QUICK START GUIDE Wireless Presentation & Collaboration System videos, and more.

QUICK START GUIDE Wireless Presentation & Collaboration System videos, and more.
Wireless Presentation & Collaboration System
QUICK START GUIDE
To learn more, please visit www.vivtekcorp.com for user manuals, software, training
videos, and more.
PACKAGE CONTENTS
1
2
NovoPRO
4
3
HDMI-to-HDMI Cable
5
Micro-USB-to-USB Power Cable
6
Mode
Pg
Pg
Wall Mount
1
USB Power Adapter
Remote Control
NovoPRO OVERVIEW
1
2
3
4
5
6
1
RJ45 (Ethernet) Port
2
USB Port
3
HDMI Port
4
DC 5V Power Jack
5
Kensington® Security Slot
6
microSD Card Slot
SETTING UP NovoPRO
Hardware Installation
HDMI Port: Connect to a projector.
DC 5V Power Jack: Connect to the USB power adapter using the
supplied USB cable.
USB Port: Connect to a USB flash drive, mouse or keyboard.
Ethernet Connection (Optional)
RJ45 (Ethernet) Port: Connect to a wired network via an Ethernet
cable.
2
SETTING UP NovoPRO
WiFi Setup
There are two ways to connect to NovoPRO:
Hotspot Mode
NovoPRO’s default setting is set
to Hotspot mode. The connection
is made directly to the SSID
broadcasted by the device.
3
Wireless AP Mode
NovoPRO can also be connected
to an existing WiFi network simply
by connecting the devices to the
same network. Tap the WiFi button
to proceed.
GETTING STARTED
1 Install the app.
•For tablet/smartphone: Download
NovoPresenter from the iOS App Store or from
Google Play.
•For Windows/Mac computer: Download
Desktop Streamer from the Vivitek website
(www.vivitekcorp.com).
•For Chromebook: Download Desktop Streamer
from the Chrome Web Store.
2 Connect the tablet/smartphone, computer or Chromebook to the same
network as the NovoPRO. Follow the device’s WiFi procedures for
connecting to the WiFi network.
3 Launch NovoPresenter or Desktop Streamer.
4 Scan the QR code or manually input the
device’s IP address and PIN code (if
needed) to connect.
The device screen will appear
automatically upon successful connection.
4
SCREEN MIRRORING
NovoPRO supports direct mirroring of Android™ and iOS device screens.
1 Connect the Android™ or iOS device to the same WiFi network as the
NovoPRO. Then, follow the mirroring setup instructions for the selected
Android™ or iOS device.
•For Android devices, this is referred to as Miracast®, Screen Mirroring, Cast
Screen, etc.
•For iOS devices, this is called AirPlay®.
5
ADDITIONAL INFORMATION
Safety & Warning Information
FCC – Federal Communication Commission (USA)
This device contains the following wireless device and underwent the
certification process of FCC CFR 47 PART 15 SUBPART C: Oct. 2102 under
the respective FCC ID below:
•FCCID: H79ESS1310
The FCC ID is indicated as the label affixed on the bottom side of your device.
CE - Conformité Européenne (EU)
This device intended for sale within the European Union are marked with the
Conformité Européenne (CE) Marking, which indicates compliance with the
applicable Directives and European Norms, and amendments, the following
standard were applied:
•EN55022-24:2010
•EN301 489-1 V1.9.2: 2011-09
•EN301 489-17 V2.2.1: 2012-09
•EN300 328 V1.7.1: 2006
•EN 301 893 V1.6.1: 2011 /EN62311:2008
6
Vivitek
4F, No. 186, Ruey Kuang Road, Neihu, Taipei 11491,
Taiwan R.O.C.
T: +886-2-8797-2088
F: +886-2-6600-2358
www.vivitekcorp.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising