Pioneer AVH-P3300BT User Guide Manual
Owner’s Manual
DVD AV RECEIVER
AVH-P4300DVD
AVH-P3300BT
English
Downloaded from Caradio-Manual.com Manuals
Contents
Thank you for purchasing this PIONEER product.
To ensure proper use, please read through this manual before using this product. It
is especially important that you read and observe WARNINGs and CAUTIONs in
this manual. Please keep the manual in a safe and accessible place for future reference.
Be sure to read this
! DVD video disc region numbers 8
! Handling guidelines 97
Precautions
IMPORTANT SAFEGUARDS 5
To ensure safe driving 5
To avoid battery exhaustion 6
Ejecting an SD 15
Ejecting an SD 16
Setting the clock 16
Tuner
Introduction of tuner operations 17
Playing moving images
Introduction of video playback
operations 18
Before you start
Information to User 7
For Canadian model 7
The Safety of Your Ears is in Your Hands 7
About this unit 7
About this manual 8
Operating environment 8
After-sales service for Pioneer products 8
Visit our website 9
Resetting the microprocessor 9
Demo mode 10
Adjusting the response positions of the
touch panels (Touch Panel
Calibration) 10
Use and care of the remote control 10
Playing audio
Introduction of sound playback
operations 21
What’s what
Head unit 11
Remote control 12
XM/SIRIUS tuner
Introduction of XM/SIRIUS tuner
operations 29
Basic operations
Basic operations 13
Operating the scroll bar and the scrubber
bar 14
Activating the touch panel keys 14
Common operations for menu settings/
lists 15
Adjusting the LCD panel angle 15
Ejecting a disc 15
Ejecting a disc 15
HD Radioä tuner
Introduction of HD Radioä tuner
operations 31
from Caradio-Manual.com Manuals
2 Downloaded
En
Using Pandoraâ
Introduction of Pandora operations 23
Playing still images
Introduction of still image playback
operations 25
Introduction of still image playback as a
slideshow operations 26
Bluetooth Telephone
Introduction of Bluetooth telephone
operations 27
Using Bluetooth wireless technology
Introduction of Bluetooth telephone
operations 32
Bluetooth audio operations 33
Contents
Detailed instructions
Storing and recalling stations 35
Storing the strongest stations 35
Tuning in to strong signals 35
Tuning in to strong HD Radio signals 35
Using iTunes tagging 36
Switching the media file type 36
Operating the DVD menu 37
Operating this unit’s iPod function from your
iPod 37
Random play (shuffle) 38
Playing all songs in random order (shuffle
all) 38
Repeating playback 38
Playing videos from your iPod 38
Browsing for a video/music on the iPod 39
Resume playback (Bookmark) 40
Frame-by-frame playback 40
Slow motion playback 40
Searching for the part you want to play 40
Changing audio language during playback
(Multi-audio) 40
Changing the subtitle language during
playback (Multi-subtitle) 41
Changing the viewing angle during playback
(Multi-angle) 41
Return to the specified scene 41
Selecting audio output 41
PBC playback 41
Selecting tracks from the track title list 42
Selecting files from the file name list 42
Using advanced sound retriever 42
Changing audiobook speed 42
Displaying lists related to the currently
playing song (Link Search) 42
Playing DivXâ VOD content 42
Capture an image in JPEG files 43
Changing the wide screen mode 43
Downloaded from Caradio-Manual.com Manuals
Selecting and playing the Quick Mix/station
list 44
Storing song information (bookmarks) 44
Switching the XM/SIRIUS channel selection
mode 44
Selecting an XM/SIRIUS channel directly 45
Using the MyMix function 45
Using the Game Alert function 47
Displaying the Radio ID 48
Switching the SIRIUS display 48
Using the Instant Replay function 48
Switching the seek mode 49
Switching the reception mode 49
Calling a number in the phone book 49
Selecting a number by alphabet search
mode 50
Using the missed, received and dialed call
lists 50
Using the missed, received and dialed call
lists on the optional Bluetooth adapter 50
Setting automatic answering 51
Adjusting the other party’s listening
volume 51
Switching the ring tone 51
Using the preset dial lists 51
Making a call by entering phone number 52
Setting the private mode 52
Pairing from this unit 52
Using a Bluetooth device to pair 53
Connecting to a Bluetooth device
automatically 53
Switching visible unit 54
Displaying Bluetooth Device address 54
Entering PIN code for Bluetooth wireless
connection 54
Using a cellular phone to initiate a
connection 54
Registering a connected cellular phone 55
Voice recognition 55
En
3
Contents
Connecting a Bluetooth audio player 55
Connecting to a Bluetooth device
automatically 55
Displaying Bluetooth Device address 56
Menu operations
Introduction of menu operations 57
Audio Adjustments 58
Setting up the DVD player 61
System settings 65
Entertainment settings 70
Customizing menus 71
Other Functions
Changing the picture adjustment 72
Setting rear monitor output 72
Adjusting the response positions of the
touch panels (Touch Panel
Calibration) 73
Using an AUX source 73
Using an external unit 74
Installation
Connecting the units 75
Installation 85
Additional Information
Troubleshooting 88
Error messages 90
Understanding auto EQ error messages 94
Understanding messages 94
Indicator list 95
Handling guidelines 97
Compressed audio compatibility (disc, USB,
SD) 99
iPod compatibility 100
Sequence of audio files 101
Using the display correctly 101
Copyright and trademark 102
Language code chart for DVD 105
from Caradio-Manual.com Manuals
4 Downloaded
En
Specifications 106
Section
Precautions
01
Please read all of these instructions regarding
your display and retain them for future reference.
1 Read this manual fully and carefully before operating your display.
2 Keep this manual handy as a reference for
operating procedures and safety information.
3 Pay close attention to all warnings in this
manual and follow the instructions carefully.
4 Do not allow other persons to use this system until they have read and understood
the operating instructions.
5 Do not install the display where it may (i)
obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operating systems or safety features, including air bags, hazard lamp buttons or (iii)
impair the driver’s ability to safely operate the vehicle.
6 Do not operate this display if doing so in
any way will divert your attention from
the safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you experience difficulty in operating the system or
reading the display, park your vehicle in a
safe location and make necessary adjustments.
7 Please remember to wear your seat belt at
all times while operating your vehicle. If
you are ever in an accident, your injuries
can be considerably more severe if your
seat belt is not properly buckled.
8 Never use headphones while driving.
9 To promote safety, certain functions are
disabled unless the parking brake is on,
and the vehicle is not in motion.
10 Never set the volume of your display so
high that you cannot hear outside traffic
and emergency vehicles.
WARNING
! Do not attempt to install or service your
display by yourself. Installation or servicing of the display by persons without
training and experience in electronic
equipment and automotive accessories
may be dangerous and could expose you
to the risk of electric shock or other
hazards.
Precautions
IMPORTANT SAFEGUARDS
To ensure safe driving
WARNING
! LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
! To avoid the risk of damage and injury and the
potential violation of applicable laws, this unit
is not for use with a video screen that is visible
to the driver.
! To avoid the risk of accident and the potential
violation of applicable laws, no viewing of
front seat video should ever occur while the
vehicle is being driven.
! In some countries or states the viewing of
images on a display inside a vehicle even by
persons other than the driver may be illegal.
Where such regulations apply, they must be
obeyed and this unit’s DVD features should
not be used.
When you attempt to watch a video image
while driving, the warning Viewing of front
seat video source while driving is strictly
prohibited. will appear on the front display.
To watch a video image on the front display,
park your vehicle in a safe place and apply the
parking brake.
Downloaded from Caradio-Manual.com Manuals
En
5
Section
01
Precautions
Parking brake interlock
Certain functions (Video viewing and certain
touch panel keys) offered by this unit could be
dangerous and/or unlawful if used while driving. To prevent such functions from being
used while the vehicle is in motion, there is an
interlock system that senses when the parking
brake is set. If you attempt to use the functions
described above while driving, they will become disabled until you stop the vehicle in a
safe place, and (1) apply the parking brake, (2)
release the parking brake, and then (3) apply
the parking brake again. Please keep the
brake pedal pushed down before releasing the
parking brake.
When using a display
connected to V OUT
This unit’s V OUT is for connection of a display to enable passengers in the rear seats to
watch the DVD or Video CD.
! Please note that the edges of the rear view
camera images may differ slightly according
to whether full screen images are displayed
when backing up, and whether the images are
used for checking the rear when the vehicle is
moving forward.
To avoid battery exhaustion
Keep the vehicle engine running when using
this unit to avoid draining the battery power.
! When no power is supplied to this unit,
such as when the vehicle battery is being
replaced, the microcomputer of this unit returns to its initial condition. We recommend that you transcribe the audio
adjustment data.
WARNING
Do not use with vehicles that do not feature an
ACC position.
WARNING
NEVER install the rear display in a location
where the driver can watch a DVD while driving.
When using the rear view camera
With an optional rear view camera, this unit
can be used as an aid to keep an eye on trailers, or when backing into a tight parking spot.
WARNING
! SCREEN IMAGE MAY APPEAR REVERSED.
! USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY
OR DAMAGE.
CAUTION
! The rear view camera function is to be used
as an aid to keep an eye on trailers, or while
backing up. Do not use for entertainment purposes.
from Caradio-Manual.com Manuals
6 Downloaded
En
Section
Before you start
This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
! AVH-P4300DVD
! This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
The Safety of Your Ears is in
Your Hands
Get the most out of your equipment by playing
it at a safe level—a level that lets the sound
come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound
can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of
sound, so what sounds “normal” can actually
be loud and harmful to your hearing. Guard
against this by setting your equipment at a
safe level BEFORE your hearing adapts.
Before you start
FCC ID: AJDK028
MODEL NO.: AVH-P3300BT
IC: 775E-K028
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment
has very low levels of RF energy that it deemed
to comply without maximum permissive exposure evaluation (MPE). But it is desirable that
it should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles).
02
ESTABLISH A SAFE LEVEL:
! Set your volume control at a low setting.
! Slowly increase the sound until you can
hear it comfortably and clearly, without distortion.
! Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
! Do not turn up the volume so high that you
can’t hear what’s around you.
! Use caution or temporarily discontinue use
in potentially hazardous situations.
! Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many areas.
About this unit
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
Downloaded from Caradio-Manual.com Manuals
En
7
Section
02
Before you start
WARNING
Handling the cord on this product or cords associated with accessories sold with the product
may expose you to chemicals listed on proposition 65 known to the State of California and other
governmental entities to cause cancer and birth
defect or other reproductive harm. Wash hands
after handling.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and overheating could result from contact with liquids.
! Keep this manual handy for future reference.
! Always keep the volume low enough to hear
outside sounds.
! Avoid exposure to moisture.
! If the battery is disconnected or discharged,
any preset memory will be erased.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
About this manual
This unit features a number of sophisticated
functions to ensure superior reception and operation. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this unit’s potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by reading through the manual before you begin
using this unit. It is especially important that
you read and observe WARNINGs and CAUTIONs in this manual.
Operating environment
This unit should be used within the temperature ranges shown below.
Operating temperature range: –10 °C to +60
°C (14 °F to 140 °F)
EN300328 ETC test temperature: –20 °C and
+55 °C (–4 °F and 131 °F)
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary information is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
DVD video disc region numbers
Only DVD video discs with compatible region
numbers can be played on this player. You can
find the region number of the player on the
bottom of this unit and in this manual (refer to
Specifications on page 106).
from Caradio-Manual.com Manuals
8 Downloaded
En
Section
Before you start
For warranty information please see the Limited Warranty sheet included with this unit.
Resetting the microprocessor
By pressing RESET, you can reset the microprocessor to its initial settings without changing the bookmark information.
The microprocessor must be reset in the following situations:
! Before using this unit for the first time after
installation
! If the unit fails to operate properly
! When strange or incorrect messages appear on the display
1
Before you start
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
02
Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
(AVH-P4300DVD)
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
in Canada
http://www.pioneerelectronics.ca
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owner’s manuals, order product
catalogues, research new products, and
much more.
4 Your feedback is important in our continual effort to design and build the most advanced,
consumer-focused product in the industry.
Serial number
RESET button
(AVH-P3300BT)
RESET button
Note
Switch your engine ON or set the ignition switch
to ACC ON before pressing RESET in the following situations:
! After completing connections
! When erasing all stored settings
! When resetting the unit to its initial (factory)
settings
Downloaded from Caradio-Manual.com Manuals
En
9
Section
02
Before you start
Demo mode
WARNING
The feature demo automatically starts when
you select Off for the source and continues
while the ignition switch is set to ACC or ON.
To cancel the feature demo, press and hold
MUTE. Press and hold MUTE again to restart.
Operating the feature demo while the car engine is turned off it may drain the battery
power.
! Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
! Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
! Use one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not
used for a month or longer.
! There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
! Do not handle the battery with metallic tools.
! Do not store the battery with metallic objects.
! If the battery leaks, wipe the remote control
completely clean and install a new battery.
! When disposing of used batteries, comply
with governmental regulations or environmental public institutions’ rules that apply in your
country/area.
! “Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.)”
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel. Refer to Adjusting
the response positions of the touch panels
(Touch Panel Calibration) on page 73.
Use and care of the remote
control
Installing the battery
Slide the tray on the back of the remote control out and insert the battery with the plus (+)
and minus (–) poles aligned properly.
! When using for the first time, pull out the
film protruding from the tray.
CAUTION
Using the remote control
Point the remote control in the direction of the
front panel to operate.
! The remote control may not function properly in direct sunlight.
Important
! Do not store the remote control in high temperatures or direct sunlight.
! The remote control may not function properly
in direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
from Caradio-Manual.com Manuals
10 Downloaded
En
Section
What’s what
03
Head unit
Part
Part
4
5
d
a
+/– (VOLUME/
VOL)
USB port
When connecting,
open the USB connector lid.
c
AUX input jack
(3.5 mm stereo/
video jack)
Use to connect an
auxiliary device.
c/d (TRACK/
SEEK)
d
Auto EQ microphone input jack
Use to connect an
auto EQ microphone.
6
SRC/OFF
7
MUTE
3
What’s what
b
(AVH-P4300DVD)
CAUTION
! (AVH-P3300BT)
Use an optional Pioneer USB cable (CD-U50E)
to connect the USB audio player/USB memory as any device connected directly to the
unit will protrude out from the unit and may
be dangerous.
! Do not use unauthorized products.
! When inserting an SD card into the card slot,
make sure that the label is facing the left and
press the card until it clicks and completely
locks into place.
! For details on how to operate a navigation unit
from this unit, refer to its operation manual.
(AVH-P3300BT)
2
1
3
4
5
76
8
9
a
b
cd
Part
1
RESET
Part
8
MODE
Turning the information display off.
2
h (eject)
9
MENU
Displaying the
menu.
Returning to the
normal display.
3
Disc loading slot
a
SD memory card
slot
Note
When the navigation unit is connected, press
MODE to switch to the navigation display. Press
MODE and hold to turn the display off.
Press MODE again to turn the display on.
Downloaded from Caradio-Manual.com Manuals
En
11
Section
03
What’s what
Remote control
4
Part
Operation
BAND/ESC
Press to select the
tuner band when
tuner is selected as a
source. Also used to
cancel the control
mode of functions.
Press to switch between modes when
playing discs with
compressed audio
and audio data (CDDA) such as CDEXTRA and MIXEDMODE CDs.
MENU
Press to display the
DVD menu during
DVD playback.
TOP MENU
Press to return to the
top menu during DVD
playback.
AUDIO
Press to change the
audio language during
DVD playback.
Press to switch audio
output for Video CD/
DivX.
SUBTITLE
Press to change the
subtitle language during DVD playback.
ANGLE
Press to change the
viewing angle during
DVD playback.
REAR SRC
Press to cycle through
all the available rear
sources.
Press and hold to turn
the rear source off.
7 6
l
j
i
e
f
g
h
k
i
5
Part
Operation
e
Thumb pad
Click to recall Menu.
Use to select a menu
on the DVD menu.
f
RETURN
Press to display the
PBC (playback control) menu during PBC
playback.
f
Press to pause or resume playback.
o
Press to return to the
previous track (chapter).
p
Press to go to the next
track (chapter).
g
Press to stop playback.
a/b(FOLDER/P.CH)
Press to select the
next/previous disc/
folder.
Press to recall radio
station frequencies assigned to preset tuning keys.
g
h
j
k
l
from Caradio-Manual.com Manuals
12 Downloaded
En
Section
Basic operations
04
Basic operations
1
2
Wed 28 May
12:45 PM
4
Radio
Rear
Front
5
6
Rear
View
Disc
iPod
SD
SD
AUX
! Touch panel keys
1
2
Displaying the source menu.
Wed 28 May
12:45 PM
3
4
5
6
Rear
Switching to clock adjustment display.
Refer to Setting the clock on
page 16.
Radio
Source icon
Selecting a favorite source.
When the source icon is not
displayed, it can be displayed
by touching the screen.
Front
Switching the output source
for the rear monitor.
Refer to Setting rear monitor
output on page 72.
Rear
View
Switching the rear view
image on or off.
Turning the unit off.
Turning the unit on using the buttons
1 Press SRC/OFF to turn the unit on.
Turning the unit off using the buttons
1 Press SRC/OFF and hold until the unit turns off.
Basic operations
3
Selecting a source using the buttons
1 Press SRC/OFF to cycle through the sources
listed below:
Selecting a source using the touch panel keys
1 Touch the source icon and then touch the desired
source name.
! XM – XM tuner
! Sirius – SIRIUS tuner
! Radio/HD Radio – Radio/Digital Radio tuner
! AV – AV input
! Disc – Built-in DVD player
! USB/iPod – USB/iPod
! Pandora – Pandora
! SD – SD memory card
! EXT1 – External unit 1
! EXT2 – External unit 2
! AUX – AUX
! TEL/Audio – Bluetooth telephone/audio
(Function of AVH-P4300DVD)
! When the source icon is not displayed, it can be
displayed by touching the screen.
! While operating the menu, you cannot select a
source by touching the source icon.
Adjusting the volume
1 Press +/– (VOLUME/VOL) to adjust the volume.
Notes
! In this manual, iPod and iPhone will be referred to as “iPod”.
! The USB/iPod icon will change as follows:
— USB is displayed when a USB storage device is connected.
— iPod is displayed when an iPod is connected.
— USB/iPod is displayed when no device is
connected.
! When appropriately set up, the image from
the rear view camera can be displayed automatically. For details, refer to Setting the rear
view camera (back up camera) on page 67.
! An external unit refers to a Pioneer product,
such as those which will be available in the future. Although incompatible as a source, the
basic functions of up to two external units can
be controlled with this unit. When two external units are connected, the external units are
automatically allocated to external unit 1 or
external unit 2.
! If the HD Radio tuner is connected to this
unit, tuner source is skipped.
Downloaded from Caradio-Manual.com Manuals
En
13
Section
04
Basic operations
Operating the scroll bar
and the scrubber bar
Activating the touch panel
keys
1
1
12
Audio
Fader/Balance
F/R 0 L/R 0
Graphic EQ
Super Bass
Auto EQ
Wed 28 May
12:45 PM
01
Sonic Center Control
01
L+R
01
Abcdeabcdeabcdeabcdeab
On
L/R 0
Loudness
High
Subwoofer
Off
8
12
01:45
21
1
-02:45
22
1
Wed 28 May
12:45 PM
01
01
Return
L+R
01
3
2
Abcdeabcdeabcdeabcdeab
8
12
01:45
-02:45
2
1 Scroll icon
Appears when selectable items are hidden.
2 Scrubber bar
Appears when the playback point can be specified or set by dragging.
Viewing the hidden items
1 Touch the scroll icon or drag the scrubber bar to
view any hidden items.
Specifying the playback point
1 Drag the scrubber bar on the screen.
(Not available when the scrubber bar is grayed
out.)
1 Touch panel keys
Perform various operations by touching the
panel.
2 Open/close keys
Control the touch panel key area by touching
these keys.
1
Turning the display to simplified display.
Returning to the normal display by touching the screen
when playing moving
images.
Returning to the normal display by touching same icon
when playing audio.
2
Viewing the hidden touch
panel keys.
3
Shorten the touch panel
area.
from Caradio-Manual.com Manuals
14 Downloaded
En
Section
Basic operations
Common operations for
menu settings/lists
04
2 Adjust the LCD panel to an easily viewable angle.
(AVH-P3300BT only)
Starting the Bluetooth telephone
menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
Displaying the menu.
Refer to Introduction of menu operations on page 57.
Displaying still images as a slide
show when listening to another
source.
Viewing slide shows.
Refer to Introduction of still image
playback operations on page 25.
Returning to the previous display.
Returning to the previous list/category (the folder/category one level
higher.)
Returning the panel to the upright
position.
# As the set angle is saved, the LCD panel will
automatically be adjusted to the same position
the next time the LCD panel is opened.
Ejecting a disc
Basic operations
Displaying the list menu.
Starting the search function.
Laying the panel down.
(AVH-P4300DVD)
1 Press h(eject) to display the ejecting
menu.
2
Eject a disc.
Ejecting a disc.
! Press and hold MENU to display
Picture Adjustment.
Refer to Changing the picture adjustment
on page 72.
Ejecting a disc
Adjusting the LCD panel angle
(AVH-P3300BT)
(Function of AVH-P4300DVD)
% Press h (eject).
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fingers.
1 Press h(eject) to display the ejecting
menu.
Ejecting an SD
(AVH-P4300DVD)
1 Press h(eject) to display the ejecting
menu.
2
Eject an SD.
Ejecting an SD.
3
Downloaded from Caradio-Manual.com Manuals
Press an SD to eject.
En
15
Section
Basic operations
04
Ejecting an SD
(AVH-P3300BT)
% Press an SD to eject.
Setting the clock
1 Switch to Clock Adjustment display.
Refer to Basic operations on page 13.
2
Select the item to set.
3 Touch a or b to set the correct date
and time.
from Caradio-Manual.com Manuals
16 Downloaded
En
Section
Tuner
05
Introduction of tuner
operations
1
Radio
Local
Abcdeabcdeabcde
Abcdeabcdeabcde
Abcdeabcdeabcde
Manual tuning (step by step) using the buttons
1 Press c or d (TRACK/SEEK).
2
3
Seek tuning using the buttons
1 Press and hold c or d (TRACK/SEEK).
Wed 28 May
12:45 PM
Band:
FM1
87.9 MHz
4
5
Tuner
87.9MHz
P.ch 2
Note
Listening AM radio while an iPod is charged from
this unit may generate noise. In this case, disconnect the iPod from this unit.
6
! Touch panel keys
1
Turning local seek tuning on
and off.
Refer to Tuning in to strong
signals on page 35.
2
Switching the equalizer
curves.
Refer to Using the equalizer
on page 58.
Touch and hold for more
than two seconds to turn the
auto-equalizer on or off.
Refer to Using the autoequalizer on page 59.
3
Displaying the preset channel list.
Refer to Storing and recalling
stations on page 35.
Refer to Storing the strongest
stations on page 35.
4
Band:
Selecting a band (FM1, FM2,
FM3 for FM or AM).
5
Recalling radio station frequencies assigned to preset
tuning keys.
6
Saving song information
(tag) from the broadcasting
station to your iPod.
Refer to Using iTunes tagging
on page 36.
TAG
Downloaded from Caradio-Manual.com Manuals
En
17
Section
06
Playing moving images
Introduction of video
playback operations
You can view DVD/DVD-R/DVD-RW/CD/CD-R/
CD-RW/USB/SD/iPod.
DVD video
! (AVH-P3300BT)
If an iPod with video capabilities is connected to this unit using an interface cable
such as the CD-IU50V (sold separately), you
can enjoy the video contents of the iPod as
an iPod source.
! Touch panel keys
1
Selecting the repeat range.
Refer to Repeating playback
on page 38.
2
During playback, touch the
point at which you want to resume playback the next time
the disc is loaded.
Refer to Resume playback
(Bookmark) on page 40.
3
Changing the screen mode.
Refer to Changing the wide
screen mode on page 43.
4
Switching the equalizer
curves.
Refer to Using the equalizer
on page 58.
Touch and hold for more
than two seconds to turn the
auto-equalizer on or off.
Refer to Using the autoequalizer on page 59.
5
Switching between audio
languages during playback.
Refer to Changing audio language during playback (Multiaudio) on page 40.
6
Switching between subtitle
languages during playback.
Refer to Changing the subtitle language during playback
(Multi-subtitle) on page 41.
7
Switching among viewing
angles during playback.
Refer to Changing the viewing angle during playback
(Multi-angle) on page 41.
Wed 28 May
12:45 PM
01
01
L+R
01
Abcdeabcdeabcdeabcdeab
8
12
01:45
-02:45
Return
Video CD
Return
iPod video
iPod
S.Rtrv
ALL
Songs
Wed 28 May
12:45 PM
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
2067/12345
01:45
-02:45
When playing a disc containing a mixture
of various media file types
01:45
-02:45
! (AVH-P4300DVD)
If an iPod with video capabilities is connected to this unit using an interface cable
such as the CD-IU200V (sold separately),
you can enjoy the video contents of the
iPod as an iPod source.
from Caradio-Manual.com Manuals
18 Downloaded
En
Section
Playing moving images
8
a
Starting the search function.
Refer to Searching for the part
you want to play on page 40.
Refer to Selecting files from
the file name list on page 42.
Displaying iPod menus.
Refer to Playing videos from
your iPod on page 38 and
Browsing for a video/music
on the iPod on page 39.
Pausing playback.
Returning to normal playback during paused, slow
motion, or frame-by-frame
playback.
b
Displaying the DVD menu
during DVD playback.
Refer to Operating the DVD
menu on page 37.
c
Returning to the top menu
during DVD playback.
d
Stopping playback.
Stopping playback at the
point set in Resume playback.
Touch one more time to stop
playback completely when
playing DivX.
Refer to Resume playback
(Bookmark) on page 40.
e
Displaying arrow keys to operate the DVD menu.
Refer to Using the arrow keys
on page 37.
f
Skipping to another title.
Selecting a folder during
DivX file playback.
g
Moving ahead one frame at a
time during playback.
Refer to Frame-by-frame playback on page 40.
Touch and hold for more
than two seconds to slow
down playback speed.
Speeding up the playback
speed in four steps during
slow motion playback on
DVD video/Video CD.
h
Speeding down the playback
speed in four steps, during
slow motion playback on
Video CD.
i
Returning to the specified
scene to which the DVD currently being played has been
preprogrammed to return.
Refer to Return to the specified scene on page 41.
Return
j
Playing the video on your
iPod in a random order.
Refer to Random play (shuffle) on page 38.
k
Switching the Advanced
sound retriever function setting when playing a video on
your iPod.
Refer to Using advanced
sound retriever on page 42.
l
Conducting operation from
your iPod and listening to it
using your car’s speakers.
Refer to Operating this unit’s
iPod function from your iPod
on page 37.
m
Switching between media
file types to play on DVD/CD/
USB/SD.
Refer to Switching the media
file type on page 36.
Downloaded from Caradio-Manual.com Manuals
En
Playing moving images
9
Switching the audio output,
when playing video discs recorded with LPCM audio.
Refer to Selecting audio output on page 41.
Switching between stereo
and monaural audio output,
when playing Video CD
discs.
06
19
Section
06
Playing moving images
Playing back videos
1 Insert the disc into the disc loading slot with the
label side up.
Playback will automatically start.
! If you are playing a DVD or Video CD, a menu
may appear. Refer to Operating the DVD menu on
page 37 and PBC playback on page 41.
! When the automatic playback function is on, the
unit will skip the DVD menu and automatically
start playback from the first chapter of the first
title. Refer to Automatic playback of DVDs on page
64.
! While an iPod is connected to this unit, PIONEER,
Accessory Attached or (check mark) is displayed on the iPod.
! When the source icon is not displayed, it can be
displayed by touching the screen.
! Disconnect headphones from the iPod before
connecting it to this unit.
! Depending on the iPod model and the amount of
data stored in the iPod, it may take some time for
playback to begin.
! Use the touch panel keys to select the iPod after
connecting it to this unit.
! No Device is displayed when disconnecting the
iPod.
! If a message is displayed after loading a disc containing DivX VOD content, touch Play.
Refer to Playing DivXâ VOD content on page 42.
tails, refer to Resume playback (Bookmark) on
page 40.
! Some operations may not be available while
watching a DVD due to the programming of
the disc. In such cases, the icon appears
on the screen.
! To ensure proper operation, connect the dock
connector cable from the iPod directly to this
unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
However, the iPod can be turned on or off
when you select an SD as the source.
Ejecting a disc
1 Refer to Ejecting a disc on page 15 or Ejecting an
SD on page 15.
Selecting a chapter using the buttons
1 Press c or d (TRACK/SEEK).
Fast forwarding or reversing using the buttons
1 Press and hold c or d (TRACK/SEEK).
! Fast forward/fast rewind may not always be possible on some discs. In such cases, normal playback will automatically resume.
Notes
! This DVD player can play back a DivX file recorded on CD-R/RW or DVD-R/RW. (Please
see the following section for files that can be
played back. Refer to page 99.)
! Do not insert anything other than a DVD (-R/RW) or CD (-R/-RW) into the disc loading slot.
! If the bookmark function is on, DVD playback
resumes from the selected point. For more de-
from Caradio-Manual.com Manuals
20 Downloaded
En
Section
Playing audio
07
Introduction of sound
playback operations
You can listen to DVD-R/DVD-RW/CD/CD-R/
CD-RW/USB/SD/iPod sound files.
1 2
3 4
S.Rtrv
ROM
ALL
Songs
5
Displaying a list of track
titles/file names to select
songs on a CD.
Refer to Selecting tracks
from the track title list on
page 42.
Displaying the file name
list to select the files.
Refer to Selecting files
from the file name list on
page 42.
Displaying iPod menus.
Refer to Browsing for a
video/music on the iPod
on page 39.
6
Pausing and starting
playback.
7
Switching the text information to display on this
unit when playing MP3/
WMA/AAC files.
8
Selecting a folder.
9
Switching between
media file types on a
DVD/CD/USB/SD.
Refer to Switching the
media file type on page
36.
a
Playing songs on the
iPod in random order.
Refer to Random play
(shuffle) on page 38.
b
Changing the speed of
audiobook playback on
the iPod.
Refer to Changing audiobook speed on page 42.
5
Wed 28 May
12:45 PM
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
87
125
01:45
-02:45
6
7
8
9
CD
f
1 a b 3 4i
iPod
S.Rtrv
ALL
Songs
5
Wed 28 May
12:45 PM
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
Abcdeabcdeabcdeabcdeab
2067/12345
01:45
6
-02:45
h
g c d e
iPod audio
You can control an iPod with this unit by using
a cable such as the CD-IU50 (sold separately).
! Touch panel keys
1
Selecting the repeat
range.
Refer to Repeating playback on page 38.
2
Playing songs in random
order.
Refer to Random play
(shuffle) on page 38.
3
Switching the Advanced
sound retriever function
setting when playing
audio.
Refer to Using advanced
sound retriever on page
42.
Downloaded from Caradio-Manual.com Manuals
En
Playing audio
4
Switching the equalizer
curves.
Refer to Using the equalizer on page 58.
Touch and hold for more
than two seconds to turn
the auto-equalizer on or
off.
Refer to Using the autoequalizer on page 59.
21
Section
07
Playing audio
c
Switching to Link Search
mode to play songs related to the currently
playing song on the iPod.
Refer to Displaying lists
related to the currently
playing song (Link Search)
on page 42.
d
Playing all songs on the
iPod in random order.
Refer to Playing all songs
in random order (shuffle
all) on page 38.
e
Conducting operation
from your iPod and listening to it using your car’s
speakers.
Refer to Operating this
unit’s iPod function from
your iPod on page 37.
! Text information
f
Displaying the Songs list
on the iPod.
Refer to Searching for a
video/music by category
on page 39.
g
Displaying the Artists list
on the iPod.
Refer to Searching for a
video/music by category
on page 39.
h
Displaying the Albums
list on the iPod.
Refer to Searching for a
video/music by category
on page 39.
! Artwork display
i
Starting Album Link Search on your iPod
when you touch the artwork display.
Refer to Displaying lists related to the currently playing song (Link Search) on page 42.
Playing back sound
1 Insert the disc into the disc loading slot with the
label side up.
Playback will automatically start.
! While an iPod is connected to this unit, PIONEER,
Accessory Attached or (check mark) is displayed on the iPod.
! When the source icon is not displayed, it can be
displayed by touching the screen.
! Disconnect headphones from the iPod before
connecting it to this unit.
! Depending on the iPod model and the amount of
data stored in the iPod, it may take some time for
playback to begin.
! Use the touch panel keys to select the iPod after
connecting it to this unit.
! No Device is displayed when disconnecting the
iPod.
Ejecting a disc
1 Refer to Ejecting a disc on page 15 or Ejecting an
SD on page 15.
Selecting a track using the buttons
1 Press c or d (TRACK/SEEK).
Fast forwarding or reversing using the buttons
1 Press and hold c or d (TRACK/SEEK).
Notes
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! To ensure proper operation, connect the dock
connector cable from the iPod directly to this
unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
However, the iPod can be turned on or off
when you select an SD as the source.
! If the characters recorded on the disc are not
compatible with this unit, those characters
will not be displayed.
! Text information may not be correctly displayed depending on the recorded environment.
! Disconnect the USB portable audio player/
USB memory when you are done using it.
! When you select Clock or Speana on Selecting the background display on page 70, the artwork is not displayed.
from Caradio-Manual.com Manuals
22 Downloaded
En
Section
Using Pandora
â
08
Introduction of Pandora
operations
You can play the Pandora by connecting your
iPod which was installed the Pandora application.
8
Pandora
3
1 2
S.Rtrv
Wed 28 May
12:45 PM
Abcdeabcdeabcdeabcde
Abcdeabcdeabcdeabcde
Abcdeabcdeabcdeabcde
Abcdeabcdeabcdeabcde
01:45
5 6 7
Important
Requirements to access the Pandora music service using the Pioneer car audio/video products:
! Apple iPhone (first generation), iPhone 3G,
iPhone 3GS or iPhone 4 with firmware version
3.0 or later.
! Latest version of the Pandora application for
the iPhone, downloaded to your device.
(Search Apple iTunes App Store for
“Pandora”).
! Current Pandora account (Free account and
paid accounts available from Pandora; create
a free account online at
http://www.pandora.com/register or through
the Pandora application for the iPhone).
! iPhone Data Plan.
Note: if the Data Plan for your iPhone does
not provide for unlimited data usage, additional charges from AT&T may apply for accessing the Pandora service via AT&T’s 3G and/or
EDGE networks.
! Connection to the Internet via 3G, EDGE or
WiFi network.
! Optional Pioneer adapter cable connecting
your iPhone to the Pioneer car audio/video
products.
Using Pandoraâ
4
-02:45
Limitations:
! Access to the Pandora service will depend on
the availability of a cellular and/or WiFi network for purposes of allowing your iPhone to
connect to the Internet.
! Pandora’s service is currently only available in
the U.S.
! Ability of the Pioneer car audio/video products
to access the Pandora service is subject to
change without notice and could be affected
by any of the following: compatibility issues
with future firmware versions of iPhones;
compatibility issues with future firmware versions of the Pandora application for the
iPhone; changes to the Pandora music service
by Pandora; discontinuation of the Pandora
music service by Pandora.
! Certain functionality of the Pandora service is
not available when accessing the service
through the Pioneer car audio/video products,
including, but not limited to, creating new stations, deleting stations, emailing current stations, buying songs from iTunes, viewing
additional text information, logging in to
Pandora, and adjusting Cell Network Audio
Quality.
Pandora Internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.
You can play the Pandora by connecting your
iPod which was installed the Pandora application.
! Touch panel keys
Downloaded from Caradio-Manual.com Manuals
En
23
Section
08
Using Pandoraâ
1
Switching the advanced
sound retriever function
setting while playing
Pandora.
Refer to Using advanced
sound retriever on page
42.
2
Switching the equalizer
curves.
Refer to Using the equalizer on page 58.
Touch and hold for more
than two seconds to turn
the auto-equalizer on or
off.
Refer to Using the autoequalizer on page 59.
3
Displaying the QuickMix/
station list to select
QuickMix or the desired
station.
Refer to Selecting and
playing the Quick Mix/station list on page 44.
4
Pausing and starting
playback.
5
Storing song information
(Bookmark).
Refer to Storing song information (bookmarks) on
page 44.
6
Giving a “Thumbs Down”
for the song currently
playing and then skipping to the next song.
7
Giving a “Thumbs Up” for
the song currently playing.
Playing songs
1 Open the USB connector cover.
2 Connect an iPod to the USB cable using an iPod
Dock Connector.
3 Start up the Pandora application installed on the
iPod.
Skipping tracks
1 Press d.
! Text information
8
Playing the station list.
from Caradio-Manual.com Manuals
24 Downloaded
En
Section
Playing still images
09
Introduction of still image
playback operations
4
Displaying the file name
list to select the files.
Refer to Selecting files from
the file name list on page
42.
5
Starting or pausing the slideshow.
6
Rotating the displayed picture 90° clockwise.
7
Capturing an image in
JPEG files.
Refer to Capture an image
in JPEG files on page 43.
8
Selecting a folder.
9
Switching between media
file types.
Refer to Switching the
media file type on page 36.
You can view still images saved in CD-R/CDRW/USB/SD.
CD
1 2 3
4
Wed 28 May
Photo
Off
12:45 PM
Full
Abcdeabcdeabcde
Abcdeabcdeabcde
2
2
Capture
5
6 7
8
01:45
-02:45
When loading a CD-R/CD-RW/USB/SD containing JPEG picture files, this unit starts a slideshow from the first folder/picture on the
disc/device. The player displays the pictures in
each folder on the CD-R/CD-RW in alphabetical order by file name.
The table below shows the controls for viewing
a slideshow.
! Touch panel keys
Touch any of the following touch panel keys
to select the function to be adjusted.
1
Selecting the repeat range.
Refer to Repeating playback
on page 38.
2
Playing files in a random
order.
Refer to Random play (shuffle) on page 38.
3
Changing the screen
mode.
Refer to Changing the wide
screen mode on page 43.
Playing still images
1 Insert the disc into the disc loading slot with the
label side up.
Playback will automatically start.
! When the source icon is not displayed, it can be
displayed by touching the screen.
Playing still images
When playing a disc containing a mixture
of various media file types
Ejecting a disc.
1 Refer to Ejecting a disc on page 15 or Ejecting an
SD on page 15.
Selecting a file using the buttons
1 Press c or d (TRACK/SEEK).
Fast file searching
1 Press and hold c or d (TRACK/SEEK).
! You can search 10 JPEG files at a time.
Notes
! This unit can play back a JPEG file recorded
on CD-R/CD-RW/SD/USB storage device.
(Please see the following section for files that
can be played back. Refer to page 99.)
Downloaded from Caradio-Manual.com Manuals
En
25
Section
09
Playing still images
! Files are played back in file number order and
folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
Introduction of still image
playback as a slideshow
operations
You can view still images saved in CD-R/CDRW/USB/SD as a slideshow when listening to
another source.
1 2 3
Off
4
5
Selecting a file.
6
Starting or pausing the slideshow.
7
Rotating the displayed picture 90° clockwise
8
Capturing an image in
JPEG files.
Refer to Capture an image
in JPEG files on page 43.
1 Start slideshow when listening to another source.
Refer to Common operations for menu settings/lists on page 15.
Full
Displaying still images as a slide
show.
Capture
6
5
7 8
The table below shows the controls for viewing
a slideshow.
! Touch panel keys
Touch any of the following touch panel keys
to select the function to be adjusted.
1
Selecting the repeat range.
Refer to Repeating playback
on page 38.
2
Playing files in a random
order.
Refer to Random play (shuffle) on page 38.
3
Changing the screen
mode.
Refer to Changing the wide
screen mode on page 43.
4
Selecting a folder.
2 Select the device containing the files
that you want to display.
! Disc – Built-in DVD player
! USB – USB
! SD – SD memory card
# To cancel searching, touch Cancel.
Note
When the USB or SD source is selected, this unit
cannot view still images on USB/SD as a
slideshow.
from Caradio-Manual.com Manuals
26 Downloaded
En
Section
Bluetooth Telephone
10
Introduction of Bluetooth
telephone operations
1 Incoming call notice
Indicates that an incoming call has been received and has not been checked yet.
! Not displayed for calls made when your
cellular phone is disconnected from this
unit.
Telephone standby display
1
Wed 28 May
Radio
12:45 PM
1
2 Touch panel keys
ABCDEHGHI 01
1
Switching the mode to enter
the phone number directly.
Refer to Making a call by entering phone number on page
52.
2
Switching to the call history
list.
Refer to Using the missed, received and dialed call lists on
page 50.
3
Switching to the phone book
mode.
Refer to Calling a number in
the phone book on page 49.
Refer to Selecting a number
by alphabet search mode on
page 50.
4
Turning automatic answering
on or off.
Refer to Setting automatic answering on page 51.
5
Turning the ring tone for incoming calls on or off.
Refer to Switching the ring
tone on page 51.
6
Displaying the preset dial
screen.
Refer to Using the preset dial
lists on page 51.
7
Displaying the Bluetooth
connection menu.
Refer to the instructions
from page 52 to page 54.
8
Turning private mode on or
off.
Refer to Setting the private
mode on page 52.
9
Adjusting the other party’s
listening volume.
Refer to Adjusting the other
party’s listening volume on
page 51.
Downloaded from Caradio-Manual.com Manuals
En
012345678901
Abcdeabcdeabcde
Abcdeabcdeabcde
Abcdeabcdeabcde
P.CH 2
Off
On
Band:
FM1
87.9 MHz
2
4 5 7
1 2 6 3
When switching to the entering phone
number mode
Wed 28 may
12:45 PM
2
3
4
5
6
7
8
9
*
0
#
1
ABCDEHGHI 01
012345678901
+
Off
C
2 8 a 9b
You can use Bluetooth telephone (AVH-P3300BT
only).
Important
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine running can drain the battery power.
! Advanced operations that require attention
such as dialing numbers on the monitor, etc.,
are prohibited while driving. Park your vehicle
in a safe place when using these advanced
operations.
! Operations available may be limited depending on the cellular phone connected to this
unit.
! Be sure to park your vehicle in a safe place
and apply the parking brake when performing
this operation.
Bluetooth Telephone
1
27
Section
10
Bluetooth Telephone
a
Accepting an incoming call.
Making a phone call, when
selecting a phone number.
Switching between callers on
hold.
b
Ending a call.
Rejecting an incoming call.
Canceling call waiting.
Notes
! Private mode can only be operated while you
are talking on the phone.
! To end the call, both you and the other caller
must hang up your phones.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
First, you need to connect a Bluetooth telephone
to this unit.
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless technology, see following section. Using a Bluetooth device to pair on page 53 and Pairing from this unit
on page 52.
! You may also need to enter a PIN code into
this unit. If your telephone requires a PIN
code to establish a connection, look for the
code on the telephone or in its accompanying
documentation. Refer to Entering PIN code for
Bluetooth wireless connection on page 54.
2 Volume adjustment
Adjust the earpiece volume of your cellular phone
to your preference. The unit will record the adjusted volume level as the default setting.
! The volume of the caller’s voice and ring tone
may vary depending on the type of cellular
phone.
! If there is a large volume difference between
the ring tone and caller’s voice, the overall volume level may become unstable.
! Make sure to adjust the volume to a proper
level before disconnecting the cellular phone
from the unit. If the volume is muted (zero
level) on your cellular phone, the volume level
of your cellular phone remains muted even
after the cellular phone is disconnected.
from Caradio-Manual.com Manuals
28 Downloaded
En
Section
XM/SIRIUS tuner
11
Introduction of XM/SIRIUS
tuner operations
SIRIUS tuner
1 2 3
SIRIUS
Mode
All CH
Memo
Off
Abcdeabcdeabcde
4
Team
Off
5
Wed 28 may
12:45 PM
CH183
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIRIUS operation manual.
! With this unit, you can operate one additional function: XM/SIRIUS channel direct
selection. Refer to Selecting an XM/SIRIUS
channel directly on page 45.
! Touch panel keys
P.CH 2
Band:
SIRIUS CH183
1
6 7
Instant
Replay
8
Memo
Memo Game
Info
Edit
Team
Setting
9 a b c d
2
XM tuner
1
XM
4
Mode
All CH
Abcdeabcdeabcde
Abcdeabcdeabcde
Abcdeabcdeabcde
Abcdeabcdeabcde
5
Memo
On
Memo
Off
Tuning the MyMix function
on or off for the SIRIUS tuner.
Refer to Turning the MyMix
function on or off on page 46.
Wed 28 may
12:45 PM
CH183
3
Team
On
Team
Off
P.ch 2
Band:
XM
Mode
Category
Selecting a channel by number or category.
Refer to Switching the XM/
SIRIUS channel selection
mode on page 44.
Turning the Game Alert on or
off for the SIRIUS tuner.
Refer to Switching the Game
Alert on or off on page 48.
CH183
4
Switching the equalizer
curves.
Refer to Using the equalizer
on page 58.
Touch and hold for more
than two seconds to turn the
auto-equalizer on or off.
Refer to Using the autoequalizer on page 59.
5
Displaying the preset channel list.
Refer to Storing and recalling
stations on page 35.
Selecting a channel directly.
Refer to Selecting an XM/SIRIUS channel directly on page
45.
Selecting a channel from the
XM channel list.
Refer to Selecting a channel
from the XM channel list display on page 45.
6
Memo
8
Memo
Edit
a b
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold separately.
For details concerning operation, refer to the
XM tuner’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner’s operation manual.
You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
Downloaded from Caradio-Manual.com Manuals
En
XM/SIRIUS tuner
XM
Mode
All CH
29
Section
11
XM/SIRIUS tuner
6
Band:
Selecting a band (XM1, XM2
or XM3) for XM tuner.
Selecting a band (SIRIUS1,
SIRIUS2 or SIRIUS3) for the
SIRIUS tuner.
Recalling radio station frequencies assigned to preset
tuning keys.
Refer to Storing and recalling
stations on page 35.
Selecting the channel category when selecting Mode
Category.
Refer to Switching the XM/
SIRIUS channel selection
mode on page 44 and Selecting a SIRIUS channel from a
channel category on page 44.
8
Manual tuning (step by step) using the buttons
1 Press c or d (TRACK/SEEK).
Seek tuning using the buttons
1 Press and hold c or d (TRACK/SEEK).
Note
You can also perform tuning from a desired channel category. (Refer to Selecting a SIRIUS channel
from a channel category on page 44.)
Selecting a track, fast forwarding/reversing or pausing/playing for the SIRIUS
tuner.
Refer to Using the Instant Replay function on page 48.
9
Instant
Replay
a
Memo
Storing the song title and artist name.
Refer to Making the MyMix
playlist on page 45.
Memo
Edit
Switching to memo edit
mode.
Refer to Setting up a song
alert on page 46.
Refer to Deleting a song from
the MyMix playlist for XM
tuner on page 47.
Refer to Deleting a song from
the MyMix playlist for SIRIUS
tuner on page 47.
b
7
c
Game
Info
Displaying information on
games for the SIRIUS tuner.
Refer to Displaying game information on page 48.
d
Team
Setting
Selecting teams for game
alert on the SIRIUS tuner.
Refer to Selecting teams for
Game Alert on page 47.
Switching the SIRIUS information.
Refer to Switching the SIRIUS display on
page 48.
Touch and hold for more than two seconds
to scroll the text.
! SIRIUS tuner information
from Caradio-Manual.com Manuals
30 Downloaded
En
Section
HD Radioä tuner
12
Introduction of HD Radioä
tuner operations
1 2 3
Digital
Radio
Local
Seek
All
Abcdeabcdeabcde
Blending
D/A Auto
4
5
12:45 PM
87.9MHz
7
8
8
9
This HD Radio Ready receiver is ready to receive HD Radio broadcasts when connected
to the HD Radio tuner (e.g. GEX-P20HD), sold
separately.
For details concerning operation, refer to the
HD Radio tuner’s operation manual.
! Touch panel keys
2
Seek
All
Seek
HD
3
Blending
D/A Auto
Blending
Analog
4
TAG
9
Saving song information
(tag) from the broadcasting
station to your iPod.
! Digital Radio tuner information
7
Switching the digital radio tuner information.
Manual tuning (step by step) using the buttons
1 Press c or d (TRACK/SEEK).
Seek tuning using the buttons
1 Press and hold c or d (TRACK/SEEK).
HD Radioä tuner
Turning local seek tuning on
or off.
Refer to Tuning in to strong
HD Radio signals on page 35.
1
Selecting a band (FM1, FM2,
FM3 for FM or AM).
Recalling radio station frequencies assigned to preset
tuning keys.
Refer to Storing and recalling
stations on page 35.
TAG
87.9 MHz
6
Band:
6
Wed 28 may
P.CH 2
Band:
FM1
Displaying the preset channel list.
Refer to Storing and recalling
stations on page 35.
5
Switching between Digital
broadcasting station seek
and normal seek.
Refer to Switching the seek
mode on page 49.
Switching to the analog
broadcast of the same frequency.
Refer to Switching the reception mode on page 49.
Switching the equalizer
curves.
Refer to Using the equalizer
on page 58.
Touch and hold for more
than two seconds to turn the
auto-equalizer on or off.
Refer to Using the autoequalizer on page 59.
Downloaded from Caradio-Manual.com Manuals
En
31
Section
13
Using Bluetooth wireless technology
Introduction of Bluetooth
telephone operations
During a call
2
3
1
Switching the equalizer
curves.
Refer to Using the equalizer
on page 58.
Touch and hold for more
than two seconds to turn the
auto-equalizer on or off.
Refer to Using the autoequalizer on page 59.
2
Accepting an incoming call.
Making a phone call, when
selecting a phone number
from the dialed and received
call history.
3
Ending a call.
Rejecting an incoming call.
Canceling call waiting.
4
Displaying the received/
missed call history.
Selecting a phone number
from the call history.
Refer to Using the missed, received and dialed call lists on
the optional Bluetooth adapter on page 50.
5
Displaying the dialed call history.
Selecting a phone number
from the call history.
Refer to Using the missed, received and dialed call lists on
the optional Bluetooth adapter on page 50.
6
Scrolling the phone number.
Touch and hold for more
than two seconds to activate
connection mode on this
unit and establish a Bluetooth wireless connection
from your phone.
Refer to Using a cellular
phone to initiate a connection
on page 54.
1
Wed 28 May
TEL
12:45 PM
Abcdeabc
Text
Scroll
REG
4 5 6 7 8 9
Except during a call
Text
Scroll
REG
a
When you connect a Bluetooth adapter (e.g.
CD-BTB200 )(sold separately) to AVHP4300DVD, you can control Bluetooth telephone.
But the available features are limited.
Important
! In some countries, CD-BTB200 is not sold on
the market.
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine running can drain the battery power.
! Advanced operations that require attention
such as dialing numbers on the monitor, etc.,
are prohibited while driving. Park your vehicle
in a safe place when using these advanced
operations.
! Operations available may be limited depending on the cellular phone connected to this
unit.
! Touch panel keys
from Caradio-Manual.com Manuals
32 Downloaded
En
Text
Scroll
Section
Using Bluetooth wireless technology
8
Turning automatic answering
on or off.
Refer to Setting automatic answering on page 51.
Touch and hold for more
than two seconds to connect
to a Bluetooth telephone
automatically.
Refer to Connecting to a Bluetooth device automatically on
page 55.
9
Turning the ring tone for incoming calls on or off.
Refer to Switching the ring
tone on page 51.
Touch and hold for more
than two seconds to display
the Bluetooth device address
of your cellular phone and
the Bluetooth adapter.
Refer to Displaying Bluetooth
Device address on page 56.
a
Switching between Bluetooth
telephone and Bluetooth
audio.
Touch and hold for more
than two seconds to start
voice recognition.
Refer to Voice recognition on
page 55.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
First, you need to connect a Bluetooth telephone
to this unit.
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless technology, see following section. Using a cellular phone
to initiate a connection on page 54 and Registering
a connected cellular phone on page 55.
2 Volume adjustment
Adjust the earpiece volume of your cellular phone
to your preference. The unit will record the adjusted volume level as the default setting.
! The volume of the caller’s voice and ring tone
may vary depending on the type of cellular
phone.
! If there is a large volume difference between
the ring tone and caller’s voice, the overall volume level may become unstable.
! Make sure to adjust the volume to a proper
level before disconnecting the cellular phone
from the unit. If the volume is muted (zero
level) on your cellular phone, the volume level
of your cellular phone remains muted even
after the cellular phone is disconnected.
Using Bluetooth wireless technology
7
Registering connected cellular phone to take full advantage of the features available
with Bluetooth wireless technology.
Refer to Registering a connected cellular phone on
page 55.
Touch and hold for more
than two seconds to terminate the Bluetooth wireless
connection.
13
Bluetooth audio operations
When you connect a Bluetooth adapter (e.g.
CD-BTB200)(sold separately) to AVHP4300DVD, you can control Bluetooth audio.
Important
! Depending on the Bluetooth audio player connected to this unit, the available operations
will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on
your audio player.
— AVRCP profile (Audio/Video Remote Control Profile): You can perform playback,
pause playback, select songs, etc.
! Since there are a number of Bluetooth audio
players available on the market, available operations will vary extensively. When operating
your player with this unit, refer to the instruction manual that came with your Bluetooth
audio player as well as this manual.
Downloaded from Caradio-Manual.com Manuals
En
33
Section
13
Using Bluetooth wireless technology
! Information related to a song (such as the
elapsed playing time, song title, song index,
etc.) cannot be displayed on this unit.
! As the signal from your cellular phone may
cause noise, avoid using it when you are listening to songs on your Bluetooth audio
player.
! When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the Bluetooth audio player connected to this unit is
muted.
! When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
! Playback continues even if you switch from
your Bluetooth audio player to another source
while listening to a song.
! Touch panel keys
Switching between Bluetooth telephone and Bluetooth audio.
Skipping back or forward to another track when Auto is set for
the auto/manual setting.
Performing fast forward or rewind
when Manual is set for the auto/
manual setting.
F1
Pausing a song.
Touch and hold for more than two
seconds to activate connection
mode on this unit and establish a
Bluetooth wireless connection
from your player.
Refer to Connecting a Bluetooth
audio player on page 55.
F2
Playback starts.
Touch and hold for more than two
seconds to terminate the Bluetooth wireless connection.
Setting the action for c and d
icons.
Auto
Switching the equalizer curves.
Refer to Using the equalizer on
page 58.
Touch and hold for more than two
seconds to turn the auto-equalizer
on or off.
Refer to Using the auto-equalizer
on page 59.
Setting up for Bluetooth audio
Before you can use the Bluetooth audio function you must set up the unit for use with your
Bluetooth audio player. This entails establishing a Bluetooth wireless connection between
this unit and your Bluetooth audio player, and
pairing your Bluetooth audio player with this
unit.
1 Connection
First, you need to connect a Bluetooth audio to
this unit.
For detailed instructions on connecting your
Bluetooth audio to this unit via Bluetooth wireless
technology, see Connecting a Bluetooth audio
player on page 55.
from Caradio-Manual.com Manuals
34 Downloaded
En
Section
Detailed instructions
Storing and recalling stations
1 Display the preset screen.
Refer to Introduction of tuner operations on
page 17.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Refer to Introduction of HD Radioä tuner operations on page 31.
The preset screen appears in the display.
2 Touch and hold one of the preset tuning keys to store the selected frequency in
the memory.
The selected radio station frequency has been
stored in the memory.
3 Touch one of the preset tuning keys to
select the desired station.
# You can also use a and b to recall stations
assigned to preset tuning keys Preset1 to
Preset6 when the Mode All CH mode is selected.
(Function of SIRIUS tuner)
Storing the strongest stations
BSM (best stations memory) automatically
stores the six strongest stations in the order of
their signal strength.
Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using the preset tuning keys.
1 Display the preset screen.
Refer to Introduction of tuner operations on
page 17.
Refer to Introduction of HD Radioä tuner operations on page 31.
The preset screen appears in the display.
2 Touch BSM to turn BSM on.
The six strongest broadcast frequencies will
be stored under preset tuning keys in order of
their signal strength.
# To cancel the storage process, touch
Cancel.
Detailed instructions
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
! Channels are stored and recalled on a
broadcast station basis. This means that if
the broadcast station you stored has been
assigned to a different channel by SIRIUS,
you can still recall the same broadcast station (though a different channel number
may appear in the display).
14
Tuning in to strong signals
Local seek tuning lets you tune in to only
those radio stations with sufficiently strong
signals for good reception.
—
—
FM: off — —
AM: off — —
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
Tuning in to strong HD
Radio signals
Local seek tuning lets you tune in to only
those radio stations with sufficiently strong
signals for good reception.
1 Start local seek tuning
Refer to Introduction of HD Radioä tuner operations on page 31.
2
Touch On on Local to turn on.
# To turn off, touch Off.
3 Touch c or d on Level to select the desired level.
# Level1—Level2—Level3—Level4
Downloaded from Caradio-Manual.com Manuals
En
35
Section
Detailed instructions
14
# The larger the setting number, the higher the
signal level. The highest level setting allows reception of only the strongest stations, while lower
settings let you receive progressively weaker
stations.
Using iTunes tagging
This function can be operated with the following
iPod models.
— iPhone 4
— iPhone 3GS
— iPhone 3G
— iPhone
— iPod nano 5th generation
— iPod 5th generation
— iPod nano 4th generation
— iPod nano 3rd generation
— iPod touch 2nd generation
— iPod touch 1st generation
— iPod classic 2nd generation
— iPod classic
However, tag information can be stored in this
unit even while other iPod models are used.
When you want to use this function in the HD
Radio tuner source, use an HD Radio tuner
(GEX-P20HD).
The song information (tag) can be saved from
the broadcasting station to your iPod. The
songs will show up in a playlist called “Tagged
playlist” in iTunes the next time you sync your
iPod. Then you can directly buy the songs you
want from the iTunes Store.
The tagged songs and the song that you can
buy from the iTunes Store may be different.
Make sure to confirm the song before you
make the purchase.
If you cannot use this function normally, update your iPod firmware.
Storing the tag information to
this unit
1
Tune in to the broadcast station.
2 Store the tag information to this unit.
Refer to Introduction of tuner operations on
page 17.
Refer to Introduction of HD Radioä tuner operations on page 31.
You can store the information if the TAG indicator is displayed while the desired song is
being broadcast.
# While storing the tag data on this unit, TAG
flashes.
# The tag information for up to 50 songs can be
stored on this unit.
Depending on the timing of when the tag information is stored, the tag information for the song
played before or after the currently playing song
may also be stored.
# If an SD is selected as the source while tag information is being stored to this unit, the tag information will not be transferred to the iPod.
3 When completed,
indicator turns
off and indicator is displayed.
Storing the tagged information
to your iPod
1 Connect your iPod if it's not connected
to this unit.
When your iPod is connected to this unit, your
iPod starts storing the tagged information
automatically.
# While transferring the tag, you cannot select
the SD source.
2 When completed,
indicator on page
95 turns off and the tagged information is
stored on your iPod.
# Tag information cannot be transferred to the
iPod when a file on an SD device is being viewed
as a slideshow.
Switching the media file type
When playing a disc containing a mixture of various media file types, such as DivX and MP3, you
can switch between media file types to play.
from Caradio-Manual.com Manuals
36 Downloaded
En
Section
Detailed instructions
CD (audio data (CD-DA))—Music/ROM (compressed audio)—Video (DivX video files)—
Photo (JPEG picture files)
Operating the DVD menu
(Function for DVD video)
Some DVDs allow you to make a selection
from the disc contents using a menu.
Using the arrow keys
1 Display arrow keys to operate the DVD
menu.
Refer to Playing moving images on page 18.
2
Select the desired menu item.
Selecting the desired menu item.
Starting playback from the selected menu item.
Operating the DVD menu by directly touching the menu item.
# When operating the DVD menu by directly
touching the menu item, touch the icon to operate.
Returning to the normal DVD video
display.
# Ways to display the menu will differ depending on the disc.
# Depending on the contents of the DVD disc,
this function may not work properly. In such
cases, use the touch panel keys to operate the
DVD menu.
Operating this unit’s iPod
function from your iPod
You can listen to the sound from your iPod applications using your car’s speakers, when
App Mode is selected with following iPod
models.
This function is not compatible with the following iPod models.
! iPod nano 1st generation
! iPod 5th generation
APP mode is compatible with the following
iPod models.
! iPhone 4 (software version 4.1 or later)
! iPhone 3GS (software version 4.1 or later)
! iPhone 3G (software version 4.1 or later)
! iPhone (software version 3.1.3 or later)
! iPod touch 3rd generation (software version
4.0 or later)
! iPod touch 2nd generation (software version 4.0 or later)
! iPod touch 1st generation (software version
3.1.3 or later)
Detailed instructions
Audio data (CD-DA) and JPEG picture files on
DVD-R/RW/ROM cannot be played back on
this unit.
14
! While this function is in use, the iPod will
not turn off even if the ignition key is turned
off. Operate the iPod to turn off the power.
1 Switch the control mode to App Mode.
Refer to Introduction of video playback operations on page 18.
Refer to Introduction of sound playback operations on page 21.
2 Operate the connected iPod to select a
video/song and play.
Displaying arrow keys.
Downloaded from Caradio-Manual.com Manuals
En
37
Section
Detailed instructions
14
Note
The following functions are still accessible from
the unit even if the control mode is set to
App Mode.
However, the operation will depend on your applications.
! Pausing
! Fast forwarding/reversing
! Tracking up/down
! Moving to a chapter up/down
Random play (shuffle)
iPod-videos/songs can be played back in random order.
! Songs – Play back videos/songs in the selected list in random order.
! Albums – Play back videos/songs from a
randomly selected album in order.
! Folder – Play back songs/tracks in the selected folder in random order.
! Disc – Play back songs/tracks in the selected disc in random order.
! On – Play back files in random order within
the repeat range, Folder and Disc.
! Off – Cancel random play.
Playing all songs in random
order (shuffle all)
(Function for iPod)
This method plays all songs on the iPod
randomly.
Repeating playback
!
!
!
!
!
!
Disc – Play through the current disc
Chapter – Repeat the current chapter
Title – Repeat the current title
Track – Repeat the current track
File – Repeat the current file
Folder – Repeat the current folder
! One – Repeat just the current video/song/
track
! All – Repeat all videos/songs in the selected list on the iPod
Repeat all files
! This function cannot be operated during
Video CD playback featuring PBC (playback
control).
! If you perform chapter search, fast forward/
reverse, frame-by-frame playback or slow
motion playback, the repeat play will stop.
! When playing discs with compressed audio
and audio data (CD-DA), playback is repeated within the type of data currently
playing even if Disc is selected.
! If you select another folder during repeat
play, the repeat play range changes to Disc.
If you select USB or SD source, the repeat
play range changes to All.
! If you perform track search or fast forward/
reverse during File, the repeat play range
changes to Folder.
! If you perform title/chapter search or fast
forward/reverse during Chapter, the repeat
play range changes to OFF.
! If you perform track search or fast forward/
reverse during Track, the repeat play range
changes to Disc.
! When Folder is selected, it is not possible
to play back a subfolder of that folder.
Playing videos from your iPod
(Function for iPod)
Videos can be played on this unit if an iPod
with video capabilities is connected.
! This unit can play back “Movies”, “Music videos”, “Video Podcast” and “TV show”
which are downloaded from the iTunes
store.
! Before you display the video screen, be
sure to change the video setting on the
iPod so that the iPod can output the video
to an external device.
from Caradio-Manual.com Manuals
38 Downloaded
En
Section
Detailed instructions
1 Display the iPod menus.
Refer to Playing moving images on page 18.
Switch to iPod video mode.
Video
Switching to iPod video mode.
! Audiobooks (audiobooks)
3 Touch the title of the list that you want
to play.
Repeat this operation until you find the desired video/music.
4
3
Start playback of the selected list.
Play the video from the iPod.
# If you want to switch to iPod music mode,
touch the icon.
Music
Switching to iPod music mode.
Starting playback of the selected list.
Detailed instructions
2
14
Searching the list by alphabet
(Function for iPod)
Browsing for a video/music
on the iPod
(Function for iPod)
To make operating and searching easy, operations to control an iPod with this unit are designed to be as similar to the iPod as possible.
Searching for a video/music by
category
1 Display the iPod menus.
Refer to Playing moving images on page 18.
Refer to Playing audio on page 21.
2 Touch one of the categories in which
you want to search for a video/music.
!
!
!
!
!
!
!
!
!
!
!
!
Video Playlists (video playlists)
Movies (movies)
Music Videos (music videos)
Video Podcasts (video podcasts)
TV Shows (TV shows)
Playlists (playlists)
Artists (artists)
Albums (albums)
Songs (songs)
Podcasts (podcasts)
Genres (genres)
Composers (composers)
1 Select a category.
Refer to Searching for a video/music by category on this page.
2
Switch to alphabet search mode.
Switching to alphabet search mode.
Alphabet search mode is displayed.
3 Touch the first letter of the title of the
video/song you are looking for.
While searching, touch panel key operation is
not available.
# To refine the search with a different letter,
touch Cancel.
4 Touch the title of the list that you want
to play.
Repeat this operation until you find the desired song/video.
5
Downloaded from Caradio-Manual.com Manuals
Start playback of the selected list.
Starting playback of the selected list.
En
39
Section
14
Detailed instructions
Resume playback (Bookmark)
(Function for DVD video)
By using the Bookmark function, you can resume playback from a selected scene the next
time the disc is loaded.
The selected scene will be bookmarked so that
playback resumes from that point next time.
! To clear the bookmark on a disc, touch and
hold the button during playback.
! The oldest bookmark is replaced by the
new one.
! This function cannot be operated during
some DVD videos or Video CD playback
featuring PBC (playback control).
1 Start the search function.
Refer to Playing moving images on page 18.
2 Touch the desired search option (e.g.,
Chapter).
3 Touch 0 to 9 to input the desired number.
# To cancel the entered numbers, touch C.
4
Frame-by-frame playback
Registering the numbers and starting playback.
(Function for DVD video/video CD/DivX file)
Note
Images during frame-by-frame playback may be
unclear for some discs.
Start playback from the selected part.
Note
With discs featuring a menu, you can also use
the DVD menu to make your selection.
Refer to Playing moving images on page 18.
Slow motion playback
Notes
! There is no sound during slow motion playback.
! Images during slow motion playback may be
unclear for some discs.
! Reverse slow motion playback is not
available.
Changing audio language
during playback (Multi-audio)
Searching for the part you
want to play
Notes
! With some DVDs, switching between languages/audio systems may only be possible
using a menu display.
! You can also switch between languages/audio
systems using Video Setup menu. For details,
refer to Setting the audio language on page 61.
! Depending on the setting, the video may not
be played back with the audio system used to
record the DVD.
! You will return to normal playback if you
change the Audio during fast forward/fast rewind, pause or slow motion playback.
You can use the search function to find the
part you want to play.
For DVD videos, you can select Title (title),
Chapter (chapter) or 10key (numeric keypad).
For video CDs, you can select Track(track) or
10key(numeric keypad).
! Chapter search is not available when disc
playback is stopped.
With DVDs/DivX files that provides audio playback in different languages and different
audio systems (Dolby Digital, DTS, etc.), you
can switch between languages/audio systems
during playback.
from Caradio-Manual.com Manuals
40 Downloaded
En
Section
Detailed instructions
With DVDs/DivX files featuring multi-subtitle
recordings, you can switch between subtitle
languages during playback.
Notes
! With some DVDs, switching between subtitle
languages may only be possible using a menu
display.
! You can also switch between subtitle languages using Video Setup menu. For details,
refer to Setting the subtitle language on page
61.
! You will return to normal playback if you
change the Subtitle during fast forward/fast
rewind, pause or slow motion playback.
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during playback.
! During playback of a scene shot from multiple angles, the angle icon is displayed.
Use the Video Setup menu to turn the
angle icon display on or off. For details,
refer to Setting the multi-angle DVD display
on page 61.
Note
You will return to normal playback if you change
the viewing angle during fast forward/fast rewind,
pause or slow motion playback.
Return to the specified scene
(Function for DVD video)
This function cannot be used if a specified
scene has not been preprogrammed on the
DVD disc.
Selecting audio output
When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing video CDs, you can switch between stereo and monaural audio output.
! This function is not available when disc
playback is stopped.
!
!
!
!
L+R – left and right
Left – left
Right – right
Mix – mixing left and right
Detailed instructions
Changing the subtitle
language during playback
(Multi-subtitle)
14
You may not be able to select or use this function depending on the disc and the playback
location.
PBC playback
(Function for Video CDs)
During playback of Video CDs featuring PBC
(Playback Control), PBC ON is displayed.
1 Start the search function.
Refer to Playing moving images on page 18.
2 Touch 10key to display the numeric
keypad.
3 Touch 0 to 9 corresponding to a menu
number.
4
Start playback from the selected part.
Registering the numbers and starting playback.
Notes
! You can display the menu by touching Return
during PBC playback. For details, refer to the
instructions provided with the disc.
! PBC playback of a Video CD cannot be canceled.
! During playback of Video CDs featuring PBC
(Playback Control), you cannot select the repeat play range or use the search function.
Downloaded from Caradio-Manual.com Manuals
En
41
Section
Detailed instructions
14
Selecting tracks from the
track title list
You can select tracks to playback using the
track title list which is a list of the tracks recorded on a disc.
1 Display the track title list.
Refer to Playing audio on page 21.
2 Touch your favorite track title.
Playback begins.
Selecting files from the file
name list
(Function for compressed audio/DivX/JPEG)
File name list is a list of file names (or folder
names) from which you can select a file (or
folder) to play back.
1 Display the file (or folder) name list.
Refer to Playing audio on page 21.
Refer to Introduction of still image playback operations on page 25.
2 Touch your favorite file (or folder)
name.
# When you have selected a folder, a list of the
names of the files (or the folders) in it can be
viewed. Repeat this operation to select the desired file name.
# If folder 01 (ROOT) contains no files, playback
commences with folder 02.
3
Changing audiobook speed
(Function for iPod)
!
– Playback at a speed faster than
normal
– Playback at normal speed
!
!
– Playback at a speed slower than normal
Displaying lists related to
the currently playing song
(Link Search)
(Function for iPod)
1 Start Link Search.
Refer to Introduction of sound playback operations on page 21.
2 Touch one of the categories in which
you want to play.
! Artist – Displays an album list of the artist
currently being played.
! Album – Displays a song list from the
album currently being played.
! Genre – Displays an album list from the
genre currently being played.
# To cancel searching, touch Cancel.
3 Touch the title of the list that you want
to play.
4
Start playback of the selected list.
Start playback of the selected list.
Starting playback of the selected list.
Starting playback of the selected list.
Playing DivXâ VOD content
Using advanced sound
retriever
Automatically enhances compressed audio
and restores rich sound.
Off —
!
—
is more effective than
Some DivX VOD (video on demand) content
may only be playable a fixed number of times.
When you load a disc containing this type of
content, the remaining number of times it can
be played is shown on-screen. You can then
decide whether or not to play the disc.
.
from Caradio-Manual.com Manuals
42 Downloaded
En
Section
Detailed instructions
Important
! In order to play DivX VOD contents on this
unit, you first need to register the unit with
your DivX VOD contents provider. For details
on your registration code, refer to Displaying
the DivXâ VOD registration code on page 64.
! DivX VOD content is protected by a DRM (Digital Rights Management) system. This restricts playback of content to specific,
registered devices.
% If a message is displayed after loading
a disc containing DivX VOD content, touch
Play.
Playback of the DivX VOD content will start.
3 When Do you save this image? is displayed, touch Yes.
While storing the image to this unit, Saving
the image Don’t switch off the battery. is
displayed. When the process is finished,
Image saved is displayed.
# To cancel the storage process, touch No.
Changing the wide screen
mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 picture.
1 Display the screen mode.
Refer to Introduction of video playback operations on page 18.
Refer to Introduction of still image playback operations on page 25.
Refer to Introduction of still image playback as
a slideshow operations on page 26.
2
Touch the desired wide mode setting.
# To skip to the next file, touch Next Play.
# If you do not want to play the DivX VOD content, touch Stop.
Full (full screen)
The 4:3 picture is enlarged in the horizontal direction only, giving you a 4:3 TV picture (normal picture) without any omissions.
Capture an image in JPEG files
Just (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
toward the edges of the screen, enabling you to
enjoy a 4:3 picture without sensing any disparity
even when viewing on a wide screen.
You can capture image data and use it as wallpaper. Images can be stored and recalled easily in this unit.
! Only one image can be stored on this unit.
Old image is overwritten with the new one.
Detailed instructions
! If there is no limit to the number of times
the DivX VOD content can be viewed, then
you may load the disc into your player and
play the content as often as you like, and
no message will be displayed.
! You can confirm the number of times that
the content can be played by checking the
number displayed after Remaining Views:.
14
1 Pause the slideshow when the desired
image is displayed.
Refer to Introduction of still image playback operations on page 25.
Refer to Introduction of still image playback as
a slideshow operations on page 26.
Cinema (cinema)
The picture is enlarged by the same proportion as
Full or Zoom in the horizontal direction and by
an intermediate proportion between Full and
Zoom in the vertical direction; ideal for a cinemasized picture (wide screen picture) where captions lie outside the picture.
2 Capture the image.
Refer to Introduction of still image playback operations on page 25.
Refer to Introduction of still image playback as
a slideshow operations on page 26.
Zoom (zoom)
The 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cinema
sized picture (wide screen picture).
Downloaded from Caradio-Manual.com Manuals
En
43
Section
Detailed instructions
14
Normal (normal)
The 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
Notes
! You cannot operate this function while driving.
! Different settings can be stored for each video
source.
! When a video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
! Remember that using the wide mode feature
of this system for commercial or public viewing purposes may constitute an infringement
on the author’s rights protected by the Copyright Law.
! The video image will appear coarser when
viewed in Cinema or Zoom mode.
Storing song information
(bookmarks)
With the Bookmark function, you can select
an artist or a song to add to Bookmarks.
1 Switch to song information (bookmark)
storing mode.
Refer to Introduction of Pandora operations on
page 23.
The song information (bookmark) storing
mode is displayed.
2
Storing or canceling a bookmark.
Adding information for the song currently playing to Bookmarks.
Adding artist information for the
song currently playing to Bookmarks.
Selecting and playing the
Quick Mix/station list
Canceling a bookmark.
Touch the list for your Pandora stations to select one of them to play.
1 Display the Quick Mix/station list.
Refer to Introduction of Pandora operations on
page 23.
2
Change the sort order.
You can sort the items in the list alphabetically.
You can sort the items in the list in
order of the dates on which the
items were created.
3
Select QuickMix or the desired station.
You can play only one song at a time
from a shuffled mix of several stations.
Switching the XM/SIRIUS
channel selection mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
Mode All CH (channel number select setting)
—Mode Category (channel category select
setting)
Selecting a SIRIUS channel from
a channel category
Channels are organized into various program
categories, e.g. Rock, Classic, Jazz while listening to a SIRIUS station. You can specify
channels by selecting the desired category.
from Caradio-Manual.com Manuals
44 Downloaded
En
Section
Detailed instructions
2 Touch a or b to select the desired channel category.
3 Touch c or d on the buttons to select
the desired channel in the selected channel
category.
2
Switching to direct input display.
3 Touch 0 to 9 to input the desired channel number.
# To cancel the input numbers, touch C.
4 Select the XM/SIRIUS channel of the entered number.
The XM/SIRIUS channel of the entered number is selected.
Selecting the XM/SIRIUS channel of
the entered number.
Selecting a channel from the
XM channel list display
The list content can be switched so you can
search for the track you want to listen to not
only by the channel name but also by the artist
name or song title.
! This function is available for GEX-P920XM.
! The channel list shows all the channels
during Mode All CH mode, and the channels included in the selected category during Mode Category mode.
1 Display the preset channel list.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
2
Switch the channel list mode.
Switching the channel list mode to
the channel name or the artist
name/song title.
3 Touch the desired channel that you
want to listen to.
Selecting an XM/SIRIUS
channel directly
You can select an XM/SIRIUS channel directly
by entering the desired channel number.
1 Display the preset channel list.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Switch to direct input display.
Detailed instructions
1 Select channel category selection
mode.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Mode All CH (channel number select setting)
—Mode Category (channel category select
setting)
14
Using the MyMix function
The MyMix function allows you to make a
MyMix song playlist. When a song in the
MyMix playlist is being broadcast on a station
other than the one you are listening to, you
will be alerted, and you can tune in to the
other station to listen to that song.
! This function is available for GEX-P920XM/
SIRIUS tuner.
! The track itself is NOT downloaded. Only
the song title and artist name are stored.
Making the MyMix playlist
You can add a song that is being broadcast to
the MyMix playlist. When it is added, the song
title and its artist name are stored to this unit.
The MyMix function will start when you listen
to a song that matches a song title and its artist name in the MyMix playlist.
% Store the song title and artist name.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
The song title and artist name of the song you
are listening to are stored, and a confirmation
message appears.
Downloaded from Caradio-Manual.com Manuals
En
45
Section
14
Detailed instructions
# To delete a song from the MyMix playlist, refer
to Deleting a song from the MyMix playlist for XM
tuner on the next page and Deleting a song from
the MyMix playlist for SIRIUS tuner on the next
page.
# (XM tuner)
The song title and artist name of up to 12 tracks
can be stored. Old tracks will be overwritten
when saving more than 12 tracks.
# (SIRIUS tuner)
The song title and artist name of up to 10 tracks
can be stored.
# You cannot store the song title or the artist
name when “– – – – – – – –” is displayed for the
title information.
# You cannot store song titles or artist names
from channel 000.
# Stored titles may not be displayed correctly.
When a song in the MyMix
playlist is broadcast
(XM tuner)
As soon as a song in the MyMix playlist starts
being broadcast on a different station, a message is displayed. Touch Yes to switch to that
station, and you can listen to that song.
(SIRIUS tuner)
As soon as a stored song starts being broadcast on a different station, a song alert is displayed.
Turning the MyMix function on
or off
You can turn the MyMix function off and stop
the alerts for all the songs in the MyMix playlist. To restart, turn this function on.
The MyMix function is on as the default setting.
% Turn the MyMix function on or off.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Setting up a song alert
You can set up an alert (on or off) for each
song in the MyMix playlist. First, display the
MyMix playlist and then change each alert setting. Set the alert to on to receive an alert
when the song is broadcast, or set it to off to
stop the alert for that song.
1 Switch to memo edit mode.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
The MyMix playlist is displayed.
2 Select the song title for which you
want to turn the alert on or off.
(XM tuner)
The check mark is removed, and the alert for
that song is off.
(SIRIUS tuner)
Switching to the other station to listen to that track.
Selecting the song title for which
you want to turn the alert off.
Not tuning in to the other station.
! (XM tuner)
If you would rather not to tune in to the
other station, touch No.
! If an alert for a song in the MyMix playlist is
set to off, no alert will be provided even
when the song is broadcast. Refer to Setting up a song alert on this page.
! If the stored title and the title of the song
being broadcast differ, no alert will be provided even if they are the same song.
3 Turn the alert on or off.
(SIRIUS tuner)
from Caradio-Manual.com Manuals
46 Downloaded
En
Turning the alert on or off.
Section
Detailed instructions
Deleting a song from the
MyMix playlist for XM tuner
1 Switch to memo edit mode.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
The MyMix playlist is displayed.
2
Delete the song title.
Deleting the song title.
Deleting all the songs in the MyMix
playlist.
That song will be deleted from the MyMix playlist.
A message to confirm deletion will appear.
3
4 Touch Yes.
That song will be deleted from the MyMix playlist.
# To cancel deletion, touch No.
Using the Game Alert function
This system can alert you when games involving your favorite teams are about to start. To
use this function you need to set up a game
alert for the teams in advance.
! This function is available for SIR-PNR2/SIRPNR2C.
Detailed instructions
You can delete each song in the MyMix playlist.
14
Selecting teams for Game Alert
1 Start Game Alert setup.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
2
Select a desired league in League
Touch Yes.
# To cancel deletion, touch No.
Switching the league name.
Deleting a song from the
MyMix playlist for SIRIUS tuner
You can delete each song in the MyMix playlist.
3
1 Switch to memo edit mode.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Select a desired team in Team.
Switching the team name.
2 Select the song title that you want to
delete.
4
Selecting the song title that you
want to delete.
3
Delete the song title.
Deleting the song title.
Turn the alert on or off.
Turning the alert on or off.
The game alert function is activated for that
team.
# When you have already selected 12 teams,
FULL is displayed and additional teams cannot
be selected. In this case, first delete a selected
team and then try again.
A message to confirm deletion will appear.
Downloaded from Caradio-Manual.com Manuals
En
47
Section
14
Detailed instructions
5 Repeat these steps to select other
teams.
Up to 12 teams can be selected.
# If you have not selected any teams, NOT SET
is displayed.
# When games involving your favorite teams are
not currently playing, NO GAME is displayed.
Switching the Game Alert on or off
Once you select the teams, you need to turn
the Game Alert function on.
The Game Alert function is on at the default
setting.
When a game of a selected
team starts
When a game of the selected team is about to
start (or is currently playing) on a different station, a game alert is displayed.
Switching to the other station to listen to the game.
Not tuning in to the other station.
Displaying game information
Displaying the Radio ID
Channel number selection setting
If you select CH000, the ID code is displayed.
% Select CH000.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Switching the SIRIUS display
! Actions will differ depending on the connected SIRIUS tuner.
% Touch SIRIUS information to switch the
SIRIUS display.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Channel number—Channel name—Category
name—Artist name—Song title/Title name—
Composer name—Play time
If any games of the selected teams are currently playing, you can display information on
the games and tune in to the broadcast channel.
Note
Play time is displayed during the Instant Replay
mode.
1 Display the game information for the
selected team.
Refer to Introduction of XM/SIRIUS tuner operations on page 29.
Using the Instant Replay
function
2 Touch c or d to select a game.
The game is displayed, followed by more detailed game information.
! The game score will be updated automatically.
3 Switch to the other station to listen to
the game.
The following functions can be operated in Instant Replay mode.
! To use this function, a Pioneer SIRIUS bus
interface (e.g. CD-SB10) is required.
! To use this function, a SIRIUS plug-andplay unit with an Instant Replay Function is
required.
! For details, refer to the SIRIUS plug-andplay unit’s manuals.
Switching to the other station to listen to the game.
from Caradio-Manual.com Manuals
48 Downloaded
En
Section
Detailed instructions
Exiting from Instant Replay mode.
% Select a track
Press c or d (TRACK/SEEK).
% Fast forward or reverse
Press and hold c or d (TRACK/SEEK).
% Pause and play
Playing and pausing.
Switching the seek mode
! When SEEK MODE is set to Seek HD, if you
switch BLENDING from D/A Auto to Analog,
SEEK MODE is changed to Seek All.
! When BLENDING is set to Analog, if you
switch SEEK MODE from Seek All to
Seek HD, BLENDING is changed to
D/A Auto.
Calling a number in the
phone book
(Function of AVH-P3300BT)
The phone book in your cellular phone will be
transferred automatically when the phone is
connected to this unit.
After finding the number you want to call in
the phone book, you can select the entry and
make the call.
1 Switch to phone book mode.
Refer to Introduction of Bluetooth telephone operations on page 27.
The phone book display appears.
There are two seek tuning settings, one is
Seek HD (Digital broadcasting stations seek)
and the other is Seek All (normal seek).
2 Select the phone number list.
The detailed phone number list of the selected
entry is displayed.
Seek All—Seek HD
3
Switching the reception mode
If the reception for a digital broadcast becomes poor, this unit automatically switches
to the analog broadcast of the same frequency. If this function is set to D/A Auto, the
tuner switches between digital broadcast and
analog broadcast automatically. If this function is set to Analog, the tuner will only receive analog broadcasts.
D/A Auto—Analog
Note
If SEEK MODE is set to Seek HD and BLENDING
is set to Analog, the tuner cannot receive broadcasts. In this case, the seek mode or reception
mode is changed automatically as follows:
Detailed instructions
% To exit from Instant Replay mode, select another source or touch the following
icon.
14
Select the phone number.
# If you want to store the phone number, touch
and hold the list.
4 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
5 End the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
Note
Depending on the cellular phone, the phone book
may not be transferred automatically. In this
case, operate your cellular phone to transfer the
phone book. The visibility of this unit should be
on. Refer to Switching visible unit on page 54.
Downloaded from Caradio-Manual.com Manuals
En
49
Section
14
Detailed instructions
Selecting a number by
alphabet search mode
Using the missed, received
and dialed call lists
(Function of AVH-P3300BT)
If a lot of numbers are registered in the phone
book, you can search for the phone number by
alphabet search mode.
(Function of AVH-P3300BT)
The 80 most recent calls dialed, received, and
missed are stored in the memory. You can
browse them and call numbers from these
lists.
1 Switch to phone book mode.
Refer to Introduction of Bluetooth telephone operations on page 27.
The phone book display appears.
2 Touch ABC to switch to alphabet search
mode.
1 Switch to the call history list.
Refer to Introduction of Bluetooth telephone operations on page 27.
2 Select Missed Calls, Dialled Calls or
Received Calls.
3 Touch the first letter of the entry you
are looking for.
The Phone Book entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is
selected) will be displayed.
Displaying the received call list.
Displaying the dialed call list.
# If you want to change the character to Russian, touch the icon. To return to English, touch
the icon again.
Changing the character to Russian.
# The order of the first name and last name may
be different from that of the cellular phone.
4 Touch the list to display the phone
number list of the selected entry.
# If several phone numbers are included in an
entry, select one by touching the list.
# If you want to switch to the call history list,
touch the icon.
Switching to the call history list.
5 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
6 End the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
Displaying the missed call list.
3 Touch the list number to select a phone
number.
Name and phone number are displayed in the
detailed list.
# If you want to store the phone number, touch
and hold the list.
4 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
5 End the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
Using the missed, received
and dialed call lists on the
optional Bluetooth adapter
(Function of AVH-P4300DVD)
The 80 most recent calls dialed, received, and
missed are stored in the memory. You can
browse them and call numbers from these
lists.
from Caradio-Manual.com Manuals
50 Downloaded
En
Section
Detailed instructions
2 Touch a phone number or name (if entered) you want to call.
3 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 32.
Adjusting the other party’s
listening volume
(Function of AVH-P3300BT)
To maintain the good sound quality, this unit
can adjust the other party’s listening volume.
If the volume is not loud enough for the other
party, use this function.
4 End the call.
Refer to Introduction of Bluetooth telephone operations on page 32.
% Select Far-End VOL.
Refer to Introduction of Bluetooth telephone operations on page 27.
1—2—3
Setting automatic answering
# This function can be performed even while
talking on the phone.
# Settings can be stored for each device.
If this function is on, this unit automatically
answers all incoming calls.
% Turn automatic answering on or off.
(AVH-P4300DVD)
Refer to Introduction of Bluetooth telephone operations on page 32.
(AVH-P3300BT)
Refer to Introduction of Bluetooth telephone operations on page 27.
Detailed instructions
1 Switch to the call history list.
Refer to Introduction of Bluetooth telephone operations on page 32.
14
Switching the ring tone
You can select whether or not to use this
unit’s ring tone. If this function is set to on,
the ring tone for this unit will sound.
1 Connect your cellular phone to this
unit.
2 Turn ring tone on or off.
(AVH-P4300DVD)
Refer to Introduction of Bluetooth telephone operations on page 32.
(AVH-P3300BT)
Refer to Introduction of Bluetooth telephone operations on page 27.
Using the preset dial lists
(Function of AVH-P3300BT)
You can easily store up to six phone numbers
as presets.
1 Display the preset screen.
Refer to Introduction of Bluetooth telephone operations on page 27.
Downloaded from Caradio-Manual.com Manuals
En
51
Section
14
Detailed instructions
2 Touch one of preset dial keys to select
the desired phone number.
# If you want to delete a preset phone number,
touch and hold the preset dial key.
Note
Entering phone number mode cannot be operated unless a Bluetooth telephone is connected
to this unit.
3 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
Setting the private mode
4 End the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
Making a call by entering
phone number
(Function of AVH-P3300BT)
1
2
3
4
5
6
7
8
9
*
0
Pairing from this unit
(Function of AVH-P3300BT)
Wed 28 may
12:45 PM
(Function of AVH-P3300BT)
During a conversation, you can switch to private mode (talk directly on your cellular
phone).
Refer to Introduction of Bluetooth telephone operations on page 27.
1
ABCDEHGHI 01
Connection
012345678901
+
01: Phone1
02: Phone2
03: Phone3
04: Phone4
05: Phone5
Off
#
C
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this operation.
1 Switch to the entering phone number
mode.
Refer to Introduction of Bluetooth telephone operations on page 27.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
2
Touch Connection to select a device.
3
Start to search.
2 Touch the number icons to input the
numbers.
Starting to search.
# Up to 24 digits can be entered.
3 Make the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
4 End the call.
Refer to Introduction of Bluetooth telephone operations on page 27.
While searching,
is displayed and when
available devices are found, the device names
or Bluetooth device addresses (if names cannot be obtained) are displayed.
# If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.
from Caradio-Manual.com Manuals
52 Downloaded
En
Section
Detailed instructions
# To cancel searching, touch Stop.
# If five devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
# If no device can be found, Not Found is displayed. In such cases, check the status of the
Bluetooth device and search again.
4 Touch a device name to select the device you want to connect to.
While connecting, Pairing is displayed. If the
connection is established, Paired is displayed.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
# When establishing connection, the icon is displayed.
Touch the icon to disconnect the device.
Disconnecting a Bluetooth device.
# If you want to delete a paired Bluetooth telephone, display Delete OK?. Touch Yes to delete
the device.
Deleting a paired device.
# Never turn the unit off while the paired Bluetooth telephone is being deleted.
Using a Bluetooth device to
pair
Bluetooth device, you can use this function to
establish a connection.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
2 Touch Special Device to select the special device.
# Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
Detailed instructions
Switching between the device
names and Bluetooth device addresses.
14
3 Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
# If five devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to this page.
4 Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a connection.
While connecting, Pair your phone is displayed. If the connection is established,
Paired is displayed.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next
page.
Connecting to a Bluetooth
device automatically
(Function of AVH-P3300BT)
(Function of AVH-P3300BT)
If you cannot open the connection between
your Bluetooth device and this unit from your
Downloaded from Caradio-Manual.com Manuals
En
53
Section
Detailed instructions
14
If this function is set to on, a connection between your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
2 Touch Auto Connect to turn automatic
connection on.
If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to
this unit will automatically be established.
# To turn automatic connection off, touch
Auto Connect again.
3 Turn your vehicle’s ACC switch off and
on.
Switching visible unit
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
2 Touch Device Information to display device information.
The Bluetooth device address is displayed.
Entering PIN code for
Bluetooth wireless connection
(Function of AVH-P3300BT)
To connect your Bluetooth device to this unit
via Bluetooth wireless technology, you need to
enter a PIN code on your Bluetooth device to
verify the connection. The default code is
0000, but you can change it with this function.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
(Function of AVH-P3300BT)
This function sets whether or not to make this
unit visible to the other device.
Initially, this function is set to on.
2 Touch PIN Code Input to select
PIN code input.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone operations on page 27.
4 After inputting PIN code (up to 8 digits), store in this unit.
2
3
Touch 1 to 0 to input pin code.
Storing the PIN code in this unit.
Touch Visibility to select visibility off.
! To turn visibility on, touch Visibility
again.
Displaying Bluetooth
Device address
(Function of AVH-P3300BT)
This unit displays its Bluetooth device address.
Using a cellular phone to
initiate a connection
(Function of AVH-P4300DVD)
A Bluetooth wireless connection can be established from your phone by putting the unit into
initiating a connection mode.
from Caradio-Manual.com Manuals
54 Downloaded
En
Section
Detailed instructions
1 Put the unit in initiating a connection
mode.
Refer to Introduction of Bluetooth telephone operations on page 32.
2 Use a cellular phone to connect to this
unit.
# Operation varies depending on the type of cellular phone.
# You may need to enter the link code on your
cellular phone to complete the connection.
Registering a connected
cellular phone
(Function of AVH-P4300DVD)
You can register a phone that is temporarily
connected to this unit in order to take full advantage of the features available with Bluetooth wireless technology. Only one cellular
phone can be registered.
1 Start registering a connected cellular
phone.
Refer to Introduction of Bluetooth telephone operations on page 32.
2 Use cellular phone to register to this
unit.
If registration is successful, the device name
of the connected phone is displayed in the selected assignment.
# If the assignment is already taken, the device
name will be displayed. To replace an assignment
with a new phone, first delete the current assignment.
# If registration failed, the device name of the
connected phone will not be displayed in the selected assignment. In such cases, return to step
1 and try again.
Voice recognition
(Function of AVH-P4300DVD)
If your cellular phone features voice recognition technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1 Start voice recognition.
Refer to Introduction of Bluetooth telephone operations on page 32.
2
Detailed instructions
You may need to refer to the operation manual
that came with your phone if you are unsure
how to initiate a connection from your phone.
14
Say the name of your contact aloud.
Connecting a Bluetooth
audio player
(Function of AVH-P4300DVD)
A Bluetooth wireless connection can be established by putting the unit into initiating a connection mode.
% Put the unit in initiating a connection
mode.
Refer to Bluetooth audio operations on page
33.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Connecting to a Bluetooth
device automatically
(Function of AVH-P4300DVD)
If this function is set to on, a connection between your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
Downloaded from Caradio-Manual.com Manuals
En
55
Section
14
Detailed instructions
1 Touch Auto Connect to turn automatic
connection on.
Refer to Introduction of Bluetooth telephone operations on page 32.
If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to
this unit will automatically be established.
# To turn automatic connection off, touch
Auto Connect again.
2 Turn your vehicle’s ACC switch off and
on.
Displaying Bluetooth
Device address
(Function of AVH-P4300DVD)
This unit displays its Bluetooth Device address.
% Touch Device Information to display device information.
Refer to Introduction of Bluetooth telephone operations on page 32.
The Bluetooth Device address is displayed.
from Caradio-Manual.com Manuals
56 Downloaded
En
Section
Menu operations
15
Introduction of menu
operations
! You cannot display the Audio function menu
when the mute function is on or a JPEG file is
playing.
21
Menu operations
Audio
Fader/Balance
F/R 0 L/R 0
Graphic EQ
Super Bass
Auto EQ
On
Sonic Center Control
L/R0
Loudness
High
Subwoofer
Off
34 5
1 Display menus.
Refer to Common operations for menu settings/lists on page 15.
2 Touch any of the following touch panel
keys to select the menu to be adjusted.
! Touch panel keys
1
Video Setup Menu
Refer to Setting up the DVD
player on page 61.
2
Audio function menu
Refer to Audio Adjustments on
the next page.
3
System menu
Refer to System settings on
page 65.
4
Entertainment menu
Refer to Entertainment settings
on page 70.
5
Custom menu
You can choose menus within
each menu (Audio function
menu, etc.) and register them
to this custom menu.
Refer to Customizing menus
on page 71.
Notes
! You can display the Video Setup menu when
a Disc, USB or SD source is selected.
! If you start the Video Setup menu, playback
is stopped.
Downloaded from Caradio-Manual.com Manuals
En
57
Section
15
Menu operations
Audio Adjustments
Display
Equalizer curve
Vocal
Vocal
Custom1
Custom 1
Custom2
Custom 2
Using fader/balance adjustment
Flat
Flat
You can change the fader/balance setting to
provide an ideal listening environment for all
of the occupied seats.
Super Bass
Super bass
Note
When selecting FM as the source, you cannot
switch to Source Level Adjuster.
2 Touch Fader/Balance on the audio function menu.
! The equalizer curves for Custom1 and
Custom2 can be adjusted.
! You cannot select Custom1 and Custom2
when using the auto-equalizer.
! When Flat, no changes are made to the
sound. You can check the effects of the
equalizer curves by switching alternatively
between Flat and another equalizer curve.
3 Touch a or b to adjust the front/rear
speaker balance.
Range: Front:15 to Rear:15
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
# Select F/R: 0 L/R: 0 when only using two
speakers.
# The front/rear speaker balance cannot be adjusted when the rear output setting is
Subwoofer. Refer to Setting the rear output and
subwoofer controller on page 65.
4 Touch c or d to adjust the left/right
speaker balance.
Range: Left:15 to Right:15
2 Touch Graphic EQ on the audio function
menu.
# You can select Graphic EQ when Auto EQ
function is off.
3 Touch c or d to select the desired item.
Powerful—Natural—Vocal—Custom1—
Custom2—Flat—Super Bass
Adjusting the 8-band graphic equalizer
Using the equalizer
You can adjust the equalization to match the
car’s interior acoustic characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display
Equalizer curve
Powerful
Powerful
Natural
Natural
You can adjust the level of each band for the
equalizer curves.
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve other than Custom2 is selected, the equalizer curve settings will be
stored in Custom1.
! A Custom2 curve that is common for all
sources can be created. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.
1 Display the audio function menu.
Refer to Introduction of menu operations on
the previous page.
from Caradio-Manual.com Manuals
58 Downloaded
En
Section
Menu operations
2 Touch Graphic EQ on the audio function
menu.
4
Touch the Equalizer band to adjust.
5 Touch a or b to adjust the level of the
equalizer band.
Range: +12dB to –12dB
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-frequency ranges at low volume.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Loudness on the audio function
menu.
# You can then select another band and adjust
the level.
3 Touch c or d to select a desired level.
Off (off)—Low (low)—Mid (mid)—High
(high)
Using the auto-equalizer
Using subwoofer output
The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on page 67).
You can turn the auto-equalizer on or off.
If you connect an optional microphone to this
unit, you can use this function.
This unit is equipped with a subwoofer output
which can be turned on or off.
! The cut-off frequency and output level can
be adjusted when the subwoofer output is
on.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Auto EQ to turn the auto-equalizer on or off.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Subwoofer on the audio function
menu.
# You cannot use this function if auto EQ has
not been carried out.
3 Touch On or Off next to Subwoofer to
turn the subwoofer output on or off.
Using sonic center control
4 Touch Normal or Reverse next to Phase
to select the phase of subwoofer output.
Sound that is suited for the listening position
can easily be created with this function.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Sonic Center Control on the
audio function menu.
3 Touch c or d to select a listening position.
Range: Left:7 to Right:7
Menu operations
3 Touch c or d to select the desired item.
Powerful—Natural—Vocal—Custom1—
Custom2—Flat—Super Bass
15
5 Touch c or d next to Level to adjust
the output level of the subwoofer.
Range: +6 to –24
6 Touch c or d next to Frequency to select the cut-off frequency.
50Hz—63Hz—80Hz—100Hz—125Hz
Only frequencies lower than those in the selected range are outputted from the subwoofer.
Downloaded from Caradio-Manual.com Manuals
En
59
Section
15
Menu operations
Boosting the bass
You can boost the bass level.
3 Touch Source Level Adjuster on the
audio function menu.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
4 Touch a or b to adjust the source volume.
Range: +4 to –4
2 Touch c or d to select a desired level.
Range: 0 to +6
Notes
! The AM volume level can also be adjusted
with this function.
! Video CD, CD, compressed audio and DivX
are automatically set to the same source level
adjustment volume.
! iPod and USB storage device are automatically set to the same source level adjustment
volume.
! External unit 1 and external unit 2 are automatically set to the same source level adjustment
volume.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are output
from the front or rear speakers.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Touch c or d next to Frequency to select cut-off frequency.
Off (off)—50Hz—63Hz—80Hz—100Hz—
125Hz
Only frequencies higher than those in the selected range are output from the front or rear
speakers.
Adjusting source levels
With SLA (source level adjustment), the volume levels of each source can be adjusted to
prevent significant differences between
sources.
! Settings are based on the FM volume level,
which remains unchanged.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 57.
2 Compare the FM volume level with the
level of the source you wish to adjust.
from Caradio-Manual.com Manuals
60 Downloaded
En
Section
Menu operations
Setting up the DVD player
Setting the subtitle language
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Subtitle Language on the
Video Setup menu.
A subtitle language menu is displayed.
3 Touch the desired language.
The subtitle language is set.
# If you have selected Others, refer to When you
select Others on this page.
Notes
! If the selected language is not available, the
language specified on the disc is displayed.
! You can also switch the subtitle language by
touching the icon during playback. (Refer to
Playing moving images on page 18.)
! The setting made here will not be affected
even if the subtitle language is switched during playback using Subtitle.
When you select Others
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Audio Language on the Video
Setup menu.
An audio language menu is displayed.
3 Touch the desired language.
The audio language is set.
# If you have selected Others, refer to When you
select Others on this page.
Notes
! If the selected language is not available, the
language specified on the disc is used.
! You can also switch the audio language by
touching Audio during playback. (Refer to
Playing moving images on page 18.)
! The setting made here will not be affected
even if the audio language is switched during
playback using Audio.
Setting the menu language
You can set the preferred language in which
the menus recorded on a disc are displayed.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
A language code input display is shown when
Others is selected. Refer to Language code
chart for DVD on page 105.
2 Touch Menu Language on the
Video Setup menu.
A menu language menu is displayed.
1 Touch 0 to 9 to input the language
code.
3 Touch the desired language.
The menu language is set.
# To cancel the entered numbers, touch C.
2
Registering the code.
Registering the code.
Setting the audio language
You can set the preferred audio language.
Menu operations
You can set a desired subtitle language. When
available, the subtitles will be displayed in the
selected language.
15
# If you have selected Others, refer to When you
select Others on this page.
Note
If the selected language is not available, the language specified on the disc is displayed.
Setting the multi-angle DVD
display
The angle icon can be set so it appears on
scenes where the angle can be switched.
Downloaded from Caradio-Manual.com Manuals
En
61
Section
15
Menu operations
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Multi Angle on the Video Setup
menu to turn angle icon display on or off.
Setting the aspect ratio
There are two kinds of display: a wide screen
display that has a width-to-height ratio (TV aspect ratio) of 16:9, and regular display that has
a TV aspect of 4:3. Be sure to select the correct
TV aspect for the display connected to V OUT.
! When using regular display, select either
Letter Box or Pan Scan. Selecting 16 : 9
may result in an unnatural picture.
! If you select the TV aspect ratio, the unit’s
display will change to the same setting.
Setting the slide show interval
JPEG files can be viewed as a slide show on
this unit. In this setting, the interval between
each image can be set.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Time Per Photo Slide on the
Video Setup menu to select the slide show
interval.
Touch Time Per Photo Slide repeatedly until
the desired setting appears.
! 5sec – JPEG images switch at intervals of 5
seconds
! 10sec – JPEG images switch at intervals of
10 seconds
! 15sec – JPEG images switch at intervals of
15 seconds
! Manual – JPEG images can be switched
manually
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch TV Aspect on the Video Setup
menu to select the TV aspect ratio.
Touch TV Aspect repeatedly until the desired
aspect ratio appears.
! 16 : 9 – Wide screen picture (16:9) is displayed as is (initial setting)
! Letter Box – The picture is the shape of a
letterbox with black bands on the top and
bottom of the screen
! Pan Scan – The picture is cut short on the
right and left sides of the screen
Notes
! When playing discs that do not specify
Pan Scan, the disc is played back in
Letter Box display even if you select the
Pan Scan setting. Confirm whether the disc
package bears the 16 : 9 LB mark.
! The TV aspect ratio cannot be changed for
some discs. For details, refer to the disc’s instructions.
Setting parental lock
Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set parental lock to the desired level.
! When you have a parental lock level set
and play a disc featuring parental lock,
code number input indications may be displayed. In such cases, playback will begin
when the correct code number is entered.
Setting the code number and level
A code number must be registered in order to
play back discs with parental lock.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Parental on the Video Setup
menu.
3 Touch 0 to 9 to input a four digit code
number.
# To cancel the entered numbers, touch C.
from Caradio-Manual.com Manuals
62 Downloaded
En
Section
Menu operations
4
Registering the code.
15
4
Registering the code.
Registering the code.
5
Touch 1 to 8 to select the desired level.
6 Touch Enter.
The parental lock level is set.
! 8 – Playback of the entire disc is possible
(initial setting)
! 7 to 2 – Playback of discs for children and
non-adult-oriented discs is possible
! 1 – Playback of discs for children only is
possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is stored on the disc.
Look for the level indication written on the
disc package, included literature or on the
disc itself. Parental lock of this unit is not possible if a parental lock level is not stored on
the disc.
! With some discs, the parental lock may be active only for certain levels of scenes. The playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the disc.
Changing the level
You can change the set parental lock level.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Parental on the Video Setup
menu.
3 Touch 0 to 9 to input the registered
code number.
This sets the code number, and the level can
now be changed.
# If you enter an incorrect code number, the
icon is displayed. Touch C and enter the correct
code number.
# If you forget your code number, refer to If you
forget your code number on this page.
5
Touch 1 to 8 to select the desired level.
Menu operations
The code number is set, and the level can now
be set.
Registering the code.
6 Touch Enter.
The new parental lock level is set.
If you forget your code number
Press RESET.
Setting the DivX subtitle file
You can select whether or not to display DivX
external subtitles.
! The DivX subtitles will be displayed even
when Custom is selected if no DivX external subtitle files exist.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch DivX Subtitle on the Video Setup
menu to select the desired subtitle setting.
! Original – Display the DivX subtitles
! Custom – Display the DivX external subtitles
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.
Downloaded from Caradio-Manual.com Manuals
En
63
Section
Menu operations
15
Displaying the DivXâ VOD
registration code
In order to play DivX VOD (video on demand)
contents on this unit, the unit must first be registered with a DivX VOD contents provider.
For registration, generate a DivX VOD registration code and submit it to your provider.
! Keep a record of the code as you will need
it when you register your unit to the DivX
VOD provider.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch DVD Auto Play to turn automatic
playback on.
# To turn automatic playback off, touch
DVD Auto Play again.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch DivX VOD on the Video Setup
menu.
Registration Code and Deregistration Code
appear.
3 Touch Registration Code.
Your registration code is displayed.
Displaying the deregistration code
If your device is already registered, deregister
it by entering the deregistration code.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch DivX VOD on the Video Setup
menu.
3
Touch Deregistration Code.
# To cancel deregistration, touch Cancel.
4 Touch OK.
The deregistration is complete.
Automatic playback of DVDs
When a DVD disc with a DVD menu is inserted, this unit will cancel the menu automatically and start playback from the first chapter
of the first title.
! Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
from Caradio-Manual.com Manuals
64 Downloaded
En
Section
Menu operations
System settings
Switching the auxiliary setting
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch AUX Input on the system menu
to turn AUX Input on or off.
Setting AV input
Activate this setting when using an external
video component connected to this unit.
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
3 Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
# When no subwoofer is connected to the rear
output, select Full (full-range speaker).
# When a subwoofer is connected to the rear
output, select Subwoofer (subwoofer).
Notes
! Even if you change this setting, there will be
no output unless you turn the subwoofer output on (refer to Using subwoofer output on
page 59).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
2 Touch AV Input on the system menu to
turn AV Input on or off.
Switching sound muting/
attenuation
Setting the rear output and
subwoofer controller
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is canceled.
This unit’s rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (Full) or subwoofer
(Subwoofer) connection. If you switch the
rear output setting to Subwoofer, you can
connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range
speaker connection (Full).
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
Menu operations
Activate this setting when using an auxiliary
device connected to this unit.
15
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Mute/ATT until the desired setting appears.
Touch Mute/ATT until the desired setting appears in the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Downloaded from Caradio-Manual.com Manuals
En
65
Section
15
Menu operations
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenuated and only the volume can be adjusted.
(No other audio adjustments can be made.)
! Operation returns to normal when the phone
connection is ended.
Clearing Bluetooth memory
Selecting the menu language
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
The menu language can be selected from four
languages.
If text information such as the title name, artist
name or a comment is embedded in a European language, they can also be displayed
on this unit.
! The language can be changed for the following:
— System menu
— Video Setup
— On-screen display
— Multi language setting for DivX
— Language for cautions
Some operations on this unit are prohibited from use while driving or require
careful attention when operated. In
such cases, a caution will appear on the
display. You can change the language
for caution messages with this setting.
! If the embedded language and the selected
language setting are not the same, text information may not display properly.
! Some characters may not be displayed
properly.
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch System Language on the system
menu to select the desired language.
(AVH-P3300BT only)
Important
Never turn the unit off while the Bluetooth memory is being cleared.
1 Turn the unit off.
Refer to Basic operations on page 13.
3 Touch Bluetooth Memory Clear on the
system menu.
4 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch OK to delete the memory.
# If you do not want to clear the memory, touch
Cancel.
Updating Bluetooth connection
software
(AVH-P3300BT only)
This function is used to update this unit with
the latest software. For information on the software and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
3
3 Touch the desired language.
English (English)—Français (French)—
Español (Spanish)—Português (Portuguese)
Touch Bluetooth Software Update.
4 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish updating the software.
from Caradio-Manual.com Manuals
66 Downloaded
En
Section
Menu operations
Displaying the Bluetooth
system version
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
3 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear reversed.
This unit features a function that automatically
switches to the rear view camera video (R.C
IN) when a rear view camera is installed on
your car and the gear shift is moved to the REVERSE (R) position. (For more details, consult your dealer.)
! After you set up the rear view camera setting, move the gear shift to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold MUTE.
! Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source using the touch panel keys
on page 13.
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
! Battery – When the polarity of the connected lead is positive while the gear shift
is in REVERSE (R) position
! Ground – When the polarity of the connected lead is negative while the gear shift
is in REVERSE (R) position
! Off – When a rear view camera is not connected to this unit
Menu operations
(AVH-P3300BT only)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
15
Setting the video signal
When you connect this unit to an AV equipment to this unit, select the suitable video signal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video signal setting.
! You can operate this function only for the
video signal input into the AV input.
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Video Signal Setting on the function menu.
Video Signal Setting items are displayed.
! AV – Adjusts the AV video signal
! AUX – Adjusts the AUX video signal
! Camera – Adjusts the rear view camera
video signal
3 Touch c or d to select the desired
video signal appears.
Auto—PAL—NTSC—PAL-M—PAL-N—
SECAM
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car’s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
Downloaded from Caradio-Manual.com Manuals
En
67
Section
15
Menu operations
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto TA
or auto EQ while driving.
CAUTION
! Thoroughly check the conditions before performing auto EQ as the speakers may be damaged if these functions are performed when:
— The speakers are incorrectly connected.
(For example, when a rear speaker is connected as a subwoofer output.)
— A speaker is connected to a power amp delivering output higher than the speaker’s
maximum input power capability.
! If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in battery drainage. Be sure to place
the microphone in the specified location.
Before operating the auto EQ function
! Carry out auto EQ in as quiet a place as
possible, with the car engine and air conditioning switched off. Also cut power to car
phones or portable telephones in the car, or
remove them from the car before carrying
out auto EQ. Sounds other than the measurement tone (surrounding sounds, engine sound, telephones ringing etc.) may
prevent correct measurement of the car interior acoustic characteristics.
! Be sure to carry out auto EQ using the optional microphone. Using another microphone may prevent measurement, or result
in incorrect measurement of the car interior acoustic characteristics.
! In order to perform auto EQ, the front
speaker must be connected.
! When this unit is connected to a power
amp with input level control, auto EQ may
not be possible if the power amp’s input
level is set below the standard level.
! When this unit is connected to a power
amp with an LPF, turn this LPF off before
performing auto EQ. Also set the cut-off fre-
quency for the built-in LPF of an active subwoofer to the highest frequency.
! The distance has been calculated by computer to be the optimum delay to give accurate results for the circumstances, so
please continue to use this value.
— The reflected sound within the car is
strong and delays occur.
— The LPF on active subwoofers or external amps delay the lower sounds.
! Auto EQ changes the audio settings as follows:
— The fader/balance settings return to the
center position. (Refer to Using fader/
balance adjustment on page 58.)
— The equalizer curve switches to Flat.
(Refer to Recalling equalizer curves on
page 58.)
— The front, center and rear speakers will
automatically be adjusted to a high
pass filter setting.
! Previous settings for auto EQ will be overwritten.
Performing auto EQ
1 Stop the car in a place that is quiet,
close all the doors, windows and sun roof,
and then turn the engine off.
If the engine is left running, engine noise may
prevent correct auto EQ.
2 Fix the optional microphone in the center of the headrest of the driver’s seat, facing forward.
The auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat to
carry out auto EQ.
from Caradio-Manual.com Manuals
68 Downloaded
En
Section
Menu operations
3 Turn the ignition switch to ON or ACC.
If the car’s air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct auto
EQ.
15
# To stop auto EQ, touch Stop.
# To cancel auto EQ measurement mode during
this procedure, touch the following touch panel
key.
5 Touch Auto EQ Measurement to enter
auto EQ measurement mode.
6 Plug the microphone into the microphone input jack on this unit.
(AVH-P4300DVD)
9 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or
malfunction.
Menu operations
Canceling auto EQ measurement
mode.
4 Display the system menu.
Refer to Introduction of menu operations on
page 57.
10 Press h(eject) to close the panel.
(AVH-P4300DVD only)
Note
(AVH-P4300DVD)
Do not press h (eject) to open or close the panel
when you are using the microphone.
(AVH-P3300BT)
7
Touch Start to start auto EQ.
8 When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement begins.
When auto EQ is completed, Complete is displayed.
When the car’s interior acoustic characteristics cannot be measured correctly, an error
message will be displayed. (Refer to Understanding auto EQ error messages on page 94.)
# It takes about nine minutes for auto EQ measurement to be completed when all the speakers
are connected.
Downloaded from Caradio-Manual.com Manuals
En
69
Section
Menu operations
15
Entertainment settings
Selecting the OSD color
Selecting the illumination color
The OSD color can be changed.
This unit is equipped with multiple-color illumination.
1 Display the entertainment menu.
Refer to Introduction of menu operations on
page 57.
Direct selection from preset
illumination colors
2
Touch Appearance.
3
Touch Screen.
You can select an illumination color from the
color list.
4
Touch one of the colors on the list.
1 Display the entertainment menu.
Refer to Introduction of menu operations on
page 57.
Selecting the background display
2
Touch Appearance.
You can switch the background that is displayed when listening to a source.
3 Touch Illumination and then touch a
color on the list.
1 Display the entertainment menu.
Refer to Introduction of menu operations on
page 57.
Customizing the illumination color
2
Touch Background.
1 Display the entertainment menu.
Refer to Introduction of menu operations on
page 57.
3
Touch the desired setting.
2
Touch Appearance.
# If no JPEG images are stored in this unit, you
cannot select photo. To store a JPEG image to
this unit, refer to Capture an image in JPEG files
on page 43.
3 Touch Illumination and then touch
Custom.
4
Display the customizing menu.
Displaying the customizing menu.
5 Touch the color bar to customize the
color.
6
Touch c or d to fine-tune the color.
7 Touch the icon and hold to store the
customized color in the memory.
Memo
Storing the customized color in
the memory.
The customized color has been stored in the
memory.
The set color will be recalled from the memory
the next time you touch the same icon.
from Caradio-Manual.com Manuals
70 Downloaded
En
Section
Menu operations
15
Customizing menus
Menu operations
1 Display menu columns to register.
Refer to Introduction of menu operations on
page 57.
You can customize menus except
Video Setup menu.
2 Touch and hold the menu column to
register it.
# To cancel registration, touch and hold the
menu column again.
3 Display the custom menu and choose a
registered menu.
Refer to Introduction of menu operations on
page 57.
Note
You can register up to 12 columns.
Downloaded from Caradio-Manual.com Manuals
En
71
Section
16
Other Functions
Changing the picture
adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), Temperature (temperature), Black Level (black level) and
RGB Dot Adjust (RGB dot clock adjustment)
for each source and rear view camera.
! You cannot adjust Color, Hue, Contrast
and Black Level for the audio source.
1 Press and hold MENU to display
Picture Adjustment.
The adjustment function names are displayed.
2 If you are adjusting the
Picture Adjustment, select the unit.
NAVI
Adjusting the Picture Adjustment
for the Navigation unit.
Rear
View
Adjusting the Picture Adjustment
for the rear view camera.
Source
Adjusting the Picture Adjustment
for the source.
# You cannot adjust the picture adjustment for
the rear view camera when Camera Polarity is
set to Off. (Refer to Setting the rear view camera
(back up camera) on page 67.)
# You can adjust Hue only when the color system is set to NTSC.
# With some rear view cameras, picture adjustment may not be possible.
4 Touch c or d to adjust the selected
item.
Each time you touch c or d, the level of the
selected item increases or decreases.
# Dimmer can be adjusted from +1 to +48.
# Temperature can be adjusted from +3 to –3.
5 Touch Black Level and RGB Dot Adjust
to adjust.
# Black Level can be set on or off.
# RGB Dot Adjust can be set to 1 or 2.
Notes
! You cannot operate this function while driving.
! Different Brightness/Contrast/Dimmer settings can be set for when the illumination
switch is on and when it is off.
Setting rear monitor output
3 Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment items are displayed.
!
!
!
!
!
!
!
!
Brightness – Adjusts the black intensity
Contrast – Adjusts the contrast
Color – Adjusts the color saturation
Hue – Adjusts the tone of color (red or
green is emphasized)
Dimmer – Adjusts the brightness of the display
Temperature – Adjusts the color temperature, resulting in a better white balance
Black Level – Emphasizes the dark portions
of images making the difference between
bright and dark more distinct
RGB Dot Adjust – Adjusts phase shifting
by dot clock when a Navigation unit is connected
The output source for the rear monitor can be
switched to the following:
! Front – The source on the front screen of
this unit
Disc – The video and sound from the DVD
AV – The video and sound from AV input
AUX– The source for AUX input
Off– No source
Note
You cannot play DivX files on the rear and front
monitors at the same time.
from Caradio-Manual.com Manuals
72 Downloaded
En
Section
Other Functions
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Press and hold MENU to display
Picture Adjustment.
3 Press and hold MENU to start Touch
Panel Calibration.
The 4-point touch panel adjustment screen appears.
4 Touch each of the arrows on the four
corners of the screen.
# To cancel the adjustment, press and hold
MENU.
5 Press MENU to complete 4-point adjustment.
Data for the adjusted position is saved.
# Do not turn off the engine while the data is
being saved.
6 Press MENU to proceed to 16-point adjustment.
The 16-point touch panel adjustment screen
appears.
# To cancel the adjustment, press and hold
MENU.
7 Gently touch the center of the + mark
displayed on the screen.
After you touch all the marks, the data for the
adjusted position is saved.
# Do not turn off the engine while the data is
being saved.
8 Press and hold MENU to complete the
adjustment.
Using an AUX source
Other Functions
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel. There are two adjustment methods: 4-point adjustment, in
which you touch four corners of the screen;
and 16-point adjustment, in which you make
fine-adjustments on the entire screen.
! Touch the screen gently for adjustment.
Forcefully pressing the touch panel may damage the touch panel. Do not use a sharp
pointed tool such as a ballpoint pen or mechanical pen. Doing so may damage the
screen.
! If the touch panel cannot be adjusted properly, consult your local Pioneer dealer.
16
A separately sold auxiliary device such as a
VCR or portable device can be connected to
this unit. When connected, the auxiliary device
is automatically recognized as an AUX source
and is assigned to AUX.
About AUX connection methods
You can connect auxiliary devices to this unit.
Mini pin plug cable (AUX)
When connecting an auxiliary device using a
mini plug cable
iPods and portable audio/video players can be
connected to this unit via mini plug cable.
! If an iPod with video capabilities is connected to this unit via 3.5 mm plug (4 pole)
cable (such as the CD-V150M), you can
enjoy the video contents of the connected
iPod.
! A portable audio/video player can be connected by using a 3.5 mm plug (4 pole) with
an RCA cable (sold separately). However,
depending on the cable, a reverse connection between the red (right side audio)
cable and yellow (video) cable may be required in order for the sound and video
image to be reproduced correctly.
Downloaded from Caradio-Manual.com Manuals
En
73
Section
16
Other Functions
% Insert the stereo mini plug into the
AUX input jack on this unit.
Refer to Installation on the next page.
Refer to What’s what on page 11.
Switching the equalizer curves.
Refer to Using the equalizer on
page 58.
Touch and hold for more than two
seconds to turn the auto-equalizer
on or off.
Refer to Using the auto-equalizer
on page 59.
Using an external unit
An external unit refers to a Pioneer product,
such as those which will be available in the future. Although incompatible as a source, the
basic functions of up to two external units can
be controlled with this unit. When two external
units are connected, the external units are
automatically allocated to external unit 1 or external unit 2.
The basic operations of the external unit are
explained below. The allocated functions will
differ depending on the connected external
unit. For details concerning these functions,
refer to the owner’s manual for the external
unit.
Basic operations
The functions allocated to the following operations will differ depending on the connected
external unit. For details concerning these
functions, refer to the owner’s manual for the
connected external unit.
Auto
Audio
Switching to auto or manual.
Switching to video and audio.
Video
Changing the screen mode.
Refer to Changing the wide screen
mode on page 43.
from Caradio-Manual.com Manuals
74 Downloaded
En
Actions will differ depending on
the connected external unit.
F1
F2
F3
Function 1 to 4
Actions will differ depending on
the connected external unit.
F4
Using the functions allocated to 1
to 6 keys.
Actions will differ depending on
the connected external unit.
Section
Installation
17
Connecting the units
WARNING
CAUTION
! PIONEER does not recommend that you install or service your display unit yourself. Installing or servicing the product may expose
you to risk of electric shock or other hazards.
Refer all installation and servicing of your display unit to authorized Pioneer service personnel.
! Secure all wiring with cable clamps or electrical tape. Do not allow any bare wiring to remain exposed.
! Do not drill a hole into the engine compartment to connect the yellow cable of the display unit to the vehicle battery. Engine
vibration may eventually cause the insulation
to fail at the point where the wire passes from
the passenger compartment into the engine
compartment. Take extra care in securing the
wire at this point.
! It is extremely dangerous to allow the microphone lead to become wound around the
steering column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving.
! Make sure that cables will not interfere with
moving parts of the vehicle, such as the gearshift, parking brake or seat sliding mechanism.
! Do not shorten any cables. If you do, the protection circuit may fail to work properly.
WARNING
! Use speakers over 50 W (output value) and between 4 W to 8 W (impedance value). Do not
use 1 W to 3 W speakers for this unit.
! The black cable is ground. When installing
this unit or power amp (sold separately), make
sure to connect the ground wire first. Ensure
that the ground wire is properly connected to
metal parts of the car’s body. The ground wire
of the power amp and the one of this unit or
any other device must be connected to the car
separately with different screws. If the screw
for the ground wire loosens or falls out, it
could result in fire, generation of smoke or
malfunction.
Downloaded from Caradio-Manual.com Manuals
Ground wire
Other devices
(Another electronic
device in the car)
Installation
! To avoid the risk of accident and the potential
violation of applicable laws, no viewing of
front seat video should ever occur while the
vehicle is being driven. Also, rear displays
should not be in a location where they are visibly distracting to the driver.
! In some countries or states the viewing of
images on a display inside a vehicle even by
persons other than the driver may be illegal.
Where such regulations apply, they must be
obeyed and this unit’s DVD features should
not be used.
WARNING
! LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
POWER AMP
Metal parts of car’s body
En
75
Section
17
Installation
Important
F
O
N
OF
! This unit cannot be installed in a vehicle without ACC (accessory) position on the ignition
switch.
STAR
T
ACC position
No ACC position
na, connect it to the antenna booster power
supply terminal.
! Never connect the blue/white cable to the
power terminal of an external power amp.
Also, never connect it to the power terminal of
the auto antenna. Doing so may result in battery drain or a malfunction.
! IP-BUS connectors are color-coded. Be sure
to connect connectors of the same color.
! Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result
in a fire or malfunction.
! To prevent a short-circuit, overheating or malfunction, be sure to follow the directions
below.
— Disconnect the negative terminal of the
battery before installation.
— Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around
wiring that comes into contact with metal
parts to protect the wiring.
— Place all cables away from moving parts,
such as the gear shift and seat rails.
— Place all cables away from hot places,
such as near the heater outlet.
— Do not connect the yellow cable to the battery by passing it through the hole to the
engine compartment.
— Cover any disconnected cable connectors
with insulating tape.
— Do not shorten any cables.
— Never cut the insulation of the power cable
of this unit in order to share the power
with other devices. The current capacity of
the cable is limited.
— Use a fuse of the rating prescribed.
— Never wire the negative speaker cable directly to ground.
— Never band together negative cables of
multiple speakers.
! When this unit is on, control signals are sent
through the blue/white cable. Connect this
cable to the system remote control of an external power amp or the vehicle’s auto-antenna
relay control terminal (max. 300 mA 12 V DC).
If the vehicle is equipped with a glass anten-
from Caradio-Manual.com Manuals
76 Downloaded
En
Section
Installation
17
Installation
Downloaded from Caradio-Manual.com Manuals
En
77
Section
17
Installation
Connecting the power cord
26 pin cable (Supplied with Navigation unit)
This product
Insert the 26 pin cable in the direction
indicated in the figure.
Navigation unit can
be connected
(AVIC-U220(sold
separately)).
RGB input
(AVH-P4300DVD
only)
Antenna input
Please contact your
dealer to inquire about
the connectable
navigation unit.
Fuse (10 A)
AUX jack (3.5 ø) (AVH-P4300DVD only)
Use a mini plug cable to connect with auxiliary device.
Microphone input (AVH-P3300BT only)
Yellow
Connect to the constant 12 V supply terminal.
Orange/white
Connect to lighting switch terminal.
Fuse resistor
Red
Connect to terminal controlled by ignition switch (12 V DC).
Fuse resistor
Black (chassis ground)
Connect to a clean, paint-free metal location.
White
Front speaker



White/black
Left
Green
Rear speaker or
Subwoofer (4 Ω)
Gray

Gray/black
Right
Violet




Green/black
Front speaker
Violet/black
Rear speaker or
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything to Green and Green/black leads.
Green
Violet

Subwoofer (4 Ω)
×2
Not used.
Green/black
from Caradio-Manual.com Manuals
78 Downloaded
En
Violet/black

Section
Installation
4 m (13 ft. 1 in.)
17
Microphone (AVH-P3300BT only)
Wired remote input
Hard-wired remote control adaptor can be connected
(sold separately).
Fuse resistor
Installation
Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Yellow/black
If you use an equipment with Mute function, wire this lead to
the Audio Mute lead on that equipment. If not, keep the Audio
Mute lead free of any connections.
Connection method
2. Clamp firmly with
needle-nosed pliers.
1. Clamp the lead.
Note:
· The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Power supply side
Parking brake
switch
Ground side
Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal (max. 300 mA 12 V DC).
With a 2 speaker system, do not connect anything to the speaker leads
that are not connected to speakers.
Note:
· Change the initial setting of this unit. The
subwoofer output of this unit is monaural.
Downloaded from Caradio-Manual.com Manuals
En
79
Section
17
Installation
When connecting to separately sold power amp
Front output
Rear output
Power amp
(sold separately)
To rear output
Power amp
(sold separately)
To front output
Subwoofer output
This product
Power amp
(sold separately)
(AVHP4300DVD
To subwoofer
only)
output
Connect with RCA cables
(sold separately)
System remote control
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal. (max. 300 mA 12 V DC).
Left
Subwoofer
Front speaker
Rear speaker
Perform these connections when
using the optional amplifier.
from Caradio-Manual.com Manuals
80 Downloaded
En
Right












Subwoofer
Front speaker
Rear speaker
Section
Installation
17
Connecting the system (for AVH-P4300DVD model)
Microphone
for hands-free phoning
(supplied with Bluetooth adapter)
Bluetooth adapter
(e.g. CD-BTB200)
(sold separately)
IP-BUS input
Installation
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
Black
This product
1.5 m (4 ft. 11 in.)
USB cable
(Supplied with this unit)
Connect to separately sold
USB device.
IP-BUS cable
(Supplied with Bluetooth adapter)
Connecting the system (for AVH-P3300BT model)
IP-BUS input
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
HD Radio tuner
(sold separately)
This product
IP-BUS cable
(Supplied with HD Radio tuner)
Downloaded from Caradio-Manual.com Manuals
En
81
Section
17
Installation
When connecting with optional CD-IU200V cable (AVH-P4300DVD only)
IP-BUS input
AUX input (AUX)
Microphone
for hands-free phoning
(supplied with Bluetooth adapter)
Bluetooth adapter
(e.g. CD-BTB200)
(sold separately)
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
iPod with video capabilities
(sold separately)
USB input
This product
Black
Dock connector
1.5 m
(4 ft. 11 in.)
IP-BUS cable
(Supplied with Bluetooth adapter)
USB cable
(Supplied with
this unit)
Interface cable
(CD-IU200V) (sold separately)
from Caradio-Manual.com Manuals
82 Downloaded
En
Section
Installation
17
When connecting the external video component and the display
Display with RCA input jacks
(sold separately)
Installation
To video input
To audio
inputs
Rear monitor output (V OUT)
RCA cables
(sold separately)
Video input
(V IN)
Rear audio output
(REAR AUDIO OUT)
Mini pin plug cable
(sold separately)
To video output
To audio outputs
This product
Audio inputs
(L IN, R IN)
(AVH-P4300DVD only)
External video component (sold
separately)
! It is necessary to change AV Input in
System Menu when connecting the external video component.
When using a display connected to rear video output
This product’s rear video output and rear
audio output are for connection of a display to
enable passengers in the rear seats to watch
the DVD, etc.
WARNING
! Never install the display in a location where it
is visible to the driver while driving.
Downloaded from Caradio-Manual.com Manuals
En
83
Section
17
Installation
When connecting with a rear
view camera
Rear view camera input (R.C IN)
When this product is used with a rear view
camera, it is possible to automatically switch
from the video to rear view image when the
gear shift is moved to REVERSE (R).
This product
WARNING
(AVH-P4300DVD
only)
RCA cable
(sold separately)
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER
USE MAY RESULT IN INJURY OR DAMAGE.
To video output
CAUTION
Fuse resistor
! The screen image may appear reversed.
! The rear view camera function is to be used
as an aid to keep an eye on trailers, or while
backing up. Do not use for entertainment purposes.
! Objects in the rear view may appear closer or
more distant than they actually are.
Rear view camera
(sold separately)
Violet/white
Of the two lead wires
connected to the back lamp,
connect the one in which the
voltage changes when the
gear shift is in the REVERSE
(R) position. This connection
enables the unit to
sense whether the car is
moving forwards or
backwards.
CAUTION
You must use a camera which outputs mirror
reversed images.
It is necessary to set Camera Polarity properly in
System Menu when connecting the rear view
camera.
from Caradio-Manual.com Manuals
84 Downloaded
En
Section
Installation
Installation
! To ensure proper heat dispersal when using
this unit, make sure you leave ample space
behind the rear panel and wrap any loose
cables so they are not blocking the vents
when installing the unit.
Leave ample
5 cm
space
5 cm
Installation
Notes
! Check all connections and systems before
final installation.
! Do not use unauthorized parts as this may
cause malfunctions.
! Consult your dealer if installation requires drilling of holes or other modifications to the vehicle.
! Do not install this unit where:
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result of a sudden stop.
! Do not install the display where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating
systems or safety features, including air bags,
hazard lamp buttons or (iii) impair the driver’s
ability to safely operate the vehicle.
! The semiconductor laser will be damaged if it
overheats. Install this unit away from hot
places such as near the heater outlet.
! Optimum performance is obtained when the
unit is installed at an angle of less than 30°.
17
5cm
cm
! To some types of vehicles, this unit cannot be
properly installed. In such case, use the optional installation kit (ADT-VA133).
Installation using the screw
holes on the side of the unit
% Fastening the unit to the factory radiomounting bracket.
Position the unit so that its screw holes are
aligned with the screw holes of the bracket,
and tighten the screws at 3 or 4 locations on
each side.
Downloaded from Caradio-Manual.com Manuals
En
85
Section
17
Installation
1
2
Installing the microphone
(AVH-P3300BT only)
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around the steering column or gearstick. Be sure to install the
unit in such a way that it will not obstruct driving.
Note
Install the microphone in a position and orientation that will enable it to pick up the voice of the
person operating the system.
3
4
5
1 If the pawl gets in the way, bend it down.
2 Factory radio mounting bracket
3 Use either truss (5 mm × 8 mm) or flush
surface (5 mm × 9 mm) screws, depending
on the bracket screw holes.
4 Frame
In some types of vehicles, discrepancy may
occur between the unit and the dashboard.
If this happens, use the supplied frame to
fill the gap.
5 Dashboard or console
When installing the microphone on
the sun visor
1 Install the microphone on the microphone clip.
1
2
1 Microphone
2 Microphone clip
2 Install the microphone clip on the sun
visor.
With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
from Caradio-Manual.com Manuals
86 Downloaded
En
Section
Installation
17
1
2 Install the microphone clip on the rear
side of the steering column.
1
Installation
2
1 Microphone clip
2 Clamp
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
2
When installing the microphone on
the steering column
1 Install the microphone on the microphone clip.
1
2
1 Double-sided tape
2 Clamp
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
Adjusting the microphone angle
3
4
1 Microphone
2 Microphone base
3 Microphone clip
4 Fit the microphone lead into the groove.
# Microphone can be installed without using
microphone clip. In this case, detach the microphone base from the microphone clip. To detach
the microphone base from the microphone clip,
slide the microphone base.
The microphone angle can be adjusted.
Downloaded from Caradio-Manual.com Manuals
En
87
Appendix
Additional Information
Troubleshooting
Common
Symptom
Cause
The power will
not turn on.
The unit will
not operate.
Confirm once more
Leads and connectors are incor- that all connecrectly connected. tions are correct.
The fuse is
blown.
Action (Reference page)
Rectify the cause
and then replace
the fuse. Be sure to
install a fuse with
the same rating.
Press RESET. (Page
Noise and/or
other factors are 11)
causing the builtin microprocessor to operate incorrectly.
Operation with
the remote
control is not
possible.
The unit does
not operate
correctly even
when the appropriate remote control
buttons are
pressed.
Battery power is
low.
Load a new battery.
Some operations Try operating with
another disc.
are prohibited
with certain
discs.
Cause
Action (Reference page)
There is no
image displayed.
The parking
brake cable is
not connected.
Connect the parking brake cable,
and apply the parking brake.
The parking
brake is not applied.
Connect the parking brake cable,
and apply the parking brake.
The
icon is The operation is
displayed, and prohibited for the
operation is not disc.
possible.
The operation is
not compatible
with the configuration of the
disc.
The disc loaded
is not compatible
with this video
system.
Change the disc to
one that is compatible with your
video system.
Cables are not
connected correctly.
Connect the cables
correctly.
The unit is performing still,
slow motion or
frame-by-frame
playback.
There is no sound
during still, slow
motion or frameby-frame playback.
This operation is
not possible.
This operation is
not possible.
The image displayed stops
(pauses) and
the unit cannot
be operated.
Stop playback
The data could
once, and start
no longer be
read during play- playback again.
back.
There is no
sound.
The volume
level is low.
The volume level
is low.
Adjust the volume
level.
The attenuator is Turn the attenuator
on.
off.
The sound and The unit is not
video skip.
firmly secured.
Playback is not The disc is dirty. Clean the disc.
possible.
The type of disc Check the disc
loaded cannot be type.
played on this
unit.
There is no
sound.
The volume
level will not
rise.
Symptom
Firmly secure the
unit.
File size and
transmission rate
are above recommended rates.
Create a DivX file
that is within the
recommended size
and transmission
rate.
The aspect
ratio is incorrect and the
image is
stretched.
The aspect ratio
setting is incorrect for the display.
Select the appropriate setting for
your display. (Page
62)
The motor
sounds when
the ignition
switch is
turned ON (or
is turned to
ACC).
The unit is confirming whether
or not a disc is
loaded.
This is a normal
operation.
from Caradio-Manual.com Manuals
88 Downloaded
En
Appendix
Additional Information
Symptom
Cause
Action (Reference page)
Symptom
Cause
Action (Reference page)
Nothing is displayed.
The touch
panel keys cannot be used.
The rear view
camera is not
connected.
Connect a rear
view camera.
Dialog language (and
subtitle language) cannot
be switched.
The DVD being
played does not
feature multiple
language recordings.
The language cannot be switched if
they are not recorded on the disc.
Camera Polarity Press and hold
MENU to return to
is at incorrect
the source display
setting.
and then select the
correct setting for
Camera Polarity.
(Page 67)
Sub-folders
cannot be
played back.
Select the repeat
Folder repeat
play has been se- range again.
lected.
Select the repeat
Another folder
The repeat
range changes was selected dur- range again.
automatically. ing repeat play.
Track search or
fast forward/reverse was performed during
file repeat play.
Select the repeat
range again.
Cause
Action (Reference page)
DVD
Symptom
Playback is not The loaded disc
possible.
has a different region number
from this unit.
Replace the disc
with one featuring
the same region
number as this
unit.
A parental lock Parental lock is
message is dis- activated.
played and
playback is not
possible.
Turn parental lock
off or change the
level. (Page 62)
No subtitles
are displayed.
Subtitles are not
The DVD being
played does not displayed if they
feature subtitles. are not recorded
on the disc.
Switch the lanYou can only
switch between guage using the
items indicated disc menu.
in the disc menu.
Playback is not
performed with
the audio language and subtitle language
settings selected in Video
Setup menu.
The DVD being
played does not
feature dialog or
subtitles in the
selected language.
The language cannot be switched if
the selected language is not recorded on the disc.
The viewing
angle cannot
be switched.
The DVD being
played does not
feature scenes
shot from multiple angles.
The viewing angle
cannot be
switched if the
DVD does not feature scenes recorded from
multiple angles.
You are trying to
switch to multiangle viewing for
a scene that was
not recorded
from multiple angles.
Switch between
multiple angles
when watching
scenes recorded
from multiple angles.
Additional Information
Switch the display
There is no emNo xxxx apbedded text infor- or play another
pears when a
track/file.
display is chan- mation.
ged (No Title,
for example).
Switch the lanYou can only
switch between guage using the
items indicated disc menu.
in the disc menu.
The code number Enter the correct
Parental lock
code number.
cannot be can- is incorrect.
(Page 62)
celed.
You have forgotten your code
number.
Press RESET. (Page
63)
Downloaded from Caradio-Manual.com Manuals
En
89
Appendix
Additional Information
Symptom
Cause
Action (Reference page)
The image is
extremely unclear/distorted
and dark during playback.
Some discs fea- Since this unit is
compatible with
ture a signal to
prohibit copying. the analog copy
generation management system,
when playing a
disc that has a signal prohibiting
copying, horizontal
stripes or other imperfections may
appear when
viewed on some
displays. This is
not a malfunction.
Bluetooth audio/telephone
Symptom
Cause
Action
The sound
from the Bluetooth audio
source is not
played back.
There is a call in
progress on a
Bluetooth connected cellular
phone.
The sound will be
played back when
the call is terminated.
A Bluetooth-con- Do not operate the
cellular phone at
nected cellular
this time.
phone is currently being operated.
A call was made
with a Bluetoothconnected cellular phone and
then immediately
terminated. As a
result, communication between
this unit and the
cellular phone
was not terminated properly.
Video CD
Symptom
Cause
Action
The PBC (playback control)
menu cannot
be called up.
The Video CD
being played
does not feature
PBC.
This operation is
not available for
Video CDs that do
not feature PBC.
Repeat play
and track/time
search are not
possible.
This operation is
The Video CD
being played fea- not available for
Video CDs that features PBC.
ture PBC.
iPod
Symptom
Cause
The iPod does
not operate
correctly.
The cables are in- Disconnect the
cable from the
correctly coniPod. Once the
nected.
iPod’s main menu
is displayed, reconnect the iPod and
reset it.
The iPod version
is old.
Action
Update the iPod
version.
Reconnect the
Bluetooth connection between this
unit and the cellular phone.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Tuner
Message
Cause
Action
No Data Provided
This unit cannot
receive artist
name/song title
information.
Move to the desirable location with
good reception.
No Data
This unit cannot
receive program
service name information.
Move to the desirable location with
good reception.
DVD
Message
Cause
Action
Different Region Disc
The disc does not
have the same
region number
as this unit.
Replace the DVD
with one bearing
the correct region
number.
from Caradio-Manual.com Manuals
90 Downloaded
En
Appendix
Additional Information
Message
Cause
Action
Message
Cause
Error-02-XX/
FF-FF
The disc is dirty.
Clean the disc.
The disc is
scratched.
Replace the disc.
Unplayable
File
Select a file that
This type of file
cannot be played can be played.
on this unit.
The disc is
loaded upside
down.
Check that the disc
is loaded correctly.
Format Read
Sometimes there
is a delay between the start of
playback and
when you start to
hear any sound.
Video frame
rate not supported.
DivX file’s frame Select a file that
rate is more than can be played.
30 fps.
There is an elec- Press RESET.
trical or mechanical error.
This type of disc Replace the disc
cannot be played with one that can
be played on this
on this unit.
unit.
The inserted disc Replace the disc.
does not contain
any playable
files.
Protect
Replace the disc.
All the files on
the inserted disc
are embedded
with DRM.
Skipped
The inserted disc Play an audio file
not embedded with
contains DRM
Windows Media
protected files.
DRM 9/10.
TEMP
The temperature
of the unit is outside the normal
operating range.
Audio Format This type of file is Select a file that
not supported on can be played.
not supthis unit.
ported.
External storage device (USB, SD)
Message
Cause
Unplayable
File
Select a file that
This type of file
cannot be played can be played.
on this unit.
The inserted disc Select a file that
contains expired can be played.
DivX VOD content.
Video resolution not supported
The inserted disc Select a file that
contains a high can be played.
definition DivX
file.
Transfer the audio
files to the USB
portable audio
player/USB memory and connect.
Security for the
connected USB
memory is enabled.
Follow the USB
memory instructions to disable security.
Format Read
Sometimes there
is a delay between the start of
playback and
when you start to
hear any sound.
Wait until the message disappears
and you hear
sound.
Skipped
The connected
USB portable
audio player/
USB memory
contains WMA
files that are protected by
Windows Mediaä DRM 9/10.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
It is not possi- This unit’s flash Select a file that
ble to write it memory used as can be played.
the temporary
in the flash.
storage area is
full.
Your device is
not authorized to play
this DivX protected video.
Action
There are no
songs.
Wait until the unit
returns to a temperature within the
normal operating
limits.
Rental Expired.
Wait until the message disappears
and you hear
sound.
This unit’s DivX Register this unit
registration code to the DivX VOD
contents provider.
has not been
authorized by the
DivX VOD contents provider.
Downloaded from Caradio-Manual.com Manuals
En
Additional Information
Unplayable
Disc
Action
91
Appendix
Additional Information
Message
Cause
Action
Message
Cause
Action
Protect
All the files on
the connected
USB portable
audio player/
USB memory are
protected by
Windows Media
DRM 9/10.
Transfer audio files
not protected by
Windows Media
DRM 9/10 to the
USB portable
audio player/USB
memory and connect.
Error-02-9X/DX
Communication
failed.
Incompatible
USB
The USB device
connected to is
not supported by
this unit.
Connect a USB
portable audio
player or USB
memory that is
USB Mass Storage
Class compliant.
The USB device
is not formatted
with FAT16 or
FAT32.
The connected
USB device should
be formatted with
FAT16 or FAT32.
Perform one of the
following operations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB portable
audio player/USB
memory.
–Change to a different source.
Then, return to the
USB portable
audio player/USB
memory.
Rental Expired.
The inserted ex- Select a file that
ternal storage de- can be played.
vice contains
expired DivX
VOD content.
Video resolution not supported
The inserted ex- Select a file that
ternal storage de- can be played.
vice contains a
high definition
DivX file.
Incompatible
SD
Check USB
Unsupported SD Use the supported
card is inserted. SD card.
Non-compatible
SD storage device
Remove your device and replace it
with a compatible
SD storage device.
The USB connector or USB cable
has shortcircuited.
Check that the
USB connector or
USB cable is not
caught in something or damaged.
The connected
USB portable
audio player/
USB memory
consumes more
than maximum
allowable current.
Disconnect the
USB portable
audio player/USB
memory and do
not use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect a compliant USB portable
audio player/USB
memory.
It is not possi- This unit’s flash Select a file that
ble to write it memory used as can be played.
the temporary
in the flash.
storage area is
full.
Your device is
not authorized to play
this DivX protected video.
This unit’s DivX Register this unit
registration code to the DivX VOD
contents provider.
has not been
authorized by the
DivX VOD contents provider.
Format Read
Sometimes there
is a delay between the start of
playback and
when you start to
hear any sound.
Video frame
rate not supported.
DivX file’s frame Select a file that
rate is more than can be played.
30 fps.
Wait until the message disappears
and you hear
sound.
Audio Format This type of file is Select a file that
not supported on can be played.
not supthis unit.
ported.
from Caradio-Manual.com Manuals
92 Downloaded
En
Appendix
Additional Information
iPod
Cause
Action
Format Read
Sometimes there
is a delay between the start of
playback and
when you start to
hear any sound.
Wait until the message disappears
and you hear
sound.
Communication
failed.
Disconnect the
cable from the
iPod. Once the
iPod’s main menu
is displayed, reconnect the iPod and
reset it.
Error-02-6X/9X/-DX
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod’s main menu
is displayed, reconnect the iPod and
reset it.
Error-02-67
The iPod firmware version is
old.
Update the iPod
version.
Stop
There are no
songs.
Transfer songs to
the iPod.
Select a list that
There are no
songs in the cur- contains songs.
rent list.
Not Found
No related
songs.
Message
Cause
Action
Error-8D
Built-in FLASH
ROM encountered an error
Turn the ignition
OFF and ON.
SD source cannot be selected during
tag transfer.
Tag information
is being transferred to the
iPod.
Wait until tag
transfer is complete.
Bluetooth
Message
Cause
Action
Error-10
The power failed
for the Bluetooth
module of this
unit.
Turn the ignition
switch OFF and
then to ACC or ON.
If the error message is still displayed after
performing the
above action,
please contact
your dealer or an
authorized Pioneer
Service Station.
Pandora
Message
Cause
Action
Error-19
Communication
failed.
Disconnect the
cable from the
iPod. Once the
iPod’s main menu
is displayed, reconnect the iPod and
reset it.
Start up the
Pandora Application from
your Device.
The Pandora application has not
started running
yet.
Start up the
Pandora application from your
iPod/iPhone.
Unable to
save thumb
rating. Try
again later.
Unable to save
thumb rating.
Try again later.
Unable to
save Bookmark. Try
again later.
Unable to save
BookMark.
Try again later.
Pandora system maintenance. Try
again later.
Pandora system
is undergoing
maintenance.
Try again later.
Skip limit
reached.
Skip limit
reached.
Do not exceed the
skip limit.
Transfer songs to
the iPod.
iTunes tagging
Message
Cause
Action
iPod full. Tags Memory used for
tag information
not transon the iPod is
ferred.
full.
Sync the iPod with
iTunes and clean
up the tagged playlist.
Memory full.
Tags not
stored.
This unit’s flash
memory used as
the temporary
storage area is
full.
Connect the iPod
to this unit and
transfer this unit’s
tag information to
the iPod.
Tags transferred failed.
This unit’s tag in- Check the iPod
formation cannot and try again.
transfer to the
iPod.
Tag store
failed.
Tag information Try again.
cannot be stored
in this unit.
Additional Information
Message
Downloaded from Caradio-Manual.com Manuals
En
93
Appendix
Additional Information
Message
Cause
Action
Message
Cause
Action
This version
of the
Pandora Application is
not supported.
This version of
the Pandora application is not
supported.
Connect an iPod/
iPhone that has a
compatible version
of the Pandora application installed.
Error. Please
check xxxx
speaker.
The microphone
cannot pick up
the measuring
tone of a speaker.
Check Device
Device error mes- Please check your
sage displayed in iPod/iPhone.
Pandora Application.
! Confirm that the
speakers are connected correctly.
! Correct the input
level setting of the
power amp connected to the
speakers.
! Plug the microphone securely
into the jack.
Error. Please
check noise.
The surrounding
noise level is too
high.
! Stop your car in
a place that is
quiet, and switch
off the engine, air
conditioner and
heater.
! Set the microphone correctly.
Pandora is un- Unable to play
music from
able to play
music. Please Pandora.
see your Device.
Please check your
iPod/iPhone.
Create station No station found.
within the
Pandora Application on
Device.
Create a station in
the Pandora application on your
iPod/iPhone.
No Active Sta- No station setion
lected.
Select a station.
Understanding auto EQ
error messages
When correct measurement of the car’s interior acoustic characteristics is not possible
using auto EQ, an error message may appear
on the display. In such cases, refer to the table
below to see what the problem is and how it
may be corrected. After checking, try again.
Message
Cause
Error. Please
check MIC.
The microphone Plug the optional
is not connected. microphone securely into the
jack.
Error. Please
Power is not
check battery. being supplied
from the battery
to this unit.
! Connect the battery correctly.
! Check the battery
voltage.
Understanding messages
Messages
Translation
Screen image may appear reversed.
Pioneer recommends
the use of a camera
which outputs mirrorreversed images.
Otherwise, the screen
image will appear reversed.
Action
from Caradio-Manual.com Manuals
94 Downloaded
En
Appendix
Additional Information
Indicator list
Area 1
!
Area 2
!
!
Indicates that a cellular phone
is connected.
Indicates that an incoming call
has been received and has not
been checked yet.
Not displayed for calls made
when your cellular phone is
disconnected from this unit.
Area 3
Area 1
Indicates that the selected frequency is being broadcast in
stereo.
Indicates the signal strength of the
cellular phone.
Indicates that a Bluetooth telephone is connected.
Indicates that Auto EQ is on.
Indicates that the digital format is
Dolby Digital.
Indicates that the digital format is
MPEG Audio.
Indicates that the digital format is
Linear PCM.
Shows when HD Radio signal is received.
Additional Information
Indicates the battery strength of
the cellular phone.
! The level shown on the indicator may differ from the actual
battery strength.
! If the battery strength is not
available, nothing is displayed
in the battery strength indicator area.
Shows when analog audio of HD
Radio signal is received.
Shows when digital audio of HD
Radio signal is received.
Indicates the sampling frequency.
Shows when HD Radio station information is received.
Indicates that the digital format is
DTS.
Shows when downloadable song
information (tag) from a radio station is received.
Shows when song information
(tag) from an HD Radio station is
being saved to this unit.
1+1ch
2 ch
Indicates the audio channel.
Shows while searching a song/
video in alphabet search mode.
Shows when song information
(tag) is being saved to your iPod.
Shows when this unit has the song
information (tag).
Mch
Indicates that a disc with PBC On
is being played.
Downloaded from Caradio-Manual.com Manuals
Shows which audio language has
been selected.
En
95
Appendix
Additional Information
Shows which subtitle language
has been selected.
Shows the category name.
Shows which viewing angle has
been selected.
Shows the folder name of the folder
containing the MP3/WMA/AAC file
currently being played.
Shows which audio output has
been selected.
Shows the file name of the MP3/
WMA/AAC file currently being
played.
Shows the preset number of the station currently being tuned in to.
Area 2
Shows the disc title of the CD text
disc currently being played.
Shows the song title when receiving
the tag information.
Shows the track title of the track currently being played for CD text discs.
Shows the song title of the song currently being played for MP3/WMA/
AAC files.
CH
Shows the channel currently being
tuned in to.
Shows SIRIUS information.
Area 3
Shows the comment currently being
played.
Shows the title number currently
being played.
Shows the station name currently
tuned in to.
Shows the chapter number currently being played.
Shows the artist name when receiving the tag information.
Shows the artist name of the track/
song currently being played for CD
text discs.
Shows the artist name of the artist
currently being played for MP3/
WMA/AAC files.
Shows the replay time currently
being played.
Shows when the game alert function is on while receiving SIRIUS
stations.
Shows the genre of the track/song
currently being played.
Shows cellular phone information.
Indicates that the feature demo is
on.
Shows general phone information.
Shows home phone information.
Shows office phone information.
Shows other phone information.
from Caradio-Manual.com Manuals
96 Downloaded
En
Appendix
Additional Information
Handling guidelines
Read the precautions for discs before using them.
Discs and player
Certain functions may not be available for some DVD
video discs.
Use only discs featuring any of following logos.
It may not be possible to play back some DVD video
discs.
It is not possible to play back DVD-RAM discs.
This unit is not compatible with discs recorded in
AVCHD (Advanced Video Codec High Definition) format. Do not insert AVCHD discs as you may not be
able to eject the disc.
Use 12-cm discs. Do not use 8-cm discs or an adapter
for 8-cm discs.
Use only conventional, fully circular discs. Do not use
shaped discs.
Depending on the external storage device (USB, SD),
the following problems may occur.
! Operations may vary.
! The storage device may not be recognized.
! Files may not be played back properly.
USB storage device
Connections via USB hub are not supported.
Additional Information
External storage device (USB, SD)
Do not connect anything other than a USB storage
device.
Do not insert anything other than a DVD (-R/-RW) or
CD (-R/-RW) into the disc loading slot.
Do not use cracked, chipped, warped, or otherwise
damaged discs as they may damage the player.
Unfinalized CD-R/CD-RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals to
the surface of the discs.
To clean a disc, wipe the disc with a soft cloth outward from the center.
Condensation may temporarily impair the player’s
performance. Let it rest for about one hour to adjust
to a warmer temperature. Also, wipe any damp discs
off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded application, playback environment, storage conditions, and
so on.
Firmly secure the USB storage device when driving.
Do not let the USB storage device fall onto the floor,
where it may become jammed under the brake or accelerator pedal.
Depending on the USB storage device, the device
may cause noise to occur in the radio.
Copyright protected files that are stored in the USB
devices cannot be played back.
You cannot connect a USB portable audio player/USB
memory to this unit via USB hub.
Partitioned USB memory is not compatible with this
unit.
Depending on the kind of USB portable audio player/
USB memory you use, the device may not be recognized or audio files may not be played back properly.
Do not leave the USB portable audio player/USB
memory in direct sunlight for extended amounts of
time. Doing so may cause the device to malfunction
from the extreme rise in temperature.
Road shocks may interrupt disc playback.
Downloaded from Caradio-Manual.com Manuals
En
97
Appendix
Additional Information
SD memory card
This unit supports only the following types of SD
memory cards.
! SD
! SDHC
Keep the SD memory card out of the reach of children. Should the SD memory card be swallowed, consult a doctor immediately.
Do not touch the connectors of the SD memory card
directly with your fingers or with any metal device.
Do not insert anything other than an SD memory card
into the SD card slot. If a metal object (such as a
coin) is inserted into the slot, the internal circuits may
break and cause malfunctions.
Do not insert a damaged SD memory card (e.g.
warped, label peeled off) as it may not be ejected
from the slot.
Do not try to force an SD memory card into the SD
card slot as the card or this unit may be damaged.
When ejecting an SD memory card, press it and hold
it until it clicks. It is dangerous for you to release your
finger immediately after you press on the card as the
card may shoot out of the slot and hit you in the face,
etc. If the card shoots out of the slot, it may become
lost.
iPod
To ensure proper operation, connect the dock connector cable from the iPod directly to this unit.
Firmly secure the iPod when driving. Do not let the
iPod fall onto the floor, where it may become jammed
under the brake or accelerator pedal.
About iPod settings
! When an iPod is connected, this unit changes the
EQ (equalizer) setting of the iPod to off in order to
optimize the acoustics. When you disconnect the
iPod, the EQ returns to the original setting.
! You cannot set Repeat to off on the iPod when
using this unit. Repeat is automatically changed
to All when the iPod is connected to this unit.
Incompatible text saved on the iPod will not be displayed by the unit.
DVD-R/DVD-RW discs
Unfinalized DVD-R/-RW discs which have been recorded in the Video format (video mode) cannot be
played back.
Playback of DVD-R/DVD-RW discs may not be possible, due to disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc. on the lens of this
unit.
Depending on the application settings and the environment, playback of discs recorded on a personal
computer may not be possible. (For details, contact
the manufacturer of the application.)
CD-R/CD-RW discs
When CD-R/CD-RW discs are used, playback is possible only for discs which have been finalized.
Playback of CD-R/CD-RW discs recorded on a music
CD recorder or a personal computer may not be possible due to disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc., on the lens of this
unit.
Depending on the application settings and the environment, playback of discs recorded on a personal
computer may not be possible. (For details, contact
the manufacturer of the application.)
Playback of CD-R/CD-RW discs may become impossible in case of direct exposure to sunlight, high temperatures, or the storage conditions in the vehicle.
Titles and other text information recorded on a CD-R/
CD-RW disc may not be displayed by this unit (in the
case of audio data (CD-DA)).
DualDiscs
DualDiscs are two-sided discs that have a recordable
CD for audio on one side and a recordable DVD for
video on the other.
Playback of the DVD side is possible with this unit.
However, since the CD side of DualDiscs is not physically compatible with the general CD standard, it may
not be possible to play the CD side with this unit.
Frequent loading and ejecting of a DualDisc may result in scratches on the disc. Serious scratches can
lead to playback problems on this unit. In some
cases, a DualDisc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using DualDisc with this unit.
Please refer to the information from the disc manufacturer for more detailed information about
DualDiscs.
from Caradio-Manual.com Manuals
98 Downloaded
En
Appendix
Additional Information
JPEG picture files
JPEG is short for Joint Photographic Experts Group
and refers to a still image compression technology
standard.
Files are compatible with Baseline JPEG and EXIF 2.1
still images up to a resolution of 8 192 × 7 680. (EXIF
format is used most commonly with digital still cameras.)
Playback of EXIF format files that were processed by a
personal computer may not be possible.
Compressed audio
compatibility (disc, USB, SD)
WMA
File extension: .wma
Bit rate: 5 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
Windows Media Audio Professional, Lossless, Voice/
DRM Stream/Stream with video: Not compatible
MP3
DivX video files
Depending on the composition of the file information,
such as the number of audio streams or file size,
there may be a slight delay when playing back discs.
Some special operations may be prohibited due to
the composition of the DivX files.
Only DivX files downloaded from a DivX partner site
are guarantee for proper operation. Unauthorized
DivX files may not operate properly.
DRM rental files cannot be operated until playback is
started.
Recommended file size: 2 Mbps or less with a transmission rate of 2 GB or less.
The ID code of this unit must be registered to a DivX
VOD provider in order to playback DivX VOD files. For
information on ID codes, refer to Displaying the DivXâ
VOD registration code on page 64.
For more details about DivX, visit the following site:
http://www.divx.com/
Important
! When naming a JPEG image file, add the corresponding filename extension (.jpg, .jpeg, .
jpe or .jfif).
! This unit plays back files with these filename
extensions (.jpg, .jpeg, .jpe or .jfif) as a JPEG
image file. To prevent malfunctions, do not
use these extensions for files other than JPEG
image files.
File extension: .mp3
Bit rate: 8 kbps to 320 kbps
Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz,
48 kHz for emphasis)
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3 (ID3 tag
Version 2.x is given priority over Version 1.x.)
M3u playlist: Not compatible
Additional Information
There is no progressive JPEG compatibility.
MP3i (MP3 interactive), mp3 PRO: Not compatible
AAC
Compatible format: AAC encoded by iTunes
File extension: .m4a
Sampling frequency: 8 kHz to 44.1 kHz
Bit rate: 8 kbps to 320 kbps
Apple Lossless: Not compatible
AAC file bought from the iTunes Store (.m4p file extension): Not compatible
DivX compatibility
Compatible format: DivX video format implemented in
relation to DivX standards
File extensions: .avi or .divx
DivX Ultra format: Not compatible
DivX HD format: Not compatible
DivX files without video data: Not compatible
DivX plus: Not compatible
Compatible audio codec: MP2, MP3, Dolby Digital
Downloaded from Caradio-Manual.com Manuals
En
99
Appendix
Additional Information
LPCM: Not compatible
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
Compatible external subtitle file extension: .srt
Supplemental information
Some characters in a file name (including the file extension) or a folder name may not be displayed.
This unit may not operate correctly depending on the
application used to encode WMA files.
There may be a slight delay at the start of playback of
audio files embedded with image data or audio files
stored on an external storage device (USB/SD) that
has numerous folder hierarchies.
Disc
Playable folders: up to 700
Playable files: up to 999 for CD-R/CD-RW
Playable files: up to 3 500 for DVD-R/DVD-RW
File system: ISO 9660 Level 1 and 2, Romeo, Joliet,
UDF 1.02 (DVD-R/DVD-RW)
Multi-session playback: Compatible
Packet write data transfer: Not compatible
Regardless of the length of blank sections between
the songs from the original recording, compressed
audio discs play with a short pause between songs.
External storage device (USB, SD)
CAUTION
! Pioneer accepts no responsibility for data lost
on the USB memory/USB portable audio
player/SD memory card even if that data is
lost while using this unit.
! Do not leave the discs/external storage device
(USB, SD) or iPod in places with high
temperatures.
iPod compatibility
This unit supports only the following iPod models.
Supported iPod software versions are shown below.
Older versions may not be supported.
! iPhone 4 (software version 4.1)
! iPhone 3GS (software version 4.1)
! iPhone 3G (software version 4.1)
! iPhone (software version 3.1.3)
! iPod nano 5th generation (software version 1.0.2)
! iPod nano 4th generation (software version 1.0.4)
! iPod nano 3rd generation (software version 1.1.3)
! iPod nano 2nd generation (software version 1.1.3)
! iPod nano 1st generation (software version 1.3.1)
! iPod touch 3rd generation (software version 4.0)
! iPod touch 2nd generation (software version 4.0)
! iPod touch 1st generation (software version 3.1.3)
! iPod classic 160GB (software version 2.0.4)
! iPod classic 120GB (software version 2.0.1)
! iPod classic (software version 1.1.2)
! iPod 5th generation (software version 1.3)
Depending on the generation or version of the iPod,
some functions may not be available.
Operations may vary depending on the software version of iPod.
Playable folders: up to 6 000
Playable files: up to 65 535, up to 255 for one folder
Playback of copyright-protected files: Not compatible
Partitioned external storage device (USB, SD): Only
the first playable partition can be played.
There is no compatibility for Multi Media Cards
(MMC).
When using an iPod, an iPod Dock Connector to USB
Cable is required.
When you use Pioneer CD-IU50V/CD-IU200V interface
cable, consult your dealer for details.
About the file/format compatibility, refer to the iPod
manuals.
Audio Book, Podcast: Compatible
Compatibility with all SD memory cards is not guaranteed.
This unit is not compatible with SD-Audio/SD-Video.
CAUTION
Pioneer accepts no responsibility for data lost on
the iPod, even if that data is lost while this unit is
used.
from Caradio-Manual.com Manuals
100Downloaded
En
Appendix
Additional Information
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
Example of a hierarchy
01
02
03
05
Level 1 Level 2 Level 3 Level 4
: Folder
: Compressed
audio file
01 to 05: Folder
number
1 to 6: Playback
sequence
Disc
Folder selection sequence or other operation
may differ depending on the encoding or writing software.
External storage device (USB, SD)
The playback sequence is the same as the recorded sequence in the external storage device (USB, SD).
To specify the playback sequence, the following method is recommended.
1 Create a file name that includes numbers that
specify the playback sequence (e.g., 001xxx.
mp3 and 099yyy.mp3).
2 Put those files into a folder.
3 Save the folder that contains the files to the
external storage device (USB, SD).
However, depending on the system environment, you may not be able to specify the playback sequence.
For USB portable audio players, the sequence
is different and depends on the player.
Using the display correctly
Handling the display
! Never touch the screen with anything besides your finger when operating the touch
panel function. The screen can scratch easily.
! When the display is subjected to direct sunlight for a long period of time, it will become very hot resulting in possible
damage to the LCD screen. You should
avoid exposing the display unit to direct
sunlight as much as possible.
! The display should be used within the temperature range of –10°C to +60°C (14 °F to
140 °F).
At temperatures higher or lower than this
operating temperature range, the display
may not operate normally.
! The LCD screen is exposed in order to increase its visibility within the vehicle. Do
not press it strongly on it as this may damage it.
! Do not push the LCD screen forcefully as
this may scratch it.
Additional Information
04
PIONEER Service Station. Do not use the unit
in this condition because doing so may result
in fire, electric shock, or other failure.
! If you notice smoke, a strange noise or smell,
or any other abnormal signs from the display,
turn off the power immediately and consult
your dealer or the nearest authorized
PIONEER Service Station. Using this unit in
this condition may result in permanent damage to the system.
! Do not disassemble or modify this unit, as
there are high-voltage components inside
which may cause electric shock. Be sure to
consult your dealer or the nearest authorized
PIONEER Service Station for internal inspection, adjustments, or repairs.
CAUTION
! If liquid or foreign matter should get inside
this unit, turn off the power immediately and
consult your dealer or the nearest authorized
Downloaded from Caradio-Manual.com Manuals
En
101
Appendix
Additional Information
Liquid crystal display (LCD) screen
! Heat from the heater may damage the LCD
screen, and cool air from the cooler may
cause moisture to form inside the display
resulting in possible damage.
! Small black dots or white dots (bright dots)
may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a malfunction.
! When using a cellular phone, keep the antenna away from the display to prevent disruption of the video image by the
appearance of spots, colored stripes, etc.
LED (light-emitting diode)
backlight
! At low temperatures, using the LED backlight may increase image lag and degrade
the image quality due to the characteristics
of the LCD screen. Image quality will improve with an increase in temperature.
! To protect the LED backlight, the display
will darken in the following environments:
— In the direct sunlight
— Near the heater vent
! The product lifetime of the LED backlight is
more than 10 000 hours. However, it may
decrease if used in high temperatures.
! If the LED backlight reaches the end of its
product lifetime, the screen will become
dark and the image will no longer be projected. In such cases, please consult your
dealer or the nearest authorized PIONEER
Service Station.
Copyright and trademark
This item incorporates copy protection technology that is protected by U.S. patents and
other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
Bluetooth
The Bluetoothâ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Pioneer
Corporation is under license. Other trademarks and trade names are those of their respective owners.
! Bluetooth is a short-range wireless radio
connectivity technology that is developed
as a cable replacement for mobile phones,
handheld PCs and other devices. Bluetooth
operates in 2.4 GHz frequency range and
transmits voice and data at speeds up to 1
megabit per second. Bluetooth was
launched by a special interest group (SIG)
that comprises of Ericsson Inc., Intel Corp.,
Nokia Corp., Toshiba and IBM in 1998, and
it is currently developed by nearly 2 000
companies worldwide.
DVD video
is a trademark of DVD Format/Logo
Licensing Corporation.
iTunes
Apple and iTunes are trademarks of Apple
Inc., registered in the U.S. and other countries.
Keeping the display in good
condition
! When removing dust from the screen or
cleaning the display, first turn the system
power off, then wipe with a soft dry cloth.
! When wiping the screen, take care not to
scratch the surface. Do not use harsh or
abrasive chemical cleaners.
from Caradio-Manual.com Manuals
102Downloaded
En
Appendix
Additional Information
WMA
Windows Media is either a registered trademark or trademark of Microsoft Corporation in
the United States and/or other countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
SD memory card
SD Logo is a trademark of SD-3C, LLC.
SDHC Logo is a trademark of SD-3C, LLC.
iPod & iPhone
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
Dolby Digital
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
DivX
DivXâ, DivX Certifiedâ and associated logos
are trademarks of DivX, Inc. and are used
under license.
ABOUT DIVX VIDEO: DivXâ is a digital
video format created by DivX, Inc. This is an official DivX Certifiedâ device that plays DivX
video. Visit divx.com for more information and
software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certifiedâ device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in
Menu operations. Go to vod.divx.com for more
information on how to complete your registration.
Additional Information
MP3
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/
or other networks or in other electronic content distribution systems, such as pay-audio or
audio-on-demand applications. An independent license for such use is required. For details, please visit
http://www.mp3licensing.com.
About the SAT RADIO READY mark
The SAT RADIO READY mark indicates that
the Satellite Radio Tuner for Pioneer (i.e., XM
tuner and Sirius satellite tuner which are sold
separately) can be controlled by this unit.
Please inquire to your dealer or nearest
authorized Pioneer service station regarding
the satellite radio tuner that can be connected
to this unit. For satellite radio tuner operation,
please refer to the satellite radio tuner owner’s
manual.
Downloaded from Caradio-Manual.com Manuals
En
103
Appendix
Additional Information
! The system will use direct satellite-to-receiver broadcasting technology to provide listeners in their cars and at home with
crystal-clear sound seamlessly from coast
to coast. Satellite radio will create and
package over 100 channels of digital-quality
music, news, sports, talk and children’s
programming.
! “SAT Radio”, the SAT Radio logo and all related marks are trademarks of Sirius Satellite Radio Inc., and XM Satellite Radio Inc.
HD Radioä Technology
! This HD Radio Ready receiver is ready to receive HD Radio broadcasts when connected to the HD Radio tuner (e.g. GEXP20HD), sold separately.
HD Radioä, HD Radio Readyä, and the
HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation.
Pandora
Pandora is a registered trademark of Pandora
Media, Inc.
from Caradio-Manual.com Manuals
104Downloaded
En
Appendix
Additional Information
Language code chart for DVD
Kurdish (ku), 1121
Komi (kv), 1122
Cornish (kw), 1123
Kirghiz, Kyrgyz (ky), 1125
Latin (la), 1201
Luxembourgish (lb), 1202
Ganda (lg), 1207
Limburgan (li), 1209
Lingala (ln), 1214
Lao (lo), 1215
Lithuanian (lt), 1220
Luba-Katanga (lu), 1221
Latvian (lv), 1222
Malagasy (mg), 1307
Marshallese (mh), 1308
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Bokmal (nb), 1402
Ndebele, North (nd), 1404
Nepali (ne), 1405
Ndonga (ng), 1407
Nynorsk (nn), 1414
Norwegian (no), 1415
Ndebele, South (nr), 1418
Navajo, Navaho (nv), 1422
Chichewa (ny), 1425
Occitan (oc), 1503
Ojibwa (oj), 1510
Oromo (om), 1513
Oriya (or), 1518
Ossetian (os), 1519
Panjabi, Punjabi (pa),
1601
Pali (pi), 1609
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Romansh (rm), 1813
Corsican (co), 0315
Kikuyu, Gikuyu (ki), 1109
Cree (cr), 0318
Czech (cs), 0319
Church Slavic (cu), 0321
Chuvash (cv), 0322
Welsh (cy), 0325
Kuanyama (kj), 1110
Kazakh (kk), 1111
Kalaallisut (kl), 1112
Central Khmer (km), 1113
Kannada (kn), 1114
Danish (da), 0401
Kanuri (kr), 1118
Rundi (rn), 1814
Divehi (dv), 0422
Kashmiri (ks), 1119
Romanian (ro), 1815
Downloaded from Caradio-Manual.com Manuals
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sardinian (sc), 1903
Sindhi (sd), 1904
Northern Sami (se), 1905
Sangho (sg), 1907
Sinhala (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Swati (ss), 1919
Sotho, Southern (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Tswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Tahitian (ty), 2025
Uighur, Uyghur (ug), 2107
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Venda (ve), 2205
Vietnamese (vi), 2209
Additional Information
Language (code), input code
Japanese (ja), 1001
Dzongkha (dz), 0426
English (en), 0514
Ewe (ee), 0505
French (fr), 0618
Esperanto (eo), 0515
Spanish (es), 0519
Estonian (et), 0520
German (de), 0405
Basque (eu), 0521
Italian (it), 0920
Persian (fa), 0601
Chinese (zh), 2608
Fulah (ff), 0606
Dutch, Flemish (nl), 1412
Finnish (fi), 0609
Portuguese (pt), 1620
Fijian (fj), 0610
Swedish (sv), 1922
Faroese (fo), 0615
Russian (ru), 1821
Western Frisian (fy), 0625
Korean (ko), 1115
Irish (ga), 0701
Greek (el), 0512
Gaelic (gd), 0704
Afar (aa), 0101
Galician (gl), 0712
Abkhazian (ab), 0102
Guarani (gn), 0714
Avestan (ae), 0105
Gujarati (gu), 0721
Afrikaans (af), 0106
Manx (gv), 0722
Akan (ak), 0111
Hausa (ha), 0801
Amharic (am), 0113
Hebrew (he), 0805
Aragonese (an), 0114
Hindi (hi), 0809
Arabic (ar), 0118
Hiri Motu (ho), 0815
Assamese (as), 0119
Croatian (hr), 0818
Avaric (av), 0122
Haitian (ht), 0820
Aymara (ay), 0125
Hungarian (hu), 0821
Azerbaijani (az), 0126
Armenian (hy), 0825
Bashkir (ba), 0201
Herero (hz), 0826
Belarusian (be), 0205
Interlingua (ia), 0901
Bulgarian (bg), 0207
Indonesian (id), 0904
Bihari (bh), 0208
Interlingue (ie), 0905
Bislama (bi), 0209
Igbo (ig), 0907
Bambara (bm), 0213
Sichuan Yi (ii), 0909
Bengali (bn), 0214
Inupiaq (ik), 0911
Tibetan (bo), 0215
Ido (io), 0915
Breton (br), 0218
Icelandic (is), 0919
Bosnian (bs), 0219
Inuktitut (iu), 0921
Catalan (ca), 0301
Javanese (jv), 1022
Chechen (ce), 0305
Georgian (ka), 1101
Chamorro (ch), 0308
Kongo (kg), 1107
Volapük (vo), 2215
Walloon (wa), 2301
Wolof (wo), 2315
Xhosa (xh), 2408
Yiddish (yi), 2509
Yoruba (yo), 2515
Zhuang, Chuang (za),
2601
Zulu (zu), 2621
En
105
Appendix
Additional Information
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Maximum current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
D
Chassis ..................... 178 mm × 100 mm ×
165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.)
Nose ........................... 171 mm × 97 mm × 18 mm
(6-3/4 in.× 3-7/8 in.× 3/4 in.)
(AVH-P4300DVD)
Nose ........................... 171 mm × 97 mm × 7 mm
(6-3/4 in. × 3-7/8 in. × 1/4 in.)
(AVH-P3300BT)
Weight .......................................... 2.2 kg (4.84 lbs)
(AVH-P4300DVD)
Weight .......................................... 1.8 kg (4.0 lbs)
(AVH-P3300BT)
Display
Screen size/aspect ratio ....... 6.95 inch wide/16:9
(effective display area:
156.4 × 81.7 mm)
(AVH-P4300DVD)
Screen size/aspect ratio ....... 5.8 inch wide/16:9
(effective display area:
128.4 × 70.9 mm)
(AVH-P3300BT)
Pixels ............................................. 345 600 (1 440 × 240)
Display method ........................ TFT active matrix, driving
type
Color system .............................. NTSC
Durable temperature range (power off)
..................................................... –20 °C to +80 °C
Audio
Maximum power output ....... 50 W × 4
70 W × 1/2 W (for subwoofer)
Continuous power output ... 22 W × 4 (50 Hz to
15 000 Hz, 5 % THD,
4 W load, both channels driven)
Load impedance ...................... 4 W (4 W to 8 W (2 W for 1
ch) allowable)
Preout maximum output level
..................................................... 4.0 V
Equalizer (8-Band Graphic Equalizer):
Frequency .......................... 40/80/200/400/1k/2.5k/8k/
10 kHz
Gain ...................................... ±12 dB
HPF:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... –12 dB/oct
Subwoofer (mono):
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... +6 dB to –24 dB
Phase .................................. Normal/Reverse
Bass boost:
Gain ...................................... +12 dB to 0 dB
DVD Player
System .......................................... DVD video, Video CD, CD,
WMA, MP3, AAC, DivX,
JPEG system
Usable discs .............................. DVD video, Video CD, CD,
CD-R/RW, DVD-R/RW/R DL
Region number ........................ 1
Frequency response ............... 5 Hz to 44 000 Hz (with DVD,
at sampling frequency
96 kHz)
Signal-to-noise ratio ............... 96 dB (1 kHz) (IHF-A network) (RCA level)
Output level:
Video .................................... 1.0 Vp-p/75 W (±0.2 V)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
AAC decoding format ............ MPEG-4 AAC (iTunes encoded only) (.m4a)
(Ver. 8.2 and earlier)
DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,
6 (.avi, .divx)
USB
USB standard specification
..................................................... USB 1.1, USB 2.0 full speed
Maximum current supply .... 500 mA
USB Class ................................... MSC (Mass Storage Class)
File system .................................. FAT16, FAT32
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
from Caradio-Manual.com Manuals
106Downloaded
En
Appendix
Additional Information
AAC decoding format ............ MPEG-4 AAC (iTunes encoded only)
(Ver. 8.2 and earlier)
DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,
6 (.avi, .divx)
SD
Additional Information
Compatible physical format
..................................................... Version 1.10
File system .................................. FAT12, FAT16, FAT32
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
AAC decoding format ............ MPEG-4 AAC (iTunes encoded only)
(Ver. 8.2 and earlier)
DivX decoding format ............ Home Theater Ver. 3, 4, 5.2,
6 (.avi, .divx)
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 72 dB (IHF-A network)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz
(10 kHz)
Usable sensitivity ..................... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IHF-A network)
Bluetooth
(AVH-P3300BT)
Version .......................................... Bluetooth 2.0 certified
Output power ............................ +4 dBm Max.
(Power class 2)
CEA2006 Specifications
Power output ............................. 14 W RMS × 4 Channels (4
W and ≦ 1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
4 W)
Note
Specifications and the design are subject to modifications without notice.
Downloaded from Caradio-Manual.com Manuals
En
107
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202 Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
台北市內湖區瑞光路407號8樓
電話: (02) 2657-3588
先鋒電子(香港)有限公司
香港九龍尖沙咀海港城世界商業中心
9樓901-6室
電話: (0852) 2848-6488
Published by Pioneer Corporation.
Copyright ã 2010 by Pioneer Corporation.
All rights reserved.
Printed in Thailand
Downloaded
from Caradio-Manual.com
<KOMZX>
<10K00000>
Manuals
<QRB3126-B/N> UC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising