Specification CM55 AC Clamp Meter

Specification CM55 AC Clamp Meter
Specification
CM55
AC Clamp Meter
Specification
CM55
AC Clamp Meter
ENVIRONMENTAL
Temperature & Humidity
(Operating): 0°C to 40°C <80% R.H., non-condensing
(Storage): -10°C to 60°C < 70% R.H., batteries removed
Altitude: up to 2000m
Pollution degree: 2
SAFETY
Conforms to: BS EN 61010-1, BS EN 61010-2-032, CAT III 600V
Class II, double insulation
ELECTRICAL
All specified accuracies are at 23°C ± 5°C, <80% RH for 1 year.
Temperature coefficient: add 0.1 x (specified accuracy) per °C. (0°C to 18°C,
28°C to 40°C).
All accuracies below are expressed as ± (percentage of reading + digits)
SPECIFICATION FOR TL16 TEST LEADS
Maximum voltage: 1000V AC/DC
Maximum current 10A continuous
Connector: 4mm banana plug with fixed shroud
DC Voltage
Range
Resolution
400V
0.1V
600V
1V
Input
impedance
Accuracy
1M:
1.0% + 3
Environmental
Temperature (Operating & Storage): 0°C to 40°C
Altitude: up to 2000m
Pollution degree: 2
Overload protection: 660V DC or AC rms
Safety
Conforms to BS EN 61010-031, CAT IV 600V, CAT III 1000V, 10A (probe tip
covers fitted)
AC Voltage
Range
Resolution
400V
0.1V
600V
EMC
Conforms to BS EN 61326-1
Input
impedance
Accuracy
(50 to 400Hz)
1M:
1.2% + 3
CAT II 1000V, 10A (probe tip covers
removed)
1V
Class II, double insulation
Overload protection: 660V DC or AC rms
M55 instruct rev1.indd 8
11/11/2015CM55
13:34:50
instruct rev1.indd 4
Specification
CM55
AC Clamp Meter
Check out what else you can get from Martindale:
AC Current
Accuracy
Range
Resolution
(50 to 60Hz)
40A
0.01A
400A
0.1A
1.9% + 3
11/11/2015 13:34:49
(60 to 400Hz)
3.0% + 5
Overload protection: 660A DC or AC rms
Resistance and Continuity
Range
Resolution
Open circuit
voltage
Accuracy
Audible
indication
400 :
1:
-1.5V dc
1.0% + 2
<25:
17th Edition Testers
Motor Maintenance Equipment
Accessories
Multifunction Testers
Calibration Equipment
Non-trip Loop Testers
Continuity Testers
Pat Testers & Accessories
Electricians’ Kits
Phase Rotation Testers
Environmental Products
Proving Units
Full Calibration & Repair Service
Socket Testers
Fuse Finders
Thermometers & Probes
Digital Clamp Meters
Test Leads
Digital Multimeters
Voltage Indicators
Labels
Specialist Metrohm Testers (4 & 5kV)
Microwave Leakage Detectors
Specialist Drummond Testers
Overload protection: 600V DC or AC rms
GENERAL
Display: 3¾ digit liquid crystal display with maximum reading 3999
Sample rate 2 times/sec
Polarity: Automatic, positive implied, ‘-‘ for negative polarity
indication
Overrange: (OL) is displayed
Power: 2 x 1.5V, AAA alkaline batteries (IEC LR03, NEDA 24A)
Battery life (alkaline): 500 hours typical for ACV and ACA ranges
800 hours typical for DCV and : ranges
Low battery indication:
symbol is displayed
Auto power off: after 10 minutes
Jaw opening capability: 25.4mm
Dimensions: 203 x 75 x 32mm
Weight: 262g approx, including batteries
Includes: carrying case, set of TL16 test leads, 2 x 1.5V AAA batteries,
instructions
Martindale Electric Company Limited
Metrohm House, Penfold Trading Estate, Imperial Way, Watford WD24 4YY, UK
Tel: +44 (0)1923 441717 Fax: +44 (0)1923 446900
E-mail: sales@martindale-electric.co.uk
Website: www.martindale-electric.co.uk
© 2015 Martindale Electric Company Ltd.
Registered in England No. 3387451. Rev1 LITCM55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising