Datasheet Shutter Coupler 1CH Ed.1

Datasheet Shutter Coupler 1CH Ed.1
SHUTTER COUPLER 1CH
AC/DC shutter adaptor for one channel
ZAC-SHUC1C
Technical Documentation

One output channel to control 12-24VDC shutters.

12-24VDC external power supply needed.

DIN rail unit assembly (EN 50022), with snap fit clamp.

Size 90 x 60 x 35 mm (2 DIN units).

CE directives compliant.
1. Shutter output
channel
3
1
FEATURES
2. Shutter control input
3. External power supply
2
Figure 1: Shutter Coupler 1CH
ASSEMBLY DIAGRAM
GENERAL SYSTEM SPECIFICATIONS
Concept
Description
Type of device
External power supply
Working temperature
Storage temperature
Ambient humidity (relative)
Storage humidity (relative)
Complementary characteristics
Safety class
Operation type
Device action type
Electrical solicitation period
Type of protection
Assembly
Weight
PCB CTI index
Enclosure
Electric operation control device
12 to 24VDC
-10ºC to +60ºC
-20ºC to +70ºC
3 to 95% RH (no condensation)
3 to 95% RH (no condensation)
Class B
II
Continuous operation
Type 1
Long
IP20, clean ambient
Independent control assembly device to
be mounted inside of electrical panels
with DIN rail (EN 50022)
59g.
175 V
PC FR V0 halogen free
ATTACHING TO DIN RAIL
Attaching Shutter Coupler 1CH to DIN rail:
CONTROL INPUT SPECIFICATIONS
Input voltage
Connection type
Recommended cable section
Cable type
Maximum response time
Figure 2: wiring example
230VAC ~ 50/60Hz
Terminal block (screw)
0,5mm² to 2,5mm² (26-12 AWG)
Stranded or solid wire
20ms
SHUTTER OUTPUT CHANNEL SPECIFICATIONS
Output voltage
Maximum current
Maximum power
Recommended cable section
Cable type
Mechanical
Expected life
Electrical
12-24VDC
8A
192W
0,5mm² to 4mm² (20-12 AWG)
Stranded or solid wire
10 million operations (6cpm)
100.000 cycles
Removing Shutter Coupler 1CH from DIN rail:
SAFETY INSTRUCTIONS



The external power supply output voltage must never exceed the shutter operating voltage specified by the
manufacturer. Not following this recommendation could damage the motor.
Installation should only be performed by qualified electricians.
Once installed, the device must not be accessible from the outside.
© Zennio Avance y Tecnología S.L.
Edition 1
Further information www.zennio.com
Page 1 / 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising