5b2856383b6601a7d8ae26b65cb38d04

5b2856383b6601a7d8ae26b65cb38d04
Data Sheet
Cisco Aironet 1300 Series Outdoor Access Point or Bridge
PRODUCT OVERVIEW
The Cisco® Aironet® 1300 Series Outdoor Access Point or Bridge (Figure 1) is an 802.11g access point and bridge that provides highspeed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients. Building a metropolitan-area wireless
infrastructure with the Cisco Aironet 1300 Series provides deployment personnel with a flexible, easy-to-use solution that meets the
security requirements of wide-area networking professionals. The Cisco Aironet 1300 Series can be deployed as an autonomous access
point or bridge, providing intelligent network services as a standalone device. Alternatively, the Cisco Aironet 1300 Series can be deployed
as part of the Cisco Unified Wireless Network, managed centrally by a Cisco wireless LAN controller.
Figure 1.
Cisco Aironet 1300 Series
The Cisco Aironet 1300 Series supports the 802.11g standard—providing 54-Mbps data rates with a proven, secure technology while
maintaining full backward compatibility with legacy 802.11b devices. It is delivered in a compact, rugged enclosure for deployment in
outdoor environments, and is available in two versions. The Cisco Aironet 1300 Series with integrated antenna can be quickly installed to
provide a LAN bridge to a remote site or multiple sites. The 1300 Series with antenna connectors supports a variety of Cisco 2.4-GHz
antennas, providing range and coverage versatility.
The Cisco Aironet 1300 Series is available either as part of the Cisco Unified Wireless Network or as an autonomous access point or
bridge. The Cisco Unified Wireless Network is a comprehensive solution that delivers an integrated, end-to-end wired and wireless
network. Using the radio and network management features of the Cisco Unified Wireless Network for simplified deployment, the Cisco
Aironet 1300 Series extends the security, scalability, reliability, ease of deployment, and manageability available in wired networks to the
wireless LAN. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco
wireless LAN controllers and the Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1300 Series can
automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information
with no hands-on intervention.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 15
Autonomous access points are based on Cisco IOS® Software and may optionally operate with the CiscoWorks Wireless LAN Solution
Engine (WLSE). Autonomous access points, along with the WLSE, deliver a core set of features and may be field-upgraded to take
advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve. As an autonomous access point or bridge, the
Cisco Aironet 1300 Series may be configured to operate as a wireless access point, bridge, or a workgroup bridge.
USERS AND APPLICATIONS
The Cisco Aironet 1300 Series can provide outdoor wireless access, an ongoing savings of leased-line expenses, a method to connect
networks despite physical barriers such as lakes or highways, and rapid deployment of network connections—often while waiting on other
facilities, such as fiber-optic installations. The types of organizations that will benefit from the advantages of the Cisco Aironet 1300 Series
include education, enterprise, government, healthcare, military, public safety, transportation, and WLAN service providers. These
organizations have a variety of possible applications, as shown in Figure 2 and described in the following paragraphs.
Campus Networks
Whether the deployment is in a typical college campus or corporate offices with multiple buildings, IT professionals are faced with
interconnecting local area networks around and in between each of the buildings. These LANs require cost-effective, high-bandwidth
connections with seamless mobility throughout the WLAN. They also require the flexibility and control that is unavailable through leased
lines or that would otherwise require trenching for new cable installations. The Cisco Aironet 1300 Series can be used as an outdoor access
point, either operating with the Cisco wireless LAN controller and WCS or autonomously as an intelligent access point. It can also be used
as an autonomous wireless bridge to connect remote buildings to the LAN.
Nomadic Networks and Users
More and more, networks are “on the move.” Vehicles such as buses, trains, ambulances, and patrol cars are being equipped with their own
LAN-supported devices, including notebooks, personal digital assistants (PDAs), cameras, and scanners. These mobile networks provide
new passenger services, improved public service, and operational efficiency but they need to be interconnected to enable informationsharing and more informed decision-making. The Cisco Aironet 1300 Series can operate in autonomous mode as a workgroup bridge
connecting in-vehicle devices to Cisco Aironet access points and bridges that are fixed throughout the service area.
Outdoor Public Access
The proliferation of WLAN hotspots has allowed users to stay connected while in hotels, airports, and even coffee shops. As more users
desire ubiquitous connectivity, outdoor hotspots are being added—and some include multiple city blocks or even town centers. These
outdoor hotspots can be cost-effectively deployed with the Cisco Aironet 1300 Series unified or autonomous access points.
Temporary Networks
The variety of temporary solutions is limitless, with applications such as remote military campaigns, short-term office leases, temporary
buildings such as trailers, or even parking lot tent sales. These deployments require a temporary network infrastructure that is rugged,
portable, easy to install, and flexible. The Cisco Aironet 1300 Series can be quickly deployed, with complete functionality packaged in the
integrated antenna version, or with a selection of easy-to-install remote antennas for the connectorized version.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 15
Figure 2.
Cisco Aironet 1300 Series Applications Example
BENEFITS
Industry-Leading Performance
Data rates of 54 Mbps in the 2.4-GHz band
Bridge range of 20 miles (32 kilometers [km]) at 11 Mbps
Aggregate throughput approaching 28 Mbps
Maximum transmit power of 100 milliwatts (mW) for 802.11b and 30 mW for 802.11g
For vehicle-installed deployments, over 100 km per hour speeds at 12 and 24 Mbps with 128-byte packets at 1 percent packet error
rate (PER) (workgroup bridge mode connected to a Cisco Aironet access point or bridge)
Support for antenna diversity
Low Total Cost of Ownership
Compelling return on investment (ROI) compared to cable installation or ongoing leased-line fees
Low bridging-system cost
Low outdoor access-point system cost
Ability to reuse existing Cisco Aironet Series 350 Wireless Bridges for low upgrade costs
Investment protection with future Cisco IOS Software upgrades
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 15
Flexible and Easy to Install
The Cisco Unified Wireless Network simplifies wireless LAN deployment and management by providing clear visibility and
dynamic control of the RF environment.
Convenient LEDs provide bridge alignment feedback and diagnostics.
Quick-hang mounting bracket allows for an easy installation process; roof and wall mounting kits offer more mounting options.
Rapid deployment, redeployment, and recommissioning can be achieved with no reliance upon third-party service providers or a
lengthy license or trenching process.
Multiple, configurable radio network roles enable point-to-point and point-to-multipoint bridging.
Wide DC power-input range allows a variety of power supply options such as solar power or vehicle power (+10 to +48 volts direct
current [VDC]).
Supports a wide operating-temperature range of –22°F to 131°F (–30° to +55°C).
Meets NEMA 4 and IP56 specifications for harsh environments.
Supports captured antennas for easy mounting and support for external antennas, including existing Cisco Aironet
2.4-GHz antennas.
AWARD-WINNING SECURITY
The Cisco Aironet 1300 Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2 level 2 validation and is in
process for Common Criteria validation under the National Information Assurance Partnership (NIAP) program.
The Cisco Aironet 1300 Series supports 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, and numerous Extensible Authentication
Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN security. These
certifications support IEEE 802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and
Advanced Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified
WLAN devices from different manufacturers.
The Cisco Aironet 1300 Series hardware-accelerated AES encryption supports enterprise-class, government-grade secure encryption over
the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the
network. Backward compatibility and support for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by
the Cisco Aironet 1300 Series.
Cisco Aironet 1300 Series access points operating with LWAPP support Cisco Unified Intrusion Detection System or Intrusion Prevention
System (IDS/IPS), which is part of the Cisco Self-Defending Network and is the industry’s first integrated wired and wireless network
security solution. The Cisco Unified IDS/IPS takes a comprehensive approach to security—at the wireless edge, wired edge, WAN edge,
and through the data center. When a trusted client acts maliciously, the Cisco wired IDS detects the attack and sends shun requests to the
Cisco wireless LAN controllers, which will then disassociate the client device. Cisco Unified IDS goes beyond simple fire walling. If a user
is allowed to access a specific server, but is not allowed to access a particular directory on the server, the anomalous behavior is detected
and mitigated.
Autonomous or unified Cisco Aironet 1300 Series Access Points support management frame protection for the authentication of 802.11
management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or
malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by
the access point and reports will be gathered on the controller, Cisco WCS, or CiscoWorks WLSE.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 15
PRODUCT ARCHITECTURE
A flexible outdoor wireless-bridge or access-point solution is provided through the combination of the Cisco Aironet 1300 Series, a power
injector, and options for both antennas and mounting. Figure 3 shows how the units connect.
Figure 3.
Network Diagram with Power Injector
Cisco Aironet 1300 Series
The Cisco Aironet 1300 Series provides the 802.11g interface for access-point capability or bridge connections. By placing the unit
outdoors, close to the antenna, you can minimize the wireless cable losses—thereby maximizing the range of the network. The unit is
available with either an integrated antenna, or with connectors for external antennas (Figure 4). The high-gain, integrated antenna is
designed for easy installations of point-to-point links or non-root nodes of point-to-multipoint networks as an autonomous bridge. The
nonintegrated antenna version provides professional installers with an RP-TNC connector that allows the deployment of omnidirectional,
sector, or high-gain dish antennas for specific application requirements.
Figure 4.
Cisco Aironet 1300 Series Connector Options
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 15
Power Injector
The Cisco Aironet Bridge Power Injector converts the standard 10/100BASE-T Ethernet interface that is suitable for weather-protected
areas to a dual F-Type connector interface for coaxial cables that are more suitable for harsh outdoor environments. The power injector also
provides power to the outdoor unit over the same cables with a power-discover feature and surge protection. To support longer cabling
from your wired switch or router, the power injector enables total cable runs up to 200 meters (Category 5 [Cat5] and coaxial). The Cisco
Aironet 1300 Series ships with the Cisco Aironet Power Injector LR2 (Figure 5) and an AC power supply.
Figure 5.
Cisco Aironet Power Injector AIR-PWRINJ-BLR2/AIRPWRINJ-BLR2T
The optional Cisco Aironet Power Injector LR2T takes power from any +12 to +40 VDC source not supplied by Cisco. Typically, the DC
source is a vehicle or solar-power source (Figure 6). This power injector provides the flexibility needed when an AC power source is not
available.
Figure 6.
Network Diagram with Optional Power Injector
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 15
Mounting Hardware and Antennas
In addition to having a variety of antennas available from Cisco, the Cisco 1300 Series also has different mounting options (Figure 7).
These optional mounting kits are available for mounting to a roof, wall, or pole. The quick-hang mounting bracket enables a simple,
one-person installation. For more information on available antennas, please refer to the Cisco Aironet Antennas and Accessories Data
Sheet and Reference Guide:
Data Sheet: http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022b11b.html
Reference Guide: http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
Figure 7.
Cisco Aironet 1300 Series Mounting Hardware and Antennas
FEATURES
The Cisco Aironet 1300 Series access point or bridge provides the following features.
Antenna Alignment Assistance
The autonomous Cisco Aironet 1300 Series provides an autoconfiguration and installation mode for quick deployment of point-to-point
links without the need for configuration through Telnet, FTP, or Simple Network Management Protocol (SNMP). This mode provides
LEDs with signal-strength information used in the installation and alignment process. As a result, installers are free to perform their
installation process and verify the link quality without knowledge of Cisco IOS Software or data networking.
Automatic RF Configuration
Under the Cisco Unified Wireless Network, radio resource management provides automatic configuration of RF parameters for access
points such as the Cisco Aironet 1300 Series Access Points. The result is a coordinated RF plan for access points under the span of the
Cisco wireless LAN controller, which also recognizes the presence of other RF emitting devices. This minimizes interference to and from
neighboring access points, ensuring optimal network capacity.
Seamless Layer 2 and Layer 3 Roaming
The Cisco Aironet 1300 Series provides fast secure roaming of wireless clients and autonomous non-root bridges and workgroup bridges.
In both the unified access point and the autonomous access point, the encryption keys for mobile devices are cached locally, allowing the
mobile device to roam between access points while remaining authenticated to the network. This significantly reduces roaming time by
eliminating the need to conduct the four-way handshake with each roam. Autonomous non-root bridges and workgroup bridges also scan in
the background to search for alternative Cisco Aironet access points and bridges that mobile device may be roaming to, which also reduces
roaming time.
Support for Port Aggregation Protocol and Cisco Fast EtherChannel Technology
Bandwidth can be increased between bridged networks through the aggregation of multiple autonomous bridges at each site via Cisco Fast
EtherChannel® technology, Port Aggregation Protocol (PAgP), or routing protocols.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 15
Wireless Link-Distance Adjustment
For an autonomous Cisco Aironet 1300 Series device, the link-distance parameter allows the user to tune the Carrier-Sense Multiple
Access/Collision Avoidance (CSMA/CA) parameters for the particular range in use to maximize performance.
Wireless Packet Concatenation
The concatenation of smaller packets into larger ones allows autonomous Cisco Aironet 1300 Series access point or bridge to more
efficiently use the wireless medium and provide higher overall data throughputs.
Wireless Programmable Clear-Channel Assessment
With a programmable clear-channel assessment, an autonomous Cisco Aironet 1300 Series access point or bridge can be configured to the
particular background-interference level found in your environment. This provides reduced contention overhead with other wireless
systems.
SUMMARY
The Cisco Aironet 1300 Series is a flexible outdoor 802.11b and 802.11g access point or bridge that provides high-speed and cost-effective
wireless connectivity between multiple fixed or mobile networks and clients.
PRODUCT SPECIFICATIONS
Link Roles and Product Compatibility
Table 1 outlines the link roles in which the Cisco Aironet 1300 Series can operate, and identifies the products that it is compatible with in
the particular role.
Table 1.
Link Role and Product Compatibility
Role
Applications
Unified or Autonomous
Architecture
Compatibility
Access Point
Engineered specifically for harsh outdoor environments, yet also
capable in indoor deployments, the Cisco Aironet 1300 Series is
ideal for WLANs requiring outdoor coverage. The Cisco Aironet
1300 Series is Wi-Fi certified as an access point and also
supports the innovative features available with Cisco Aironet and
Cisco Compatible client devices.
Unified or Autonomous
Bridge
The Cisco Aironet 1300 Series supports either point-to-point or
point-to-multipoint configurations to cost-effectively interconnect
remote, temporary, or mobile networks. It can serve as an
upgrade or replacement to the Cisco Aironet 350 Wireless
Bridge by providing over-the-air compatibility with existing Cisco
Aironet 350 Series Wireless Bridges. While in bridge mode,
client associations are also accepted—effectively providing
simultaneous bridge and access-point capability.
Autonomous
Compatible with Cisco Aironet
1300 Series and 350 Series
Wireless Bridges
Workgroup
Bridge
As a workgroup bridge, the Cisco Aironet 1300 Series quickly
connects any Ethernet-enabled device, such as a laptop or other
portable computer, to a WLAN. By adding a standard Ethernet
hub or switch, you can connect up to 255 of these devices to any
Cisco Aironet access point or wireless bridge.
Autonomous
Supports operation with
Cisco Aironet access points
and Cisco bridges
Compatible with any Wi-Fi
certified WPA or WPA2 client
device for basic capability
Compatible with Cisco Aironet
clients and Cisco Compatible
clients for extended capability
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 15
Protocols
Table 2 lists the protocols supported by the Cisco Aironet 1300 Series.
Table 2.
Protocols
Protocols
Description
Air Interface Standard
IEEE 802.11b or IEEE 802.11g
Note: Autonomous bridge mode has enhancements to the standard to allow longer-range bridging communications.
Frequency Band
2.412 to 2.462 GHz (FCC)
2.412 to 2.472 GHz (ETSI)
2.412 to 2.472 GHz (TELEC)
Wireless Modulation
802.11b
Direct Sequence Spread Spectrum (DSSS):
Differential Binary Phase Shift Keying (DBPSK) at 1 Mbps
Differential Quadrature Phase Shift Keying (DQPSK) at 2 Mbps
Complementary Code Keying (CCK) at 5.5 and 11 Mbps
802.11g
Orthogonal Frequency Divisional Multiplexing (OFDM):
BPSK at 6 and 9 Mbps
QPSK at 12 and 18 Mbps
16-quadrature amplitude modulation (QAM) at 24 and 36 Mbps
64-QAM at 48 and 54 Mbps
Media Access Protocol
Carrier-Sense Multiple Access with Collision Avoidance (CSMA/CA)
Lightweight Access
Point Protocol
A network protocol for lightweight access points that also provides for centralized management.
Operating Channels
802.11b/g
ETSI: 13
Americas: 11
TELEC (Japan): 13
Nonoverlapping
Channels
3
Security—Bridge Role*
Cisco Wireless Security Suite, including:
Authentication
802.1X support including LEAP to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption
Cisco TKIP or WPA TKIP; key hashing (per-packet keying), Message Integrity Check (MIC) and broadcast key rotation
AES (802.11i)
Security—Access Point
Role
Cisco Wireless Security Suite supporting WPA and WPA2, including:
Authentication
Management frame protection provides for the authentication of 802.11 management frames by the wireless network
infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating
infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access
points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
802.1X support including Cisco LEAP, Protected EAP-Generic Token Card (PEAP-GTC), PEAP-Microsoft Challenge
Authentication Protocol Version 2 (MSCHAPv2), EAP Message Digest 5 (EAP MD5), EAP-Transport Layer Security (EAPTLS), EAP-Tunneled TLS (EAP-TTLS), EAP-Subscriber Identity Module (EAP-SIM), and EAP-Flexible Authentication via
Secure Tunneling (EAP-FAST) to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption
WPA: Cisco TKIP or WPA TKIP; key hashing (per-packet keying), MIC and broadcast key rotation
WPA2: AES (802.11i)
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 15
Protocols
Description
Security—Workgroup
Bridge Role*
Cisco Wireless Security Suite, including:
Authentication
802.1X support including Cisco LEAP to yield mutual authentication and dynamic per-user, per-session encryption keys
Encryption
Cisco TKIP or WPA TKIP; key hashing (per-packet keying), MIC and broadcast key rotation
AES (802.11i)
SNMP Compliance
Versions 1 and 2
* Cisco Aironet 1300 Series can operate as a workgroup bridge or wireless bridge when it is an autonomous device. When the Cisco Aironet 1300 Series
is operating under the Cisco Unified Wireless Network architecture, it only operates as an access point.
Components
Table 3 lists the components available for the Cisco Aironet 1300 Series.
Table 3.
Components
Components
Description
Power Injector LR2
The power injector converts the standard 10/100BASE-T Ethernet Cat5 RJ-45 interface that is suitable for weather-protected
areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments.
While providing a 100BASE-T interface to the Cisco Aironet 1300 Series, the power injector also provides power to the unit
over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be
connected. As an added benefit to the installer, the automatic medium-dependent interface crossover (Auto-MDIX) feature is
built in, allowing the dual cables to be swapped while maintaining the same capability. To support longer cable runs from your
network switch or router, the power injector is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters
of indoor Cat5 cable—enabling total cable runs up to 200 meters. Lightning and surge protection is also included at the F-Type
connector interface to provide added protection to your network devices. The power injector requires a 48V DC source
supplied by Cisco.
Power Injector LR2T
The Power Injector LR2T supports all the capabilities of LR2. It is designed for use in transportation applications and operates
with an input voltage range of +12 to +40V DC. The DC source is provided by the user. The LR2T can therefore be vehicle- or
solar-powered.
Power Supply
48V DC supply for AIR-PWRINJ-BLR2=
User-supplied 12 to 40V DC source for AIR-PWRINJ_BLR2T=. Could require an external load-dump-module for
automotive and bus installations.
Vertical polarization
AIR-BR1310G- x-K9 or
AIR-LAP1310G-x-K9
Integrated Antenna
13-dBi gain
36° E-plane by 38° H-plane (3-dB beam width)
Interfaces
Table 4 lists the Cisco Aironet 1300 Series interfaces.
Table 4.
Interfaces
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Status LEDs
Four LEDs: Install, Radio, Status, and Ethernet
One bicolor LED showing power status
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power,
and full-duplex console port (RS-232 connection)
Dual coaxial cable carries full-duplex Ethernet, DC power, and
full-duplex console port (RS-232 connection)
Antenna Interface
AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9:
Air interface (integrated directional antenna)
—
AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R:
Two RP-TNC type connectors for external antennas
DC Power
—
One two-pin Switchcraft connector (with threaded locking sleeve)
and matching connector
RJ-45 Interface
—
One RJ-45 connector for console-port access (9600 bps only), a
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 15
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
second RJ-45 connector for 10/100BASE-T LAN interface
Grounding Lugs
Two grounding lugs for lightening protection.
—
Memory Requirements
Table 5 lists the memory specifications for the Cisco Aironet 1300 Series.
Table 5.
Memory Requirements
8 MB of Flash Memory
Memory space for future firmware upgrades to support new 802.11 standards and advanced features.
Performance
Table 6 lists the Cisco Aironet 1300 Series performance capabilities.
Table 6.
Performance Capabilities
Available Transmit Power Settings
AIR-BR1310G-x-K9 or AIR- LAP1310G-x-K9
AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R
802.11b:
802.11b:
100 mW (20 dBm)
100 mW (20 dBm)
50 mW (17 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
20 mW (13 dBm)
10 mW (10 dBm)
10 mW (10 dBm)
5 mW (7 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
802.11g:
1 mW (0 dBm)
802.11g:
30 mW (15 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
20 mW (13 dBm)
10 mW (10 dBm)
10 mW (10 dBm)
5 mW (7 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
1 mW (0 dBm)
Note: Maximum power setting will vary according to individual country regulations.
Maximum Operational Receive Level
–20 dBm
–20 dBm
Maximum Survivable Receive Level
10 dBm
10 dBm
Receive Sensitivity
(10 Percent with 3200 Byte Packets)
Maximum Bridge Relative Velocity
(Autonomous-Mode Only)
1 Mbps: –94 dBm
1 Mbps: –94 dBm
2 Mbps: –91 dBm
2 Mbps: –91 dBm
5.5 Mbps: –89 dBm
5.5 Mbps: –89 dBm
11 Mbps: –85 dBm
11 Mbps: –85 dBm
6 Mbps: –90 dBm
6 Mbps: –90 dBm
9 Mbps: –89 dBm
9 Mbps: –89 dBm
12 Mbps: –86 dBm
12 Mbps: –86 dBm
18 Mbps: –84 dBm
18 Mbps: –84 dBm
24 Mbps: –81 dBm
24 Mbps: –81 dBm
36 Mbps: –77 dBm
36 Mbps: –77 dBm
48 Mbps: –73 dBm
48 Mbps: –73 dBm
54 Mbps: –72 dBm
54 Mbps: –72 dBm
Over 100 km per hour at 12 and 24 Mbps with 128-byte packets at 1 percent PER
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 11 of 15
Access Point Role: Outdoor Range
AIR-BR1310G-x-K9 or AIR- LAP1310G-x-K9
AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R
Americas
Americas
865 feet (260 meters) at 54 Mbps
3465 feet (1055 meters) at 11 Mbps
150 feet (45 meters) at 54 Mbps
775 feet (235 meters) at 11 Mbps
195 feet (60 meters) at 54 Mbps
630 feet (190 meters) at 11 Mbps
TELEC
TELEC
485 feet (145 meters) at 54 Mbps
1095 feet (330 meters) at 11 Mbps
195 feet (60 meters) at 54 Mbps
445 feet (135 meters) at 11 Mbps
Note: Access point with 13-dBi integrated
antenna and Cisco clients
Note: Access point with 5.2-dBi patch antenna and
Cisco clients
Americas
Americas
1.3 miles (2 km) at 54 Mbps
9 miles (15 km) at 11 Mbps
4.5 miles (7 km) at 54 Mbps
14 miles (23 km) at 11 Mbps
EMEA
EMEA
0.2 miles (0.36 km) at 54 Mbps
2.3 miles (3.5 km) at 11 Mbps
5.5 miles (9 km) at 11 Mbps
TELEC
4.5 miles (7 km) at 54 Mbps
TELEC
0.7 miles (1.1 km) at 54 Mbps
3.2 miles (5 km) at 11 Mbps
Note: 13-dBi integrated antenna at root and
non-root bridge
Bridge Role: Point-to-Multipoint Range*
1410 feet (430 meters) at 11 Mbps
ETSI
ETSI
Bridge Role: Point-to-Point Range*
350 feet (105 meters) at 54 Mbps
12 miles (20 km) at 11 Mbps
Note: 21-dBi dish antenna at root and
non-root bridge
Americas
Americas
1.1 miles (1.8 km) at 54 Mbps
8 miles (13 km) at 11 Mbps
2.0 miles (3.3 km) at 54 Mbps
10 miles (16 km) at 11 Mbps
EMEA
EMEA
0.25 miles (0.4 km) at 54 Mbps
1.1 miles (1.8 km) at 11 Mbps
2.5 miles (4 km) at 11 Mbps
TELEC
2.0 miles (3.3 km) at 54 Mbps
TELEC
0.8 miles (1.3 km) at 54 Mbps
3.6 miles (5.8 km) at 11 Mbps
Note: 14-dBi sector antenna at root and 13-dBi
integrated antenna at non-root
9.0 miles (14 km) at 11 Mbps
Note: 14-dBi sector at root and 21-dBi dish at
non-root
* Bridge role is only available for autonomous deployments. The distances referenced here are approximations and should be used for estimation
purposes only.
Physical Specifications
Table 7 lists the physical specifications of the Cisco Aironet 1300 Series.
Table 7.
Physical Specifications
AIR-BR1310G-x-K9 AIR-BR1310G-x-K9-R
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Dimensions
8 in. x 8.1 in. x 3.12 in. (20.3 cm x 20.57 cm
x 7.87 cm)
4.62 in. x 4.76 in. x 1.07 in. (11.73 cm
x 12.09 cm x 2.71 cm)
4.62 in. x 4.76 in. x 1.07 in. (11.73
cm x 12.09 cm x 2.71 cm)
Weight
2.5 lb (1.25 kg)
2 lb (1 kg)
2 lb (1 kg)
Operational
Temperature
–22º to +131ºF (–30º to +55ºC)
–22º to +131ºF (–30º to +55ºC)
–22º to +131ºF (–30º to +55ºC)
Storage Temperature
–40º to +185ºF (–40º to +85ºC)
–40º to +185ºF (-40º to +85ºC)
–40º to +185ºF (–40º to +85ºC)
Operational Altitude
13,800 ft (4206 m)
13,800 ft (4206 m)
13,800 ft (4206 m)
Storage Altitude
16,000 ft (4877 m)
16,000 ft (4877 m)
16,000 ft (4877 m)
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 12 of 15
AIR-BR1310G-x-K9 AIR-BR1310G-x-K9-R
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Humidity
0 to 100% at 100ºF (38ºC) (condensing)
0 to 90% at 100ºF (38ºC)
(noncondensing)
0 to 90% at 100ºF (38ºC)
(noncondensing)
Vibration
SAEJ1455 section 4.9
SAEJ1455 section 4.9
SAEJ1455 section 4.9
Enclosure
NEMA 4; IP56; UL2083; environmentally
sealed
UL2083; metal case
UL2083; metal case
Power Requirements
Table 8 lists Cisco Aironet 1300 Series power requirements.
Table 8.
Power Requirements
AIR-BR1310G-x-K9
AIR-BR1310G-x-K9-R
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
AC Power
Not required—uses DC voltage from
power injector
100 to 240V AC, +/-10% (power supply provided
by Cisco)
Not required
DC Power
—
+48V DC, +/–10%
+12 to +40V DC, +/–10%
Up to 9 W
Up to 11 W
Approvals and Compliance
The Cisco Aironet 1300 Series meets the following approvals and compliance standards (Table 9).
Table 9.
Approvals and Compliance
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Country Compliance
Customers are responsible for verifying approval for use in their country. Please visit
http://www.cisco.com/go/aironet/compliance to verify approval and to identify the regulatory domain that corresponds to a
particular country. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on
the Global Price List.
—
Wi-Fi Certification
Safety
UL 60950 third edition
UL 60950 third edition
CSA C22.2 No. 60950-00
CSA C22.2 No. 60950-00
IEC 60950 Sec Ed, amendments 1-4
IEC 60950 Sec Ed, amendments 1-4
EN 60950; 1992, amendments 1-4
EN 60950; 1992, amendments 1-4
CSA 94/UL50—NEMA rated
UL2043
FIPS 140-2 prevalidation list
Radio Approvals
FCC Part 15.247
—
RSS—139-1, RSS-210 (Canada)
EN 300.328 (Europe)
Telec 33B (Japan)
ARIB-STD-T66 v2.1
FCC Bulletin OET-65CRSS-102
Designed to EN60945
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 13 of 15
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
EMI and Susceptibility
(Class B)
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
FCC Part 15.107 and 15.109
Class B
EN 55022 Class B
ICES-003 Class B (Canada)
EN 55024
EN 55022 Class B
AS/NZS 3548 Class B
EN 55024
VCCI Class B
AS/NZS 3548 Class B
EN 301.489-1 and 17 (Europe)
VCCI Class B
Designed to CISPR 25, ISO 11452-24, EN50121, EN60571 and
SAEJ1113
EN 301.489-1 and 17 (Europe)
Additional Specifications
Warranty
One year
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. For assistance in determining the correct wireless bridge to order, as well as
appropriate accessories, please read the Cisco Aironet 1300 Series Ordering Guide.
TO DOWNLOAD THE SOFTWARE
Cisco Aironet software can be downloaded at the Cisco Software Center.
SERVICE AND SUPPORT
Cisco Systems offers a wide range of service programs to accelerate customer success. These innovative programs are delivered through a
unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to
protect your network investment, optimize network operations, and prepare the network for new applications to extend network
intelligence and the power of your business. For more information about Cisco Services, see Cisco Technical Support Services.
FOR MORE INFORMATION
For more information about the Cisco Aironet 1300 Series, visit http://www.cisco.com/go/aironet or contact your local account
representative.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 14 of 15
Printed in USA
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-340315-03
09/06
Page 15 of 15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising