5 Mega-pixel 20M IR Vari-focal Dome IP Camera
ICA-5250
Full HD Ultra-mini Vandal Dome
ICA-5350V
3 Mega-pixel Vandalproof IR IP Camera
ICA-HM101
2 Mega-pixel PoE Cube IP Camera
ICA-HM127
3 Mega-pixel H.264 Box IP Camera
ICA-HM131
H.264 Full-HD Fixed Dome IP Camera
ICA-HM132
H.264 2 Mega-pixel 20M IR Vari-focal Dome IP Camera
ICA-HM136
H.264 2 Mega-pixel 20M IR Vandalproof Dome IP Camera
ICA-HM312
2 Mega-pixel 25M IR Outdoor Bullet PoE IP Camera
ICA-HM316
2 Mega-pixel Outdoor IR PoE IP Camera
ICA-HM351
2 Mega-pixel 35M IR Outdoor Box PoE IP Camera
ICA-HM620
2 Mega-pixel PoE Plus Speed Dome Internet Camera
POE-152S
IEEE 802.3af Power over Ethernet Splitter
POE-162S
IEEE 802.3at Gigabit High Power over Ethernet Splitter
POE-E101
IEEE 802.3af Power over Ethernet Extender
POE-E201
IEEE 802.3at Power over Ethernet Extender
WNAP-C3220
802.11n Wireless Ceiling Mount PoE Access Point
WNAP-1120PE
802.11n Wireless Access Point with PoE
WNAP-W2200
802.11n 300Mbps In-Wall Access Point w/ USB Charger (EU Type)
WDAP-C7400
900Mbps Dual Band Ceiling-mount Wireless Access Point
ICF-1700
Touch Screen Internet Multimedia Phone
VIP-256PT
802.3af PoE SIP IP Phone
VIP-2020PT
Enterprise HD PoE IP Phone (2-Line)
VIP-5060PT
Professional HD PoE IP Phone (6-Line)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
WGSW-48040HP
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2014 PLANET Technology Corp. All rights reserved.
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising