Elpro_DVIBOX-2_user_manual_eng
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
•
•
•
•
Up to 15 metres of input cable
Up to 15 metres of output cable
2 separated reconstructed outputs
Max resolution UXGA(1600x1200)
and HDTV (1920 x 1080)
• Cascade connection possible
8
1
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
DVIBOX/2-M
28/05/08
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
CONTENTS
1.0 General
2.0 Power supply
3.0 Settings
4.0 Installation
5.0 Technical data
6.0 Notes
7.0 Accessories
You should carefully read the present manual when installing the DVIBOX/2
unit.
The manufacturer disclaims all liability relative to any damage due to use,
including correct use, of his products.
Product specifications and data may change without any prior notice.
1.0 GENERAL
Thank you for purchasing this product. Carefully check the contents of the
package. It should contain:
− The DVIBOX/2
unit− The present manual
and CE certification
− External power supply
unit and mains cable
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
2
7
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
The DVIBOX/2 unit is a computer and workstation graphics signals distributor
based on DVI format. Using the same it is possible to send the source signal
to two separate destinations; in addition, the DVIBOX/2 also acts as a signal
repeater, since it internally reconstructs the RGB pattern and then reconverts
it: the device makes it possible to remote the video signal at a maximum
resolution of 1600x1200 or HDTV 1920x1080 over a maximum length of 30
metres (15 metres in input and 15 metres in output), on each of the two
outputs. Moreover, as a result of this feature, it is also possible to connect a
number of devices in sequence, achieving greater distances and multiplying
the number of destinations that can be connected.
Individual mode
Cascade mode
6
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
2.0 POWER SUPPLY
The DVIBOX/2 unit must be supplied using the AC/DC adapter provided.
This can be connected to the 230 V AC 50Hz mains using the mains cable.
The power supply unit is compatible for input voltages from 100 to 240 V AC.
The mains cable socket is connected to the relative panel plug on the
adaptor. The 2 pin terminal on the DVIBOX/2 is connected to the adaptor’s 2
pin terminal.
a)
ATTENTION
b)
Do not, for any reason, open or tamper with the external power supply
unit!! Any intervention must be carried out by qualified personnel who
must be informed of the risks of electrical shocks.
c)
In some countries it is necessary to modify the current plug in order to adapt it
to local standard types.
Wires identification complies with the following code:
d)
-Brown
PHASE
(Marked by the letter L, it can be red in colour)
-Blue
NEUTRAL (Marked by the letter N, it can be black in colour)
-Yellow/Green EARTH (Marked by the letter E, it can be green in colour)
e)
a)
b)
c)
d)
e)
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
4
5
DVIBOX/2
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
2.0 POWER SUPPLY
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
3.0 SETTINGS
The unit does not have any internal or external settings prior to use.
The DVIBOX/2 unit must be supplied using the AC/DC adapter provided.
This can be connected to the 230 V AC 50Hz mains using the mains cable.
The power supply unit is compatible for input voltages from 100 to 240 V AC.
The mains cable socket is connected to the relative panel plug on the
adaptor. The 2 pin terminal on the DVIBOX/2 is connected to the adaptor’s 2
pin terminal.
4.0 INSTALLATION
a)
Connect the output of the external power supply unit to the device,
inserting the adaptor’s terminal in the appropriate terminal on the back
of the device.
ATTENTION
b)
Do not, for any reason, open or tamper with the external power supply
unit!! Any intervention must be carried out by qualified personnel who
must be informed of the risks of electrical shocks.
Connect the power supply unit to the mains using the relative cable: the
green ON led, with power supplied, will light up.
c)
Connect the DVI cable from the computer output to the connector called
DVI IN on the back of the device. The green LOCK led located on the
front will come on, indicating the presence of an active DVI source at
the input.
In some countries it is necessary to modify the current plug in order to adapt it
to local standard types.
Wires identification complies with the following code:
d) Connect the DVI cable from the destination which you wish to use as
your main one (i.e. provided with DDC bus) to the connector called OUT1
DDC located on the back of the device. The images generated by the
computer will be displayed on the destination.
-Brown
PHASE
(Marked by the letter L, it can be red in colour)
-Blue
NEUTRAL (Marked by the letter N, it can be black in colour)
-Yellow/Green EARTH (Marked by the letter E, it can be green in colour)
e) Also connect the second destination to the OUT2 output.
ATTENTION
a) Do not exceed 15 metre sections in input (maximum distance guaranteed
by the DVI system is 10 metres)
b) The section of cable in input should comprised a single cable and not by
extensions connected to each other, otherwise the maximum connection
length obtainable may be reduced.
c) Do not exceed 15 metre sections in output (recommended 10 metres)
d) When connecting a number of DVIBOX/2 units in sequence, do not
exceed 15 metres of cable length between any two distributors
e) We recommend using DVI Elpro cables (see section 6.0 Accessories)
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
4
5
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
Individual mode
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
6
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
INSTALLATION AND USE OF THE DVIBOX/25.0 TECHNICAL DATA
DVI format
: single link (2 pixels per clock)
Bandwidth
: 1.6Gbs
Resolution
: up to UXGA(1600x1200) or HDTV(1920x1080)
signals reconstruction mode : digital
outputs
: two, separated
DDC Input
: TTL +5Vdc
output capability
:up to 15 m each one
Input/Output connectors
: DVI-I 29p.f.
Main input
Power consumption
Size (WXDXH)
Weight
:+5 Vdc 3A with AC adapter
:max 10 W
: 200 x 100 x 44
:0.5 Kg
Operating temp.range
Safety
EMC
:0÷45°
:according to EN60065
:according to EN55103-1 and EN55103-2
CE Mark
6.0 NOTES
This product is guaranteed for 2 years as of the date of purchase.
The warranty lapses if the product defect is due to erroneous use or
interventions by third parties.
During the warranty period, Elpro will repair any defective units free of charge.
Defective units must be sent CARRIAGE FREE to Elpro’s premises in Torino
with appropriate shipment note.
Repaired units will be returned CARRIAGE FORWARD to the addressee.
After the warranty period has lapsed Elpro will repair defective units at its
premises in Torino, debiting the customer for shipment charges and the cost
of any intervention.
If you have any doubts or queries when installing the DVIBOX/2
call the Elpro hot line on 011 9348778
or E-mail: info@elprovideolabs.com
2
7
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
DVIBOX/2
SIGNALS DISTRIBUTOR / REPEATER ON STANDARD DVI
7.0 ACCESSORIES
DVI101MM
: Cable DVI-D Single Link m/m 1.5m
DVI105MM
: Cable DVI-D Single Link m/m 5m
DVI110MM
: Cable DVI-D Single Link m/m 10m
DVI115MM
: Cable DVI-D Single Link m/m 15m
DVI105MF
: Cable DVI-D Single Link m/f 5m
ADC001M
: Male DVI Connector D- Single Link
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
8
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising